STM32F207VGT7 - 120MHz Cortex-M3 1MB MCU | STMicroelectronics
MPN: STM32F207VGT7 ✓ सक्रियSTM32F207VGT7 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, analog converters, and I/O into one device. The STM32F2 series belongs to the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M3 MCU, and system-on-chip device. Its combination of processing performance, networking capability, and external peripherals makes it suitable for connected industrial, communications, and consumer equipment.
The STM32F207VGT7 provides up to 120 MHz operation, 1 MB of Flash memory, and USB, Ethernet, camera, and other communication interfaces. The manufacturer identifies the STM32F20x family as an Arm Cortex-M3 MCU family operating at up to 120 MHz. Its 100-LQFP package exposes substantially more I/O than smaller microcontroller packages, supporting parallel interfaces, multiple serial channels, analog inputs, and mixed communication peripherals.
The STM32F207 family combines a high-performance Cortex-M3 core with extensive peripheral integration, including USB OTG high-speed and full-speed operation, Ethernet MAC, multiple timers, three ADCs, and up to 15 communication interfaces. This architecture allows real-time control tasks, communications, data acquisition, and graphical-camera data handling to share one processor platform while reducing external component count.
Typical uses include industrial gateways, Ethernet-connected controllers, USB equipment, camera modules, building automation, data-acquisition systems, and consumer electronics. The 100-pin LQFP is especially useful when a design requires many peripheral connections but does not need the board area of a large BGA package. Its 14 x 14 mm outline still supports manageable industrial and embedded board layouts.
Designers should preserve the STM32F2 hardware-design guidance for power, decoupling, clocking, reset, and signal routing. Pay particular attention to analog-supply filtering, high-speed USB and Ethernet layout, and the required startup and firmware programming interfaces. Confirm all electrical limits and pin assignments against the STM32F205xx and STM32F207xx manufacturer datasheet before releasing the PCB.
This product page consolidates the confirmed 120 MHz performance, 1 MB Flash configuration, package information, connectivity features, application guidance, and design considerations into an engineering-focused reference. It also identifies same-family LQFP-100 alternatives and separates confirmed cross-reference candidates from those selected from established STM32 family knowledge.
के लिए ड्रॉप-इन विकल्प STM32F207VGT7 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32F207VGT7 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Flash Memory, Camera Interface, Communication Interfaces, Core.
STM32F205VGT6
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32F215VGT6
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F207VGT6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित✗ स्टॉक में नहीं
$6.8182 / यूनिट
डेटाशीट देखें →STM32F205VGT7
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F215VGT7
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F207VGT7 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | Arm Cortex-M3 32-bit RISC core |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1 MB (1M x 8) |
| System RAM | 128 KB plus 4 KB |
| पैकेज | 100-pin LQFP (14 x 14 mm) |
| USB Support | USB OTG high-speed and full-speed |
| Ethernet Support | Ethernet MAC |
| Timer Count | 17 timers |
| ADC Count | 3 ADCs |
| Communication Interface Count | Up to 15 communication interfaces |
| Camera Interface | Camera interface |
| Nominal Supply Voltage | 2.5 V or 3.3 V |
STM32F207VGT7 100-pin lqfp (14 x 14 mm) पिन कॉन्फ़िगरेशन गाइड
STM32F207VGT7 (100-pin lqfp (14 x 14 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32F207VGT7.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32F207VGT7 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, USB-to-Industrial Data Acquisition, Camera-Based Vision Control, Building Automation Controller, Precision Timer and Motor Control, Connected Consumer Controller.
Industrial Ethernet Gateway
The STM32F207VGT7 fits an industrial Ethernet gateway because its 120 MHz Arm Cortex-M3 core can process network traffic and supervisory control logic while the integrated Ethernet MAC reduces the need for a separate controller. Its 1 MB Flash supports protocol stacks, configuration data, diagnostics, and firmware updates, while 17 timers and up to 15 communication interfaces support local sensors and actuators. The 100-pin LQFP also provides ample external connections for transceiver control, status indicators, serial links, and digital I/O. Board implementation should preserve controlled-impedance Ethernet routing, isolated magnetics, correct clocking, and clean separation between digital and analog supply paths.
अनुशंसित
USB-to-Industrial Data Acquisition
The STM32F207VGT7 is appropriate for a USB-connected data-acquisition controller because it combines USB OTG high-speed and full-speed operation with three ADCs and 17 timers. The 120 MHz Cortex-M3 core can handle sampling control, digital filtering, USB data transfer, and host-side command processing, while 1 MB Flash accommodates firmware, calibration tables, and protocol code. Multiple communication interfaces permit connection to sensors, external memory, or downstream controllers. The design should assign analog and digital grounds carefully, follow the datasheet's analog-supply recommendations, validate input signal ranges, and use controlled-impedance USB routing with correct connector and protection implementation.
अनुशंसित
Camera-Based Vision Control
The STM32F207VGT7 supports camera-oriented vision control because it provides a camera interface, a 120 MHz Arm Cortex-M3 core, 1 MB Flash, and extensive communications in one device. It can capture image data, perform initial image processing, coordinate exposure or motion timing, and relay results through Ethernet, USB, or serial links. The 100-pin LQFP offers enough pins for a camera interface, control signals, encoders, memory, and external peripherals. Development should focus on camera timing, sensor voltage compatibility, DMA allocation, memory bandwidth, and signal routing. The integrated MCU is suitable for control and edge-processing functions, although final image-processing requirements determine the required external memory and image sensor choice.
अनुशंसित
Building Automation Controller
The STM32F207VGT7 is well suited to a building-automation controller because it combines high-performance control capability with numerous serial interfaces, timers, and ADCs. The 1 MB Flash can store networking stacks, scheduling data, control logic, and update images, while the Cortex-M3 operating at up to 120 MHz supports protocol processing and multiple real-time control loops. The 100-pin package simplifies access to communication transceivers, digital inputs, relay drivers, and analog sensors. For reliable deployment, use isolated communication interfaces where required, define power-loss recovery behavior, validate watchdog and brownout settings, and keep switching-node layouts away from sensitive analog and communication circuits.
अनुशंसित
Precision Timer and Motor Control
The STM32F207VGT7 can serve as the central controller in a precision timer or motor-control system because the STM32F207 family includes 17 timers, three ADCs, and a 120 MHz Arm Cortex-M3 core. The timers support precise event generation, counting, and periodic control, while the ADC inputs allow current, position, or sensor feedback to be sampled. The 1 MB Flash provides room for control algorithms, parameter tables, and diagnostics, and the LQFP-100 package exposes the required timer, communication, and I/O resources. Design work should include pin alternate-function selection, timer clock verification, PWM output filtering, ADC impedance matching, and thermal analysis of power devices driven by the controller.
अनुशंसित
Connected Consumer Controller
The STM32F207VGT7 supports a connected consumer product requiring flexible I/O, high-speed control, and wired network or USB connectivity. Its 120 MHz Cortex-M3 core can manage a user interface, local processing, communications, and real-time peripheral control, while 1 MB Flash simplifies deployment of application code and update mechanisms. USB OTG, Ethernet MAC, up to 15 communication interfaces, 17 timers, and three ADCs allow several product functions to be consolidated. In a compact design, the 14 x 14 mm LQFP is easier to assemble than many fine-pitch BGA options. Designers should still budget capacitors and regulators correctly, separate noisy switching supplies, and test USB, Ethernet, and clock startup across all intended operating modes.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32F207VGT7 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32F205VGT6 | STM32F215VGT6 | STM32F207VGT6 | STM32F205VGT7 | STM32F215VGT7 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| Processor Core | Arm Cortex-M3 32-bit RISC | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 | Arm Cortex-M3 |
मुख्य विशेषताएँ
- Combines high-performance control with integrated network connectivity (बनामSTM32F205VGT6)
- Broad peripheral integration reduces external controller overhead (बनामSTM32F215VGT6)
- Provides ample code and RAM for connected embedded workloads (बनामSTM32F205VGT7)
डिज़ाइन नोट्स
Implement separate analog and digital supply branches according to the manufacturer hardware guidelines, placing local bulk and high-frequency decoupling capacitors close to the associated power pins. The STM32F207VGT7 supports multiple demanding peripherals, including Ethernet, USB, camera, and ADCs, so supply noise can affect both communications and measurement accuracy. Confirm the exact pin numbers, voltage tolerances, capacitor values, and external regulator requirements in the manufacturer datasheet before schematic release.
Keep USB and Ethernet signal routes short, continuous, and referenced to a solid ground plane. Follow the manufacturer recommendations for high-speed differential routing, impedance control, via transitions, and transceiver placement. Ethernet magnetics should connect close to the controller and physical layer, while USB connector protection and routing must minimize branch stubs. Analog inputs for the three ADCs should be isolated from switching and high-speed return currents to prevent conversion errors.
Do not assume that any 100-pin STM32F2 device is automatically interchangeable. The target, STM32F205VGT6, STM32F215VGT6, and other same-family candidates can differ in pin multiplexing, clock limits, peripheral availability, memory configuration, and ordering grade. Create a substitution matrix covering every used pin, alternate function, supply rail, clock source, boot behavior, and peripheral instance before approving a second source. Re-run firmware and hardware regression tests after any substitution.
Programming and debug access must remain compatible with the selected STM32F2 boot and reset implementation. Preserve the intended boot strap configuration, reset behavior, and exposed debug or serial programming interface while avoiding address conflicts with Ethernet, USB, or other peripherals. Validate clock startup, watchdog behavior, and brownout recovery early, since incorrect reset or clock assumptions can prevent firmware from reaching a stable operating state.
अनुपालन जानकारी
No definitive environmental or automotive qualification declarations were stated for this exact ordering code. Use the manufacturer product page or declarations for the current compliance status before procurement.