Renesas Electronics

R5F104LEAFA#30 - 16-Bit 32MHz 64KB MCU | Renesas

MPN: R5F104LEAFA#30 ✓ सक्रिय
64-LQFP Package 32 MHz Speed 64 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

R5F104LEAFA#30 अवलोकन

Renesas Electronics R5F104LEAFA#30 is a low-power 16-bit RL78/G14 microcontroller operating at 32 MHz, with 64 KB of flash memory and a 64-LQFP package measuring 12 mm by 12 mm. The device is positioned for general-purpose industrial, motor-control, and metering designs that require efficient embedded processing in a compact surface-mount package.

A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals into one component. Within the embedded-control hierarchy, the RL78/G14 family belongs to Renesas's RL78 family of low-power 16-bit MCUs. This family is intended to provide a practical balance of processing performance, energy efficiency, peripheral integration, and software support for control-oriented products.

Three headline characteristics define this configuration: a 16-bit RL78/G14 processor operating at 32 MHz, 64 KB of flash program memory organized as 64K by 8 bits, and a 64-LQFP surface-mount package. The listed operating-temperature range is -40 °C to +85 °C, making the device applicable to industrial temperature conditions. Its low-power positioning also suits equipment that spends significant time in standby or periodically inactive states.

Renesas identifies the R5F104LEAFA#30 for motor-control, industrial, and metering applications. Those use cases benefit from a deterministic embedded-control platform with local program storage and a compact pin count. The manufacturer positions the RL78/G14 as a low-power, high-function general-purpose MCU family, making it suitable for measurement instruments, motor-related controllers, and compact automation products where a higher-function MCU is needed without moving to a larger processor architecture.

A typical design places the MCU beside power regulation, sensing, signal conditioning, and output drivers. Firmware can perform acquisition, control calculations, communications, and fault handling while the LQFP package permits conventional reflow assembly and accessible inspection during manufacturing. The 12 mm by 12 mm package provides more board area than a small-leadless package, which can ease routing and rework on cost-sensitive control boards.

The primary engineering consideration is firmware and peripheral verification. Designers should confirm the exact pin assignments, peripheral mix, startup behavior, clock configuration, and timing limits in the manufacturer datasheet before schematic release. They should also validate regulator headroom, decoupling, reset behavior, and any motor-interface isolation so that the 32 MHz control core and surrounding circuitry meet the application's safety and timing requirements.

This page combines the confirmed device identity with application-focused engineering guidance, package-aware replacement criteria, and practical selection considerations. It is intended to help engineers quickly determine whether the RL78/G14 architecture and 64-LQFP construction fit a new embedded-control design.

के लिए ड्रॉप-इन विकल्प R5F104LEAFA#30 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

R5F104LEAFA#V0

✅ ड्रॉप-इन
📦 64-LQFP
CPU frequency is 32 MHz and flash is 64 KB, a 0% difference in those two key parameters; the ordering and temperature designation differ and require final qualification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F104LJAFB#30

✅ ड्रॉप-इन
📦 64-LQFP
CPU frequency is 32 MHz, a 0% difference, while the ordering code changes the device option and may change RAM or peripheral resources

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F104LEAFB#30

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 64-LQFP
CPU frequency is 32 MHz and flash is 64 KB, both matching the target by 0%; the family suffix selects a different device option

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F104LJAFB#55

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 64-LQFP
CPU frequency is 32 MHz, a 0% difference, while the ordering suffix changes the package or temperature ordering option

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F104LEAFA#55

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 64-LQFP
CPU frequency is 32 MHz and flash is 64 KB, both matching by 0%; only the ordering option differs, so final temperature qualification is required

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

R5F104LEAFA#30 Maximum Ratings और Electrical Characteristics

Product Type 16-bit microcontroller (MCU)
Series RL78/G14
CPU Architecture 16-bit
अधिकतम क्लॉक फ़्रीक्वेंसी 32 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
पैकेज 64-LQFP
Package Dimensions 12 mm x 12 mm
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान -40 °C to +85 °C
Power Class Low-power general-purpose MCU
Application Category Motor control
Application Category Industrial
Application Category Metering

R5F104LEAFA#30 12 mm x 12 mm पिन कॉन्फ़िगरेशन गाइड

R5F104LEAFA#30 (12 mm x 12 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

R5F104LEAFA#30 के लिए 12 mm x 12 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: R5F104LEAFA#30.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

R5F104LEAFA#30 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Control, Smart Metering, Industrial Automation Controller, Battery-Powered Sensor Node, Instrumentation and Data Acquisition, Consumer Equipment Controller.

🏭

Industrial Motor Control

The R5F104LEAFA#30 fits compact motor-control controllers because its RL78/G14 core operates at 32 MHz and provides 64 KB of program flash for control algorithms, state handling, and diagnostics. The 64-LQFP package provides 64 terminals for a motor interface, sensors, communications, and control signals, while the listed -40 °C to +85 °C range suits industrial ambient conditions. Engineers should allocate timer outputs for PWM generation, validate motor-driver fault handling, and confirm that the selected MCU variant includes every required peripheral before schematic release.

🔧

Smart Metering

The R5F104LEAFA#30 is appropriate for metering equipment because it combines a 16-bit RL78/G14 processor, 32 MHz operating frequency, and 64 KB flash in a 12 mm by 12 mm LQFP package. Firmware can perform signal acquisition, calibration, accumulation, event logging, and communications management within one controller. For accurate metering, verify the ADC characteristics, voltage reference, timer resolution, and low-power modes in the manufacturer datasheet, and isolate analog inputs from switching and motor-drive noise.

🏭

Industrial Automation Controller

The R5F104LEAFA#30 can serve as the central controller in a small industrial automation module that must interpret inputs, execute sequencing logic, and coordinate outputs. Its 32 MHz RL78/G14 processing core provides useful control bandwidth, while 64 KB of flash supports an embedded application without an external program-memory device. The 64-LQFP layout offers a practical balance between functional pin access and board area. Validate communication timing, isolated I/O margins, watchdog behavior, and brownout handling in the final power and signal environment.

🧩

Battery-Powered Sensor Node

The low-power RL78/G14 positioning of the R5F104LEAFA#30 makes it a candidate for battery-powered sensor nodes that periodically measure a physical quantity and sleep between updates. Its 16-bit architecture and 32 MHz clock can handle acquisition, filtering, and local processing, while 64 KB of flash accommodates firmware and calibration data. The system benefit depends on the exact MCU variant's standby and wake-up characteristics, so engineers should compare active and sleep currents, use the RTC or timer correctly, and size the supply for peak radio or actuator load transients.

📺

Instrumentation and Data Acquisition

The R5F104LEAFA#30 can coordinate data acquisition in compact instrumentation with multiple analog inputs and digital controls. At 32 MHz, the 16-bit RL78/G14 processor can execute scaling, filtering, compensation, and protocol handling while retaining up to 64 KB of program memory. Its 64-LQFP package exposes the required interface signals without moving to a large fine-pitch package. Critical accuracy depends on reference-voltage stability, grounding, analog filtering, and acquisition timing, all of which should be verified against the complete manufacturer electrical specifications.

📱

Consumer Equipment Controller

The R5F104LEAFA#30 can manage compact consumer equipment that needs deterministic embedded control, local flash storage, and a moderate number of mixed-signature I/O pins. The 32 MHz core supports responsive user-interface state management and peripheral coordination, and the 64-LQFP package is straightforward for conventional assembly. In a consumer product, verify the exact option's operating range, brownout behavior, flash endurance expectations, and production programming process. Firmware should also include safe outputs that remain in a defined state during reset or supply loss.

What is the R5F104LEAFA#30?
The R5F104LEAFA#30 is a Renesas RL78/G14 low-power 16-bit microcontroller with a 32 MHz operating frequency, 64 KB of flash memory, and a 64-LQFP package. According to the Renesas product page, the device is intended for motor-control, industrial, and metering applications. Its 64K x 8-bit flash organization provides embedded program storage in a compact surface-mount component measuring 12 mm by 12 mm.
What are the key specifications of R5F104LEAFA#30 that engineers should know?
The R5F104LEAFA#30 is a 16-bit RL78/G14 microcontroller rated at 32 MHz with 64 KB of 64K x 8-bit flash memory. It is packaged as 64-LQFP, a 12 mm by 12 mm surface-mount format, and its listed operating-temperature range is -40 °C to +85 °C. The Renesas manufacturer page positions it for low-power general-purpose motor-control, industrial, and metering equipment.
Where can I download the R5F104LEAFA#30 datasheet PDF?
The R5F104LEAFA#30 datasheet should be obtained from the official Renesas product page linked on this page. The manufacturer page provides the device documentation and product ordering information. Use the manufacturer PDF for authoritative pin assignments, peripheral details, electrical limits, timing diagrams, and package drawings rather than relying on a distributor summary when releasing a production schematic.
Where can I find the R5F104LEAFA#30 pinout?
The R5F104LEAFA#30 pinout is defined by the manufacturer datasheet for the 64-LQFP package. The verified product identity establishes a 64-pin LQFP, but it does not reproduce the individual terminal names. Use the pin-description and package-outline tables in the manufacturer datasheet when assigning PCB nets, especially for power, ground, reset, clock, programming, and multifunction peripheral terminals.
Is the R5F104LEAFA#30 suitable for industrial control systems?
Yes, the R5F104LEAFA#30 is suitable for many industrial control applications because it is an RL78/G14 general-purpose MCU with a 32 MHz processor, 64 KB of flash, and a listed operating range of -40 °C to +85 °C. The Renesas manufacturer page explicitly identifies industrial applications. Final suitability still depends on environmental exposure, required peripherals, functional safety obligations, and the complete electrical limits in the datasheet.
What can replace the R5F104LEAFA#30?
A valid replacement must use the same 64-LQFP footprint, preserve pin assignments, and provide compatible memory and peripheral resources. R5F104LEAFA#V0 is the closest identified Renesas-family candidate, but its exact temperature and ordering characteristics should be confirmed before substitution. No cross-brand drop-in replacement is established by the available cross-reference information, so a different MCU manufacturer should not be treated as a direct replacement without a completed pin and firmware verification.
Is R5F104LEAFA#V0 the same as R5F104LEAFA#30?
R5F104LEAFA#V0 is closely related to the R5F104LEAFA#30 within the same RL78/G14 family and 64-LQFP device family, but the ordering suffixes must be checked before treating them as identical. The temperature designation and orderable configuration are the principal items to confirm against the manufacturer datasheet. For an existing PCB, verify every pin, memory requirement, peripheral function, clock setting, and software constraint before replacing the #30 device with the #V0 device.
R5F104LEAFA#30 vs R5F104LJAFB#30: which is better for motor control?
The correct choice depends on the specific peripheral set, memory requirements, temperature qualification, and pin compatibility of the two orderable devices. Both names identify members of the Renesas RL78 family, and the cross-reference material identifies R5F104LJAFB#30 for comparison. Do not assume equivalence solely from the shared 32 MHz RL78/G14 platform; compare the manufacturer pin table, PWM and timer resources, analog functions, RAM, and package suffix before selecting one for a motor-control board.
When should I choose R5F104LEAFA#30 over another RL78/G14 device?
Choose the R5F104LEAFA#30 when a design specifically requires the identified 32 MHz RL78/G14 configuration, 64 KB flash, 64-LQFP footprint, and -40 °C to +85 °C operating range. It is especially relevant to motor-control, industrial, and metering products that can use the device's documented low-power general-purpose positioning. Select another family member instead when its additional RAM, peripherals, temperature grade, package, or qualification better satisfies the product specification.
Is R5F104LEAFA#30 suitable for metering applications?
Yes, the Renesas manufacturer page identifies metering as an intended application for the R5F104LEAFA#30. Its 16-bit RL78/G14 architecture, 32 MHz operating frequency, and 64 KB of flash support embedded measurement, control, and communications functions. A metering design should still verify the required ADC accuracy, reference accuracy, timer behavior, display or communications interfaces, calibration method, and low-power operating modes in the complete manufacturer documentation.
Where to buy R5F104LEAFA#30 online?
Use the Request a Quote form on this page to request current availability, order quantity, and delivery information for the R5F104LEAFA#30. Quote-based procurement is appropriate because current stock, lead time, and order breaks can change independently of the technical product record. Submit the exact 64-LQFP orderable MPN and your required quantities so the returned commercial offer matches the intended configuration.
What is the price of R5F104LEAFA#30?
The current unit price is not stated as a stable value on this product page. Use the Request a Quote form on this page to obtain pricing for the exact R5F104LEAFA#30 configuration and your required quantities. The quote can also account for packaging, scheduled delivery, and production-volume requirements, which are more useful than a nominal single-unit figure for an embedded MCU.
What is the lead time for R5F104LEAFA#30?
The current production lead time for R5F104LEAFA#30 should be requested through the Request a Quote form on this page. Lead time can depend on order quantity, allocation, package configuration, and purchasing schedule. Include the required delivery date and annual usage in the request, then confirm any date-sensitive allocation before committing the product design to production.
Is R5F104LEAFA#30 in stock?
Current R5F104LEAFA#30 inventory should be confirmed through the Request a Quote form on this page. Listing pages and catalog records do not guarantee immediately available stock for a specific production order. Provide the required quantity and target delivery date so the commercial response can reflect the exact 64-LQFP orderable part and the current supply position.
What is the best cross-brand equivalent for R5F104LEAFA#30?
No verified cross-brand drop-in equivalent is established for the R5F104LEAFA#30. A competing 16-bit MCU would need the same 64-LQFP footprint, compatible terminal assignments, suitable flash and RAM, equivalent motor-control peripherals, and software support that can be ported without redesign. The available cross-reference results identify tools and related Renesas devices but do not provide a defensible cross-brand part, so engineers should use Renesas family variants or conduct a full design review.

के लिए इंजीनियरिंग संदर्भ डेटा R5F104LEAFA#30 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the R5F104LEAFA#30 when the design requires the specifically identified 32 MHz RL78/G14 microcontroller with 64 KB of flash in a 64-LQFP package and an operating range of -40 °C to +85 °C. It is a practical fit for motor-control, industrial, and metering designs where local program storage, a 16-bit control architecture, and conventional surface-mount assembly are important. R5F104LEAFA#V0 is the first same-family candidate to evaluate because it appears in cross-reference results, but its temperature and ordering characteristics must be confirmed. R5F104LJAFB#30 is relevant when its memory or peripheral configuration better matches the design; compare RAM and every assigned terminal rather than relying on the shared family name. The remaining RL78/G14 ordering options should be used only after a complete pin, electrical, and firmware comparison. No cross-brand option should be treated as a drop-in choice without a full redesign or a verified pin-to-pin migration.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद R5F104LEAFA#V0 R5F104LJAFB#30 R5F104LEAFB#30 R5F104LJAFB#55 R5F104LEAFA#55
Package 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP 64-LQFP
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Series RL78/G14 RL78/G14 RL78 RL78/G14 RL78 RL78/G14
CPU Architecture 16-bit 16-bit 16-bit 16-bit 16-bit 16-bit
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB 64 KB
Package Dimensions 12 mm x 12 mm 12 mm x 12 mm 12 mm x 12 mm 12 mm x 12 mm 12 mm x 12 mm 12 mm x 12 mm

मुख्य विशेषताएँ

  • Targeted RL78/G14 configuration for embedded control (बनामR5F104LJAFB#30)
  • Established 64 KB flash configuration (बनामR5F104LEAFB#30)
  • Industrial-temperature operating range (बनामR5F104LEAFA#55)

डिज़ाइन नोट्स

Design the supply rail to satisfy the exact electrical limits in the manufacturer datasheet, including input range, startup current, and peak current demanded by the 32 MHz operating mode. Place local bulk and high-frequency decoupling close to the MCU supply terminals, keep return-current paths short, and use separate filtering branches for analog or communication loads. Brownout behavior must be checked against the controlled outputs because a partial rail failure can otherwise leave external actuators in an unintended state.

Use the 64-LQFP manufacturer's land pattern and pin table without changing pad dimensions or pin numbering. Route the clock and sensitive analog inputs away from switching nodes and high-current motor-drive paths, and provide a quiet ground reference for measurement circuits. Although the 12 mm by 12 mm package is larger than a typical leadless MCU, pin escape angles are still limited; perform a footprint-aware placement review before finalizing placement, particularly around decoupling capacitors, programming-header access, and thermal copper.

Do not treat a shared RL78/G14 family label as proof that every ordering suffix is interchangeable. Before substituting an alternative, compare the complete pin description, peripheral allocation, RAM, flash organization, clock limits, temperature grade, and programming configuration. Also verify the reset, watchdog, and brownout behavior in firmware because these controls affect safe startup and recovery. A package photograph or distributor comparison table is not sufficient for production qualification.

Estimated: the MCU dissipation depends on supply voltage, clock activity, and the selected device's electrical characteristics, none of which permit a reliable numerical thermal calculation from the identified product summary alone. Use the datasheet current and voltage limits to calculate worst-case internal dissipation, then confirm junction-temperature margin with the package thermal data and PCB copper. Motor drivers and regulators should be evaluated separately because nearby heat sources can raise the ambient temperature seen by the MCU.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status requires confirmation from the manufacturer product documentation or declaration for the exact ordering code.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

R5F104LEAFA#30 datasheet R5F104LEAFA#30 specifications R5F104LEAFA#30 pinout R5F104LEAFA#30 datasheet pdf Renesas R5F104LEAFA#30 R5F104LEAFA#30 equivalent R5F104LEAFA#30 replacement R5F104LEAFA#30 vs R5F104LJAFB#30 R5F104LEAFA#30 price R5F104LEAFA#30 stock R5F104LEAFA#30 64-LQFP R5F104LEAFA#30 motor control

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics R5F104LEAFA#30 R5F104LEAFA#V0 R5F104LJAFB#30 R5F104LEAFB#30 R5F104LJAFB#55 R5F104LEAFA#55 RL78/G14 RL78 microcontroller MCU 16-bit microcontroller embedded controller semiconductor 32 MHz clock 64 KB flash memory 64K x 8-bit flash 64-LQFP LQFP package family surface mount SMD motor control industrial automation smart metering battery-powered sensor node
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें