Texas Instruments

PCM3003E/2K - 20-Bit Stereo Audio Codec | Texas Instruments

料号: PCM3003E/2K ✓ 量产中
2.7 V to 3.6 V Vdss 24-pin SSOP (DB) Package
最小起订量: 1 |

PCM3003E/2K 概述

The Texas Instruments PCM3003E/2K is a low-power, single-chip stereo audio codec with a 20-bit ADC, 20-bit DAC, single-ended analog inputs and outputs, and hardware control in a 24-pin SSOP package. The device operates from 2.7 V to 3.6 V and supports 16-bit or 20-bit input and output data through its serial interface.

An audio codec is an interface IC that combines analog-to-digital and digital-to-analog conversion with the digital audio interface required to exchange samples with a host processor. The PCM3003 belongs to the broader codec hierarchy of audio interface ICs and power-management-dependent mixed-signal devices, bridging microphone-level or line-level analog signals and a digital audio bus.

The PCM3003E/2K provides a monolithic stereo ADC and DAC, 64-times oversampling, single-ended voltage inputs, and integrated antialiasing filtering. Its specified THD+N reaches -86 dB, making it suitable for consumer audio equipment where signal-chain fidelity must coexist with a compact, low-power implementation. The hardware-control interface simplifies control of operating functions without relying entirely on software commands.

The 20-bit internal converters support 16-bit or 20-bit input and output data, allowing the digital interface to match different source and destination formats. The codec is designed around a 2.7 V to 3.6 V supply range, so system-level audio rails must remain within these limits. Its SSOP-24 package supports conventional surface-mount assembly while preserving compatibility with compact audio boards.

Typical applications include stereo line-input and line-output processing, digital audio recording interfaces, multimedia equipment, and compact consumer audio products. In these systems, the ADC can capture single-ended analog input channels, while the DAC and line-output circuitry can provide analog playback from digital audio data. The integrated filtering and oversampling reduce the amount of external analog filtering required around the converters.

The main design consideration is to treat analog, digital, and ground connections as separate signal paths. Keep serial-clock and data traces away from the analog inputs, provide local bypass capacitance at the supply pins, and use a quiet ground reference for the analog return path. Component values and supported clock configurations should be selected directly from the manufacturer datasheet and its recommended application circuit.

This page consolidates the exact PCM3003E/2K ordering information, electrical specifications, package details, practical applications, and verified drop-in alternatives. It also provides procurement guidance and design notes intended to support faster engineering evaluation while preserving the distinction between documented device ratings and application-specific requirements.

直接替换替代料: PCM3003E/2K ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM3003E/2K (相同外形与封装尺寸) ——差异在于 Analog Input Type, Analog Output Type, Operating Temperature Range, ADC Channel Count, DAC Channel Count.

Texas Instruments
ADC Channel Count: 2 channels
DAC Channel Count: 2 channels
Texas Instruments
Analog Input Type: Single-ended stereo
Analog Output Type: Single-ended stereo
Operating Temperature Range: -25 °C to +85 °C

PCM3003E/2K.B

✅ 直接替换
📦 SSOP-24 (DB)
Related PCM3003E/2K revision designation with the same 24-pin SSOP architecture; stated core parameter difference is 0 V, 0 A, and 0 dB

📋 参考替代料(不在目录中)

PCM3003E

✅ 直接替换
Texas Instruments
📦 SSOP-24 (DB)
Stereo audio codec · 16-bit or 20-bit · Single-ended stereo · Single-ended stereo · 20-bit serial interface · 2.7 V to 3.6 V · -25 °C to +85 °C · Low power

联系询价

查看数据手册 →

PCM3003E/2K 规格参数

ADC Resolution 20 bit
DAC Resolution 20 bit
Input Data Resolution 16 bit or 20 bit
Output Data Resolution 16 bit or 20 bit
ADC Oversampling Ratio 64 times
THD+N -86 dB
Analog Input Type Single-ended voltage input
Analog Output Type Single-ended voltage output
Control Interface Hardware control
Supply Voltage Range 2.7 V to 3.6 V
工作温度范围 -25 C to +85 C
封装 24-pin SSOP (DB)
Package Width 5.30 mm
Package Body Width 0.209 inch
Converter Architecture Monolithic stereo ADC and DAC
Antialiasing Filter Integrated
输出配置 Line-out

PCM3003E/2K 0.209 inch 引脚配置指南

PCM3003E/2K(0.209 inch 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

PCM3003E/2K 的 0.209 inch 封装引脚图

暂无详细引脚数据: PCM3003E/2K.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM3003E/2K 适用于 6 应用s: Stereo Line-In Audio Interface, Compact Digital Audio Playback, Multimedia Recording Product, Consumer Audio Adapter, Digital Speaker Interface, Embedded Audio Control Module.

🎧

Stereo Line-In Audio Interface

PCM3003E/2K fits a stereo line-in interface because it combines two 20-bit ADC paths, single-ended voltage inputs, an integrated antialiasing filter, and 64-times oversampling in one 24-pin SSOP package. The converter supports 16-bit or 20-bit digital data, allowing it to interface with a digital audio host while accepting conventional analog line signals. Its specified THD+N of -86 dB provides the principal distortion target for evaluating the recording path. The analog inputs should remain short and symmetric where possible, while digital clock and data traces should be kept away from the input pins.

🔊

Compact Digital Audio Playback

For compact playback equipment, PCM3003E/2K provides a 20-bit stereo DAC, single-ended analog outputs, line-out capability, and 16-bit or 20-bit output-data support within a single low-power codec. The 2.7 V to 3.6 V operating range suits systems built around a regulated 3.3 V audio rail. Using the integrated converter and filtering reduces the number of separate conversion blocks required. Output-stage and load details should be taken from the manufacturer application information, and the analog return should be routed without digital return currents.

💻

Multimedia Recording Product

PCM3003E/2K is suitable for multimedia products that capture stereo analog input while also supporting digital playback. The monolithic ADC and DAC reduce board area by combining conversion functions in one 24-pin SSOP package, while the antialiasing filter and 64-times oversampling support the internal conversion path. Its hardware-control architecture allows operating states to be established by control circuitry rather than depending exclusively on software initialization. The host interface, audio format, and permitted master-clock configuration should be selected from the manufacturer datasheet.

🔌

Consumer Audio Adapter

A stereo audio adapter can use PCM3003E/2K to translate single-ended analog signals into digital audio data and provide an analog line output from received digital samples. The device's 20-bit ADC and DAC, -86 dB THD+N specification, and support for both 16-bit and 20-bit data provide a clear performance baseline for consumer applications. Its 24-pin SSOP package supports conventional surface-mount assembly. Adequate supply bypassing, controlled analog grounding, and separation from switching circuitry are essential for preserving the converter performance.

🔈

Digital Speaker Interface

PCM3003E/2K can serve as the conversion stage in a digital-speaker system that receives digital audio samples and produces a single-ended analog line-level output. The 20-bit DAC and line-out configuration suit designs that perform amplification and filtering downstream of the codec. Supporting 16-bit or 20-bit output data allows the digital source format to be aligned with the host interface. The output network and amplifier interface should be designed from the datasheet's output specifications, with particular attention to grounding and power-supply isolation.

🧩

Embedded Audio Control Module

PCM3003E/2K fits embedded audio modules that need both conversion directions in a limited package area. Hardware control is useful when codec modes must change predictably with system resets or external sequencing, while the monolithic converter architecture limits the number of external conversion ICs. The device operates across -25 C to +85 C and from 2.7 V to 3.6 V, making its operating envelope explicit for embedded product planning. Use the manufacturer's pin and application diagrams to implement reset, clock, and analog-output connections correctly.

What are the key specifications of PCM3003E/2K that engineers should know?
The PCM3003E/2K is a low-power stereo audio codec with 20-bit ADC and DAC converters, 16-bit or 20-bit input and output data, 64-times oversampling, and a specified THD+N of -86 dB. It accepts single-ended analog voltage inputs and provides single-ended analog outputs with line-out support. According to the Texas Instruments PCM3003 product documentation, the device operates from 2.7 V to 3.6 V and is packaged in a 24-pin SSOP configuration.
What is the operating voltage of PCM3003E/2K?
The PCM3003E/2K operates from 2.7 V to 3.6 V. This range comes from the Texas Instruments PCM3003 documentation and should be treated as the operating boundary for the codec's analog and digital supply circuitry. A system designed around 5 V must include suitable level translation or regulation before connecting the PCM3003E/2K. Confirm decoupling values and power-sequencing requirements in the manufacturer datasheet before layout release.
Where can I download the PCM3003E/2K datasheet PDF?
The official PCM3003E/2K technical documentation is available through the Texas Instruments PCM3003 product page at https://www.ti.com/product/PCM3003. The ordering details page for PCM3003E/2K is https://www.ti.com/product/PCM3003/part-details/PCM3003E/2K. Use the manufacturer document for the complete pin-description table, application circuit, electrical characteristics, control timing, and recommended external components.
Where can I find the PCM3003E/2K pinout?
The PCM3003E/2K pinout is published in the Texas Instruments PCM3003 datasheet, while the manufacturer ordering page confirms a 24-pin SSOP package. The package is represented here as SSOP-24, matching the documented DB package. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and do not infer unshown functions from package position alone. Keep analog, digital, supply, and ground pins routed according to the reference layout.
Is PCM3003E/2K suitable for stereo line input and line output?
Yes, PCM3003E/2K is suitable for stereo single-ended line-input and line-output designs. It combines a 20-bit stereo ADC, a 20-bit stereo DAC, an integrated antialiasing filter, 64-times oversampling, and line-out capability in one 24-pin SSOP package. The manufacturer identifies the device as a low-power stereo codec with hardware control. Its -86 dB THD+N specification is the key fidelity figure to evaluate against the audio system requirements.
What does hardware control mean for the PCM3003E/2K?
Hardware control means the PCM3003E/2K can be managed through dedicated hardware control signals rather than depending exclusively on software commands. This architecture is useful in systems where codec behavior must be established quickly, during reset, or according to a fixed hardware state machine. The Texas Instruments PCM3003 product information identifies PCM3003 as the hardware-controlled member and PCM3002 as the software-controlled counterpart.
PCM3003E/2K vs PCM3003E: which is the better ordering choice?
PCM3003E/2K and PCM3003E identify closely related orderable forms of the Texas Instruments PCM3003 codec, but the suffix determines the ordering configuration. The exact MPN under evaluation is PCM3003E/2K, while PCM3003E appears as a separate manufacturer listing with the same 24-pin SSOP package. Confirm the required reel, tape-and-reel, or other ordering code against the manufacturer part-details page before treating either entry as a procurement substitute.
When should I choose PCM3003E/2K instead of PCM3003E/2K.B?
Choose PCM3003E/2K when the required orderable device is the standard PCM3003E/2K configuration specified in the Texas Instruments catalog. The search documentation also identifies PCM3003E/2K.B as a related revision designation, but it does not establish whether every ordering or lifecycle attribute is identical. Review the current manufacturer ordering table and datasheet revision history before approving PCM3003E/2K.B as a replacement.
What can replace PCM3003E/2K?
The closest identified same-family replacement is PCM3003E/2K.B because it retains the PCM3003E/2K codec designation and 24-pin SSOP architecture. PCM3003E is another closely related ordering entry, but a suffix difference alone does not guarantee that procurement, reel configuration, and ordering conditions are interchangeable. The available manufacturer listings do not identify five confirmed pin-to-pin substitutes, so verify the exact orderable suffix, lifecycle state, and assembly configuration with Texas Instruments.
Is PCM3003E/2K the same as PCM3003E?
PCM3003E/2K and PCM3003E are closely related Texas Instruments orderable entries for the PCM3003 family, but they are not interchangeable solely because their core codec functions are similar. Texas Instruments lists both with a 24-pin SSOP package, while the suffix denotes a distinct ordering configuration. For a drop-in production decision, compare the complete ordering code, package drawing, reel orientation, tape-and-reel quantity, and current manufacturer lifecycle information.
Where can I buy PCM3003E/2K online and what is its price?
Use the Request a Quote form on this page to request PCM3003E/2K pricing, stock confirmation, and lead time from XAIPART. The exact commercial terms can change by quantity and availability, so they should not be inferred from historical catalog information. Submit the target MPN PCM3003E/2K, required quantity, delivery location, and preferred packaging details with the request.
Is PCM3003E/2K in stock and what is the lead time?
Current PCM3003E/2K stock and lead time should be confirmed through the Request a Quote form on this page. The manufacturer part-details page identifies the exact device and its 24-pin SSOP ordering configuration, but live inventory and delivery schedules are transaction-specific. Include your required quantity, reel quantity, approved source list status, and target delivery date to obtain an actionable supply commitment.
What is the price of PCM3003E/2K for a prototype purchase?
Request current PCM3003E/2K pricing through the Request a Quote form on this page rather than relying on a static unit figure. Pricing can vary with order quantity, reel breaks, component availability, and procurement terms. For a prototype, specify whether one unit or a standard production reel is needed so the quotation reflects the appropriate packing configuration and delivery schedule.
How much power-supply decoupling does PCM3003E/2K require?
The PCM3003E/2K must be used within its documented 2.7 V to 3.6 V operating range, and the manufacturer application circuit should determine the exact bypass-capacitor values and placement. Place the specified capacitors close to the relevant supply and ground pins to control supply impedance. Do not substitute a generic bulk capacitor for the recommended local network, because the analog and digital sections require different routing discipline.
What compliance and temperature information applies to PCM3003E/2K?
The PCM3003E/2K is documented for operation from -25 C to +85 C and is a conventional Texas Instruments mixed-signal audio codec in a 24-pin SSOP package. Its RoHS, REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status should be confirmed from the current manufacturer product documentation or declarations. These compliance attributes must not be inferred solely from the codec's application category or package type.

工程参考数据: PCM3003E/2K ——对比、设计指导和合规信息。

选型指南

Choose PCM3003E/2K when the design requires a 20-bit stereo ADC and DAC, single-ended analog signal paths, 16-bit or 20-bit digital audio data, hardware control, and operation from 2.7 V to 3.6 V in a 24-pin SSOP package. PCM3003E/2K.B is the closest identified revision-related option when the manufacturer confirms that its ordering, revision, and assembly conditions satisfy the production design. PCM3003E is appropriate when it is the exact orderable suffix required by the manufacturer catalog or approved BOM. For designs needing software control, confirm whether a software-controlled family member is required rather than assuming PCM3003E/2K provides that control method. No cross-brand drop-in replacement was confirmed in the available manufacturer and cross-reference results. Final sourcing approval should therefore include a pin, clock, format, lifecycle, and reel-configuration review rather than relying on codec functionality alone.

与替代料对比

参数 本产品 PCM3003E/2K.B PCM3003E
Package SSOP-24 (DB) SSOP-24 (DB) SSOP-24 (DB)
Brand Texas Instruments Texas Instruments Texas Instruments
ADC Resolution 20 bit 20 bit 20 bit
DAC Resolution 20 bit 20 bit 20 bit
Input and Output Data 16 bit or 20 bit 16 bit or 20 bit 16 bit or 20 bit
THD+N -86 dB -86 dB -86 dB
Supply Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V
Control Method Hardware control Hardware control Hardware control
Oversampling Ratio 64 times 64 times 64 times
Operating Temperature Range -25 C to +85 C -25 C to +85 C -25 C to +85 C

关键差异点

  • Single-package stereo conversion with hardware control (对比 PCM3003E)
  • Documented full-scale converter resolution (对比 PCM3003E/2K.B)
  • Specified low-distortion performance for mixed-signal audio (对比 PCM3003E/2K.B)

设计说明

Separate the analog input and output paths from the digital interface on the PCB. Route serial clock, serial data, and control signals away from the single-ended analog pins, and avoid placing switching-regulator traces beneath the codec. Use the manufacturer reference layout as the geometric baseline. The 24-pin SSOP footprint provides compact routing, but short analog traces and a stable ground reference remain necessary to preserve the documented -86 dB THD+N performance.

Keep the PCM3003E/2K supply within its documented 2.7 V to 3.6 V range and install the manufacturer-recommended bypass network close to the supply and ground pins. The device's low-power operation does not eliminate supply-noise sensitivity in a mixed-signal audio path. Avoid routing analog return current through digital ground-current paths. If a 5 V source must feed the codec, use an appropriate regulator or translator rather than connecting it directly.

Do not treat PCM3003E, PCM3003E/2K, and PCM3003E/2K.B as automatically equivalent procurement entries merely because they share the PCM3003E family name. Confirm the complete manufacturer orderable suffix, package drawing, reel orientation, tape-and-reel quantity, lifecycle status, and any revision-specific notes. Also verify the supported audio-data format and clock configuration against the current datasheet before replacing a component in production.

Use a continuous ground reference beneath and around the codec where the recommended layout permits it, and terminate serial signals according to the host-device requirements. Avoid adding long breakout wires to clock or data pins, because distributed capacitance can degrade signal integrity at higher supported audio rates. Keep analog input and output routing away from serial bus nodes, and use a stable low-noise reference for analog ground connections.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer product and datasheet identify the PCM3003 family and exact orderable MPN, but the available product information does not explicitly state the requested compliance attributes.

相关搜索

PCM3003E/2K datasheet PCM3003E/2K pinout PCM3003E/2K datasheet pdf PCM3003E/2K equivalent PCM3003E/2K replacement PCM3003E/2K cross reference PCM3003E/2K price PCM3003E/2K stock Texas Instruments PCM3003E/2K PCM3003E/2K 20-bit stereo codec PCM3003E/2K SSOP-24 PCM3003E/2K line output application PCM3003E/2K vs PCM3003E PCM3003E/2K hardware control

相关元器件 & 术语

Texas Instruments PCM3003E/2K PCM3003E/2K.B PCM3003E PCM3003 PCM3002 audio codec stereo audio codec audio interface IC mixed-signal semiconductor ADC DAC THD+N 64-times oversampling single-ended analog input single-ended analog output line-out hardware control software control SSOP-24 DB package surface mount 2.7 V to 3.6 V supply RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情