STM32F107RBT6 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
MPN: STM32F107RBT6 ✓ सक्रियSTM32F107RBT6 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32F107RBT6 belongs to the STM32 family of 32-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. Its connectivity-oriented feature set allows one controller to manage application logic and multiple communication tasks without requiring separate interface devices.
The principal device characteristics are a 72 MHz Arm Cortex-M3 core, 128 KB of Flash program memory, and a 64-pin LQFP package. According to the STMicroelectronics STM32F107RB product page, the device is an Active Mainstream Connectivity product. The integrated Ethernet MAC supports networked equipment, while CAN is appropriate for industrial and automotive-style controller networks. USB 2.0 OTG adds peripheral, host, or dual-role USB connectivity depending on the system configuration.
The STM32F107 architecture combines a 32-bit Cortex-M3 instruction set with 128 KB of Flash and integrated connectivity peripherals. This device is identified as part of the STM32F1 family, whose members are commonly used where deterministic embedded control, protocol handling, and moderate processing performance are required. The 72 MHz operating frequency provides useful headroom for communication stacks, control loops, and supervisory firmware without moving to a higher-performance MCU family.
Typical uses include Ethernet-connected industrial controllers, USB-based data acquisition equipment, CAN-connected automation controllers, industrial gateways, and embedded network interface modules. The Ethernet MAC, CAN controller, and USB 2.0 OTG interface make the MCU especially useful where several communication standards must coexist in a compact control design. It is also suitable for custom communication hubs and protocol bridges where local real-time control remains important.
PCB design should preserve the exact LQFP-64 land pattern, power-supply decoupling, clock implementation, and peripheral signal-routing requirements identified in the manufacturer datasheet. USB and Ethernet interfaces need careful controlled-impedance routing and appropriate grounding, while high-speed or long external bus routes should be reviewed for signal-integrity and EMC behavior. Confirm the exact pin assignments and alternate-function settings before finalizing the schematic and firmware configuration.
This product page combines the manufacturer specifications with practical connectivity guidance, verified sourcing information, package-level comparison data, and engineering-focused replacement considerations. It also separates the STM32F107RB device-level information from the exact STM32F107RBT6 order code so procurement, PCB design, and firmware planning can be evaluated together.
के लिए ड्रॉप-इन विकल्प STM32F107RBT6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32F107RBT6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Ethernet Interface, Flash Memory, Product Series, USB Interface.
GD32F107RBT6
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F107RBT6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | STM32F1 Mainstream Connectivity line |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Architecture | 32-bit RISC |
| सप्लाई वोल्टेज | 2.5 V or 3.3 V |
| Ethernet Interface | Integrated Ethernet MAC |
| CAN Interface | Integrated CAN controller |
| USB Interface | USB 2.0 OTG |
| पैकेज | 64-pin LQFP |
| माउंटिंग प्रकार | Surface mount |
| Order Code Packaging | Tray |
| लाइफसाइकिल स्थिति | Active |
STM32F107RBT6 64-pin lqfp पिन कॉन्फ़िगरेशन गाइड
STM32F107RBT6 (64-pin lqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32F107RBT6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32F107RBT6 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Controller, USB Data Acquisition System, CAN Network Automation Hub, Industrial IoT Gateway, Network Protocol Bridge, USB-Connected Control Console.
Industrial Ethernet Controller
The STM32F107RBT6 fits industrial Ethernet equipment because its 72 MHz Arm Cortex-M3 core can execute control logic and network firmware while the integrated Ethernet MAC handles Ethernet traffic. It also provides CAN for connecting the controller to sensors, drives, or remote I/O. The device is placed between the external Ethernet PHY and the application peripherals, with the MCU managing protocol processing, supervisory tasks, and system status. Its 128 KB of Flash provides a defined firmware budget for connectivity and control functions. The key engineering trade-off is that the Ethernet physical layer still requires an external PHY, magnetics, protection, and carefully controlled board layout.
अनुशंसित
USB Data Acquisition System
The STM32F107RBT6 is suitable for USB data-acquisition equipment because it combines a 72 MHz Cortex-M3 processor with 128 KB of Flash and USB 2.0 OTG. The MCU can sample control inputs, format measurements, and communicate with a host over USB while leaving CAN and Ethernet available for equipment integration. Its role is typically a real-time acquisition and protocol controller rather than a simple data logger. Designers should budget USB transceiver, connector, ESD-protection, decoupling, and clock components separately, while also reviewing the exact USB alternate-function pins and operating limits in the manufacturer documentation.
अनुशंसित
CAN Network Automation Hub
The STM32F107RBT6 supports automation hubs that must coordinate multiple embedded nodes over CAN while also providing Ethernet or USB connectivity. Its 72 MHz Cortex-M3 core is appropriate for protocol processing, filtering, diagnostics, and supervisory logic, and the integrated CAN controller reduces the need for a separate communications IC. The controller can bridge or aggregate automation data rather than merely monitor a single bus. Hardware design still requires the appropriate CAN transceiver, termination strategy, surge protection, and grounding strategy. Firmware should validate bit timing, error handling, bus-off recovery, and the impact of the 3.3 V or 2.5 V supply configuration.
अनुशंसित
Industrial IoT Gateway
The STM32F107RBT6 is well suited to compact industrial IoT gateways because Ethernet, CAN, and USB 2.0 OTG are integrated into one microcontroller. At 72 MHz with 128 KB of Flash, it can collect local sensor data, run protocol conversion, maintain device status, and provide a network interface without a separate processor for each communication standard. The MCU can sit beside an Ethernet PHY and a CAN transceiver, making it useful for edge equipment that converts fieldbus data to IP. Designers should consider boot security, firmware-update strategy, watchdog behavior, and thermal performance inside a sealed enclosure.
अनुशंसित
Network Protocol Bridge
The STM32F107RBT6 can act as a compact protocol bridge between USB, CAN, and Ethernet-based systems. Its Cortex-M3 core handles frame conversion, buffering, filtering, and supervisory functions, while the three integrated connectivity blocks provide the main physical-interface options. The bridge application benefits from deterministic local processing and a single 64-pin LQFP footprint. Implementation requires separate Ethernet PHY and CAN transceiver circuits, plus careful signal-integrity routing and firmware scheduling. Before production, verify protocol timing, worst-case throughput, buffer behavior, and restart recovery when either network link is disconnected.
अनुशंसित
USB-Connected Control Console
The STM32F107RBT6 is appropriate for a USB-connected control console that combines local adjustment, status monitoring, and network access. Its USB 2.0 OTG interface can connect the product to a host for configuration or service access, while Ethernet and CAN support integration with plant equipment. The 72 MHz Cortex-M3 core and 128 KB of Flash provide room for a control application, diagnostics, and communication firmware. The USB interface needs correct routing and protection, and the console should include a defined firmware-update and recovery path. The manufacturer ordering information should also be checked against the intended temperature range and enclosure conditions.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32F107RBT6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | GD32F107RBT6 |
|---|---|---|
| Manufacturer | STMicroelectronics | GigaDevice |
| Package | 64-pin LQFP | LQFP-64 |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz | Up to 108 MHz |
मुख्य विशेषताएँ
- Established STMicroelectronics STM32F1 connectivity platform (बनामGD32F107RBT6)
- Connectivity interfaces consolidated in one device (बनामGD32F107RBT6)
- Clear active product-family positioning (बनामGD32F107RBT6)
डिज़ाइन नोट्स
Use the manufacturer LQFP-64 footprint and pin-description table to create the PCB land pattern. Place the required decoupling capacitors close to the corresponding power pins, keep the ground return path short, and preserve the manufacturer clock and debug connections. Ethernet and USB are high-speed interfaces: route them over continuous reference planes with the specified impedance, minimize vias and stubs, and separate noisy switching or motor-drive paths from sensitive communication traces.
Confirm the exact STM32F107RBT6 supply-voltage configuration against the manufacturer electrical characteristics before selecting regulators and decoupling. The comparison information identifies 2.5 V or 3.3 V operation for this order code, but individual peripherals, I/O speed, and absolute maximum limits must be checked in the manufacturer datasheet. Check startup current, I/O drive limits, analog-supply requirements, and the total current drawn by USB, Ethernet PHY, transceivers, and external circuitry.
Keep Ethernet PHY, magnetics, ESD protection, and their supply components close to the corresponding board connector, while maintaining the separation needed to limit radiated and conducted emissions. USB routing should follow the manufacturer interface recommendations and use a properly terminated differential pair. CAN routing should account for transceiver placement, common-mode protection, bus topology, and termination locations. Do not treat the integrated MAC, USB, and CAN blocks as complete physical-layer implementations.
A second-source MCU is not automatically interchangeable. Before approving GD32F107RBT6, compare pin multiplexing, interrupt mapping, clocks, timer behavior, USB and Ethernet peripheral implementation, startup code, peripheral libraries, programming tools, and the exact order code. Although the cross-reference identifies P2P compatibility with disclosed differences, production validation should include brownout behavior, communications stress tests, timing margins, bootloader recovery, and a review of any firmware license implications.
अनुपालन जानकारी
The cited manufacturer product page identifies the STM32F107RB family as Active but does not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification for this exact order code.