STM32F107RBT6 - 72MHz Cortex-M3 128KB MCU | STMicroelectronics
MPN: STM32F107RBT6 ✓ 啟用中STM32F107RBT6 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32F107RBT6 belongs to the STM32 family of 32-bit microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor components. Its connectivity-oriented feature set allows one controller to manage application logic and multiple communication tasks without requiring separate interface devices.
The principal device characteristics are a 72 MHz Arm Cortex-M3 core, 128 KB of Flash program memory, and a 64-pin LQFP package. According to the STMicroelectronics STM32F107RB product page, the device is an Active Mainstream Connectivity product. The integrated Ethernet MAC supports networked equipment, while CAN is appropriate for industrial and automotive-style controller networks. USB 2.0 OTG adds peripheral, host, or dual-role USB connectivity depending on the system configuration.
The STM32F107 architecture combines a 32-bit Cortex-M3 instruction set with 128 KB of Flash and integrated connectivity peripherals. This device is identified as part of the STM32F1 family, whose members are commonly used where deterministic embedded control, protocol handling, and moderate processing performance are required. The 72 MHz operating frequency provides useful headroom for communication stacks, control loops, and supervisory firmware without moving to a higher-performance MCU family.
Typical uses include Ethernet-connected industrial controllers, USB-based data acquisition equipment, CAN-connected automation controllers, industrial gateways, and embedded network interface modules. The Ethernet MAC, CAN controller, and USB 2.0 OTG interface make the MCU especially useful where several communication standards must coexist in a compact control design. It is also suitable for custom communication hubs and protocol bridges where local real-time control remains important.
PCB design should preserve the exact LQFP-64 land pattern, power-supply decoupling, clock implementation, and peripheral signal-routing requirements identified in the manufacturer datasheet. USB and Ethernet interfaces need careful controlled-impedance routing and appropriate grounding, while high-speed or long external bus routes should be reviewed for signal-integrity and EMC behavior. Confirm the exact pin assignments and alternate-function settings before finalizing the schematic and firmware configuration.
This product page combines the manufacturer specifications with practical connectivity guidance, verified sourcing information, package-level comparison data, and engineering-focused replacement considerations. It also separates the STM32F107RB device-level information from the exact STM32F107RBT6 order code so procurement, PCB design, and firmware planning can be evaluated together.
直接替換替代品,適用於 STM32F107RBT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F107RBT6 (相同外形與佔位) — 差異在於 Ethernet Interface, Flash Memory, Product Series, USB Interface.
GD32F107RBT6
✅ 直接替換📋 參考替代品(不在目錄中)
STM32F107RBT6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Series | STM32F1 Mainstream Connectivity line |
| CPU Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Architecture | 32-bit RISC |
| 供應電壓 | 2.5 V or 3.3 V |
| Ethernet Interface | Integrated Ethernet MAC |
| CAN Interface | Integrated CAN controller |
| USB Interface | USB 2.0 OTG |
| 封裝 | 64-pin LQFP |
| 安裝類型 | Surface mount |
| Order Code Packaging | Tray |
| 生命週期狀態 | Active |
STM32F107RBT6 64-pin lqfp 腳位配置指南
STM32F107RBT6(64-pin lqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F107RBT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F107RBT6 適用於 6 應用s: Industrial Ethernet Controller, USB Data Acquisition System, CAN Network Automation Hub, Industrial IoT Gateway, Network Protocol Bridge, USB-Connected Control Console.
Industrial Ethernet Controller
The STM32F107RBT6 fits industrial Ethernet equipment because its 72 MHz Arm Cortex-M3 core can execute control logic and network firmware while the integrated Ethernet MAC handles Ethernet traffic. It also provides CAN for connecting the controller to sensors, drives, or remote I/O. The device is placed between the external Ethernet PHY and the application peripherals, with the MCU managing protocol processing, supervisory tasks, and system status. Its 128 KB of Flash provides a defined firmware budget for connectivity and control functions. The key engineering trade-off is that the Ethernet physical layer still requires an external PHY, magnetics, protection, and carefully controlled board layout.
推薦
USB Data Acquisition System
The STM32F107RBT6 is suitable for USB data-acquisition equipment because it combines a 72 MHz Cortex-M3 processor with 128 KB of Flash and USB 2.0 OTG. The MCU can sample control inputs, format measurements, and communicate with a host over USB while leaving CAN and Ethernet available for equipment integration. Its role is typically a real-time acquisition and protocol controller rather than a simple data logger. Designers should budget USB transceiver, connector, ESD-protection, decoupling, and clock components separately, while also reviewing the exact USB alternate-function pins and operating limits in the manufacturer documentation.
推薦
CAN Network Automation Hub
The STM32F107RBT6 supports automation hubs that must coordinate multiple embedded nodes over CAN while also providing Ethernet or USB connectivity. Its 72 MHz Cortex-M3 core is appropriate for protocol processing, filtering, diagnostics, and supervisory logic, and the integrated CAN controller reduces the need for a separate communications IC. The controller can bridge or aggregate automation data rather than merely monitor a single bus. Hardware design still requires the appropriate CAN transceiver, termination strategy, surge protection, and grounding strategy. Firmware should validate bit timing, error handling, bus-off recovery, and the impact of the 3.3 V or 2.5 V supply configuration.
推薦
Industrial IoT Gateway
The STM32F107RBT6 is well suited to compact industrial IoT gateways because Ethernet, CAN, and USB 2.0 OTG are integrated into one microcontroller. At 72 MHz with 128 KB of Flash, it can collect local sensor data, run protocol conversion, maintain device status, and provide a network interface without a separate processor for each communication standard. The MCU can sit beside an Ethernet PHY and a CAN transceiver, making it useful for edge equipment that converts fieldbus data to IP. Designers should consider boot security, firmware-update strategy, watchdog behavior, and thermal performance inside a sealed enclosure.
推薦
Network Protocol Bridge
The STM32F107RBT6 can act as a compact protocol bridge between USB, CAN, and Ethernet-based systems. Its Cortex-M3 core handles frame conversion, buffering, filtering, and supervisory functions, while the three integrated connectivity blocks provide the main physical-interface options. The bridge application benefits from deterministic local processing and a single 64-pin LQFP footprint. Implementation requires separate Ethernet PHY and CAN transceiver circuits, plus careful signal-integrity routing and firmware scheduling. Before production, verify protocol timing, worst-case throughput, buffer behavior, and restart recovery when either network link is disconnected.
推薦
USB-Connected Control Console
The STM32F107RBT6 is appropriate for a USB-connected control console that combines local adjustment, status monitoring, and network access. Its USB 2.0 OTG interface can connect the product to a host for configuration or service access, while Ethernet and CAN support integration with plant equipment. The 72 MHz Cortex-M3 core and 128 KB of Flash provide room for a control application, diagnostics, and communication firmware. The USB interface needs correct routing and protection, and the console should include a defined firmware-update and recovery path. The manufacturer ordering information should also be checked against the intended temperature range and enclosure conditions.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F107RBT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | GD32F107RBT6 |
|---|---|---|
| Manufacturer | STMicroelectronics | GigaDevice |
| Package | 64-pin LQFP | LQFP-64 |
| CPU Core | Arm Cortex-M3 | Arm Cortex-M3 |
| Maximum CPU Frequency | 72 MHz | Up to 108 MHz |
主要差異化特點
- Established STMicroelectronics STM32F1 connectivity platform (對比GD32F107RBT6)
- Connectivity interfaces consolidated in one device (對比GD32F107RBT6)
- Clear active product-family positioning (對比GD32F107RBT6)
設計說明
Use the manufacturer LQFP-64 footprint and pin-description table to create the PCB land pattern. Place the required decoupling capacitors close to the corresponding power pins, keep the ground return path short, and preserve the manufacturer clock and debug connections. Ethernet and USB are high-speed interfaces: route them over continuous reference planes with the specified impedance, minimize vias and stubs, and separate noisy switching or motor-drive paths from sensitive communication traces.
Confirm the exact STM32F107RBT6 supply-voltage configuration against the manufacturer electrical characteristics before selecting regulators and decoupling. The comparison information identifies 2.5 V or 3.3 V operation for this order code, but individual peripherals, I/O speed, and absolute maximum limits must be checked in the manufacturer datasheet. Check startup current, I/O drive limits, analog-supply requirements, and the total current drawn by USB, Ethernet PHY, transceivers, and external circuitry.
Keep Ethernet PHY, magnetics, ESD protection, and their supply components close to the corresponding board connector, while maintaining the separation needed to limit radiated and conducted emissions. USB routing should follow the manufacturer interface recommendations and use a properly terminated differential pair. CAN routing should account for transceiver placement, common-mode protection, bus topology, and termination locations. Do not treat the integrated MAC, USB, and CAN blocks as complete physical-layer implementations.
A second-source MCU is not automatically interchangeable. Before approving GD32F107RBT6, compare pin multiplexing, interrupt mapping, clocks, timer behavior, USB and Ethernet peripheral implementation, startup code, peripheral libraries, programming tools, and the exact order code. Although the cross-reference identifies P2P compatibility with disclosed differences, production validation should include brownout behavior, communications stress tests, timing margins, bootloader recovery, and a review of any firmware license implications.
合規資訊
The cited manufacturer product page identifies the STM32F107RB family as Active but does not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification for this exact order code.