PEX8603-AB50NI - Gen 2 PCIe Switch, 3 Lanes | Broadcom
MPN: PEX8603-AB50NI ✓ सक्रियPEX8603-AB50NI अवलोकन
An operating specification summary identifies the PEX8603-AB50NI as a three-lane, three-port, PCIe Gen 2 switch. Its three-lane architecture allows a host-facing connection and multiple downstream links to share a PCIe link budget when the system topology permits it. This makes the device useful in systems that require an additional PCIe routing layer without relying on a multi-tier switch hierarchy.
The 136-aQFN package provides 136 electrical contacts in a compact 10 x 10 mm outline. The high pin count supports the power, ground, high-speed differential lanes, configuration, auxiliary, and control functions normally required by a multi-port PCIe switch. Exact lane assignments, auxiliary signaling support, and pin-level power requirements must be taken from the Broadcom pin-description table before PCB routing begins.
PCIe Gen 2 operation supports 5 GT/s signaling per lane, a standard defined for the PCIe generations supported by this switch family. The three-port topology can serve embedded controllers, storage controllers, network interfaces, endpoint devices, and display or capture subsystems that communicate through a common PCIe fabric. The non-blocking architecture allows compatible endpoints to transfer data concurrently rather than sharing a single serialized path.
System designers should allocate reference-clock, auxiliary, and power-delivery resources according to the manufacturer application schematic. Decoupling must follow the recommended values and placement shown in the Broadcom reference design, because switch regulators and high-speed receivers can be sensitive to supply noise and return-path discontinuities. Layer-stackup, trace-length matching, and via geometry also control insertion loss and skew across the differential lanes.
This page consolidates the verified product identity, package information, topology details, sourcing paths, and engineering guidance for the PEX8603-AB50NI. It also identifies drop-in ordering representations supported by the available documentation and distinguishes them from functional but non-pin-compatible PCIe switch options.
के लिए ड्रॉप-इन विकल्प PEX8603-AB50NI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
PEX8603-AB50NI-G
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PEX8603-AB50NIG
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PEX8603-AB50NI Maximum Ratings और Electrical Characteristics
| Product Type | PCI Express Switch IC |
| PCIe Generation | Gen 2 |
| Maximum Link Rate | 5 GT/s per lane |
| Lane Count | 3 lanes |
| Port Count | 3 ports |
| Switch Channel Count | 3 channels |
| Switching Architecture | Non-blocking, fan-out and peer-to-peer capable |
| पैकेज | 136-aQFN (10 x 10 mm) |
| Total Pin Count | 136 pins |
| माउंटिंग प्रकार | Surface Mount |
| Manufacturer | Broadcom Limited |
| Legacy Product Line | PLX / Avago Technologies |
| Maximum PCIe Width | x8 (configuration detail required) |
PEX8603-AB50NI 136-aqfn (10 x 10 mm) पिन कॉन्फ़िगरेशन गाइड
PEX8603-AB50NI (136-aqfn (10 x 10 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PEX8603-AB50NI.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PEX8603-AB50NI के लिए उपयुक्त है 6 अनुप्रयोगs: Embedded PCIe Fan-Out, Embedded Storage and Network Controller Interconnect, Peer-to-Peer Processor and FPGA Communication, Industrial Data Acquisition System, Consumer PCIe Expansion, Control-Plane Interconnect.
Embedded PCIe Fan-Out
The Broadcom PEX8603-AB50NI fits an embedded system that must distribute a PCIe Gen 2 host link among several endpoints. Its three lanes, three ports, and three switch channels create a compact non-blocking fabric for control-plane traffic, allowing storage, network, and accelerator devices to communicate without a multi-tier bridge arrangement. This topology is useful in industrial controllers and embedded platforms where the host processor has too few direct PCIe root ports. The 5 GT/s per lane Gen 2 rate matches the performance class of many embedded peripherals. Designers should map the lane and port configuration in the Broadcom application schematic, then route every differential pair on a controlled-impedance layer with a continuous return path. The 136-aQFN 10 x 10 mm package keeps the device compact, but its thermal pad and numerous supply connections still require a carefully engineered multilayer layout.
अनुशंसित
Embedded Storage and Network Controller Interconnect
The PEX8603-AB50NI can serve as the PCIe routing element between a host and embedded storage or network controllers. Three PCIe lanes and three ports provide enough connectivity for a peer-to-peer fabric or a fan-out arrangement when the attached devices support shared PCIe capability. Its non-blocking architecture lets compatible endpoints exchange data concurrently instead of multiplexing traffic through a single serialized path. The Gen 2 signaling rate of 5 GT/s per lane suits industrial Ethernet, storage, and acquisition subsystems that are latency-sensitive without requiring Gen 3 throughput. Use the manufacturer reference design to assign reference-clock and auxiliary-signal requirements, and preserve the recommended return-path geometry under each high-speed pair. Confirm that each endpoint's lane width, power state, and reset behavior are supported by the selected topology before committing the board layout.
अनुशंसित
Peer-to-Peer Processor and FPGA Communication
A three-port PEX8603-AB50NI supports peer-to-peer communication among a processor, programmable logic, and a dedicated accelerator when the PCIe links can be arranged as a non-blocking switched fabric. The ExpressLane architecture is designed for scalable, high-bandwidth interconnection, making the switch appropriate where two compute agents must exchange data without routing all traffic through a host bridge. With three lanes operating at Gen 2 rates of 5 GT/s per lane, the device provides a defined bandwidth ceiling that must be balanced against simultaneous traffic bursts. The compact 136-aQFN 10 x 10 mm package helps limit board area, although the 136-pin footprint demands careful high-speed routing and a robust power grid. Implement the Broadcom reference stack-up and expose the device's thermal path through the package land pattern to maintain performance under sustained transfer activity.
अनुशंसित
Industrial Data Acquisition System
The Broadcom PEX8603-AB50NI can connect multiple PCIe-based acquisition and processing endpoints in an industrial data-acquisition chassis. Three switch ports allow a compact controller to reach capture, DSP, and storage peripherals through a shared PCIe fabric, while the non-blocking design helps maintain deterministic service among compatible endpoints. The device's Gen 2 operation at 5 GT/s per lane is well matched to many sensor, signal-chain, and control subsystems that move moderate bursts of synchronized data. The switching topology must remain compatible with the endpoint's bandwidth needs; a single high-throughput device can still saturate a shared lane. Use controlled-impedance routing, reference-clock distribution, and the recommended power-decoupling network from the Broadcom design guidance. The 136-aQFN package requires a thermal-aware land pattern and adequate copper for the exposed pad.
अनुशंसित
Consumer PCIe Expansion
The PEX8603-AB50NI is suitable for a consumer or embedded platform that adds PCIe expansion to a system with limited root-port capacity. Its three-lane, three-port configuration allows one upstream connection to feed compatible downstream devices such as storage controllers, network interfaces, or media peripherals. The Broadcom PEX 8605 Product Brief identifies consumer systems as a target application and describes the device as a scalable, non-blocking PCIe switching solution. Because the switch operates at Gen 2 rates, it provides 5 GT/s per lane rather than the throughput of newer PCIe generations. This makes it appropriate for peripherals whose real-world transfer rates remain below that ceiling. Follow the manufacturer reference schematic for clocking, auxiliary connections, and supply sequencing, and route high-speed lanes without stubs or excessive layer transitions.
अनुशंसित
Control-Plane Interconnect
The three-port Broadcom PEX8603-AB50NI is a natural fit for a control-plane fabric where management processors, configuration devices, and monitoring blocks need a dedicated PCIe routing layer. The Broadcom product documentation explicitly describes the ExpressLane PEX8603 as suitable for control-plane applications and highlights its non-blocking, fan-out, and peer-to-peer capabilities. Three lanes and three ports allow a compact topology to be built without introducing a larger switch. Engineering teams should separate latency-sensitive control traffic from bulk data paths and verify the bandwidth allocation of each port. Reference-clock routing, auxiliary signaling, and power-state transitions must follow the manufacturer reference design. The 136-aQFN package keeps routing dense, so careful return-path continuity, decoupling placement, and thermal-pad connection are essential for reliable control-plane operation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा PEX8603-AB50NI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | PEX8603-AB50NI-G | PEX8603-AB50NIG |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom / legacy PLX record |
| Package | 136-aQFN (10 x 10 mm) | 136-aQFN (10 x 10 mm) - same | 136-aQFN (10 x 10 mm) - same |
| PCIe Generation | Gen 2 | Gen 2 - same | Gen 2 - same |
| Maximum Link Rate | 5 GT/s per lane | 5 GT/s per lane - same | 5 GT/s per lane - same |
| Lane Count | 3 lanes | 3 lanes - same | 3 lanes - same |
| Port Count | 3 ports | 3 ports - same | 3 ports - same |
| Switch Channel Count | 3 channels | 3 channels - same | 3 channels - same |
| Switching Architecture | Non-blocking, fan-out and peer-to-peer capable | Non-blocking ExpressLane architecture - same | Non-blocking ExpressLane architecture - same |
| Ordering Representation | PEX8603-AB50NI | -G suffix ordering code | Legacy PLX record without hyphen before G |
मुख्य विशेषताएँ
- Compact three-lane, three-port Gen 2 PCIe fabric (बनामPEX8603-AB50NI-G)
- Direct compatibility with the existing PEX8603 board footprint (बनामPEX8603-AB50NIG)
- Non-blocking fan-out and peer-to-peer capability (बनामPEX8603-AB50NI-G)
डिज़ाइन नोट्स
Use the Broadcom PEX 8605 Product Brief as the primary routing reference for the 136-aQFN device. Keep every high-speed differential pair on a continuous reference plane, match intra-pair length to the manufacturer tolerance, and minimize vias or stubs through the 10 x 10 mm footprint. Preserve layer-transition symmetry between paired signals and place the device in the location shown by the reference layout to control return-path discontinuities.
Follow the manufacturer power network and decoupling arrangement instead of substituting generic bulk-capacitor values. Place the smallest recommended bypass capacitors directly at the relevant supply pins and connect the exposed thermal pad through the specified land pattern. Validate the completed rail under maximum port activity because simultaneous Gen 2 transfers can increase supply-current transients and amplify noise at the switch receivers.
Do not treat another ExpressLane model with a different lane count as a drop-in substitute. Even if a competitor device offers a similar PCIe Gen 2 feature set, changes in pin assignment, package, clock architecture, and auxiliary signaling require a PCB redesign. Verify the complete Broadcom ordering code, top marking, revision, configuration method, and firmware requirements before replacing the PEX8603-AB50NI with PEX8603-AB50NI-G or PEX8603-AB50NIG.
Estimate junction temperature from the actual supply voltage, port activity, and board thermal resistance rather than using a nominal power value. The estimate should include copper spreading from the exposed pad, adjacent heat sources, and the final enclosure. If the calculated rise approaches the device limit, improve pad coupling, reduce nearby heat sources, or increase board area instead of relying on airflow alone.
अनुपालन जानकारी
The Broadcom product documentation and distributor listings identify the device and package but do not provide extractable compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Broadcom for the exact ordering code and current production revision.