PIC24F16KM202-E/SS - 32MHz 16-bit XLP MCU | Microchip
N.º da peça: PIC24F16KM202-E/SS ✓ AtivoPIC24F16KM202-E/SS Visão geral
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The PIC24F16KM202 belongs to the PIC24 16-bit MCU family and the broader embedded-controller hierarchy. Its XLP design emphasizes low power consumption for battery-operated and energy-conscious equipment, while the integrated analog peripherals reduce the need for external converters and signal-conditioning components.
The principal features of this device are its 32 MHz maximum operating frequency, 16 KB Flash memory, and 2 KB SRAM. Analog integration includes a 12-bit ADC, 8-bit DAC, and operational amplifiers. Flexible capture, compare, and PWM modules support timing and motor-control functions, while the configurable logic cell assists with simple hardware logic. An internal oscillator eliminates the need for an external clock in many designs.
The PIC24F16KM202 combines a PIC core, 16 KB Flash, and 2 KB RAM in a low-pin-count 28-SSOP package. The -E suffix identifies the extended-temperature option, and /SS denotes the SSOP package configuration. The device is designed for compact embedded systems where analog measurement, serial communication, control logic, and low-power operation are required without a large external component count.
Typical uses include low-power sensor nodes, industrial control modules, compact data loggers, consumer accessories, battery-powered instruments, and embedded communication equipment. Its multiple serial interfaces allow connection to sensors, displays, transceivers, and other digital peripherals, while the ADC and operational amplifiers can simplify analog front-end implementation.
For PCB design, place decoupling capacitors close to the power pins and route sensitive analog inputs away from switching nodes and high-current outputs. Confirm the required operating voltage, peripheral pin multiplexing, and analog configuration in the manufacturer datasheet. For software, select the correct PIC24 device family and pin assignment in the development toolchain before committing the PCB layout.
This page combines the PIC24F16KM202 technical profile, application guidance, package information, verified same-footprint alternatives, and design checks that help engineers move from component selection to implementation. It also identifies where a direct substitute must be reviewed for package, temperature range, and firmware compatibility before use.
Alternativas drop-in para PIC24F16KM202-E/SS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24F16KM202-E/SS (mesmo formato e footprint) — diferindo em Operating Temperature, Package.
PIC24F16KM202-I/SS
✅ Drop-InConsulte o preço
Ver ficha técnica →PIC24F16KM202-E/SS Classificações máximas e características elétricas
| Microcontroller Family | PIC24 16-bit MCU |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 16 KB Flash |
| Program Memory Organization | 5.5K x 24 |
| Data Memory | 2 KB RAM |
| ADC Resolution | 12 bit |
| DAC Resolution | 8 bit |
| Integrated Analog Resources | 12-bit ADC, 8-bit DAC, and operational amplifiers |
| Oscillator | Internal |
| Serial Interfaces | I2C, IrDA, LINbus, SPI, and UART/USART |
| Timer and Control Peripherals | Capture, Compare, PWM modules, and configurable logic cell |
| Operating Voltage | 2.5 V / 3.3 V |
| Temperatura de operação | -40 °C to +85 °C |
| Encapsulamento | 28-pin SSOP |
| Package Width | 5.30 mm (0.209 inch) |
| Tipo de montagem | Surface Mount |
| Low-Power Feature | PIC XLP eXtreme Low Power |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do PIC24F16KM202-E/SS 5.30 mm (0.209 inch)
Configuração de pinos para PIC24F16KM202-E/SS (pacote 5.30 mm (0.209 inch)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC24F16KM202-E/SS.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC24F16KM202-E/SS é adequado para 6 aplicaçãos: Low-Power Sensor Nodes, Industrial Control and Monitoring, Battery-Powered Data Loggers, Compact Communication Equipment, Consumer Accessories and Embedded Controls, Precision Analog Control Systems.
Low-Power Sensor Nodes
PIC24F16KM202-E/SS fits compact sensor nodes because its 32 MHz PIC core provides responsive local processing while the XLP architecture supports power-conscious operation. The integrated 12-bit ADC and operational amplifiers can acquire and condition analog sensor signals without requiring separate converter and amplifier packages, while 2 KB RAM supports short measurement and control buffers. I2C and SPI provide practical links to environmental, motion, and pressure sensors. For battery-powered deployments, configure sleep modes and wake sources through the manufacturer firmware workflow, and verify the analog settling behavior against the selected sensor output impedance.
Recomendado
Industrial Control and Monitoring
PIC24F16KM202-E/SS is appropriate for compact industrial monitoring and control modules where processing speed, analog measurement, and serial communications must coexist in one device. The 12-bit ADC supports sensor acquisition, the operational amplifiers assist with conditioning, and the configurable logic cell can implement simple hardware decisions near the input. Capture, compare, and PWM peripherals support timing, motor-control, or actuator functions. The 28-SSOP footprint reduces board area, although engineers should preserve copper for thermal dissipation and use the manufacturer layout guidance for sensitive analog routing.
Recomendado
Battery-Powered Data Loggers
PIC24F16KM202-E/SS supports compact data loggers that periodically measure analog inputs and store results locally. Its internal oscillator eliminates the external crystal normally required for accurate timing, and the 16 KB Flash provides space for firmware and nonvolatile data while 2 KB RAM handles active logging buffers. I2C is useful for adding external memory or digital sensors, and UART/USART supports connection to a host module. Low-power design should focus on duty-cycled acquisition, peripheral shutdown between samples, and validated retention requirements; the manufacturer datasheet should guide sleep-mode and timing configuration.
Recomendado
Compact Communication Equipment
PIC24F16KM202-E/SS suits compact communication equipment that needs several serial protocols without occupying a large board area. UART/USART supports general serial links, SPI accommodates higher-speed peripherals, and I2C is useful for sensors and configuration devices; LINbus and IrDA extend the design options for local networking or optical-style links. At 32 MHz, the MCU can service protocol tasks while coordinating local analog and control functions. Firmware must reserve the required peripheral pins and consider interrupt latency, bus timing, and buffer capacity. The 28-SSOP package also keeps connector-heavy products physically compact.
Recomendado
Consumer Accessories and Embedded Controls
PIC24F16KM202-E/SS can manage compact consumer accessories that combine capacitive or resistive sensing, simple actuator control, and status communication. The mixed-signal resources allow an analog input and operational-amplifier stage to share the MCU with digital control logic, reducing the number of external components in a 28-SSOP design. The internal oscillator supports economical clocking when the application does not require a crystal reference. Designers should confirm start-up behavior, output drive capability, analog settling, and peripheral pin reuse in the manufacturer datasheet, particularly when the accessory contains motors, relays, or long external wiring.
Recomendado
Precision Analog Control Systems
PIC24F16KM202-E/SS is useful in compact analog control systems where an MCU must measure, compare, and regulate a physical variable. The 12-bit ADC supplies the measurement interface, the 8-bit DAC provides a basic analog output, and the integrated operational amplifiers can support signal conditioning around the control loop. Capture, compare, and PWM peripherals assist with deterministic actuator timing, while the configurable logic cell can handle simple peripheral functions. The -E temperature range covers -40 °C to +85 °C; systems operating hotter should use the -I/SS version. Validate loop stability and analog accuracy with the manufacturer application guidance.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24F16KM202-E/SS — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24F16KM202-I/SS |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 28-SSOP | 28-SSOP - same package |
| Core Processor | 16-bit PIC | 16-bit PIC |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Program Memory | 16 KB | 16 KB |
| RAM | 2 KB | 2 KB |
| Maximum Operating Temperature | 85 °C | 125 °C |
| Operating Voltage | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
| Integrated ADC | 12-bit | 12-bit |
| Integrated DAC | 8-bit | 8-bit |
| Mounting Type | Surface Mount | Surface Mount |
| Oscillator | Internal | Internal |
Principais diferenciais
- Broader temperature capability in the identified alternative (vs PIC24F16KM202-I/SS)
- Mixed-signal integration reduces external component count (vs PIC24F16KM202-I/SS)
- Compact embedded control with multiple serial protocols (vs PIC24F16KM202-I/SS)
Notas de projeto
Place the required supply-decoupling capacitors close to the corresponding VDD and VSS pins, and provide a short return path beneath the device where the manufacturer layout guidance permits it. Keep analog inputs away from PWM outputs, switching nodes, and high-current return paths. The 28-SSOP footprint is compact, so violating these placement rules can add more noise and settling error than the nominal 12-bit ADC resolution would suggest.
Design the power tree for either 2.5 V or 3.3 V operation and confirm that every connected sensor, transceiver, and output driver uses compatible logic levels. The internal oscillator simplifies clocking, but power-dependent timing accuracy still depends on the selected operating conditions and configuration. For battery-powered products, measure average current across each active and sleep state rather than relying only on the maximum CPU frequency specification.
Treat the ADC and operational-amplifier pins as sensitive analog signals. Use short traces, maintain a continuous ground reference beneath the analog section, and isolate inputs from adjacent digital activity. When using the DAC or PWM outputs to drive external circuitry, check output settling and loading against the datasheet limits. The 8-bit DAC and 12-bit ADC should not be treated as interchangeable high-resolution signal sources.
Confirm the ordering suffix at three checkpoints: schematic approval, PCB release, and programming setup. PIC24F16KM202-I/SS has the same 28-SSOP footprint as the target but supports a higher maximum temperature, whereas PIC24F16KM202-E/SO uses a different SO package and is not a footprint-compatible substitution. Also ensure that the firmware target, peripheral pin assignments, and programming algorithm match the MCU selected for production.
Informações de conformidade
The available product comparison identifies PIC24F16KM202-E/SS as RoHS compliant. No additional REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification statement was confirmed for this ordering configuration.