Texas Instruments

PCM1728E/2K 24-Bit 96kHz Stereo I2S DAC | Texas Instruments

MPN: PCM1728E/2K ✗ סוף ייצור
28-pin SSOP (DB) Package
כמות הזמנה מינימלית: 1 |

PCM1728E/2K סקירה

The Texas Instruments PCM1728E/2K is a 24-bit, 96kHz sampling CMOS delta-sigma stereo audio digital-to-analog converter with an I2S interface, packaged in a 28-pin SSOP (DB) package. It is designed for digital audio systems requiring two-channel analog output from an I2S-compatible source, including consumer audio equipment, communications systems, and embedded audio products.

A stereo DAC is a digital-to-analog converter that accepts digital audio samples and produces left- and right-channel analog signals. The PCM1728E/2K belongs to the broader ADC/DAC and audio interface IC hierarchy, combining a digital audio interface with two analog output channels. Its 24-bit resolution supports high-fidelity audio data formats, while the 96kHz sampling capability provides sufficient bandwidth for CD-quality and other high-rate digital audio streams.

The PCM1728E/2K uses an I2S serial interface for receiving digital audio data. This interface is widely used in audio processors, receivers, CD/DVD systems, digital mixing equipment, and other embedded audio platforms. The device is implemented in CMOS and is identified in the product documentation as a 24-bit, 96kHz sampling delta-sigma stereo DAC. The package is the TI 28-pin SSOP DB configuration.

The /2K ordering suffix identifies the particular TI orderable package variant. The PCM1728E family is listed by TI as a 106dB SNR stereo DAC with 28 pins in the SSOP DB package. The PCM1728E/2K listing identifies the part as a 24-bit, 96kHz I2S stereo DAC in a 28-SSOP package.

Typical applications include CD/DVD player audio outputs, digital audio receivers, home theater and multimedia equipment, communications terminals, and embedded audio subsystems. Because the converter is a stereo DAC, system designers must provide compatible digital audio timing and data signals and must implement the required analog output and power-supply arrangements described in the manufacturer datasheet.

When laying out a circuit around the PCM1728E/2K, keep digital and analog routing separated, place bypass and decoupling capacitors close to the relevant supply pins, and preserve the package-specific exposed-pin and thermal-land requirements shown in the TI package documentation. Because the exact pin names, voltage ratings, output architecture, and application circuit values are not reproduced in the available product excerpts, use the manufacturer datasheet and package drawing when assigning PCB nets and component values.

This product summary combines the manufacturer product listing, distributor catalog information, and the PCM1728E family identity to help engineers identify the correct stereo DAC and verify package, resolution, sampling-rate, and interface requirements before layout or procurement.

חלופות תחליף ישיר עבור PCM1728E/2K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM1728E/2K (אותו גורם צורה וטביעת רגל) — שונים ב Package.

Texas Instruments
Package: SSOP-28 (DB)

PCM1728E

✅ Drop-In
Texas Instruments
📦 SSOP-28 (DB)
Stereo audio digital-to-analog converter · CMOS delta-sigma · 24 bit · 96 kHz · 2 channels · I2S · 106 dB · 8X at 96 kHz sampling rate

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM1728E/2K דירוגים מרביים ומאפיינים חשמליים

Product Type Stereo audio digital-to-analog converter
Manufacturer Texas Instruments
רזולוציה 24 bit
קצב דגימה 96 kHz
Digital Audio Interface I2S
Architecture CMOS delta-sigma
Channel Count 2 channels
Signal-to-Noise Ratio 106 dB
מארז 28-pin SSOP (DB)
סוג הרכבה Surface mount
Digital Input Format I2S
AEC-Q100 Qualification Not applicable

מדריך תצורת פינים של PCM1728E/2K 28-pin ssop (db)

תצורת פינים עבור PCM1728E/2K (מארזת 28-pin ssop (db)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 28-pin ssop (db) עבור PCM1728E/2K

אין נתוני פריסת פינים מפורטים עבור PCM1728E/2K.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM1728E/2K מתאים עבור 6 יישוםs: CD and DVD Player Audio Output, Digital Audio Receiver, Home Theater and Multimedia System, Communications Terminal Audio, Embedded Audio Processor Subsystem, Digital Mixing and Audio Expansion.

🎧

CD and DVD Player Audio Output

The PCM1728E/2K fits a two-channel digital audio output stage because it accepts 24-bit I2S data and supports sampling rates up to 96kHz. Its stereo delta-sigma DAC architecture provides a straightforward path from a digital audio decoder to left- and right-channel analog outputs. The 28-pin SSOP DB package supports compact consumer-electronics layouts, provided the board follows the manufacturer reference circuit. Designers should preserve clean grounds, provide the required clocking, and use the recommended output and bypass networks. The family-level 106dB SNR figure also provides a useful selection criterion for high-fidelity playback equipment.

🔊

Digital Audio Receiver

PCM1728E/2K is appropriate for digital audio receivers that need stereo analog outputs from an I2S-format source. Its 24-bit resolution and 96kHz sampling capability align with conventional high-quality digital audio streams, while the two-channel architecture matches left and right receiver channels. The converter should sit close to the audio output stage, with digital routing separated from sensitive analog traces. Check the datasheet for required master-clock relationships, supply sequencing, and analog output loading before finalizing the receiver schematic and PCB.

📺

Home Theater and Multimedia System

The PCM1728E/2K can serve as the stereo audio DAC in home-theater front-panel, amplifier, or multimedia designs driven by an I2S-capable decoder. Its 96kHz maximum sampling rate supports high-rate source material, while 24-bit processing provides suitable resolution for consumer and prosum audio. The SSOP-28 footprint allows placement near the output connectors and analog network. Because audio quality also depends on grounding and power cleanliness, use short analog paths, stable reference connections, and the decoupling arrangement specified by TI.

🌐

Communications Terminal Audio

PCM1728E/2K is suitable for communications terminals requiring a compact stereo audio output from a digital speech or multimedia codec. The I2S interface enables integration with common audio processors, and the converter supplies separate left and right analog outputs for line-level downstream amplification. The 24-bit and 96kHz capabilities are useful for multimedia terminals carrying both speech and higher-rate audio. Confirm codec clock polarity, slave or master operation, input latency, and supported audio rate through the full system timing specification.

🧩

Embedded Audio Processor Subsystem

PCM1728E/2K can be paired with an embedded audio processor or DSP that outputs standard I2S data. The converter provides a dedicated analog stage without requiring the host processor to drive external analog circuitry directly. Its 28-pin SSOP package is manageable on multilayer boards, but careful partitioning is needed to prevent digital switching energy from coupling into the stereo outputs. Use continuous ground planes, short output paths, and the recommended capacitor placement at the converter pins. System validation should cover supported sample rates and clock ratios.

⚡

Digital Mixing and Audio Expansion

The PCM1728E/2K can add a stereo I2S-to-analog output channel to digital mixing equipment, active speakers, and professional audio interface modules. Its 24-bit format supports high-resolution internal audio paths, and the 96kHz capability accommodates multirate systems when the upstream mixer supports the corresponding rate. The converter must share a compatible clock domain with the digital source, so clock routing and rate conversion need careful review. The 106dB family SNR specification provides a useful benchmark for evaluating analog performance in multi-channel equipment.

What is the PCM1728E/2K?
The PCM1728E/2K is a Texas Instruments 24-bit, 96kHz sampling CMOS delta-sigma stereo digital-to-analog converter with an I2S interface. According to the TI product listing and distributor catalog records, it is packaged in a 28-pin SSOP DB package. It is intended for systems that require two analog audio output channels generated from digital audio data.
What are the key specifications of PCM1728E/2K?
The PCM1728E/2K provides 24-bit resolution, a 96kHz sampling rate, two stereo output channels, and an I2S digital audio interface. TI describes the PCM1728E family as a 106dB SNR stereo DAC in a 28-pin SSOP DB package. These specifications identify it as a high-resolution audio output converter for digital audio equipment and embedded audio subsystems.
Where can I download the PCM1728E/2K datasheet PDF?
The official manufacturer product page for PCM1728E is the preferred starting point for the datasheet and related documentation. The PCM1728E/2K is the /2K orderable variant of the PCM1728E family. Use the TI PCM1728 product page to obtain the current datasheet, package information, ordering details, and application guidance.
What is the PCM1728E/2K pinout?
The PCM1728E/2K uses the 28-pin SSOP DB package, but the individual pin names and pin numbers are not listed in the available catalog excerpts. Use the pin-description table in the manufacturer PCM1728E datasheet when assigning signal names, supply rails, analog outputs, and control signals. The package drawing should be used alongside the datasheet because SSOP lead numbering must follow the package outline.
How does PCM1728E/2K compare with PCM1728E?
PCM1728E/2K and PCM1728E belong to the same Texas Instruments PCM1728E family and share the 28-pin SSOP DB package. The available comparison listing describes PCM1728E as functionally and terminally consistent with PCM1728E/2K, including consistent package and terminal characteristics. The /2K suffix identifies the specific orderable variant, so confirm temperature, packing, and ordering details before substitution.
Can PCM1798DBR replace PCM1728E/2K?
PCM1798DBR is a relevant comparison candidate, but replacement should not be assumed solely from a feature comparison. Both parts are stereo audio DAC families, yet the PCM1798DBR product identity, control interface, supply requirements, output topology, and timing behavior must be checked against the PCM1728E datasheet. Confirm every pin, voltage, clock, and analog-output connection before treating it as a drop-in replacement.
When should I choose PCM1728E/2K over PCM1798DBR?
Choose PCM1728E/2K when the design specifically targets the PCM1728E 24-bit, 96kHz stereo DAC with an I2S interface and the established 28-pin SSOP implementation. Choose PCM1798DBR only after its datasheet confirms the required interface, supply rails, clocking, and analog-output behavior. For an existing PCM1728E/2K board, the family PCM1728E is the closest documented starting point for a pin-level review.
Is PCM1728E/2K suitable for CD player audio?
PCM1728E/2K is suitable in principle for CD-player and other 96kHz-capable digital audio outputs because it accepts 24-bit I2S data and provides two analog channels. A practical design still requires compatible source timing, an appropriate master clock, correct digital-interface voltage levels, and the output network specified by TI. Confirm all electrical limits in the manufacturer datasheet before releasing the layout.
Where can I buy PCM1728E/2K online?
Use the Request a Quote form on this page to request PCM1728E/2K availability, current pricing, and lead time. The manufacturer and distributor records identify the exact MPN as a 24-bit, 96kHz I2S stereo DAC in a 28-SSOP package, which helps purchasing confirm that the requested part matches the required family and package.
What is the price of PCM1728E/2K?
Use the Request a Quote form on this page for the current PCM1728E/2K unit price and quantity pricing. The available catalog results confirm the exact MPN, manufacturer, package, resolution, sampling rate, and interface, but they do not expose a machine-readable quantity-break table. A formal quote avoids ambiguity between the obsolete /2K variant and other PCM1728E orderable suffixes.
What is the lead time for PCM1728E/2K?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lifecycle status should be checked during that request because an obsolete status can restrict standard-order availability. The exact MPN and package must be stated on the request to avoid substitution with a different PCM1728E suffix.
Is PCM1728E/2K in stock?
Current stock should be confirmed through the Request a Quote form on this page because availability can change with lifecycle status and market conditions. The PCM1728E/2K is identified in catalog results as an obsolete stock item, but that statement does not establish a current, guaranteed inventory quantity. Submit the exact MPN to obtain a lot-specific availability response.
What is the best drop-in replacement for PCM1728E/2K?
PCM1728E is the closest documented family candidate because a comparison record states that its package and terminals are consistent with PCM1728E/2K. It should still be qualified by comparing temperature grade, ordering suffix, clocking, supplies, and analog-output details. Because no second-source cross-reference establishes five verified pin-compatible alternatives, the Request a Quote form should be used to source the exact legacy family member.
Can PCM1754DBQR replace PCM1728E/2K?
PCM1754DBQR is a related TI stereo DAC comparison part, but it should not be treated as a confirmed drop-in replacement for PCM1728E/2K. The comparison material does not establish identical pin assignments, package dimensions, interface behavior, clock requirements, or output circuitry. Review both manufacturer datasheets and perform a complete signal, power, and PCB compatibility audit before substitution.
Is PCM1728E/2K the same as PCM1728E?
PCM1728E/2K is a specific orderable variant of the PCM1728E family, not an unrelated converter. The comparison record identifies PCM1728E and PCM1728E/2K as functionally and terminally consistent, with consistent package characteristics. The exact suffix still controls ordering details, so engineers should confirm the manufacturer ordering table and required environmental grade before treating the two MPNs as interchangeable.
How do I design a PCB for PCM1728E/2K?
Use the 28-pin SSOP DB package drawing and the manufacturer application circuit as the layout basis. Keep I2S clock and data routing away from analog output traces, place bypass capacitors close to the associated supply pins, and maintain a continuous ground reference for the converter. Component values and the exact pinout should come from the PCM1728E datasheet because those details are not available in the catalog excerpt.

נתוני עזר הנדסיים עבור PCM1728E/2K — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM1728E/2K when the original design specifies the exact Texas Instruments /2K orderable variant and requires a 24-bit, 96kHz, two-channel I2S delta-sigma DAC in the 28-pin SSOP DB package. PCM1728E is the closest documented alternative because its family records show the same resolution, sampling rate, interface, package, and 106dB SNR; verify ordering and temperature details before substitution. PCM1798DBR and PCM1754DBQR are relevant TI DAC comparison parts, but the available material does not establish that either is pin-to-pin compatible with the PCM1728E/2K land pattern, so they should not be treated as drop-in replacements without a complete datasheet and board-level review. For new production, favor a currently supported stereo DAC with a modern footprint unless continuity with the PCM1728E/2K design is a strict requirement.

השוואה עם חלופות

פרמטר מוצר זה PCM1728E
Product Type Stereo audio DAC Stereo audio DAC
Brand Texas Instruments Texas Instruments
Package SSOP-28 (DB) SSOP-28 (DB)
Resolution 24 bit 24 bit
Sampling Rate 96 kHz 96 kHz
Digital Interface I2S I2S
Channel Count 2 channels 2 channels
Signal-to-Noise Ratio 106 dB 106 dB
Architecture CMOS delta-sigma CMOS delta-sigma

מבדילים עיקריים

  • Documented family-level signal-to-noise ratio (לעומתPCM1728E)
  • Exact high-resolution stereo conversion capability (לעומתPCM1728E)
  • Established 28-pin SSOP DB implementation (לעומתPCM1728E)

הערות תכנון

Keep the I2S data, clock, and control traces on the digital side of the layout, and route analog outputs directly toward the output network without crossing high-current switching paths. Place bypass capacitors at the pins identified in the manufacturer application circuit and maintain an uninterrupted ground plane under the SSOP footprint. This separation reduces digital-to-analog coupling in a converter whose family-level SNR is specified at 106dB.

Verify the complete audio clock chain, including source mode, master-clock ratio, bit alignment, and sample rate. The I2S label alone does not establish compatibility with every digital source. Use the PCM1728E timing diagrams to set data latency and signal polarity correctly, and avoid substituting a generic I2S component without reviewing its clock requirements and supported sampling rate.

Do not treat every PCM1728E suffix as automatically interchangeable with PCM1728E/2K. Confirm package, ordering suffix, environmental grade, and lifecycle status in the TI ordering information before release. Also confirm that the obsolete-status designation for the /2K variant does not unintentionally remove electrical changes needed by an existing design.

Use the TI DB-package land pattern and account for the 0.63mm pin pitch when defining solder-mask and copper features. Check courtyard and assembly-rule constraints because the SSOP leads are closely spaced. Place analog output components on the connector side of the converter and digital components on the opposite side to make signal-flow direction unambiguous and reduce crosstalk.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available catalog excerpts do not state the required compliance status for the exact PCM1728E/2K orderable variant. AEC-Q100 is not applicable because this is an audio converter rather than an automotive-qualified device.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

PCM1728E/2K datasheet PCM1728E/2K datasheet pdf PCM1728E/2K pinout PCM1728E/2K equivalent PCM1728E/2K replacement PCM1728E/2K cross reference PCM1728E/2K price PCM1728E/2K stock PCM1728E/2K footprint PCM1728E/2K application circuit PCM1728E/2K vs PCM1728E Texas Instruments PCM1728E/2K 24 bit 96kHz stereo I2S DAC SSOP-28 audio DAC

רכיבים ומונחים קשורים

Texas Instruments PCM1728E/2K PCM1728E PCM1798DBR PCM1754DBQR digital-to-analog converter stereo DAC audio DAC delta-sigma DAC ADC/DAC audio interface IC I2S 24-bit resolution 96kHz sampling 106dB SNR CMOS SSOP-28 SSOP DB package surface mount CD player digital audio receiver home theater embedded audio RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר