Microchip Technology

PIC24F16KM202-E/SS - 32MHz 16-bit XLP MCU | Microchip

MPN: PIC24F16KM202-E/SS ✓ सक्रिय
2.5 V / 3.3 V Vdss 28-pin SSOP Package 32 MHz Speed 16 KB Flash Memory
न्यूनतम ऑर्डर मात्रा: 1 |

PIC24F16KM202-E/SS अवलोकन

The Microchip Technology PIC24F16KM202-E/SS is a 16-bit PIC XLP low-power microcontroller with a 32 MHz operating frequency, 16 KB of Flash program memory, 2 KB of RAM, and a 28-pin SSOP package. Its integrated analog resources include a 12-bit ADC, an 8-bit DAC, and operational amplifiers, while its communication peripherals support I2C, IrDA, LINbus, SPI, and UART/USART.

A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The PIC24F16KM202 belongs to the PIC24 16-bit MCU family and the broader embedded-controller hierarchy. Its XLP design emphasizes low power consumption for battery-operated and energy-conscious equipment, while the integrated analog peripherals reduce the need for external converters and signal-conditioning components.

The principal features of this device are its 32 MHz maximum operating frequency, 16 KB Flash memory, and 2 KB SRAM. Analog integration includes a 12-bit ADC, 8-bit DAC, and operational amplifiers. Flexible capture, compare, and PWM modules support timing and motor-control functions, while the configurable logic cell assists with simple hardware logic. An internal oscillator eliminates the need for an external clock in many designs.

The PIC24F16KM202 combines a PIC core, 16 KB Flash, and 2 KB RAM in a low-pin-count 28-SSOP package. The -E suffix identifies the extended-temperature option, and /SS denotes the SSOP package configuration. The device is designed for compact embedded systems where analog measurement, serial communication, control logic, and low-power operation are required without a large external component count.

Typical uses include low-power sensor nodes, industrial control modules, compact data loggers, consumer accessories, battery-powered instruments, and embedded communication equipment. Its multiple serial interfaces allow connection to sensors, displays, transceivers, and other digital peripherals, while the ADC and operational amplifiers can simplify analog front-end implementation.

For PCB design, place decoupling capacitors close to the power pins and route sensitive analog inputs away from switching nodes and high-current outputs. Confirm the required operating voltage, peripheral pin multiplexing, and analog configuration in the manufacturer datasheet. For software, select the correct PIC24 device family and pin assignment in the development toolchain before committing the PCB layout.

This page combines the PIC24F16KM202 technical profile, application guidance, package information, verified same-footprint alternatives, and design checks that help engineers move from component selection to implementation. It also identifies where a direct substitute must be reviewed for package, temperature range, and firmware compatibility before use.

के लिए ड्रॉप-इन विकल्प PIC24F16KM202-E/SS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC24F16KM202-E/SS (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Operating Temperature, Package.

Microchip Technology
Operating Temperature: -40C to +85C (industrial, I grade)
Package: 28-SSOP (5.30 mm width)

PIC24F16KM202-I/SS

✅ ड्रॉप-इन
Microchip Technology
📦 28-SSOP
PIC24F (16-bit RISC, modified Harvard) · 16 KB (5.5K x 24) · 2 KB · 512 bytes · 32 MHz (8 MIPS) · 1.8 V to 3.6 V · 23 · 12-bit, up to 9 input channels

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PIC24F16KM202-E/SS Maximum Ratings और Electrical Characteristics

Microcontroller Family PIC24 16-bit MCU
Maximum CPU Frequency 32 MHz
Program Memory 16 KB Flash
Program Memory Organization 5.5K x 24
Data Memory 2 KB RAM
ADC Resolution 12 bit
DAC Resolution 8 bit
Integrated Analog Resources 12-bit ADC, 8-bit DAC, and operational amplifiers
Oscillator Internal
Serial Interfaces I2C, IrDA, LINbus, SPI, and UART/USART
Timer and Control Peripherals Capture, Compare, PWM modules, and configurable logic cell
Operating Voltage 2.5 V / 3.3 V
ऑपरेटिंग तापमान -40 °C to +85 °C
पैकेज 28-pin SSOP
Package Width 5.30 mm (0.209 inch)
माउंटिंग प्रकार Surface Mount
Low-Power Feature PIC XLP eXtreme Low Power
RoHS स्थिति Compliant

PIC24F16KM202-E/SS 5.30 mm (0.209 inch) पिन कॉन्फ़िगरेशन गाइड

PIC24F16KM202-E/SS (5.30 mm (0.209 inch) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

PIC24F16KM202-E/SS के लिए 5.30 mm (0.209 inch) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC24F16KM202-E/SS.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PIC24F16KM202-E/SS के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Power Sensor Nodes, Industrial Control and Monitoring, Battery-Powered Data Loggers, Compact Communication Equipment, Consumer Accessories and Embedded Controls, Precision Analog Control Systems.

🧩

Low-Power Sensor Nodes

PIC24F16KM202-E/SS fits compact sensor nodes because its 32 MHz PIC core provides responsive local processing while the XLP architecture supports power-conscious operation. The integrated 12-bit ADC and operational amplifiers can acquire and condition analog sensor signals without requiring separate converter and amplifier packages, while 2 KB RAM supports short measurement and control buffers. I2C and SPI provide practical links to environmental, motion, and pressure sensors. For battery-powered deployments, configure sleep modes and wake sources through the manufacturer firmware workflow, and verify the analog settling behavior against the selected sensor output impedance.

🏭

Industrial Control and Monitoring

PIC24F16KM202-E/SS is appropriate for compact industrial monitoring and control modules where processing speed, analog measurement, and serial communications must coexist in one device. The 12-bit ADC supports sensor acquisition, the operational amplifiers assist with conditioning, and the configurable logic cell can implement simple hardware decisions near the input. Capture, compare, and PWM peripherals support timing, motor-control, or actuator functions. The 28-SSOP footprint reduces board area, although engineers should preserve copper for thermal dissipation and use the manufacturer layout guidance for sensitive analog routing.

📟

Battery-Powered Data Loggers

PIC24F16KM202-E/SS supports compact data loggers that periodically measure analog inputs and store results locally. Its internal oscillator eliminates the external crystal normally required for accurate timing, and the 16 KB Flash provides space for firmware and nonvolatile data while 2 KB RAM handles active logging buffers. I2C is useful for adding external memory or digital sensors, and UART/USART supports connection to a host module. Low-power design should focus on duty-cycled acquisition, peripheral shutdown between samples, and validated retention requirements; the manufacturer datasheet should guide sleep-mode and timing configuration.

🌐

Compact Communication Equipment

PIC24F16KM202-E/SS suits compact communication equipment that needs several serial protocols without occupying a large board area. UART/USART supports general serial links, SPI accommodates higher-speed peripherals, and I2C is useful for sensors and configuration devices; LINbus and IrDA extend the design options for local networking or optical-style links. At 32 MHz, the MCU can service protocol tasks while coordinating local analog and control functions. Firmware must reserve the required peripheral pins and consider interrupt latency, bus timing, and buffer capacity. The 28-SSOP package also keeps connector-heavy products physically compact.

📱

Consumer Accessories and Embedded Controls

PIC24F16KM202-E/SS can manage compact consumer accessories that combine capacitive or resistive sensing, simple actuator control, and status communication. The mixed-signal resources allow an analog input and operational-amplifier stage to share the MCU with digital control logic, reducing the number of external components in a 28-SSOP design. The internal oscillator supports economical clocking when the application does not require a crystal reference. Designers should confirm start-up behavior, output drive capability, analog settling, and peripheral pin reuse in the manufacturer datasheet, particularly when the accessory contains motors, relays, or long external wiring.

⚡

Precision Analog Control Systems

PIC24F16KM202-E/SS is useful in compact analog control systems where an MCU must measure, compare, and regulate a physical variable. The 12-bit ADC supplies the measurement interface, the 8-bit DAC provides a basic analog output, and the integrated operational amplifiers can support signal conditioning around the control loop. Capture, compare, and PWM peripherals assist with deterministic actuator timing, while the configurable logic cell can handle simple peripheral functions. The -E temperature range covers -40 °C to +85 °C; systems operating hotter should use the -I/SS version. Validate loop stability and analog accuracy with the manufacturer application guidance.

Where can I download the PIC24F16KM202 datasheet PDF?
The PIC24F16KM202 datasheet is available through the Microchip Technology product page for PIC24F16KM202. The manufacturer product page provides the primary technical documentation and device resources for the PIC24F16KM202 family. Use the family datasheet when confirming the 32 MHz maximum CPU frequency, 16 KB Flash memory, 2 KB RAM, analog peripherals, electrical limits, and the 28-SSOP pin arrangement. The E/SS ordering suffix identifies the temperature and package configuration used in this listing.
What are the key specifications of PIC24F16KM202-E/SS that engineers should know?
The PIC24F16KM202-E/SS combines a 16-bit PIC core, 32 MHz maximum operating frequency, 16 KB Flash program memory, and 2 KB RAM in a 28-pin SSOP package. According to the Microchip Technology PIC24F16KM202 manufacturer datasheet, it also integrates a 12-bit ADC, 8-bit DAC, operational amplifiers, capture/compare/PWM modules, a configurable logic cell, and I2C, IrDA, LINbus, SPI, and UART/USART interfaces. These resources make it useful for compact low-power embedded control and measurement systems.
What is the operating voltage of PIC24F16KM202-E/SS?
PIC24F16KM202-E/SS operates from a 2.5 V or 3.3 V supply. According to the Microchip Technology PIC24F16KM202 manufacturer datasheet, the device includes an internal oscillator, so many designs do not require an external crystal or ceramic resonator. Verify the voltage tolerance of every connected peripheral and use the datasheet's decoupling and layout recommendations when powering the MCU in a 3.3 V system.
Is PIC24F16KM202-E/SS suitable for low-power sensor applications?
Yes, PIC24F16KM202-E/SS is suitable for low-power sensor applications because it belongs to the PIC XLP eXtreme Low Power family and combines a 32-bit-capable 16-bit PIC core with integrated analog resources. The 12-bit ADC, operational amplifiers, internal oscillator, and 2 KB RAM can support sensing, signal conditioning, and local control without requiring several external devices. Sleep-mode behavior and wake-up performance should be evaluated against the sensor duty cycle using the manufacturer datasheet.
What can replace PIC24F16KM202-E/SS?
PIC24F16KM202-I/SS is the closest identified drop-in alternative because it retains the same PIC24F16KM202 base device, 32 MHz speed, 16 KB Flash, 2 KB RAM, and 28-SSOP footprint. Its principal difference is the higher maximum operating temperature of 125 °C rather than 85 °C. Before replacing the -E/SS device, confirm that the installed firmware, pin multiplexing, clock configuration, brown-out settings, and programming procedure remain compatible.
Can PIC24F16KM202-I/SS replace PIC24F16KM202-E/SS?
PIC24F16KM202-I/SS can physically serve as a drop-in replacement for PIC24F16KM202-E/SS because both use the same 28-SSOP package and share the same base PIC24F16KM202 device configuration. The measurable difference is maximum operating temperature: the -I/SS option reaches 125 °C, while the -E/SS option reaches 85 °C. Existing firmware and PCB artwork can generally be retained, subject to confirming the exact ordering code and peripheral configuration.
What is the best Microchip equivalent for PIC24F16KM202-E/SS?
PIC24F16KM202-I/SS is the best identified Microchip Technology equivalent because it preserves the 28-SSOP package, 32 MHz operating speed, 16 KB Flash memory, and 2 KB RAM of PIC24F16KM202-E/SS. The I/SS temperature grade reaches 125 °C compared with the E/SS maximum of 85 °C, adding temperature margin rather than changing the core device. No verified cross-manufacturer MCU with guaranteed pin-to-pin compatibility was identified for this exact ordering configuration.
What is the difference between PIC24F16KM202-E/SS and PIC24F16KM202-I/SS?
The primary difference is the operating-temperature grade. PIC24F16KM202-E/SS is rated to 85 °C, while PIC24F16KM202-I/SS is rated to 125 °C. Both are based on PIC24F16KM202, run up to 32 MHz, contain 16 KB Flash and 2 KB RAM, and use the 28-SSOP package. The Xecor comparison data also identifies both devices as surface-mount parts with an internal oscillator, making the I/SS version the preferable fit for environments above 85 °C.
When should I choose PIC24F16KM202-E/SS over PIC24F16KM202-I/SS?
Choose PIC24F16KM202-E/SS when the design operates within -40 °C to +85 °C and does not require the broader temperature rating. Choose PIC24F16KM202-I/SS when ambient or enclosure temperatures can reach 125 °C, because it preserves the same package, memory configuration, and processing speed while providing 40 °C more maximum-temperature margin. For either version, confirm the exact suffix, supply voltage, package footprint, and firmware support before releasing the production BOM.
Is PIC24F16KM202-E/SS suitable for industrial and instrumentation designs?
PIC24F16KM202-E/SS is suitable for many industrial and instrumentation designs operating below 85 °C. Its 32 MHz CPU, 12-bit ADC, operational amplifiers, 8-bit DAC, and multiple serial interfaces provide adequate resources for sensor conditioning, control, and communication. For environments that may exceed 85 °C, select the -I/SS temperature grade. According to the Microchip Technology manufacturer datasheet, final compliance with an industrial end-product standard must be assessed at the system level.
Where can I find the PIC24F16KM202-E/SS pinout?
The authoritative pin assignment is in the pin-description table of the Microchip Technology PIC24F16KM202 manufacturer datasheet. The device uses a 28-pin SSOP package measuring 5.30 mm wide, and its multiplexed functions include the ADC, DAC, operational amplifiers, I2C, IrDA, LINbus, SPI, and UART/USART interfaces. Do not infer alternate functions from the package drawing alone because pin multiplexing can depend on configuration bits, peripheral assignments, and the selected digital or analog mode.
Where to buy PIC24F16KM202-E/SS online?
Use the Request a Quote form on this page to inquire about PIC24F16KM202-E/SS availability, lot traceability, and order quantities. The form is the appropriate channel for current commercial terms because component pricing and inventory can change by date, quantity, and package configuration. Include the complete MPN PIC24F16KM202-E/SS in the request so the quote is tied to the correct 28-SSOP temperature-grade configuration.
What is the price of PIC24F16KM202-E/SS?
The current price of PIC24F16KM202-E/SS should be requested through the Request a Quote form on this page. Because pricing depends on order quantity, supply status, and the exact ordering suffix, use the form for a current transaction-ready quotation. Confirm that the quote identifies PIC24F16KM202-E/SS, the 28-SSOP package, and the -E temperature grade rather than a related SSOP or SO configuration.
What is the lead time and is PIC24F16KM202-E/SS in stock?
Request the current lead time, minimum order quantity, and stock status through the Request a Quote form on this page. Lead time can vary with manufacturer inventory, lot status, order size, and packaging requirements, so a dated stock statement should accompany any quotation. Specify whether the shipment should use the manufacturer's standard SSOP tube packaging and provide the target delivery date when requesting the quote.
What programming and tool compatibility should be checked for PIC24F16KM202-E/SS?
Use a programming and development toolchain that explicitly supports the PIC24F16KM202 family and the PIC24 16-bit architecture. The confirmed device resources include 16 KB Flash, 2 KB RAM, internal clocking, and the PIC24 peripheral set; however, the compiler, debugger, linker configuration, programming algorithm, and boot or application-code strategy must still match the exact MCU. Review the Microchip Technology programming and device-support documentation before creating a production programming fixture.
Is PIC24F16KM202-E/SS RoHS compliant?
PIC24F16KM202-E/SS is listed as RoHS compliant for environmentally friendly operation. According to the manufacturer product information, the device also belongs to the PIC24F16KM202 family with an extended-temperature ordering option. RoHS status applies to the component and its stated materials framework; it does not automatically certify the finished product. Confirm assembly, soldering, and system-level material requirements separately when releasing an end product into a regulated market.

के लिए इंजीनियरिंग संदर्भ डेटा PIC24F16KM202-E/SS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose PIC24F16KM202-E/SS for compact embedded products whose maximum ambient temperature is 85 °C or below. Its 32 MHz 16-bit PIC core, 16 KB Flash, 2 KB RAM, 12-bit ADC, 8-bit DAC, operational amplifiers, and multiple serial interfaces provide ample functionality for low-power sensing, monitoring, data logging, and analog control. Select PIC24F16KM202-I/SS when the same PCB and firmware must operate from -40 °C to 125 °C. The -I/SS version provides 40 °C additional temperature margin without changing the identified package or core device resources. Do not select PIC24F16KM202-E/SO as a direct replacement because its SO package differs from the 28-SSOP footprint. For any substitution, verify memory requirements, peripheral pin multiplexing, programming support, supply voltage, and the operating-temperature envelope before production release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PIC24F16KM202-I/SS
Brand Microchip Technology Microchip Technology
Package 28-SSOP 28-SSOP - same package
Core Processor 16-bit PIC 16-bit PIC
Maximum CPU Frequency 32 MHz 32 MHz
Flash Program Memory 16 KB 16 KB
RAM 2 KB 2 KB
Maximum Operating Temperature 85 °C 125 °C
Operating Voltage 2.5 V / 3.3 V 2.5 V / 3.3 V
Integrated ADC 12-bit 12-bit
Integrated DAC 8-bit 8-bit
Mounting Type Surface Mount Surface Mount
Oscillator Internal Internal

मुख्य विशेषताएँ

  • Broader temperature capability in the identified alternative (बनामPIC24F16KM202-I/SS)
  • Mixed-signal integration reduces external component count (बनामPIC24F16KM202-I/SS)
  • Compact embedded control with multiple serial protocols (बनामPIC24F16KM202-I/SS)

डिज़ाइन नोट्स

Place the required supply-decoupling capacitors close to the corresponding VDD and VSS pins, and provide a short return path beneath the device where the manufacturer layout guidance permits it. Keep analog inputs away from PWM outputs, switching nodes, and high-current return paths. The 28-SSOP footprint is compact, so violating these placement rules can add more noise and settling error than the nominal 12-bit ADC resolution would suggest.

Design the power tree for either 2.5 V or 3.3 V operation and confirm that every connected sensor, transceiver, and output driver uses compatible logic levels. The internal oscillator simplifies clocking, but power-dependent timing accuracy still depends on the selected operating conditions and configuration. For battery-powered products, measure average current across each active and sleep state rather than relying only on the maximum CPU frequency specification.

Treat the ADC and operational-amplifier pins as sensitive analog signals. Use short traces, maintain a continuous ground reference beneath the analog section, and isolate inputs from adjacent digital activity. When using the DAC or PWM outputs to drive external circuitry, check output settling and loading against the datasheet limits. The 8-bit DAC and 12-bit ADC should not be treated as interchangeable high-resolution signal sources.

Confirm the ordering suffix at three checkpoints: schematic approval, PCB release, and programming setup. PIC24F16KM202-I/SS has the same 28-SSOP footprint as the target but supports a higher maximum temperature, whereas PIC24F16KM202-E/SO uses a different SO package and is not a footprint-compatible substitution. Also ensure that the firmware target, peripheral pin assignments, and programming algorithm match the MCU selected for production.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product comparison identifies PIC24F16KM202-E/SS as RoHS compliant. No additional REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was confirmed for this ordering configuration.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

pic24f16km202 datasheet PIC24F16KM202-E/SS datasheet pdf PIC24F16KM202-E/SS pinout PIC24F16KM202-E/SS specifications PIC24F16KM202 32MHz 16KB Flash PIC24F16KM202 28-SSOP pinout PIC24F16KM202-E/SS equivalent PIC24F16KM202-E/SS replacement PIC24F16KM202-E/SS vs PIC24F16KM202-I/SS Microchip PIC24F16KM202-E/SS PIC24F16KM202-E/SS price PIC24F16KM202 low power sensor application PIC24F16KM202-E/SS programming

संबंधित कंपोनेंट्स और शब्द

Microchip Technology PIC24F16KM202-E/SS PIC24F16KM202 PIC24F16KM202-I/SS PIC24F16KM202-E/SO PIC24F16KM202-I/SP PIC24FV08KM101-E/SS PIC24 16-bit microcontroller embedded controller PIC XLP eXtreme Low Power PIC core 12-bit ADC 8-bit DAC operational amplifier configurable logic cell I2C SPI UART/USART LINbus IrDA Capture/Compare/PWM 28-SSOP surface mount RoHS internal oscillator
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें