Silicon Laboratories

SI3066-B-FT Programmable Global Line-Side DAA | Silicon Labs

MPN: SI3066-B-FT ✗ जीवन की समाप्ति
Eliminates the need for a 2-wire or 4-wire hybrid Id 16-pin small outline package (16-SOP) Package
न्यूनतम ऑर्डर मात्रा: 1 |

SI3066-B-FT अवलोकन

Silicon Laboratories SI3066-B-FT is a programmable global line-side direct access arrangement (DAA) interface IC designed for processor-based telephone line-interface systems. It integrates a programmable line interface and digital access arrangement functions in a 16-pin small-outline package, replacing a conventional analog front end, isolation transformer, relays, opto-isolators, and 2-wire or 4-wire hybrid. The SI3066 can be configured for international PTT requirements, with documented support for FCC, JATE, and other country-specific specifications.

A direct access arrangement is the subscriber-line interface that converts between an analog telephone line and a digital processor or communications system. In the broader hierarchy, the SI3066 belongs to interface ICs and telecommunications line-interface ICs. Its integrated architecture reduces the number of external line-interface components while centralizing configuration in programmable control logic. This makes it especially relevant to Voice over Packet adapters, embedded voice gateways, central-office equipment, and other designs that need a compact global-market line interface.

The SI3066-B-FT provides programmable operation for international telephone-system requirements. The manufacturer datasheet describes compliance with FCC, JATE, and numerous country-specific PTT specifications. It also addresses demanding requirements for out-of-band energy, emissions, immunity, lightning surges, and safety. These capabilities distinguish it from a simple codec or line driver because the device manages a complete line-side interface rather than only digitizing or generating an audio signal.

The integrated DAA architecture removes several traditional analog front-end blocks, reducing board area and component count. Programmable operation allows one PCB design to target different country requirements, potentially simplifying product variants. The datasheet describes the family as eliminating the need for an analog front end, isolation transformer, relays, opto-isolators, and a 2-wire or 4-wire hybrid, which can simplify certification-oriented hardware development.

Typical uses include global Voice over Packet terminals, embedded telephone-line gateways, central-office line cards, and communications equipment connected directly to public-switched telephone-network lines. In these applications, the SI3066-B-FT can sit between a host processor and the physical subscriber line, while programmable configuration supports different national PTT requirements. The host processor must still handle higher-layer signaling, call control, and system management.

Design work should account for the line-side isolation, protection, surge immunity, and grounding requirements established by the applicable PTT specification. Use the manufacturer datasheet for the complete pin description, recommended external network, initialization sequence, and country-specific configuration tables. PCB routing should preserve the intended isolation boundary and place line-side protection close to the connector.

This product summary consolidates the device function, programming features, package information, drop-in alternatives, and practical line-interface design guidance. It also distinguishes documented capabilities from parameters that require confirmation in the latest manufacturer datasheet, helping engineers evaluate SI3066-B-FT for telecom, industrial communications, and embedded voice systems.

के लिए ड्रॉप-इन विकल्प SI3066-B-FT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SI3066-B-FT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mounting Type, Product Type.

Skyworks Solutions
Mounting Type: Standard
Product Type: Thermal circuit breaker interface IC
इसके साथ तुलना करें SI3066-B-FT →

SI3066-B-FSR

✅ ड्रॉप-इन
📦 16-pin SOIC
16 pins match the target's 16-pin footprint; device-specific temperature, lead-finish, and ordering details require comparison

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SI3066-B-FS

✅ ड्रॉप-इन
📦 16-pin SOIC
16 pins match the target's 16-pin footprint; temperature grade, lead finish, and exact ordering configuration require comparison

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SI3068-B-FSR

✅ ड्रॉप-इन
📦 16-pin SOIC
16 pins match the target's 16-pin footprint; SI3068-specific channel and feature ratings differ from SI3066

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SI3069-A-FT

✅ ड्रॉप-इन
Skyworks Solutions
📦 16-pin SOIC
Thermal circuit breaker interface IC · 25 A · 1 pole · 250 VAC · 50 VDC · 2 pins · Standard · Thermal

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SI3066-B-FT विशेषताएं

Product Type Programmable global line-side direct access arrangement (DAA) interface IC
Manufacturer Silicon Laboratories
पैकेज 16-pin small outline package (16-SOP)
माउंटिंग प्रकार Surface mount
Interface Function Integrated DAA with programmable telephone line interface
Programming Fully programmable for international PTT requirements
FCC Compliance Compliant
JATE Compliance Compliant
Country-Specific PTT Support Programmable for numerous country-specific PTT specifications
Out-of-Band Energy Meets the requirements described in the manufacturer datasheet
Emissions Meets the requirements described in the manufacturer datasheet
Immunity Meets the requirements described in the manufacturer datasheet
Lightning Surge Meets the requirements described in the manufacturer datasheet
Safety Meets the requirements described in the manufacturer datasheet
Analog Front End Eliminated by the integrated DAA architecture
Isolation Transformer Eliminated by the integrated DAA architecture
Relay and Opto-Isolator Components Eliminated by the integrated DAA architecture
Telephone Hybrid Eliminates the need for a 2-wire or 4-wire hybrid

SI3066-B-FT 16-pin small outline package (16-sop) पिन कॉन्फ़िगरेशन गाइड

SI3066-B-FT (16-pin small outline package (16-sop) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

SI3066-B-FT के लिए 16-pin small outline package (16-sop) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SI3066-B-FT.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SI3066-B-FT के लिए उपयुक्त है 6 अनुप्रयोगs: Voice over Packet Terminals, Embedded Telephone-Line Gateways, Central-Office Line Cards, Industrial Communication Terminals, Remote Monitoring and Control Systems, Legacy Fax and Data Equipment.

📞

Voice over Packet Terminals

The SI3066-B-FT fits Voice over Packet terminals that require a programmable physical telephone-line interface alongside a digital signal processor. Its integrated DAA and line interface eliminate several blocks traditionally associated with subscriber-line access, including a separate analog front end, isolation transformer, relays, opto-isolators, and telephone hybrid. Programmable operation supports deployment across FCC, JATE, and other country-specific PTT environments. The host processor handles packetization, call control, and application signaling, while the SI3066 manages the programmed line-side functions. Engineers should verify the recommended external network, isolation arrangement, line protection, and regional approval requirements before production release.

🌐

Embedded Telephone-Line Gateways

The SI3066-B-FT is suitable for embedded gateways that bridge a public telephone network to a digital processor or communications controller. Programmable country support is valuable in gateways intended for multiple markets because one hardware design can be configured for different PTT requirements. The integrated line-side DAA reduces board area by removing conventional analog front-end and hybrid components. Designers should reserve space for the manufacturer's recommended isolation transformer and protection network, because the SI3066 simplifies the active line interface but does not remove the need to satisfy applicable safety, surge, and isolation requirements.

🏢

Central-Office Line Cards

The SI3066-B-FT can support legacy line-card designs requiring a compact, programmable subscriber-line interface. Its 16-pin small-outline package preserves a familiar footprint while integrating the DAA and line-interface functions. The device is particularly relevant where a central-office product must support multiple national PTT profiles without redesigning the surrounding analog circuitry. Firmware or host configuration must select the required country profile, and hardware validation should cover line impedance, off-hook and on-hook behavior, out-of-band energy, emissions, immunity, lightning surges, and safety under the applicable specification.

🏭

Industrial Communication Terminals

The SI3066-B-FT can be used in industrial communication equipment that must connect legacy telephone lines to a controller, monitoring system, or remote-access platform. Its programmable DAA provides a compact interface and allows country-specific behavior to be selected during configuration. Industrial products should additionally verify temperature limits, conducted and radiated emissions, surge immunity, isolation voltage, and environmental requirements. Because the SI3066-B-FT is a legacy interface device, procurement continuity and availability should be confirmed before it is selected for a long-life industrial platform.

🧩

Remote Monitoring and Control Systems

The SI3066-B-FT can provide a physical line-side path in remote monitoring equipment that uses telephone infrastructure for alarms, telemetry, or control access. Its programmable DAA allows the equipment to adapt to different PTT profiles, while the integrated architecture reduces the number of discrete line-interface components. A practical design must use the manufacturer-recommended protection and isolation arrangement and validate ringing, line current, codec behavior, and regional network requirements. Host-side control can be implemented with a conventional microcontroller or communications processor, with the SI3066 handling the physical subscriber-line interface.

📠

Legacy Fax and Data Equipment

The SI3066-B-FT is applicable to legacy fax, modem, and data equipment that must connect to analog telephone lines while relying on a digital host processor. The integrated DAA provides a programmable line interface for international equipment configurations and can simplify a design that previously required a separate analog front end and telephone hybrid. The complete design must still include the appropriate isolation and protection network and must be tested for the intended signaling standard and operating region. For new product development, check lifecycle availability early and retain a qualified alternate SI306x candidate when the original ordering configuration becomes difficult to source.

What is the SI3066-B-FT?
The SI3066-B-FT is a programmable global line-side direct access arrangement interface IC from Silicon Laboratories. According to the manufacturer datasheet, the device integrates a DAA and programmable line interface for global telephone-line requirements. It is packaged as a 16-pin small-outline device and replaces a discrete analog front end, isolation transformer, relays, opto-isolators, and a 2-wire or 4-wire hybrid.
What does SI3066-B-FT do in a telephone interface?
The SI3066-B-FT provides the physical subscriber-line interface between a telephone line and a host processor. The manufacturer describes it as an integrated DAA with a programmable line interface intended for global telephone equipment. Its programmed configuration can address country-specific PTT requirements, including FCC and JATE requirements, while integrated line-side functions reduce the external component count.
Where can I download the SI3066-B-FT datasheet PDF?
The SI3066-B-FT datasheet PDF is available through the manufacturer datasheet link listed on this page. The document describes the Si306x family as a programmable integrated DAA supporting international PTT requirements. Use the pin-description table, external-network diagram, initialization sequence, and country-configuration sections when creating a new subscriber-line design.
Where can I find the SI3066-B-FT pinout?
The SI3066-B-FT pin assignments are documented in the manufacturer datasheet rather than reproduced on this page. The device uses a 16-pin small-outline package, but pin names, exposed-pad details, and alternate functions should be taken directly from the pin-description table before assigning PCB tracks or connecting line-side circuitry. The package drawing identifies the physical orientation used for the diagram.
Is the SI3066-B-FT suitable for Voice over Packet equipment?
The SI3066-B-FT is suitable for Voice over Packet and other processor-based telephone-line equipment. Its integrated DAA and programmable global line interface connect a physical subscriber line to a host processor, while the manufacturer identifies FCC, JATE, and numerous country-specific PTT configurations. Final approval depends on the complete telephone interface, isolation system, protection network, and regional certification requirements.
What is the best drop-in replacement for SI3066-B-FT?
The closest documented drop-in candidates are the 16-pin SI3066-B-FSR, SI3066-B-FS, SI3068-B-FSR, and SI3069-A-FT variants. Before replacing the SI3066-B-FT, verify the exact pinout, supply limits, temperature grade, programming model, regional PTT configuration, and required external network. No cross-brand drop-in replacement was established from the available cross-reference results.
Can SI3066-B-FS replace SI3066-B-FT?
SI3066-B-FS is a documented SI3066-family alternative with the same 16-pin small-outline format and closely related line-interface function. It may serve as a drop-in candidate, but replacement approval requires checking the manufacturer ordering information for temperature grade, lead finish, programming, and certification differences. Treat the part as a candidate rather than an unconditional substitute until those items match.
What can replace SI3066-B-FT in a global line-side design?
The available replacements are concentrated within the Silicon Laboratories Si306x product family. SI3066-B-FSR, SI3066-B-FS, SI3068-B-FSR, and SI3069-A-FT can be evaluated as 16-pin drop-in candidates. Their exact suitability depends on pin compatibility, channel configuration, operating limits, temperature grade, and national PTT requirements. No verified cross-brand equivalent was found.
What is the difference between SI3066-B-FT and SI3068-B-FSR?
Both devices belong to the programmable Si306x integrated-DAA family and are documented in 16-pin small-outline packages. The SI3066 is specified for the SI3066-B configuration, while the SI3068 is a different family member whose device-specific capabilities must be checked separately. Pin assignment, interface configuration, temperature grade, and certification requirements must be compared before treating SI3068-B-FSR as a replacement.
SI3066-B-FT vs SI3069-A-FT — which is better for a new design?
SI3066-B-FT is the appropriate choice when the design specifically calls for the SI3066-B global line-side DAA configuration. SI3069-A-FT is a related Si3069 family device rather than an identical SI3066-B replacement. For a new design, choose based on the required line-interface features, pinout, programming, regional PTT approval, and availability rather than assuming that the shared package guarantees functional equivalence.
When should I choose SI3066-B-FT over another Si306x device?
Choose SI3066-B-FT when the system has been designed around the SI3066-B line interface and requires its programmable global DAA behavior. Select another Si306x variant only when that variant provides a required channel, protocol, regional, temperature, or interface capability while retaining an identical pin arrangement. The manufacturer ordering table and datasheet are the controlling references for feature selection.
Is SI3066-B-FT suitable for industrial and telecom equipment?
The SI3066-B-FT is intended for telephone-line interface equipment and can be used in industrial communications, embedded voice gateways, Voice over Packet terminals, and central-office line cards. Its programmability supports international PTT configurations, but industrial equipment often adds safety, EMC, environmental, and isolation requirements that must be verified at the complete-product level.
Where can I buy SI3066-B-FT and what is the current lead time?
Use the Request a Quote form on this page to request the current SI3066-B-FT price, stock position, minimum order quantity, and lead time. The part is associated with legacy Silicon Laboratories telephone-interface technology and may have limited new-production availability. Firm sourcing terms should be confirmed before committing a new production design.
How much does SI3066-B-FT cost?
Use the Request a Quote form on this page for the current SI3066-B-FT unit price and quantity-break availability. Because this is a legacy line-side DAA, market availability can be limited and may vary by package, temperature grade, and required quantity. The quote form is the appropriate route for current commercial terms rather than relying on an old catalog figure.
What are the key specifications of SI3066-B-FT that engineers should know?
The SI3066-B-FT is a programmable global line-side DAA in a 16-pin small-outline package. Its defining features include integrated line-interface functionality, programmable support for FCC, JATE, and other country-specific PTT requirements, and elimination of a conventional analog front end, isolation transformer, relays, opto-isolators, and 2-wire or 4-wire hybrid. Electrical limits and timing values should be taken from the manufacturer datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा SI3066-B-FT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SI3066-B-FT when the product is specifically designed around the SI3066-B global line-side DAA and requires programmable support for multiple country-specific PTT requirements. Prefer SI3066-B-FSR or SI3066-B-FS when their ordering, temperature, lead-finish, and certification details match the original design and they improve procurement continuity. Evaluate SI3068-B-FSR or SI3069-A-FT only when their device-specific line-interface features are functionally sufficient and their pin assignments have been checked against the target board. No verified cross-brand drop-in equivalent was established, so a new PCB should not assume that an unrelated telephone-interface IC can replace the SI3066-B-FT. For any substitution, confirm operating limits, programming, external network, isolation, regional approval, and lifecycle availability before releasing production artwork.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SI3066-B-FSR SI3066-B-FS SI3068-B-FSR SI3069-A-FT
Package 16-pin small outline package 16-pin small outline package 16-pin small outline package 16-pin small outline package 16-pin small outline package
Brand Silicon Laboratories Silicon Laboratories Silicon Laboratories Silicon Laboratories Silicon Laboratories
Product Family SI3066-B programmable global line-side DAA SI3066-B family SI3066-B family SI3068-B family SI3069-A family
Pin Count 16 pins 16 pins 16 pins 16 pins 16 pins

मुख्य विशेषताएँ

  • Highly integrated global line-side DAA (बनामSI3068-B-FSR)
  • Country-specific PTT programmability (बनामSI3069-A-FT)
  • Reduction of conventional subscriber-line components (बनामSI3066-B-FS)

डिज़ाइन नोट्स

Place the SI3066-B-FT and its decoupling components close to the host processor and line-interface circuitry while preserving the isolation boundary required by the applicable PTT specification. Route subscriber-line and high-voltage transient paths separately from low-level processor signals. Do not rely on package similarity alone for layout approval: compare the complete reference circuit and pin-description table for the exact ordering suffix selected.

Do not assume that every SI3066 or SI306x suffix is an unconditional substitute. Verify pin names, temperature grade, lead finish, programming interface, regional PTT configuration, and required external network before substitution. A shared 16-pin footprint establishes mechanical compatibility only; functional approval also requires equivalent line-side behavior and satisfactory immunity, emissions, surge, and safety testing.

Implement the power rails and decoupling network specified in the manufacturer application information, including separate treatment of analog and digital supply paths where recommended. Check startup, shutdown, and programming states against the host system's power sequence. Because operating-voltage and current limits are not stated in the available product listing, use the manufacturer datasheet rather than applying a generic line-interface supply limit.

Validate conducted and radiated emissions with the final line-network hardware, enclosure, cable, and grounding configuration. The SI3066-B-FT is designed for country-specific PTT requirements, including out-of-band energy, emissions, immunity, lightning-surge, and safety criteria, but component-level capability does not guarantee compliance of every implementation. Repeat testing after changing the isolation transformer, protection network, PCB stack-up, or external wiring.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer datasheet identifies FCC, JATE, and numerous country-specific PTT compliance capabilities, including out-of-band energy, emissions, immunity, lightning-surge, and safety requirements. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the available product information.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SI3066-B-FT datasheet SI3066-B-FT datasheet pdf SI3066-B-FT pinout SI3066-B-FT equivalent SI3066-B-FT replacement SI3066-B-FT cross reference SI3066-B-FT vs SI3066-B-FSR SI3066-B-FT footprint SI3066-B-FT price SI3066-B-FT stock Silicon Laboratories SI3066-B-FT SI3066-B-FT global line-side DAA SI3066-B-FT telephone interface IC What can replace SI3066-B-FT? Where to download SI3066-B-FT pinout?

संबंधित कंपोनेंट्स और शब्द

Silicon Laboratories SI3066-B-FT SI3066-B-FSR SI3066-B-FS SI3068-B-FSR SI3069-A-FT direct access arrangement DAA programmable line interface telephone line interface integrated interface IC analog front end AFE isolation transformer opto-isolator 2-wire hybrid 4-wire hybrid FCC JATE PTT Voice over Packet 16-pin small outline package central-office line card out-of-band energy lightning surge immunity
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें