Broadcom

PEX8603-AB50NI - Gen 2 PCIe Switch, 3 Lanes | Broadcom

MPN: PEX8603-AB50NI ✓ Aktif
136-aQFN (10 x 10 mm) Package
MOQ: 1 |

PEX8603-AB50NI Ringkasan

The Broadcom PEX8603-AB50NI is a PCI Express Gen 2 switch IC with three lanes, three ports, and three switch channels, housed in a 136-aQFN package measuring 10 x 10 mm. It is designed to add scalable, high-bandwidth, non-blocking interconnection to control-plane, consumer, and embedded systems. The Broadcom PEX 8605 Product Brief describes the ExpressLane PEX8603 as a device suited to fan-out and peer-to-peer connectivity.

An operating specification summary identifies the PEX8603-AB50NI as a three-lane, three-port, PCIe Gen 2 switch. Its three-lane architecture allows a host-facing connection and multiple downstream links to share a PCIe link budget when the system topology permits it. This makes the device useful in systems that require an additional PCIe routing layer without relying on a multi-tier switch hierarchy.

The 136-aQFN package provides 136 electrical contacts in a compact 10 x 10 mm outline. The high pin count supports the power, ground, high-speed differential lanes, configuration, auxiliary, and control functions normally required by a multi-port PCIe switch. Exact lane assignments, auxiliary signaling support, and pin-level power requirements must be taken from the Broadcom pin-description table before PCB routing begins.

PCIe Gen 2 operation supports 5 GT/s signaling per lane, a standard defined for the PCIe generations supported by this switch family. The three-port topology can serve embedded controllers, storage controllers, network interfaces, endpoint devices, and display or capture subsystems that communicate through a common PCIe fabric. The non-blocking architecture allows compatible endpoints to transfer data concurrently rather than sharing a single serialized path.

System designers should allocate reference-clock, auxiliary, and power-delivery resources according to the manufacturer application schematic. Decoupling must follow the recommended values and placement shown in the Broadcom reference design, because switch regulators and high-speed receivers can be sensitive to supply noise and return-path discontinuities. Layer-stackup, trace-length matching, and via geometry also control insertion loss and skew across the differential lanes.

This page consolidates the verified product identity, package information, topology details, sourcing paths, and engineering guidance for the PEX8603-AB50NI. It also identifies drop-in ordering representations supported by the available documentation and distinguishes them from functional but non-pin-compatible PCIe switch options.

Alternatif penggantian untuk PEX8603-AB50NI — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

PEX8603-AB50NI-G

✅ Drop-In
📦 136-aQFN (10 x 10 mm)
Distributor ordering code adds the '-G' suffix while retaining three lanes, three ports, Gen 2 operation, and the 136-aQFN outline; no electrical difference is stated

📋 Alternatif referensi (tidak dalam katalog)

PEX8603-AB50NIG

✅ Drop-In
📦 136-aQFN (10 x 10 mm)
Legacy PLX ordering representation with no space before 'G'; three lanes, three ports, and the 136-aQFN package remain identical

📋 Alternatif referensi (tidak dalam katalog)

PEX8603-AB50NI Rating Maksimal & Karakteristik Listrik

Product Type PCI Express Switch IC
PCIe Generation Gen 2
Maximum Link Rate 5 GT/s per lane
Lane Count 3 lanes
Port Count 3 ports
Switch Channel Count 3 channels
Switching Architecture Non-blocking, fan-out and peer-to-peer capable
Paket 136-aQFN (10 x 10 mm)
Total Pin Count 136 pins
Tipe Mounting Surface Mount
Manufacturer Broadcom Limited
Legacy Product Line PLX / Avago Technologies
Maximum PCIe Width x8 (configuration detail required)

PEX8603-AB50NI 136-aqfn (10 x 10 mm) Diamant Konfigurasi Panduan

Konfigurasi pin untuk PEX8603-AB50NI (136-aqfn (10 x 10 mm) pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 136-aqfn (10 x 10 mm) untuk PEX8603-AB50NI

Tidak ada data diatribut pin yang tersedia untuk PEX8603-AB50NI.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

PEX8603-AB50NI cocok untuk 6 aplikasis: Embedded PCIe Fan-Out, Embedded Storage and Network Controller Interconnect, Peer-to-Peer Processor and FPGA Communication, Industrial Data Acquisition System, Consumer PCIe Expansion, Control-Plane Interconnect.

🏭

Embedded PCIe Fan-Out

The Broadcom PEX8603-AB50NI fits an embedded system that must distribute a PCIe Gen 2 host link among several endpoints. Its three lanes, three ports, and three switch channels create a compact non-blocking fabric for control-plane traffic, allowing storage, network, and accelerator devices to communicate without a multi-tier bridge arrangement. This topology is useful in industrial controllers and embedded platforms where the host processor has too few direct PCIe root ports. The 5 GT/s per lane Gen 2 rate matches the performance class of many embedded peripherals. Designers should map the lane and port configuration in the Broadcom application schematic, then route every differential pair on a controlled-impedance layer with a continuous return path. The 136-aQFN 10 x 10 mm package keeps the device compact, but its thermal pad and numerous supply connections still require a carefully engineered multilayer layout.

🖥️

Embedded Storage and Network Controller Interconnect

The PEX8603-AB50NI can serve as the PCIe routing element between a host and embedded storage or network controllers. Three PCIe lanes and three ports provide enough connectivity for a peer-to-peer fabric or a fan-out arrangement when the attached devices support shared PCIe capability. Its non-blocking architecture lets compatible endpoints exchange data concurrently instead of multiplexing traffic through a single serialized path. The Gen 2 signaling rate of 5 GT/s per lane suits industrial Ethernet, storage, and acquisition subsystems that are latency-sensitive without requiring Gen 3 throughput. Use the manufacturer reference design to assign reference-clock and auxiliary-signal requirements, and preserve the recommended return-path geometry under each high-speed pair. Confirm that each endpoint's lane width, power state, and reset behavior are supported by the selected topology before committing the board layout.

🔧

Peer-to-Peer Processor and FPGA Communication

A three-port PEX8603-AB50NI supports peer-to-peer communication among a processor, programmable logic, and a dedicated accelerator when the PCIe links can be arranged as a non-blocking switched fabric. The ExpressLane architecture is designed for scalable, high-bandwidth interconnection, making the switch appropriate where two compute agents must exchange data without routing all traffic through a host bridge. With three lanes operating at Gen 2 rates of 5 GT/s per lane, the device provides a defined bandwidth ceiling that must be balanced against simultaneous traffic bursts. The compact 136-aQFN 10 x 10 mm package helps limit board area, although the 136-pin footprint demands careful high-speed routing and a robust power grid. Implement the Broadcom reference stack-up and expose the device's thermal path through the package land pattern to maintain performance under sustained transfer activity.

📡

Industrial Data Acquisition System

The Broadcom PEX8603-AB50NI can connect multiple PCIe-based acquisition and processing endpoints in an industrial data-acquisition chassis. Three switch ports allow a compact controller to reach capture, DSP, and storage peripherals through a shared PCIe fabric, while the non-blocking design helps maintain deterministic service among compatible endpoints. The device's Gen 2 operation at 5 GT/s per lane is well matched to many sensor, signal-chain, and control subsystems that move moderate bursts of synchronized data. The switching topology must remain compatible with the endpoint's bandwidth needs; a single high-throughput device can still saturate a shared lane. Use controlled-impedance routing, reference-clock distribution, and the recommended power-decoupling network from the Broadcom design guidance. The 136-aQFN package requires a thermal-aware land pattern and adequate copper for the exposed pad.

📱

Consumer PCIe Expansion

The PEX8603-AB50NI is suitable for a consumer or embedded platform that adds PCIe expansion to a system with limited root-port capacity. Its three-lane, three-port configuration allows one upstream connection to feed compatible downstream devices such as storage controllers, network interfaces, or media peripherals. The Broadcom PEX 8605 Product Brief identifies consumer systems as a target application and describes the device as a scalable, non-blocking PCIe switching solution. Because the switch operates at Gen 2 rates, it provides 5 GT/s per lane rather than the throughput of newer PCIe generations. This makes it appropriate for peripherals whose real-world transfer rates remain below that ceiling. Follow the manufacturer reference schematic for clocking, auxiliary connections, and supply sequencing, and route high-speed lanes without stubs or excessive layer transitions.

🌐

Control-Plane Interconnect

The three-port Broadcom PEX8603-AB50NI is a natural fit for a control-plane fabric where management processors, configuration devices, and monitoring blocks need a dedicated PCIe routing layer. The Broadcom product documentation explicitly describes the ExpressLane PEX8603 as suitable for control-plane applications and highlights its non-blocking, fan-out, and peer-to-peer capabilities. Three lanes and three ports allow a compact topology to be built without introducing a larger switch. Engineering teams should separate latency-sensitive control traffic from bulk data paths and verify the bandwidth allocation of each port. Reference-clock routing, auxiliary signaling, and power-state transitions must follow the manufacturer reference design. The 136-aQFN package keeps routing dense, so careful return-path continuity, decoupling placement, and thermal-pad connection are essential for reliable control-plane operation.

Ringkasan Produk Direkomendasikan

PEX8603-AB50NI-G Equivalent Broadcom ordering representation Digunakan di dalam: Embedded PCIe Fan-Out, Peer-to-Peer Processor and FPGA Communication, Industrial Data Acquisition System, Control-Plane Interconnect PEX8603-AB50NIG Legacy ordering representation of the same switch Digunakan di dalam: Embedded Storage and Network Controller Interconnect, Consumer PCIe Expansion
What is the Broadcom PEX8603-AB50NI?
The Broadcom PEX8603-AB50NI is a PCI Express Gen 2 switch IC with three lanes, three ports, and three switch channels in a 136-aQFN package. According to the Broadcom PEX 8605 Product Brief, the ExpressLane PEX8603 adds scalable, high-bandwidth, non-blocking interconnection for control-plane, consumer, and embedded applications. The device is particularly suited to fan-out and peer-to-peer PCIe topologies.
How many PCIe lanes and ports does the PEX8603-AB50NI have?
The PEX8603-AB50NI has three PCIe lanes, three ports, and three switch channels. Mouser identifies the component as a three-lane, three-port Gen 2 PCIe switch, while DigiKey describes it as a three-channel PCI Express switch IC. These figures establish the device as a compact multi-port switch rather than a single-lane endpoint or bridge.
What package does the PEX8603-AB50NI use?
The PEX8603-AB50NI is supplied in a 136-aQFN package with a 10 x 10 mm body outline. The package designation is confirmed by the DigiKey product listing, and the Octopart datasheet listing identifies the same 136-aQFN configuration. Its 136 contacts support the high-speed lanes, supply rails, ground returns, configuration pins, and auxiliary functions defined for the device.
What PCIe generation and data rate does the PEX8603-AB50NI support?
The PEX8603-AB50NI supports PCI Express Gen 2 signaling, with a maximum transfer rate of 5 GT/s per lane. Gen 2 provides a practical balance between bandwidth and implementation complexity for embedded controllers, storage, networking, and industrial systems. The Broadcom PEX 8605 Product Brief identifies the PEX8603 as a PCIe switching solution for scalable, non-blocking interconnection.
Where can I download the PEX8603-AB50NI datasheet PDF?
The PEX8603-AB50NI datasheet PDF can be reached through the Broadcom product documentation at docs.broadcom.com/doc/12351819 or through the document copy at abc-semi.com/datasheets/PEX8603-AB50NIG.pdf. Octopart also provides a datasheet entry for the device. Use the Broadcom document as the primary source for pin descriptions, electrical limits, reference schematics, and layout guidance.
Where can I find the PEX8603-AB50NI pinout?
The PEX8603-AB50NI pinout is documented in the pin-description table of the Broadcom PEX 8605 Product Brief at docs.broadcom.com/doc/12351819. The device uses a 136-aQFN outline, so the pin list must be transcribed from the manufacturer table rather than inferred from a generic package drawing. Confirm exposed-pad and thermal-ground connections directly against the manufacturer land pattern.
Is PEX8603-AB50NI-G the same device as the PEX8603-AB50NI?
PEX8603-AB50NI-G is the distributor ordering representation of the same Broadcom PEX8603 switch identified in the product listings. It is listed as a Gen 2 PCIe switch with three lanes and three ports in the 136-aQFN package. When ordering, match the complete ordering code, package suffix, and any programmed configuration required by the system rather than relying only on the base device name.
What is the best drop-in replacement for the PEX8603-AB50NI?
The closest documented drop-in representation is PEX8603-AB50NI-G, which carries the same three-lane, three-port Gen 2 identity and 136-aQFN outline in distributor records. The PLX-branded PEX8603-AB50NI records describe the same underlying device family. Firmware, configuration, and ordering-code differences must still be reviewed before treating any ordering representation as a substitute.
Can a PLX PEX8603-AB50NI replace the Broadcom PEX8603-AB50NI?
PLX PEX8603-AB50NI records identify the legacy PLX identity of the same ExpressLane PEX8603 switch family, including the three-lane, three-port Gen 2 configuration and 136-aQFN package. Because PLX was acquired by Broadcom, legacy PLX markings can correspond to the same commercial device line. Confirm the top-mark code, revision, firmware, and configuration with Broadcom before substitution.
When should I choose the PEX8603-AB50NI instead of another PCIe switch?
Choose the PEX8603-AB50NI when the board needs a compact, non-blocking PCIe Gen 2 fan-out or peer-to-peer fabric with exactly three lanes and three ports. It is a better fit than a single-port bridge when several compatible endpoints must share bandwidth, and better than a wider switch when the design only requires three lanes. Choose a wider or newer-generation switch when link count, throughput, or topology exceeds this device's limits.
Is the PEX8603-AB50NI suitable for embedded systems?
Yes, the PEX8603-AB50NI is suitable for embedded systems that require additional PCIe routing capacity. The Broadcom PEX 8605 Product Brief specifically identifies control-plane, consumer, and embedded applications and highlights fan-out and peer-to-peer interconnection. The device fits designs needing three Gen 2 lanes and three ports, subject to the power, thermal, and reference-design requirements of the application.
What PCIe devices can connect to the PEX8603-AB50NI?
Compatible PCIe endpoints can include storage controllers, Ethernet or industrial network controllers, programmable logic devices, capture subsystems, and embedded processor peripherals. The Broadcom PEX 8605 Product Brief describes the PEX8603 as a scalable, high-bandwidth, non-blocking switch for control-plane, consumer, and embedded systems. Endpoint configuration must satisfy the lane, routing, auxiliary-signal, and clocking requirements defined by Broadcom.
How do I design the PCB for the PEX8603-AB50NI?
Use the Broadcom reference schematic and recommended layer stack-up, then route each high-speed differential lane as a controlled-impedance pair with matched length and minimized via transitions. Place power-decoupling capacitors at the pins specified in the manufacturer design guidance and provide a continuous, low-impedance return path beneath the signals. Confirm exposed-pad and ground connectivity against the 136-aQFN land pattern before fabrication.
How much power does the PEX8603-AB50NI dissipate?
Power dissipation for the PEX8603-AB50NI depends on the configured lane rate, traffic activity, supply voltage, ambient temperature, and board thermal performance, so it must be calculated for the final design. Use the current and voltage limits in the Broadcom PEX 8605 Product Brief together with the measured or simulated switching activity. Apply the manufacturer thermal layout guidance and verify the exposed-pad heat-removal path.
Where can I buy the PEX8603-AB50NI and what is its lead time?
Use the Request a Quote form on this page to request Broadcom PEX8603-AB50NI pricing, stock confirmation, minimum order quantity, and current lead time. The device is listed for PEX8603-AB50NI-G and the legacy PLX ordering representation across major distribution records, but inventory and lead time can change with market demand. Provide your target quantity and date requirements in the quote request.
What are the key specifications of the PEX8603-AB50NI?
The key PEX8603-AB50NI specifications are Gen 2 PCIe operation at 5 GT/s per lane, three lanes, three ports, three switch channels, non-blocking fabric support, and a 136-aQFN 10 x 10 mm surface-mount package. The Broadcom PEX 8605 Product Brief identifies fan-out and peer-to-peer applications. Supply limits, auxiliary features, and thermal ratings should be confirmed in the manufacturer document.
Is there a Broadcom alternative with more PCIe lanes than the PEX8603-AB50NI?
Broadcom offers other ExpressLane PCIe switch products with different lane and port counts, but a different lane count normally changes the package, pinout, and board layout. The documented PEX8603-AB50NI alternatives are ordering representations of the same three-lane, three-port device rather than pin-compatible higher-capacity switches. A wider switch should therefore be treated as a redesign, not a drop-in replacement.

Data referensi engineering untuk PEX8603-AB50NI — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the Broadcom PEX8603-AB50NI when the PCB requires a three-lane, three-port PCIe Gen 2 switch and the layout already matches the 136-aQFN 10 x 10 mm footprint. It is appropriate for fan-out, peer-to-peer, control-plane, consumer, and embedded systems that need non-blocking interconnection at 5 GT/s per lane. PEX8603-AB50NI-G is the documented hyphenated ordering representation and is the practical choice when procurement requires that exact code. PEX8603-AB50NIG appears in legacy PLX records and may be relevant when recovering an older design, but the top marking and configuration must be confirmed. Do not select another PCIe switch merely by lane count; different packages, pin assignments, clocking, auxiliary signals, and firmware generally require a new layout. A wider or newer-generation switch is preferable when the design exceeds three lanes, needs more than three ports, or requires throughput above the Gen 2 limit.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini PEX8603-AB50NI-G PEX8603-AB50NIG
Brand Broadcom Broadcom Broadcom / legacy PLX record
Package 136-aQFN (10 x 10 mm) 136-aQFN (10 x 10 mm) - same 136-aQFN (10 x 10 mm) - same
PCIe Generation Gen 2 Gen 2 - same Gen 2 - same
Maximum Link Rate 5 GT/s per lane 5 GT/s per lane - same 5 GT/s per lane - same
Lane Count 3 lanes 3 lanes - same 3 lanes - same
Port Count 3 ports 3 ports - same 3 ports - same
Switch Channel Count 3 channels 3 channels - same 3 channels - same
Switching Architecture Non-blocking, fan-out and peer-to-peer capable Non-blocking ExpressLane architecture - same Non-blocking ExpressLane architecture - same
Ordering Representation PEX8603-AB50NI -G suffix ordering code Legacy PLX record without hyphen before G

Diferensiator Kunci

  • Compact three-lane, three-port Gen 2 PCIe fabric (vsPEX8603-AB50NI-G)
  • Direct compatibility with the existing PEX8603 board footprint (vsPEX8603-AB50NIG)
  • Non-blocking fan-out and peer-to-peer capability (vsPEX8603-AB50NI-G)

Catatan Desain

Use the Broadcom PEX 8605 Product Brief as the primary routing reference for the 136-aQFN device. Keep every high-speed differential pair on a continuous reference plane, match intra-pair length to the manufacturer tolerance, and minimize vias or stubs through the 10 x 10 mm footprint. Preserve layer-transition symmetry between paired signals and place the device in the location shown by the reference layout to control return-path discontinuities.

Follow the manufacturer power network and decoupling arrangement instead of substituting generic bulk-capacitor values. Place the smallest recommended bypass capacitors directly at the relevant supply pins and connect the exposed thermal pad through the specified land pattern. Validate the completed rail under maximum port activity because simultaneous Gen 2 transfers can increase supply-current transients and amplify noise at the switch receivers.

Do not treat another ExpressLane model with a different lane count as a drop-in substitute. Even if a competitor device offers a similar PCIe Gen 2 feature set, changes in pin assignment, package, clock architecture, and auxiliary signaling require a PCB redesign. Verify the complete Broadcom ordering code, top marking, revision, configuration method, and firmware requirements before replacing the PEX8603-AB50NI with PEX8603-AB50NI-G or PEX8603-AB50NIG.

Estimate junction temperature from the actual supply voltage, port activity, and board thermal resistance rather than using a nominal power value. The estimate should include copper spreading from the exposed pad, adjacent heat sources, and the final enclosure. If the calculated rise approaches the device limit, improve pad coupling, reduce nearby heat sources, or increase board area instead of relying on airflow alone.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The Broadcom product documentation and distributor listings identify the device and package but do not provide extractable compliance declarations. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with Broadcom for the exact ordering code and current production revision.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

PEX8603-AB50NI datasheet PEX8603-AB50NI specifications PEX8603-AB50NI pinout PEX8603-AB50NI datasheet pdf PEX8603-AB50NI equivalent PEX8603-AB50NI replacement PEX8603-AB50NI vs PEX8603-AB50NI-G PEX8603 136 aQFN pinout PEX8603 3 lane 3 port PCIe switch PEX8603 PCIe Gen 2 switch Broadcom PEX8603-AB50NI PEX8603-AB50NI price PEX8603-AB50NI stock PEX8603 embedded PCIe fan-out

Komponen dan Istilah Terkait

Broadcom PLX Avago Technologies PEX8603-AB50NI PEX8603-AB50NI-G PEX8603-AB50NIG ExpressLane PCI Express Switch PCI Express Gen 2 5 GT/s 3 PCIe lanes 3 PCIe ports 3 switch channels non-blocking switch fan-out topology peer-to-peer topology 136-aQFN 10 x 10 mm package surface-mount package embedded systems control-plane applications consumer applications PCIe high-speed routing differential pair reference clock auxiliary signaling thermal pad controlled impedance
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ