STM32F103VGT6TR - 72MHz Cortex-M3 MCU | STMicroelectronics
MPN: STM32F103VGT6TR ✓ सक्रियSTM32F103VGT6TR अवलोकन
A microcontroller, or MCU, is a compact computer designed around a processor core, program memory, data memory, peripherals, and I/O ports. The STM32F103 architecture sits within the hierarchy of ARM Cortex-M3 embedded processor, 32-bit microcontroller, and embedded systems controller. Its role is to execute firmware, acquire sensor data, control actuators, and manage communication links in industrial, consumer, and communications equipment.
Principal features include a 72 MHz Cortex-M3 core, 1 MB of Flash, 96 KB of SRAM, 37 I/O ports, and USB, CAN, and LIN connectivity. The 2 V to 3.6 V operating range supports conventional 3.3 V systems. The 100-LQFP package provides enough I/O and perimeter pins for motor drives, motion control, communications modules, and embedded control boards while supporting a conventional surface-mount assembly process.
The STM32F103VGT6TR combines general-purpose application processing with dedicated peripheral resources. Its 32-bit core and 72 MHz clock provide useful computational headroom for protocol handling, digital control loops, and supervisory logic. The 1 MB Flash capacity supports larger embedded applications and boot code, while the SRAM accommodates working state, communications buffers, and real-time control data. USB, CAN, and LIN interfaces reduce the need for separate communication controllers.
Typical uses include CAN-connected industrial controllers, USB data-acquisition equipment, stepper and BLDC motor-control systems, networking modules, and compact control platforms. The 37 I/O ports make the device practical for digital interfaces, status indicators, sensors, and actuator drivers. For designs using the CAN, LIN, or USB peripherals, firmware validation remains important because timing, interrupt behavior, and peripheral configuration determine real-world performance.
A key design consideration is power and signal integrity at the 100-pin LQFP perimeter. Place decoupling capacitors near the supply pins, route sensitive inputs away from switching nodes, and verify the oscillator, reset, and boot configuration network against the manufacturer reference schematic. The 2 V to 3.6 V supply range requires components and external interfaces that tolerate the selected operating voltage.
This page combines the exact STM32F103VGT6TR ordering characteristics, package and memory details, pin-compatible alternatives, application guidance, and PCB design considerations. It supports faster engineering evaluation by making the key differences among same-family and cross-brand replacements visible before a PCB or firmware change is committed.
के लिए ड्रॉप-इन विकल्प STM32F103VGT6TR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32F103VGT6TR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Flash Memory, Mounting Type, Product Line, Series.
STM32F103VFT6TR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32F103VGT6J
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32F103VGT7
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →GD32F103VGT6
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
APM32F103VGT6
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F103VGT6TR Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | STM32F1 series |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 96 KB |
| Program Memory Type | Flash |
| Supply Voltage Range | 2 V to 3.6 V |
| I/O Port Count | 37 |
| पैकेज | 100-pin LQFP (14 x 14 mm) |
| CPU Core | ARM Cortex-M3 |
| Architecture | 32-bit |
| Communications Interfaces | USB, CAN, LIN |
| माउंटिंग प्रकार | Surface-mount tape and reel |
| RoHS Compliance | Compliant |
STM32F103VGT6TR 100-pin lqfp (14 x 14 mm) पिन कॉन्फ़िगरेशन गाइड
STM32F103VGT6TR (100-pin lqfp (14 x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32F103VGT6TR.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32F103VGT6TR के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial CAN Control Node, USB Data-Acquisition System, Stepper and BLDC Motor Control, Industrial Networking Module, Consumer Automation and Embedded Control, USB-C Motor and Sensor Interface.
Industrial CAN Control Node
STM32F103VGT6TR fits industrial CAN control nodes that require local decision-making and reliable network connectivity. Its 72 MHz Cortex-M3 core handles protocol processing and supervisory logic, while CAN, LIN, USB, and 37 I/O ports support sensors, status devices, and actuators. The 1 MB Flash capacity accommodates application code, communication stacks, configuration data, and update routines without relying on external program memory. Use the device near 2 V to 3.6 V rails and follow the manufacturer reference circuit for CAN transceiver placement, termination, decoupling, and protected I/O routing.
अनुशंसित
USB Data-Acquisition System
STM32F103VGT6TR is suitable for USB data-acquisition equipment that transfers sensor measurements to a host computer. Its 72 MHz 32-bit core supports sampling logic, buffering, protocol handling, and supervisory tasks, while 96 KB of SRAM provides space for acquisition buffers and communications state. The 37 I/O ports can support digital inputs, sensor enables, status signaling, and external triggers. Its 2 V to 3.6 V operating range fits conventional 3.3 V systems, while the 100-pin LQFP package offers enough connections for multiple channels and interface isolation.
अनुशंसित
Stepper and BLDC Motor Control
STM32F103VGT6TR fits compact motor-drive controllers where deterministic control, multiple I/O, and embedded communications are needed. The 72 MHz Cortex-M3 core can execute position and velocity loops, commutation logic, fault handling, and communication protocols, while 37 I/O ports support encoder inputs, step commands, gate-driver enables, and fault signals. Its 1 MB Flash provides room for motion algorithms and parameter storage. The 2 V to 3.6 V supply range fits typical 3.3 V control electronics, but power-stage isolation, current sensing, and high-current routing must be designed separately from the MCU domain.
अनुशंसित
Industrial Networking Module
STM32F103VGT6TR works well in compact networking modules that need USB or CAN alongside embedded application processing. The 72 MHz Cortex-M3 core can manage frame processing, routing logic, configuration, and local control, while 1 MB Flash and 96 KB SRAM support embedded stacks and protocol state. Its 37 I/O ports provide status LEDs, configuration interfaces, reset control, and external network management signals. The 100-pin LQFP package also leaves sufficient perimeter pins for isolation barriers, level shifting, and multiple communication interfaces in a DIN-rail or embedded module design.
अनुशंसित
Consumer Automation and Embedded Control
STM32F103VGT6TR is practical for embedded control boards that combine user interfaces, sensors, relays, and programmable logic. Its 72 MHz core supports responsive control and communication, while 1 MB Flash accommodates application firmware, configuration, and boot features. The 37 I/O ports are useful for touch or button inputs, display signals, and actuator control. Because the core operates from 2 V to 3.6 V, the design should use compatible sensors and interface levels, separate noisy loads from sensitive traces, and provide local bulk and high-frequency decoupling at the LQFP supply pins.
अनुशंसित
USB-C Motor and Sensor Interface
STM32F103VGT6TR can serve as the central controller in a USB-connected motor or sensor interface. The Cortex-M3 core handles command parsing, control updates, diagnostics, and data formatting, while USB provides a direct host connection for configuration and telemetry. Its 37 I/O ports support encoders, digital sensors, motor-control signals, and status indicators, and the 1 MB Flash provides room for larger control tables and protocol handlers. The 2 V to 3.6 V operating range simplifies 3.3 V logic integration, although USB connector protection, ESD control, and power-supply sequencing should be handled with dedicated external circuitry.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32F103VGT6TR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32F103VFT6TR | STM32F103VGT6J | STM32F103VGT7 | GD32F103VGT6 | APM32F103VGT6 |
|---|---|---|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | GigaDevice |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Ordering Grade or Temperature Suffix | TR | TR | J | 7 | 6 | 6 |
मुख्य विशेषताएँ
- Larger Flash capacity than the F-density same-package option (बनामSTM32F103VFT6TR)
- Cross-brand replacement offers higher clock performance (बनामGD32F103VGT6)
- Established STM32F1 toolchain and peripheral continuity (बनामAPM32F103VGT6)
- Complete connectivity in a 100-pin footprint (बनामSTM32F103VGT6J)
डिज़ाइन नोट्स
Treat the 100-pin LQFP as a perimeter-heavy mixed-signal component. Place every supply decoupling capacitor directly beside its associated VDD and VSS pins, with the shortest possible ground return. Follow the manufacturer reference layout for exposed pad, via pattern, and thermal-via arrangement where applicable. Keep external crystals, reset components, and boot-configuration parts close to their assigned pins to reduce susceptibility to switching noise and ringing.
Design the 2 V to 3.6 V operating range into the power tree rather than assuming a fixed 3.3 V rail. Confirm startup voltage, brownout behavior, output-voltage tolerance, and current demand against the manufacturer datasheet. Separate analog and digital supply branches where the device provides dedicated supply pins, and use local bulk capacitance to support transient loads without allowing supply droop to disrupt USB, CAN, or timer operations.
Route USB, CAN, and LIN interfaces away from motor-drive nodes and switching power-converter traces. Keep high-current return paths out of the MCU ground region, and place transceiver protection components close to connector or transceiver pins. For oscillator-sensitive functions, provide symmetric routing, a clean ground reference, and no test-point stubs. Check that motor-control outputs, encoder inputs, and communication lines do not share narrow return paths that could inject timing noise.
Do not treat a cross-brand Cortex-M3 controller as firmware-identical to STM32F103VGT6TR. Before adopting GD32F103VGT6 or another substitute, validate clock configuration, flash wait states, interrupt priorities, startup timing, USB and CAN behavior, ADC calibration, timer edge cases, and toolchain support. Preserve the original 100-LQFP land pattern and verify pin multiplexing rather than relying only on the 100-pin count.
अनुपालन जानकारी
RoHS compliance is stated in the product listing. No additional REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified.