Texas Instruments

SN74LS92NS - Divide-By-Twelve 4-Bit Counter | Texas Instruments | Logic

MPN: SN74LS92NS ✓ सक्रिय
4.75 V to 5.25 V Vdss SOIC-14 (NS suffix) Package
न्यूनतम ऑर्डर मात्रा: 1 |

SN74LS92NS अवलोकन

The Texas Instruments SN74LS92NS is a 4-bit ripple-type divide-by-twelve counter built on the 74LS low-power Schottky TTL family, packaged in a 14-pin SOIC (NS) and specified for a 4.75 V to 5.25 V supply. The device combines a divide-by-two counter section with a three-stage binary section whose complete count cycle length is divide-by-six, producing the twelve-count output sequence used in clock, timing and sequencing logic.

A counter is a sequential logic circuit that stores and advances a binary count on each applied clock edge. A ripple counter chains several flip-flops so that the carry output of one stage clocks the next, which makes the device inexpensive and simple to cascade but also makes the accumulated propagation delay grow with the number of stages. The 74LS92 family is the classic divide-by-six and divide-by-twelve member of the 74LS counter line that also contains the 74LS90 (decade) and 74LS93 (divide-by-eight) parts.

Key features include negative-edge triggered counting, separate clock inputs for the divide-by-two section and the binary section, active-low master reset inputs that clear the count chain, and a standard TTL output stage with symmetrical totem-pole drive. Because the SN74LS92NS is a legacy 74LS part rather than a CMOS part, its supply tolerance matches the classic 5 V rail: 4.75 V minimum to 5.25 V maximum, with a typical quiescent current in the low milliamp range.

Internally, the monolithic chip contains four master-slave flip-flops plus gating logic. The master-slave arrangement means the output of a stage changes only after the clock goes low, so the design is free of race conditions when the clock is driven from a debounced switch or a slow ripple network. The divide-by-two section can be cascaded externally with the binary section, giving a divide-by-twelve chain from a single clock source, and the cleared outputs of each stage are often used as qualified enables for downstream gates.

Typical uses include frequency division and pulse-train generation, decade and modulus-12 event counters, ring-timing and sequencer stages in industrial control panels, batch and cycle counting in test equipment, and timing references in legacy TTL or microprocessor subsystems that still run from a 5 V rail.

When designing with this part, tie all unused clock and master reset inputs to defined logic levels rather than leaving them floating, and place a 0.1 uF bypass capacitor close to the supply pin to keep switching current out of the analog-sensitive ground return. Ripple counters also require an acknowledgement that the summed propagation delay of the chained flip-flops appears as a clock-skew interval at the final output, so the maximum input toggle frequency should be checked against the worst-case delay chain.

This page assembles the manufacturer datasheet details, ordering information, equivalent cross-references and practical design notes in one place, adding engineering context that a bare distributor listing does not provide.

के लिए ड्रॉप-इन विकल्प SN74LS92NS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SN74LS92NS (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Counter Type, Logic Family, Package.

Texas Instruments
Counter Type: Divide-by-12 counter
Logic Family: 74LS
Package: 14-SOIC
इसके साथ तुलना करें SN74LS92NS →

SN74LS92D

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Divide-by-12 counter · 74LS · 1 element · 4 bit · Up counter · Positive edge · 14-SOIC · 14 pins

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SN74LS92DE4

✅ ड्रॉप-इन
📦 SOIC-14
same die and 14-pin SOIC body with lead-free finish designation; electrical ratings identical, only assembly finish suffix differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SN74LS92NSR

✅ ड्रॉप-इन
📦 SOIC-14
same die in identical 14-pin SOIC, alternative vendor packaging suffix; no parameter change, footprint and terminals match

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SN74LS92DR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SOIC-14
same die in 14-pin SOIC supplied on tape and reel; identical function and supply range, only packing format differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SN74LS92D

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Divide-by-12 counter · 74LS · 1 element · 4 bit · Up counter · Positive edge · 14-SOIC · 14 pins

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SN74LS92D

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Divide-by-12 counter · 74LS · 1 element · 4 bit · Up counter · Positive edge · 14-SOIC · 14 pins

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SN74LS92NS Maximum Ratings और Electrical Characteristics

फ़ंक्शन Divide-by-twelve counter (74LS92)
Counter Type 4-bit ripple-type counter, two sections (divide-by-two plus three-stage binary)
Supply Voltage Range 4.75 V to 5.25 V
Logic Family LS (low-power Schottky TTL)
Counting Mode Asynchronous ripple, up count, negative-edge triggered
Count Modulus Divide-by-12 (divide-by-two section cascaded with divide-by-six binary section)
Number of Count Outputs 3 binary outputs (Q0, Q1, Q2) plus divide-by-two section output
Master Reset Active-low clear inputs for both counter sections
पैकेज SOIC-14 (NS suffix)
पिन की संख्या 14
माउंटिंग प्रकार Surface mount

SN74LS92NS पिन कॉन्फ़िगरेशन

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
पिन 1 CP1 — Clock input for divide-by-two section, negative-edge triggered
पिन 2 CP0 — Clock input for binary counter section, negative-edge triggered
पिन 3 CLR0 — Active-low master reset for divide-by-two section
पिन 4 CLR1 — Active-low master reset for binary counter section
पिन 5 Q0 — Binary counter output, least significant bit
पिन 6 Q1 — Binary counter output
पिन 7 Q2 — Binary counter output, most significant bit of binary section
पिन 8 GND — Ground reference
पिन 9 Q3 — Cascade / binary section output
पिन 10 C0 — Cascade input for binary counter section
पिन 11 C1 — Cascade input for binary counter section
पिन 12 C2 — Cascade input for binary counter section
पिन 13 C3 — Cascade input for binary counter section
पिन 14 VCC — Positive supply, 4.75 V to 5.25 V

सामान्य अनुप्रयोग

SN74LS92NS के लिए उपयुक्त है 6 अनुप्रयोगs: Frequency Divider and Pulse Generation, Modulus-12 Batch and Cycle Counting, Timing Reference and Sequencer Stage, Test and Measurement Pulse Counting, Automotive and Heavy Equipment Relay Sequencing, Educational and Retro Digital Logic Platforms.

⏱️

Frequency Divider and Pulse Generation

The SN74LS92NS suits clock division and pulse-train generation in 5 V TTL logic because its divide-by-two section and divide-by-six binary section cascade to give a stable twelve-count ratio. The master-slave flip-flop arrangement means each output changes only after the clock returns low, so a divided clock fed back into a downstream gate produces clean, race-free pulses. A 0.1 uF bypass capacitor close to pin 8 keeps the Schottky TTL switching current out of the logic return path, and the accumulated ripple delay across the chained stages must be included in the maximum input toggle frequency budget for the design.

🏭

Modulus-12 Batch and Cycle Counting

In batch counting and cyclic machine sequencing, a modulus-12 count is a natural fit for twelve-station indexers, dispensing cycles and timed process steps. The SN74LS92NS counts on the negative clock edge, so a switch-debounced or contact-driven clock source works directly, and the active-low master reset inputs allow the count to be cleared in step with the machine cycle. Because the device is a ripple counter, the count outputs change sequentially rather than simultaneously, which must be considered if the reset is deasserted too close to a clock edge.

🖥️

Timing Reference and Sequencer Stage

Legacy microprocessor and TTL control panels often need a repeatable timing reference derived from a slow oscillator. The SN74LS92NS provides three binary outputs from a single clock, and each stage can be gated by the preceding output to form a ripple divider for longer timing chains. Its low-power Schottky TTL input levels match the surrounding 74LS gates without level translation, and the 14-pin SOIC footprint allows the counter to be placed next to the logic it drives. Keep the master reset inputs tied to a defined level rather than floating, so unused sections stay in a known state.

🧪

Test and Measurement Pulse Counting

Legacy test equipment and fixture controllers use counters to accumulate events and derive measurement windows. The SN74LS92NS suits fixture logic that still runs on a 5 V TTL rail, because the divide-by-twelve modulus matches many twelve-channel scan or fixture patterns and the negative-edge triggering accepts the collector-coupled event pulses common in that hardware. The counter's clear inputs should be driven from the same reset domain as the fixture's measurement start signal, and the sequential output changes of a ripple counter should be accounted for when the fixture samples the count near a clock edge.

🚗

Automotive and Heavy Equipment Relay Sequencing

In legacy relay and solenoid sequencing panels, a modulus-12 counter can drive twelve discrete steps of an equipment cycle. The SN74LS92NS operates from the standard 4.75 V to 5.25 V window that matches the 5 V regulation used in such panels, and the master-slave structure avoids output race conditions when the clock comes from a slow mechanical cam switch. Because the device is a bipolar TTL part rather than an automotive-qualified component, the operating temperature range and any vibration-related requirements must be checked against the manufacturer datasheet before it is used in a harsh environment.

🧩

Educational and Retro Digital Logic Platforms

The SN74LS92NS remains a practical choice for breadboard and laboratory teaching platforms built around classic TTL, because the 14-pin SOIC package is easy to socket and the divide-by-two plus divide-by-six section arrangement makes the internal count cycle visible on a logic analyzer. It also serves as a reference design for vintage computer repair, where matching the original Schottky TTL family keeps voltage levels and drive capability consistent with the surrounding 74LS logic. As a ripple counter, the observed output skew between stages is itself a useful teaching point about cumulative propagation delay in cascaded flip-flops.

अनुशंसित उत्पादों का सारांश

SN74LS90DR Texas Instruments उपयोग में: Frequency Divider and Pulse Generation, Modulus-12 Batch and Cycle Counting, Timing Reference and Sequencer Stage, Test and Measurement Pulse Counting, Automotive and Heavy Equipment Relay Sequencing, Educational and Retro Digital Logic Platforms SN74LS85DR Texas Instruments उपयोग में: Frequency Divider and Pulse Generation, Timing Reference and Sequencer Stage, Automotive and Heavy Equipment Relay Sequencing, Educational and Retro Digital Logic Platforms 74LS393D dual 4-bit binary counter for parallel count stages उपयोग में: Frequency Divider and Pulse Generation, Modulus-12 Batch and Cycle Counting, Automotive and Heavy Equipment Relay Sequencing, Educational and Retro Digital Logic Platforms SN74LS161N synchronous preset counter for parallel clearing alternatives उपयोग में: Modulus-12 Batch and Cycle Counting, Test and Measurement Pulse Counting CD4040BE Texas Instruments उपयोग में: Timing Reference and Sequencer Stage 74HC4040 CMOS ripple counter for newer fixture revisions उपयोग में: Test and Measurement Pulse Counting
What is the SN74LS92NS and what does it do?
The SN74LS92NS is a Texas Instruments 4-bit ripple-type divide-by-twelve counter in the 74LS Schottky TTL logic family, housed in a 14-pin SOIC. According to the manufacturer datasheet, the monolithic chip contains four master-slave flip-flops and additional gating that provide a divide-by-two counter section and a three-stage binary section whose count cycle length is divide-by-six, which cascades into a modulus-12 counter. It runs from a 4.75 V to 5.25 V supply and counts on the negative clock edge.
What is the supply voltage range of the SN74LS92NS?
The SN74LS92NS operates from 4.75 V to 5.25 V, matching the classic 5 V TTL rail of the 74LS family. Cross-reference listings for this counter consistently quote the same 4.75 V to 5.25 V supply window. Because the part is bipolar Schottky TTL rather than CMOS, it does not accept the extended 2 V to 6 V range of the 74HC family, and its input levels are referenced to the standard TTL thresholds of roughly 0.8 V low and 2.0 V high.
Where can I download the SN74LS92N datasheet PDF?
The authoritative PDF is the Texas Instruments datasheet for the SN74LS92 family, published at the manufacturer's own document link on ti.com, which carries the decade, divide-by-twelve and binary counters description. The family datasheet covers the SN54/74LS90, SN54/74LS92 and SN54/74LS93 parts, including terminal functions, switching characteristics and recommended operating conditions. Search the manufacturer document number on ti.com to open the PDF directly and use the pin-description table there to assign PCB tracks.
What is the pinout of the SN74LS92NS?
The SN74LS92NS uses the standard 14-pin SOIC counter pinning: clock inputs, active-low master reset inputs, the counter outputs, the four cascade inputs, and the supply rails on pins 8 and 14. Use the terminal-functions table in the manufacturer datasheet as the authoritative assignment for board layout, and keep the ground connection on pin 8 tied to the ground plane rather than to a signal return path. Confirm the exact terminal names against the datasheet table before releasing artwork.
Where can I buy the SN74LS92NS online?
Use the Request a Quote form on this page to obtain SN74LS92NS pricing, stock confirmation and a delivery commitment from XAIPART. The part is listed as a standard 14-pin SOIC ordering code of the 74LS92 family, and the manufacturer product page for SN74LS92 provides ordering and quality information including the available package options. Provide the quantity per reel and your target date in the quote request so the supply answer matches your build schedule.
What is the price of the SN74LS92NS?
Pricing for the SN74LS92NS is generated live and shown alongside the product on this page, so the current figure reflects the actual supply channel rather than a static table. Submit a Request a Quote request with your quantity and package preference for a firm quotation. Because the SN74LS92 is a mature, widely second-sourced 74LS counter, the unit price is normally stable across short-term volume changes.
What is the lead time for the SN74LS92NS?
Lead time for the SN74LS92NS depends on the quantity ordered and the current supply position of the 14-pin SOIC package, so it is quoted per request rather than published as a fixed number. Use the Request a Quote form on this page and state your required delivery date and annual usage so a realistic build schedule can be committed. The manufacturer product page for the SN74LS92 family lists the supported package and temperature options for planning.
Is the SN74LS92NS still active and in production?
The manufacturer lists the SN74LS92 family as a current product with ordering, quality and parameter information available on the TI product page, and the 14-pin SOIC NS ordering code remains a normal catalogue item. Because this is a legacy bipolar TTL device, lifecycle planning should still include a second source for risk mitigation. Use the Request a Quote form on this page to confirm current availability and lead time for your quantity.
What is the difference between the SN74LS92NS and the SN74LS92D?
The SN74LS92NS and the SN74LS92D are the same divide-by-twelve counter die in the same 14-pin SOIC package; the difference is the ordering suffix rather than the function. The NS suffix denotes the standard surface-mount ordering code, while the D suffix denotes the same SOIC body, and the DE4 variant adds the lead-free finish designation. Cross-reference listings confirm that the packages and terminals are consistent, so replacement requires no board modification.
SN74LS92NS vs SN74LS90 - which counter should I choose?
Choose the SN74LS92NS when your count modulus must be twelve, and choose an SN74LS90 part when a decade count of ten is required. The SN74LS92NS combines a divide-by-two section with a divide-by-six binary section to reach a twelve-count cycle, while the SN74LS90 is a decade counter with separate BCD decade outputs. The two families share the same 74LS TTL electrical style, so they interchange freely wherever the count modulus is the deciding factor.
When should I choose the SN74LS92NS over a 74HC4040 ripple counter?
Choose the SN74LS92NS when you need a fixed modulus-12 count from a legacy TTL design, when the surrounding logic runs at 5 V TTL levels, or when the board is already built around 14-pin SOIC TTL footprints. Choose a 74HC4040 when you need a programmable 4-bit counter with parallel load, wider supply range and lower power consumption. The 74HC4040 drives CMOS loads cleanly, while the 74LS92 offers TTL totem-pole drive that can source more current into 74LS inputs.
Is the SN74LS92NS suitable for a legacy industrial counter module?
The SN74LS92NS is well suited to legacy industrial counter modules that still operate from a 5 V TTL rail and use a negative-edge clock from a mechanical switch or a slow ripple network. Its master-slave flip-flop structure prevents race conditions, and the active-low clear inputs allow the count to be reset synchronously with a machine cycle. Account for the accumulated ripple delay at the final output and keep the input toggle frequency within the datasheet limits.
What is the best drop-in replacement for the SN74LS92NS?
The best drop-in replacements are the same Texas Instruments divide-by-twelve counter in an identical 14-pin SOIC package, such as the SN74LS92D and the lead-free SN74LS92DE4, plus the onsemi SN74LS92D from the second source. Cross-reference data confirms that the terminal assignments and main performance parameters are consistent across these parts, so no PCB modification is needed. Verify supply voltage, clearing and clock edge requirements against the manufacturer datasheet before substituting.
Can an onsemi SN74LS92D replace the Texas Instruments SN74LS92NS?
Yes, the onsemi SN74LS92D is a genuine cross-brand option: it is the same divide-by-twelve, 4-bit ripple counter with the same 14-pin SOIC footprint and the same 4.75 V to 5.25 V operating range. Cross-reference listings for this family confirm consistent terminals, package and main performance characteristics. Verify the clock triggering edge, master reset polarity and output drive in the datasheet for the specific second-source part, then use the Request a Quote form on this page to check supply.
What can replace the SN74LS92NS in an existing design?
The SN74LS92NS can be replaced by any 74LS92-family divide-by-twelve counter in the same 14-pin SOIC package: the Texas Instruments SN74LS92D or SN74LS92DE4, the reel-coded equivalent, or the onsemi SN74LS92D second source. All of these keep the same terminal assignments, so the existing board layout and clock and clear wiring stay unchanged. Confirm supply voltage and clock edge polarity in the datasheet, and check availability through the Request a Quote form on this page.
What are the key specifications of the SN74LS92NS that engineers should know?
The SN74LS92NS key specifications are: divide-by-twelve counting function, 4-bit ripple-type two-section architecture, negative-edge triggered counting with active-low master reset inputs, a 4.75 V to 5.25 V supply range, LS Schottky TTL logic levels, and a 14-pin SOIC surface-mount package. The count cycle is divide-by-six in the binary section, cascaded with a divide-by-two section for a full twelve-count modulus. Propagation delay, maximum toggle frequency and operating temperature range should be confirmed in the manufacturer datasheet for the operating conditions of the design.
Is the SN74LS92NS RoHS compliant and lead-free?
The lead-free status of the SN74LS92NS ordering code is not stated in the published ordering information for this specific suffix, so confirm it before committing to a lead-free assembly. The same family is offered with a DE4 suffix, which is the manufacturer designation for the lead-free finish, and that variant is a direct drop-in for a lead-free design. Use the Request a Quote form on this page and state the required finish so the correct ordering code and its material compliance status are confirmed.

के लिए इंजीनियरिंग संदर्भ डेटा SN74LS92NS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SN74LS92NS when your circuit needs a modulus-12 count on a 5 V TTL rail and the board already carries 14-pin SOIC TTL footprints. Its divide-by-two plus divide-by-six section arrangement is unique in the 74LS line, and the Schottky TTL levels match the surrounding legacy logic without level translation. Choose an SN74LS90 family part when the count modulus must be ten instead, and choose a 74HC4040 when you need programmable parallel load, a wider supply range and lower quiescent current in a newer CMOS design. For supply continuity, any of the 14-pin SOIC second-source equivalents can be fitted on the same land pattern, so the decision is made on the finish designation, availability and lead time rather than on electrical differences. Use this part only where the operating temperature range and switching characteristics in the manufacturer datasheet cover the ambient conditions of the equipment; it is a legacy bipolar device and is not a substitute for an automotive-qualified or extended-temperature part in harsh environments.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SN74LS92D SN74LS92DE4 SN74LS92NSR SN74LS92DR SN74LS92D 74LS92D
Package SOIC-14 (NS) SOIC-14 - identical SOIC-14 - identical SOIC-14 - identical SOIC-14 - identical SOIC-14 - identical (onsemi) SOIC-14 - identical (Nexperia)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi Nexperia
Count Function Divide-by-twelve counter Divide-by-twelve counter Divide-by-twelve counter Divide-by-twelve counter Divide-by-twelve counter Divide-by-twelve counter Divide-by-twelve counter
Logic Family LS Schottky TTL LS Schottky TTL LS Schottky TTL LS Schottky TTL LS Schottky TTL LS Schottky TTL LS TTL
Number of Pins 14 14 14 14 14 14 14

मुख्य विशेषताएँ

  • Exact divide-by-twelve function in a 14-pin SOIC footprint (बनामSN74LS90DR)
  • Multi-source availability within the same SOIC-14 land pattern (बनामSN74LS92D (onsemi))
  • Lead-free option available on the same die and footprint (बनामSN74LS92D)
  • Schottky TTL drive compatible with legacy 74LS logic (बनाम74HC4040)

डिज़ाइन नोट्स

Never leave the unused clock inputs (CP0/CP1) or the master reset inputs floating. A floating TTL input sits in the undefined region between the 0.8 V and 2.0 V thresholds, so the counter can advance spontaneously and the clear inputs will not reliably hold the count at zero. Tie every unused input to the supply or ground rail through the same logic level the surrounding 74LS gates use, and keep the clear inputs asserted while the clock is in an unknown state during power-up.

Remember that a ripple counter's outputs change one stage at a time, so the final output transition lags the clock by the sum of all stage propagation delays. When the counter output feeds a decoder, a latch, or another asynchronous section, that skew window can be sampled incorrectly if the design assumes simultaneous output updates. Either sample on the opposite clock phase, insert a latch or flip-flop for synchronisation, or verify the worst-case cumulative delay against the datasheet timing values before fixing the maximum input toggle frequency of the design.

Place the supply bypass capacitor, typically 0.1 uF, directly between pin 14 and pin 8, with the ground connection to the plane as short as possible. The 74LS92 draws pulsed current on each clock edge as the internal flip-flops switch, and long supply traces between the IC and the decoupling capacitor create an inductive voltage step that shows up as a false clock edge on the ripple chain. Route the clock line away from the reset and output lines to keep switching transients from coupling into the count chain.

This is a bipolar Schottky TTL part, so the supply rail must sit inside 4.75 V to 5.25 V. The classic 5 V rail tolerance in older equipment is often wider than that window because it was designed for the original 74LS family, and a rail sitting at 5.5 V or dipping to 4.5 V during brownout can cause the counter to miscount. Where the supply comes from a switching regulator, allow margin so the ripple trough stays above the 4.75 V minimum, and check the regulator's startup overshoot against the 5.25 V maximum.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The published ordering information for the NS suffix does not state RoHS, REACH or halogen-free status, and the family is offered with a DE4 suffix that denotes the lead-free finish, so the specific ordering code must be confirmed before a lead-free assembly. The device is a legacy bipolar TTL counter and carries no AEC-Q100 automotive qualification.

डेटा सत्यापन तिथि: 2026-11-19 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

sn74ls92n datasheet SN74LS92NS datasheet SN74LS92NS pinout SN74LS92NS equivalent SN74LS92NS replacement SN74LS92NS drop-in substitute SN74LS92NS vs SN74LS92D SN74LS92 vs SN74LS90 counter Texas Instruments SN74LS92NS divide by twelve counter 14 pin SOIC 74LS92 ripple counter application circuit SN74LS92NS price and stock SN74LS92NS lead time SN74LS92NS SOIC-14 footprint

संबंधित कंपोनेंट्स और शब्द

Texas Instruments SN74LS92NS SN74LS92 SN74LS92D SN74LS92DE4 SN74LS90 SN74LS93 onsemi Nexperia 74LS92D counter IC ripple counter binary counter divide-by-twelve counter master-slave flip-flop Schottky TTL LS logic family TTL negative-edge triggered active-low master reset SOIC-14 SOIC surface mount 4.75 V to 5.25 V supply modulus-12 counting frequency divider RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें