SN75155D - RS-232 Line Driver/Receiver | Texas Instruments
MPN: SN75155D ✓ 啟用中SN75155D 概覽
An RS-232 line transceiver is an interface IC that converts logic-level signals into voltage levels suitable for serial links while receiving and conditioning remote signals into logic-compatible levels. In the broader semiconductor hierarchy, it belongs to the interface IC class and combines a line driver, a line receiver, and supporting bias or regulation functions within one monolithic package. The response-control input allows a resistor or resistor-and-bias network to be connected to ground for additional receiver noise control.
The SN75155D uses current-limited outputs to support RS-232 signaling without the uncontrolled drive current associated with an ideal voltage source. Its integrated low-power design is specified at 130 mW, making it useful in compact equipment where both interface performance and power consumption matter. The device combines one driver and one receiver rather than providing a complete multi-channel RS-232 port.
Texas Instruments describes the SN75155 as a monolithic line driver and receiver for the interface between data terminal equipment and data communication equipment. The 8-pin SOIC package supports conventional surface-mount assembly, while the 0 °C to 70 °C range targets commercial-temperature equipment. Exact timing, supply-current, receiver-threshold, and output-level details should be taken from the manufacturer datasheet revision identified by Texas Instruments as Revision C.
Typical uses include RS-232 ports for industrial control equipment, data acquisition systems, point-of-sale terminals, legacy serial adapters, and embedded systems that still communicate with RS-232 peripherals. The interface can support host-to-peripheral links where logic levels remain compatible with the SN75155 receiver and where cable length and baud rate satisfy the applicable RS-232 system design limits.
When designing the circuit, treat the response-control input as a receiver-tuning element and follow the manufacturer’s resistor or resistor-and-bias connection guidance. Confirm the system ground strategy, add the required interface protection for exposed connectors, and validate signal levels at the far end of the cable rather than relying only on logic-side measurements.
This product page combines the device interface role, verified package and commercial-temperature information, manufacturer documentation links, practical RS-232 design guidance, and carefully qualified same-family replacement information. It also distinguishes true electrical alternatives from ordinary reel, tape, or grade-code variants so procurement decisions remain tied to board-level compatibility.
直接替換替代品,適用於 SN75155D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
SN75155DE4
✅ 直接替換📋 參考替代品(不在目錄中)
SN75155DG4
✅ 直接替換📋 參考替代品(不在目錄中)
SN75155D 規格
| Device Type | Monolithic RS-232 line driver and receiver |
| Transceiver Configuration | 1 driver and 1 receiver |
| Interface Standard | ANSI EIA/TIA-232-E and ITU Recommendation V.28 |
| 供應電壓 | 15 V |
| Output Drive Current | 10 mA current-limited output |
| Power Consumption | 130 mW |
| 工作溫度 | 0 °C to 70 °C |
| 封裝 | 8-pin SOIC (D) |
| 腳位數 | 8 pins |
| 安裝類型 | Surface mount |
| Receiver Response Control | Resistor or resistor-and-bias input configuration |
SN75155D 8-pin soic (d) 腳位配置指南
SN75155D(8-pin soic (d) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SN75155D.
請參閱 資料表 以查看完整腳位配置。
典型應用
SN75155D 適用於 6 應用s: Industrial RS-232 Control Interfaces, Point-of-Sale and Serial Terminal Equipment, Data-Acquisition Instrument Links, Legacy Peripheral Communication, Embedded Service and Configuration Ports, Security and Access-Control Systems.
Industrial RS-232 Control Interfaces
The SN75155D fits industrial controller and data-acquisition interfaces that use a full-duplex RS-232 channel. Its 10 mA current-limited output matches the driver role required by ANSI EIA/TIA-232-E and ITU Recommendation V.28, while the integrated receiver converts the remote bipolar signal into a logic-compatible level. The 0 °C to 70 °C rating suits commercial-temperature enclosure designs. Place the transceiver near the connector, use a solid ground reference, and apply connector-side transient protection where cables leave the enclosure.
推薦
Point-of-Sale and Serial Terminal Equipment
The SN75155D supports the legacy RS-232 links found in point-of-sale terminals, receipt printers, scanners, and operator consoles. A single package provides both the current-limited transmitter and the receiver needed for bidirectional communication, avoiding separate driver and receiver ICs. The 130 mW low-power design is useful in compact counter equipment. Confirm that the host UART logic levels and the remote equipment’s signaling voltage are compatible, and use the response-control input as directed for receiver behavior.
推薦
Data-Acquisition Instrument Links
The SN75155D is suitable for connecting a controller to laboratory or industrial instrumentation that retains an RS-232 command port. The receiver provides the remote-signal conditioning function, while the 10 mA current-limited driver handles the outgoing command channel. Its 8-pin SOIC package simplifies compact acquisition boards, and its 0 °C to 70 °C operating range aligns with room-temperature test equipment. For long or noisy cables, include appropriate shielding and protection and verify the receiver threshold settings for the actual system noise environment.
推薦
Legacy Peripheral Communication
The SN75155D enables a modern controller to communicate with legacy peripherals that expose only an RS-232 port. Its combined driver and receiver structure supports bidirectional command and response traffic, while compliance with ANSI EIA/TIA-232-E and ITU Recommendation V.28 keeps the interface aligned with established RS-232 practice. The standard 8-pin SOIC D package is straightforward for PCB layout. Account for the slower and more noise-sensitive nature of this interface compared with modern differential or USB links, and provide a direct serial interface in the host firmware.
推薦
Embedded Service and Configuration Ports
The SN75155D can provide a field-service or configuration port on embedded industrial equipment. The integrated driver supports commands from a service laptop or terminal, while the receiver captures status responses. Its 130 mW power rating and 8-pin SOIC footprint help conserve board area in compact embedded products. The 0 °C to 70 °C range must remain inside the product’s environmental limits, and technicians should use the same ground and cable practices as the original equipment. A software-visible UART and a defined connector pinout improve field usability.
推薦
Security and Access-Control Systems
The SN75155D is applicable to access-control readers, door controllers, and alarm panels that retain an RS-232 commissioning or diagnostic port. The device provides a current-limited transmit path and a receiver for controller responses, while its standard 0 °C to 70 °C commercial-temperature range fits many indoor enclosures. Use the response-control connection according to the manufacturer guidance to establish the intended receiver threshold. Because access-control cabinets may be electrically noisy, verify ground continuity and add surge or ESD protection at the external connector.
推薦
推薦產品摘要
工程參考資料,適用於 SN75155D — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SN75155DE4 | SN75155DG4 |
|---|---|---|---|
| Package | 8-pin SOIC (D) | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | Line driver and receiver | Line driver and receiver | Line driver and receiver |
| Transceiver Configuration | 1 driver and 1 receiver | 1 driver and 1 receiver | 1 driver and 1 receiver |
| Pin Compatibility | 8-pin SOIC (D) reference design | Pin-to-pin compatible; no PCB modification stated | Pin-to-pin compatible; no PCB modification stated |
主要差異化特點
- Combines the transmitter and receiver in one package (對比MC1489NG4)
- Provides response-control flexibility in the receiver (對比SN75155DE4)
- Maintains a documented commercial-temperature range (對比SN75155DG4)
- Supports established RS-232 standards (對比MC1488NE4)
設計說明
Do not treat the SN75155D as a modern TTL UART output or as a ±12 V logic-level driver. The IC is intended for an RS-232 interface, while the host UART must remain compatible with the receiver's logic-level side. Confirm the driver output polarity, receiver threshold, and response-control configuration in the manufacturer pin and application diagrams before connecting a board-level UART or changing the receiver threshold.
Place the SN75155D near the RS-232 connector and route the driver and receiver traces as a short, paired interface path. Keep the return connection continuous and use the connector ground as the circuit reference. The external signal path carries greater voltage swing and more susceptibility than the logic side, so separate logic routing from the cable connection and prevent switching-node copper from sharing the interface area.
Protect an externally accessible RS-232 connector from ESD and surge events with an appropriate protection network. The SN75155D's 10 mA current-limited transmitter does not replace connector-level transient protection. Select protection voltage and capacitance for the interface, connect it to the correct chassis or signal-ground strategy, and verify that it does not distort receiver thresholds or data timing.
Use a supply arrangement compatible with the SN75155D's 15 V operating specification and provide local bypassing close to the supply pins. Decoupling requirements and acceptable bypass characteristics should be taken from the manufacturer application information. Avoid routing high-current return paths through the transceiver ground pin, because shared impedance between the IC, connector, and protection components can shift the receiver input and disturb communication.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the SN75155D. Automotive qualification is not applicable to the standard commercial-temperature SN75155D ordering option.