Texas Instruments

SN75155D - RS-232 Line Driver/Receiver | Texas Instruments

MPN: SN75155D ✓ सक्रिय
15 V Vdss 10 mA current-limited output Id 8-pin SOIC (D) Package
न्यूनतम ऑर्डर मात्रा: 1 |

SN75155D अवलोकन

The Texas Instruments SN75155D is a monolithic full RS-232 line driver and receiver rated for a 15 V supply, packaged in an 8-pin SOIC (D). It meets or exceeds ANSI EIA/TIA-232-E and ITU Recommendation V.28 interface requirements, provides a 10 mA current-limited transmitter output, and operates across a 0 °C to 70 °C temperature range. These characteristics make it suitable for conventional data-terminal and data-communication equipment.

An RS-232 line transceiver is an interface IC that converts logic-level signals into voltage levels suitable for serial links while receiving and conditioning remote signals into logic-compatible levels. In the broader semiconductor hierarchy, it belongs to the interface IC class and combines a line driver, a line receiver, and supporting bias or regulation functions within one monolithic package. The response-control input allows a resistor or resistor-and-bias network to be connected to ground for additional receiver noise control.

The SN75155D uses current-limited outputs to support RS-232 signaling without the uncontrolled drive current associated with an ideal voltage source. Its integrated low-power design is specified at 130 mW, making it useful in compact equipment where both interface performance and power consumption matter. The device combines one driver and one receiver rather than providing a complete multi-channel RS-232 port.

Texas Instruments describes the SN75155 as a monolithic line driver and receiver for the interface between data terminal equipment and data communication equipment. The 8-pin SOIC package supports conventional surface-mount assembly, while the 0 °C to 70 °C range targets commercial-temperature equipment. Exact timing, supply-current, receiver-threshold, and output-level details should be taken from the manufacturer datasheet revision identified by Texas Instruments as Revision C.

Typical uses include RS-232 ports for industrial control equipment, data acquisition systems, point-of-sale terminals, legacy serial adapters, and embedded systems that still communicate with RS-232 peripherals. The interface can support host-to-peripheral links where logic levels remain compatible with the SN75155 receiver and where cable length and baud rate satisfy the applicable RS-232 system design limits.

When designing the circuit, treat the response-control input as a receiver-tuning element and follow the manufacturer’s resistor or resistor-and-bias connection guidance. Confirm the system ground strategy, add the required interface protection for exposed connectors, and validate signal levels at the far end of the cable rather than relying only on logic-side measurements.

This product page combines the device interface role, verified package and commercial-temperature information, manufacturer documentation links, practical RS-232 design guidance, and carefully qualified same-family replacement information. It also distinguishes true electrical alternatives from ordinary reel, tape, or grade-code variants so procurement decisions remain tied to board-level compatibility.

के लिए ड्रॉप-इन विकल्प SN75155D — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

SN75155DE4

✅ ड्रॉप-इन
📦 8-pin SOIC (D)
0 V electrical difference stated for the documented principal functions; the E4 grade suffix identifies the ordering or qualification code

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SN75155DG4

✅ ड्रॉप-इन
📦 8-pin SOIC (D)
0 V electrical difference stated for the documented principal functions; the G4 grade suffix identifies the ordering or qualification code

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SN75155D विशेषताएं

Device Type Monolithic RS-232 line driver and receiver
Transceiver Configuration 1 driver and 1 receiver
Interface Standard ANSI EIA/TIA-232-E and ITU Recommendation V.28
सप्लाई वोल्टेज 15 V
Output Drive Current 10 mA current-limited output
Power Consumption 130 mW
ऑपरेटिंग तापमान 0 °C to 70 °C
पैकेज 8-pin SOIC (D)
पिन काउंट 8 pins
माउंटिंग प्रकार Surface mount
Receiver Response Control Resistor or resistor-and-bias input configuration

SN75155D 8-pin soic (d) पिन कॉन्फ़िगरेशन गाइड

SN75155D (8-pin soic (d) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

SN75155D के लिए 8-pin soic (d) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SN75155D.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SN75155D के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial RS-232 Control Interfaces, Point-of-Sale and Serial Terminal Equipment, Data-Acquisition Instrument Links, Legacy Peripheral Communication, Embedded Service and Configuration Ports, Security and Access-Control Systems.

🏭

Industrial RS-232 Control Interfaces

The SN75155D fits industrial controller and data-acquisition interfaces that use a full-duplex RS-232 channel. Its 10 mA current-limited output matches the driver role required by ANSI EIA/TIA-232-E and ITU Recommendation V.28, while the integrated receiver converts the remote bipolar signal into a logic-compatible level. The 0 °C to 70 °C rating suits commercial-temperature enclosure designs. Place the transceiver near the connector, use a solid ground reference, and apply connector-side transient protection where cables leave the enclosure.

🖥️

Point-of-Sale and Serial Terminal Equipment

The SN75155D supports the legacy RS-232 links found in point-of-sale terminals, receipt printers, scanners, and operator consoles. A single package provides both the current-limited transmitter and the receiver needed for bidirectional communication, avoiding separate driver and receiver ICs. The 130 mW low-power design is useful in compact counter equipment. Confirm that the host UART logic levels and the remote equipment’s signaling voltage are compatible, and use the response-control input as directed for receiver behavior.

🔧

Data-Acquisition Instrument Links

The SN75155D is suitable for connecting a controller to laboratory or industrial instrumentation that retains an RS-232 command port. The receiver provides the remote-signal conditioning function, while the 10 mA current-limited driver handles the outgoing command channel. Its 8-pin SOIC package simplifies compact acquisition boards, and its 0 °C to 70 °C operating range aligns with room-temperature test equipment. For long or noisy cables, include appropriate shielding and protection and verify the receiver threshold settings for the actual system noise environment.

🔌

Legacy Peripheral Communication

The SN75155D enables a modern controller to communicate with legacy peripherals that expose only an RS-232 port. Its combined driver and receiver structure supports bidirectional command and response traffic, while compliance with ANSI EIA/TIA-232-E and ITU Recommendation V.28 keeps the interface aligned with established RS-232 practice. The standard 8-pin SOIC D package is straightforward for PCB layout. Account for the slower and more noise-sensitive nature of this interface compared with modern differential or USB links, and provide a direct serial interface in the host firmware.

📱

Embedded Service and Configuration Ports

The SN75155D can provide a field-service or configuration port on embedded industrial equipment. The integrated driver supports commands from a service laptop or terminal, while the receiver captures status responses. Its 130 mW power rating and 8-pin SOIC footprint help conserve board area in compact embedded products. The 0 °C to 70 °C range must remain inside the product’s environmental limits, and technicians should use the same ground and cable practices as the original equipment. A software-visible UART and a defined connector pinout improve field usability.

🎥

Security and Access-Control Systems

The SN75155D is applicable to access-control readers, door controllers, and alarm panels that retain an RS-232 commissioning or diagnostic port. The device provides a current-limited transmit path and a receiver for controller responses, while its standard 0 °C to 70 °C commercial-temperature range fits many indoor enclosures. Use the response-control connection according to the manufacturer guidance to establish the intended receiver threshold. Because access-control cabinets may be electrically noisy, verify ground continuity and add surge or ESD protection at the external connector.

What is the SN75155D and what interface does it support?
The SN75155D is a Texas Instruments monolithic RS-232 line driver and receiver with one transmitter and one receiver. According to the manufacturer datasheet, it meets or exceeds ANSI EIA/TIA-232-E and ITU Recommendation V.28 requirements for the interface between data terminal equipment and data communication equipment. It is intended for conventional bipolar RS-232 links and provides a response-control input for receiver threshold adjustment or noise control.
What are the key specifications of SN75155D that engineers should know?
The SN75155D combines a 10 mA current-limited line-driver output, 130 mW power consumption, and an operating temperature range of 0 °C to 70 °C. Texas Instruments identifies the device as a monolithic line driver and receiver supporting ANSI EIA/TIA-232-E and ITU Recommendation V.28. The exact package is an 8-pin SOIC (D), as shown on the TI product page and ordering information.
Where can I download the SN75155D datasheet PDF?
The official SN75155D datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn75155.pdf. The manufacturer product page identifies the document as the SN75155 datasheet, Revision C. Use that manufacturer document for the authoritative pin description, electrical characteristics, recommended operating conditions, and application circuit rather than relying on a distributor-hosted copy.
Where can I find the SN75155D pinout and package information?
The SN75155D uses an 8-pin SOIC (D) package, and Texas Instruments lists the D package with eight pins on the SN75155 product page. The official datasheet contains the numbered pin-description table. Use that table when assigning driver, receiver, control, ground, and supply connections, and confirm the physical pin-one orientation against the SOIC drawing before PCB assembly.
Can SN75155D be used for a 400 kbit/s RS-232 link?
The SN75155D can be used in RS-232 designs when the complete interface meets the applicable baud-rate and timing limits. Cross-reference information describes the SN75155 family as supporting up to 400 kbit/s and identifies the D suffix as an 8-pin SOIC device. Signal rate alone is not sufficient for release: verify the SN75155D receiver thresholds, driver slew behavior, cable characteristics, and endpoint loading against the manufacturer datasheet.
What is the difference between SN75155D and SN75155DE4?
SN75155D and SN75155DE4 use the same 8-pin SOIC (D) interface arrangement and are identified as functionally compatible same-family parts. The published comparison identifies SN75155DE4 as a complete replacement for SN75155D because its terminals, package, and principal performance characteristics remain consistent. The suffix difference identifies the specific ordering or qualification code, so procurement should still confirm the required grade, temperature range, and marking.
Is SN75155D the same as SN75155DG4?
SN75155D and SN75155DG4 are presented as functionally and pin compatible 8-pin SOIC devices. The cross-reference comparison states that SN75155DG4 can completely replace SN75155D without modification to the existing package or terminals. Before approving the substitution, verify the production grade, temperature rating, marking, and any qualification requirements against the exact manufacturer ordering documentation.
When should I choose SN75155D instead of another same-family part?
Choose SN75155D when an 8-pin SOIC RS-232 transceiver is required and the complete supplier marking for the standard D suffix is acceptable to the design. Select a qualified same-family suffix only when an automotive, military, or other program-specific grade is documented. The device is most appropriate for a single RS-232 channel, a 0 °C to 70 °C commercial-temperature environment, and designs that can use its integrated response-control feature.
Is SN75155D suitable for industrial control and data acquisition equipment?
Yes, SN75155D is suitable for RS-232 interfaces in commercial-temperature industrial and data-acquisition equipment. Its 0 °C to 70 °C operating range, 10 mA current-limited output, and compliance with ANSI EIA/TIA-232-E and ITU Recommendation V.28 support standard serial-port designs. For installations with severe ESD, surge, or long outdoor cable exposure, add appropriate connector protection and verify the deployed temperature range.
What can replace SN75155D without changing the PCB?
SN75155DE4 and SN75155DG4 are documented same-family options that use the same 8-pin SOIC footprint and are identified as complete replacements for SN75155D. Their package and terminal assignments are consistent with the original device. No additional manufacturer-qualified cross-brand replacement was established for the exact combination of functions, so a cross-brand substitution should not be treated as drop-in without a separate pin, timing, threshold, and qualification review.
What is the best Texas Instruments equivalent for SN75155D?
The closest documented Texas Instruments equivalents are SN75155DE4 and SN75155DG4, both of which are listed as complete replacements for SN75155D in the same 8-pin SOIC package. Their primary performance characteristics, terminals, and package are consistent with the standard D-suffix device. The choice depends on the required production grade and exact ordering suffix rather than a change in board layout or interface topology.
Where can I buy SN75155D and check current availability?
Use the Request a Quote form on this page to ask about SN75155D availability, current lead time, and order quantities. The manufacturer product page lists the part as orderable, but inventory and delivery timing can change. Request the exact 8-pin SOIC D-suffix ordering code with your quote so the manufacturer or authorized supply channel confirms the correct package, grade, and shipment configuration.
What is the price of SN75155D?
Use the Request a Quote form on this page for the current SN75155D price and quantity schedule. Pricing depends on order quantity, production grade, market conditions, and supply availability, so a static figure can become inaccurate quickly. The quote request should identify the SN75155D suffix and 8-pin SOIC package so the response reflects the exact device rather than a broader SN75155 family listing.
What is the lead time for SN75155D?
Current SN75155D lead time should be requested through the Request a Quote form on this page. Texas Instruments lists the SN75155 family as orderable, but a manufacturing lead time is not interchangeable with distributor inventory. Include the required quantity, approved package suffix, target shipment date, and production schedule in the request so procurement can confirm an actionable delivery schedule.
Is SN75155D in stock?
SN75155D can be requested for availability through the Request a Quote form on this page. The TI product page lists the standard D suffix as orderable, but that does not guarantee immediate stock at every channel. Specify the required quantity and exact suffix in the request, and ask for a confirmed stock position and lead time before committing the build schedule.

के लिए इंजीनियरिंग संदर्भ डेटा SN75155D — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SN75155D when the design needs a single full-duplex RS-232 channel using a conventional 8-pin SOIC footprint, a 15 V supply arrangement, and commercial-temperature operation from 0 °C to 70 °C. Its integrated current-limited driver, receiver, and response-control input make it suitable for legacy serial ports, industrial controllers, test equipment, and access-control systems. SN75155DE4 or SN75155DG4 may be preferable when a documented grade-coded ordering option is required, but verify the exact temperature and qualification requirements before substitution. MC1488 and MC1489 family devices are useful when separate driver channels are required, but they do not replace the complete SN75155D transceiver function without additional receiver circuitry and board changes. No cross-brand drop-in replacement has been established for the exact pin arrangement and functional combination.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SN75155DE4 SN75155DG4
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Brand Texas Instruments Texas Instruments Texas Instruments
Device Type Line driver and receiver Line driver and receiver Line driver and receiver
Transceiver Configuration 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Pin Compatibility 8-pin SOIC (D) reference design Pin-to-pin compatible; no PCB modification stated Pin-to-pin compatible; no PCB modification stated

मुख्य विशेषताएँ

  • Combines the transmitter and receiver in one package (बनामMC1489NG4)
  • Provides response-control flexibility in the receiver (बनामSN75155DE4)
  • Maintains a documented commercial-temperature range (बनामSN75155DG4)
  • Supports established RS-232 standards (बनामMC1488NE4)

डिज़ाइन नोट्स

Do not treat the SN75155D as a modern TTL UART output or as a ±12 V logic-level driver. The IC is intended for an RS-232 interface, while the host UART must remain compatible with the receiver's logic-level side. Confirm the driver output polarity, receiver threshold, and response-control configuration in the manufacturer pin and application diagrams before connecting a board-level UART or changing the receiver threshold.

Place the SN75155D near the RS-232 connector and route the driver and receiver traces as a short, paired interface path. Keep the return connection continuous and use the connector ground as the circuit reference. The external signal path carries greater voltage swing and more susceptibility than the logic side, so separate logic routing from the cable connection and prevent switching-node copper from sharing the interface area.

Protect an externally accessible RS-232 connector from ESD and surge events with an appropriate protection network. The SN75155D's 10 mA current-limited transmitter does not replace connector-level transient protection. Select protection voltage and capacitance for the interface, connect it to the correct chassis or signal-ground strategy, and verify that it does not distort receiver thresholds or data timing.

Use a supply arrangement compatible with the SN75155D's 15 V operating specification and provide local bypassing close to the supply pins. Decoupling requirements and acceptable bypass characteristics should be taken from the manufacturer application information. Avoid routing high-current return paths through the transceiver ground pin, because shared impedance between the IC, connector, and protection components can shift the receiver input and disturb communication.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the SN75155D. Automotive qualification is not applicable to the standard commercial-temperature SN75155D ordering option.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SN75155D datasheet SN75155D pinout SN75155D datasheet pdf SN75155D equivalent SN75155D replacement SN75155D cross reference SN75155D vs SN75155DE4 SN75155D vs SN75155DG4 SN75155D price SN75155D stock Texas Instruments SN75155D SN75155D 8-SOIC SN75155D RS-232 transceiver SN75155D application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments SN75155D SN75155DE4 SN75155DG4 MC1488NE4 MC1489NG4 MC1489NE4 RS-232 line transceiver line driver line receiver interface IC semiconductor ANSI EIA/TIA-232-E ITU Recommendation V.28 8-pin SOIC SOIC family surface-mount package current-limited output response control receiver threshold commercial temperature industrial control data acquisition legacy serial communication
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें