R5F104LEAFA#30 - 16-Bit 32MHz 64KB MCU | Renesas
MPN: R5F104LEAFA#30 ✓ NakahandaR5F104LEAFA#30 Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, and peripherals into one component. Within the embedded-control hierarchy, the RL78/G14 family belongs to Renesas's RL78 family of low-power 16-bit MCUs. This family is intended to provide a practical balance of processing performance, energy efficiency, peripheral integration, and software support for control-oriented products.
Three headline characteristics define this configuration: a 16-bit RL78/G14 processor operating at 32 MHz, 64 KB of flash program memory organized as 64K by 8 bits, and a 64-LQFP surface-mount package. The listed operating-temperature range is -40 °C to +85 °C, making the device applicable to industrial temperature conditions. Its low-power positioning also suits equipment that spends significant time in standby or periodically inactive states.
Renesas identifies the R5F104LEAFA#30 for motor-control, industrial, and metering applications. Those use cases benefit from a deterministic embedded-control platform with local program storage and a compact pin count. The manufacturer positions the RL78/G14 as a low-power, high-function general-purpose MCU family, making it suitable for measurement instruments, motor-related controllers, and compact automation products where a higher-function MCU is needed without moving to a larger processor architecture.
A typical design places the MCU beside power regulation, sensing, signal conditioning, and output drivers. Firmware can perform acquisition, control calculations, communications, and fault handling while the LQFP package permits conventional reflow assembly and accessible inspection during manufacturing. The 12 mm by 12 mm package provides more board area than a small-leadless package, which can ease routing and rework on cost-sensitive control boards.
The primary engineering consideration is firmware and peripheral verification. Designers should confirm the exact pin assignments, peripheral mix, startup behavior, clock configuration, and timing limits in the manufacturer datasheet before schematic release. They should also validate regulator headroom, decoupling, reset behavior, and any motor-interface isolation so that the 32 MHz control core and surrounding circuitry meet the application's safety and timing requirements.
This page combines the confirmed device identity with application-focused engineering guidance, package-aware replacement criteria, and practical selection considerations. It is intended to help engineers quickly determine whether the RL78/G14 architecture and 64-LQFP construction fit a new embedded-control design.
Mga alternatibo na pwedeng ilagay na R5F104LEAFA#30 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
R5F104LEAFA#V0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104LJAFB#30
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104LEAFB#30
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
R5F104LJAFB#55
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
R5F104LEAFA#55
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
R5F104LEAFA#30 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit microcontroller (MCU) |
| Series | RL78/G14 |
| CPU Architecture | 16-bit |
| Maksimum na Taktiko ng Oras | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Packhaging | 64-LQFP |
| Package Dimensions | 12 mm x 12 mm |
| Uri ng Pagpapasok | Surface mount |
| Temperature na Operasyon | -40 °C to +85 °C |
| Power Class | Low-power general-purpose MCU |
| Application Category | Motor control |
| Application Category | Industrial |
| Application Category | Metering |
Gabay sa Pin Configuration ng R5F104LEAFA#30 12 mm x 12 mm
Pin configuration para sa R5F104LEAFA#30 (12 mm x 12 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa R5F104LEAFA#30.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
R5F104LEAFA#30 ay nararapat para sa 6 aplikasyons: Industrial Motor Control, Smart Metering, Industrial Automation Controller, Battery-Powered Sensor Node, Instrumentation and Data Acquisition, Consumer Equipment Controller.
Industrial Motor Control
The R5F104LEAFA#30 fits compact motor-control controllers because its RL78/G14 core operates at 32 MHz and provides 64 KB of program flash for control algorithms, state handling, and diagnostics. The 64-LQFP package provides 64 terminals for a motor interface, sensors, communications, and control signals, while the listed -40 °C to +85 °C range suits industrial ambient conditions. Engineers should allocate timer outputs for PWM generation, validate motor-driver fault handling, and confirm that the selected MCU variant includes every required peripheral before schematic release.
Inirekomenda
Smart Metering
The R5F104LEAFA#30 is appropriate for metering equipment because it combines a 16-bit RL78/G14 processor, 32 MHz operating frequency, and 64 KB flash in a 12 mm by 12 mm LQFP package. Firmware can perform signal acquisition, calibration, accumulation, event logging, and communications management within one controller. For accurate metering, verify the ADC characteristics, voltage reference, timer resolution, and low-power modes in the manufacturer datasheet, and isolate analog inputs from switching and motor-drive noise.
Inirekomenda
Industrial Automation Controller
The R5F104LEAFA#30 can serve as the central controller in a small industrial automation module that must interpret inputs, execute sequencing logic, and coordinate outputs. Its 32 MHz RL78/G14 processing core provides useful control bandwidth, while 64 KB of flash supports an embedded application without an external program-memory device. The 64-LQFP layout offers a practical balance between functional pin access and board area. Validate communication timing, isolated I/O margins, watchdog behavior, and brownout handling in the final power and signal environment.
Inirekomenda
Battery-Powered Sensor Node
The low-power RL78/G14 positioning of the R5F104LEAFA#30 makes it a candidate for battery-powered sensor nodes that periodically measure a physical quantity and sleep between updates. Its 16-bit architecture and 32 MHz clock can handle acquisition, filtering, and local processing, while 64 KB of flash accommodates firmware and calibration data. The system benefit depends on the exact MCU variant's standby and wake-up characteristics, so engineers should compare active and sleep currents, use the RTC or timer correctly, and size the supply for peak radio or actuator load transients.
Inirekomenda
Instrumentation and Data Acquisition
The R5F104LEAFA#30 can coordinate data acquisition in compact instrumentation with multiple analog inputs and digital controls. At 32 MHz, the 16-bit RL78/G14 processor can execute scaling, filtering, compensation, and protocol handling while retaining up to 64 KB of program memory. Its 64-LQFP package exposes the required interface signals without moving to a large fine-pitch package. Critical accuracy depends on reference-voltage stability, grounding, analog filtering, and acquisition timing, all of which should be verified against the complete manufacturer electrical specifications.
Inirekomenda
Consumer Equipment Controller
The R5F104LEAFA#30 can manage compact consumer equipment that needs deterministic embedded control, local flash storage, and a moderate number of mixed-signature I/O pins. The 32 MHz core supports responsive user-interface state management and peripheral coordination, and the 64-LQFP package is straightforward for conventional assembly. In a consumer product, verify the exact option's operating range, brownout behavior, flash endurance expectations, and production programming process. Firmware should also include safe outputs that remain in a defined state during reset or supply loss.
Inirekomenda
Impormasyon ng Talumpati sa Engineering for R5F104LEAFA#30 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | R5F104LEAFA#V0 | R5F104LJAFB#30 | R5F104LEAFB#30 | R5F104LJAFB#55 | R5F104LEAFA#55 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/G14 | RL78/G14 | RL78 | RL78/G14 | RL78 | RL78/G14 |
| CPU Architecture | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Package Dimensions | 12 mm x 12 mm | 12 mm x 12 mm | 12 mm x 12 mm | 12 mm x 12 mm | 12 mm x 12 mm | 12 mm x 12 mm |
Pangunahing mga Pagkakaiba
- Targeted RL78/G14 configuration for embedded control (kumpara saR5F104LJAFB#30)
- Established 64 KB flash configuration (kumpara saR5F104LEAFB#30)
- Industrial-temperature operating range (kumpara saR5F104LEAFA#55)
Talaan ng Disenyo
Design the supply rail to satisfy the exact electrical limits in the manufacturer datasheet, including input range, startup current, and peak current demanded by the 32 MHz operating mode. Place local bulk and high-frequency decoupling close to the MCU supply terminals, keep return-current paths short, and use separate filtering branches for analog or communication loads. Brownout behavior must be checked against the controlled outputs because a partial rail failure can otherwise leave external actuators in an unintended state.
Use the 64-LQFP manufacturer's land pattern and pin table without changing pad dimensions or pin numbering. Route the clock and sensitive analog inputs away from switching nodes and high-current motor-drive paths, and provide a quiet ground reference for measurement circuits. Although the 12 mm by 12 mm package is larger than a typical leadless MCU, pin escape angles are still limited; perform a footprint-aware placement review before finalizing placement, particularly around decoupling capacitors, programming-header access, and thermal copper.
Do not treat a shared RL78/G14 family label as proof that every ordering suffix is interchangeable. Before substituting an alternative, compare the complete pin description, peripheral allocation, RAM, flash organization, clock limits, temperature grade, and programming configuration. Also verify the reset, watchdog, and brownout behavior in firmware because these controls affect safe startup and recovery. A package photograph or distributor comparison table is not sufficient for production qualification.
Estimated: the MCU dissipation depends on supply voltage, clock activity, and the selected device's electrical characteristics, none of which permit a reliable numerical thermal calculation from the identified product summary alone. Use the datasheet current and voltage limits to calculate worst-case internal dissipation, then confirm junction-temperature margin with the package thermal data and PCB copper. Motor drivers and regulators should be evaluated separately because nearby heat sources can raise the ambient temperature seen by the MCU.
Impormasyon ng Pagsunod sa Kautusan
Compliance status requires confirmation from the manufacturer product documentation or declaration for the exact ordering code.