PCM3003E/2K - 20-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3003E/2K ✓ सक्रियPCM3003E/2K अवलोकन
An audio codec is an interface IC that combines analog-to-digital and digital-to-analog conversion with the digital audio interface required to exchange samples with a host processor. The PCM3003 belongs to the broader codec hierarchy of audio interface ICs and power-management-dependent mixed-signal devices, bridging microphone-level or line-level analog signals and a digital audio bus.
The PCM3003E/2K provides a monolithic stereo ADC and DAC, 64-times oversampling, single-ended voltage inputs, and integrated antialiasing filtering. Its specified THD+N reaches -86 dB, making it suitable for consumer audio equipment where signal-chain fidelity must coexist with a compact, low-power implementation. The hardware-control interface simplifies control of operating functions without relying entirely on software commands.
The 20-bit internal converters support 16-bit or 20-bit input and output data, allowing the digital interface to match different source and destination formats. The codec is designed around a 2.7 V to 3.6 V supply range, so system-level audio rails must remain within these limits. Its SSOP-24 package supports conventional surface-mount assembly while preserving compatibility with compact audio boards.
Typical applications include stereo line-input and line-output processing, digital audio recording interfaces, multimedia equipment, and compact consumer audio products. In these systems, the ADC can capture single-ended analog input channels, while the DAC and line-output circuitry can provide analog playback from digital audio data. The integrated filtering and oversampling reduce the amount of external analog filtering required around the converters.
The main design consideration is to treat analog, digital, and ground connections as separate signal paths. Keep serial-clock and data traces away from the analog inputs, provide local bypass capacitance at the supply pins, and use a quiet ground reference for the analog return path. Component values and supported clock configurations should be selected directly from the manufacturer datasheet and its recommended application circuit.
This page consolidates the exact PCM3003E/2K ordering information, electrical specifications, package details, practical applications, and verified drop-in alternatives. It also provides procurement guidance and design notes intended to support faster engineering evaluation while preserving the distinction between documented device ratings and application-specific requirements.
के लिए ड्रॉप-इन विकल्प PCM3003E/2K — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCM3003E/2K (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Analog Input Type, Analog Output Type, Operating Temperature Range, ADC Channel Count, DAC Channel Count.
PCM3003E/2K.B
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PCM3003E
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →PCM3003E/2K विशेषताएं
| ADC Resolution | 20 bit |
| DAC Resolution | 20 bit |
| Input Data Resolution | 16 bit or 20 bit |
| Output Data Resolution | 16 bit or 20 bit |
| ADC Oversampling Ratio | 64 times |
| THD+N | -86 dB |
| Analog Input Type | Single-ended voltage input |
| Analog Output Type | Single-ended voltage output |
| Control Interface | Hardware control |
| Supply Voltage Range | 2.7 V to 3.6 V |
| ऑपरेटिंग तापमान रेंज | -25 C to +85 C |
| पैकेज | 24-pin SSOP (DB) |
| Package Width | 5.30 mm |
| Package Body Width | 0.209 inch |
| Converter Architecture | Monolithic stereo ADC and DAC |
| Antialiasing Filter | Integrated |
| आउटपुट कॉन्फ़िगरेशन | Line-out |
PCM3003E/2K 0.209 inch पिन कॉन्फ़िगरेशन गाइड
PCM3003E/2K (0.209 inch पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCM3003E/2K.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PCM3003E/2K के लिए उपयुक्त है 6 अनुप्रयोगs: Stereo Line-In Audio Interface, Compact Digital Audio Playback, Multimedia Recording Product, Consumer Audio Adapter, Digital Speaker Interface, Embedded Audio Control Module.
Stereo Line-In Audio Interface
PCM3003E/2K fits a stereo line-in interface because it combines two 20-bit ADC paths, single-ended voltage inputs, an integrated antialiasing filter, and 64-times oversampling in one 24-pin SSOP package. The converter supports 16-bit or 20-bit digital data, allowing it to interface with a digital audio host while accepting conventional analog line signals. Its specified THD+N of -86 dB provides the principal distortion target for evaluating the recording path. The analog inputs should remain short and symmetric where possible, while digital clock and data traces should be kept away from the input pins.
Compact Digital Audio Playback
For compact playback equipment, PCM3003E/2K provides a 20-bit stereo DAC, single-ended analog outputs, line-out capability, and 16-bit or 20-bit output-data support within a single low-power codec. The 2.7 V to 3.6 V operating range suits systems built around a regulated 3.3 V audio rail. Using the integrated converter and filtering reduces the number of separate conversion blocks required. Output-stage and load details should be taken from the manufacturer application information, and the analog return should be routed without digital return currents.
Multimedia Recording Product
PCM3003E/2K is suitable for multimedia products that capture stereo analog input while also supporting digital playback. The monolithic ADC and DAC reduce board area by combining conversion functions in one 24-pin SSOP package, while the antialiasing filter and 64-times oversampling support the internal conversion path. Its hardware-control architecture allows operating states to be established by control circuitry rather than depending exclusively on software initialization. The host interface, audio format, and permitted master-clock configuration should be selected from the manufacturer datasheet.
Consumer Audio Adapter
A stereo audio adapter can use PCM3003E/2K to translate single-ended analog signals into digital audio data and provide an analog line output from received digital samples. The device's 20-bit ADC and DAC, -86 dB THD+N specification, and support for both 16-bit and 20-bit data provide a clear performance baseline for consumer applications. Its 24-pin SSOP package supports conventional surface-mount assembly. Adequate supply bypassing, controlled analog grounding, and separation from switching circuitry are essential for preserving the converter performance.
Digital Speaker Interface
PCM3003E/2K can serve as the conversion stage in a digital-speaker system that receives digital audio samples and produces a single-ended analog line-level output. The 20-bit DAC and line-out configuration suit designs that perform amplification and filtering downstream of the codec. Supporting 16-bit or 20-bit output data allows the digital source format to be aligned with the host interface. The output network and amplifier interface should be designed from the datasheet's output specifications, with particular attention to grounding and power-supply isolation.
Embedded Audio Control Module
PCM3003E/2K fits embedded audio modules that need both conversion directions in a limited package area. Hardware control is useful when codec modes must change predictably with system resets or external sequencing, while the monolithic converter architecture limits the number of external conversion ICs. The device operates across -25 C to +85 C and from 2.7 V to 3.6 V, making its operating envelope explicit for embedded product planning. Use the manufacturer's pin and application diagrams to implement reset, clock, and analog-output connections correctly.
के लिए इंजीनियरिंग संदर्भ डेटा PCM3003E/2K — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | PCM3003E/2K.B | PCM3003E |
|---|---|---|---|
| Package | SSOP-24 (DB) | SSOP-24 (DB) | SSOP-24 (DB) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| ADC Resolution | 20 bit | 20 bit | 20 bit |
| DAC Resolution | 20 bit | 20 bit | 20 bit |
| Input and Output Data | 16 bit or 20 bit | 16 bit or 20 bit | 16 bit or 20 bit |
| THD+N | -86 dB | -86 dB | -86 dB |
| Supply Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Control Method | Hardware control | Hardware control | Hardware control |
| Oversampling Ratio | 64 times | 64 times | 64 times |
| Operating Temperature Range | -25 C to +85 C | -25 C to +85 C | -25 C to +85 C |
मुख्य विशेषताएँ
- Single-package stereo conversion with hardware control (बनामPCM3003E)
- Documented full-scale converter resolution (बनामPCM3003E/2K.B)
- Specified low-distortion performance for mixed-signal audio (बनामPCM3003E/2K.B)
डिज़ाइन नोट्स
Separate the analog input and output paths from the digital interface on the PCB. Route serial clock, serial data, and control signals away from the single-ended analog pins, and avoid placing switching-regulator traces beneath the codec. Use the manufacturer reference layout as the geometric baseline. The 24-pin SSOP footprint provides compact routing, but short analog traces and a stable ground reference remain necessary to preserve the documented -86 dB THD+N performance.
Keep the PCM3003E/2K supply within its documented 2.7 V to 3.6 V range and install the manufacturer-recommended bypass network close to the supply and ground pins. The device's low-power operation does not eliminate supply-noise sensitivity in a mixed-signal audio path. Avoid routing analog return current through digital ground-current paths. If a 5 V source must feed the codec, use an appropriate regulator or translator rather than connecting it directly.
Do not treat PCM3003E, PCM3003E/2K, and PCM3003E/2K.B as automatically equivalent procurement entries merely because they share the PCM3003E family name. Confirm the complete manufacturer orderable suffix, package drawing, reel orientation, tape-and-reel quantity, lifecycle status, and any revision-specific notes. Also verify the supported audio-data format and clock configuration against the current datasheet before replacing a component in production.
Use a continuous ground reference beneath and around the codec where the recommended layout permits it, and terminate serial signals according to the host-device requirements. Avoid adding long breakout wires to clock or data pins, because distributed capacitance can degrade signal integrity at higher supported audio rates. Keep analog input and output routing away from serial bus nodes, and use a stable low-noise reference for analog ground connections.
अनुपालन जानकारी
The manufacturer product and datasheet identify the PCM3003 family and exact orderable MPN, but the available product information does not explicitly state the requested compliance attributes.