STM32F777VIH6 - 216MHz Cortex-M7 MCU, 2MB Flash | STMicroelectronics
MPN: STM32F777VIH6 ✓ सक्रियSTM32F777VIH6 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F7 family belongs to the embedded-processing hierarchy of microcontrollers, real-time processors, and semiconductor control devices. Its Arm Cortex-M7 architecture supports efficient interrupt-driven control while hardware peripherals accelerate communication, timing, signal capture, and data-transfer tasks without requiring a separate external processor for each function.
The STM32F777VIH6 provides up to 2 MB of Flash organized as 2 M by 8 bits, a 32-bit CPU, and operation at up to 216 MHz. Its timer subsystem supports as many as 18 timers, including thirteen 16-bit timers, two 32-bit timers, two watchdogs, and the SysTick timer. Peripheral functions include Dual-mode Quad-SPI, enabling efficient transfers to serial flash, QSPI memory, and other compatible external devices.
The high operating frequency supports computationally intensive control loops and real-time signal processing. Sixteen-bit and 32-bit timers provide dedicated channels for input capture, output compare, PWM generation, pulse counting, and incremental quadrature-encoder inputs. The STM32F777VIH6 is therefore suitable when deterministic timing and concurrent peripheral activity are more important than minimizing cost or board area.
Typical applications include industrial automation equipment, motor-control systems, networked embedded products, audio and DSP front ends, test and measurement instruments, and high-speed data-acquisition platforms. Its combination of 216 MHz processing, extensive timers, and Quad-SPI allows control logic and external data-storage or communication devices to operate within one compact embedded architecture.
PCB implementation requires careful attention to the 8 mm by 8 mm TFBGA land pattern, power distribution, high-speed clock routing, and exposed-pad thermal management. Follow the manufacturer pin-definition table and recommended land pattern when assigning balls and placing decoupling capacitors. Validate the complete power, clock, reset, and firmware configuration before production release.
This product overview combines the manufacturer family information with practical considerations for package layout, timing, firmware compatibility, sourcing, and replacement planning. It also identifies the technical distinctions that matter when evaluating the STM32F777VIH6 against same-package members of the STM32F7 family.
के लिए ड्रॉप-इन विकल्प STM32F777VIH6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32F777VIH6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Flash Memory, Product Type, 16-Bit Timers, 32-Bit Timers.
STM32F777NIH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32F777VJH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F777VCH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F777VGH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F777VMH6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F777VIH6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M7 microcontroller |
| CPU Core | Arm Cortex-M7 |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 2 MB (2M x 8 bits) |
| Architecture | 32-bit RISC |
| पैकेज | 100-TFBGA, 8 mm x 8 mm |
| पिन काउंट | 100 balls |
| माउंटिंग प्रकार | Surface mount |
| Maximum Timer Count | 18 timers |
| 16-Bit Timers | Up to 13 timers |
| 32-Bit Timers | Up to 2 timers |
| Low-Power 16-Bit Timer | 1 timer available in Stop mode |
| Timer Maximum Operating Frequency | 216 MHz |
| Timer Counter Functions | Up to 4 IC/OC/PWM or pulse-counter inputs per timer |
| Encoder Support | Quadrature incremental encoder input |
| Watchdogs | 2 watchdogs |
| System Timer | SysTick timer |
| Serial Flash Interface | Dual-mode Quad-SPI |
STM32F777VIH6 100-tfbga, 8 mm x 8 mm पिन कॉन्फ़िगरेशन गाइड
STM32F777VIH6 (100-tfbga, 8 mm x 8 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32F777VIH6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32F777VIH6 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Control, High-Speed Data Acquisition, Industrial Networking Gateway, Audio Signal Processing, Test and Measurement Instrument, Embedded Storage Controller.
Industrial Motor Control
The STM32F777VIH6 fits industrial motor-control systems that require fast control-loop execution and precise multi-channel timing. Its Arm Cortex-M7 core operates at up to 216 MHz, while the timer bank provides thirteen 16-bit and two 32-bit timers with input-capture, output-compare, PWM, pulse-counting, and quadrature-encoder functions. These resources can drive power stages, sample position signals, and regulate current or speed without assigning every timing function to a separate peripheral. The 2 MB of Flash provides room for control algorithms, parameter storage, diagnostics, and boot logic. A board designer should partition timers among motor-control, communications, and safety tasks while following the manufacturer clock-tree and decoupling requirements.
अनुशंसित
High-Speed Data Acquisition
The STM32F777VIH6 is appropriate for data-acquisition equipment that must sample, filter, and transfer data under deterministic timing constraints. A 216 MHz Arm Cortex-M7 core can execute digital filtering and control logic while dedicated timers handle trigger intervals, capture timing, pulse counting, and encoder-derived position. The family also provides two watchdogs and SysTick for independent task monitoring and system scheduling. Up to 2 MB of Flash allows substantial firmware and configuration tables to be stored locally, while Dual-mode Quad-SPI can connect high-speed serial memory for buffering or extended storage. Designers should size external memory around the required sustained transfer rate and apply the manufacturer's signal-integrity guidance to clocks, data buses, and ground returns.
अनुशंसित
Industrial Networking Gateway
The STM32F777VIH6 can serve as the real-time controller in an industrial networking gateway where protocol handling must coexist with deterministic local I/O. Its 216 MHz Cortex-M7 performance provides headroom for packet processing, routing logic, diagnostics, and control-plane tasks, while as many as 18 timers support periodic scheduling, input capture, and communication timing. Two watchdogs add useful resilience for independent subsystem monitoring, and the 2 MB Flash capacity accommodates networking firmware and configuration data. The system should reserve timers for time-critical functions rather than using them for general software delays. Keep external communication interfaces on short, controlled-impedance routes and use separate filtering or partitioning for sensitive analog and power domains.
अनुशंसित
Audio Signal Processing
The STM32F777VIH6 supports audio front ends that combine real-time sampling, filtering, transport control, and system supervision. The 216 MHz Arm Cortex-M7 core is suited to fixed-point processing and tightly bounded control tasks, while the high-resolution timer resources can generate accurate sample clocks, frame timing, and PWM-based monitoring. SysTick and two watchdogs support scheduling and fault detection around critical signal paths. Up to 2 MB of Flash is valuable for DSP code, lookup tables, boot firmware, and configuration. Quad-SPI can provide high-speed access to external program or data storage. For a production design, isolate noisy switching or motor circuitry from audio signals, maintain continuous return paths, and verify clock jitter against the audio-performance budget.
अनुशंसित
Test and Measurement Instrument
The STM32F777VIH6 is suitable for automated test and measurement equipment requiring precise sequencing, fast control computation, and multiple timed channels. The timer bank can define measurement windows, trigger delays, pulse generation, and counter operations at up to 216 MHz, while the Cortex-M7 core processes acquired results and handles instrument control. Two watchdogs and SysTick support deterministic scheduling and recovery from stalled subsystems. The 2 MB Flash capacity can hold test routines, calibration tables, communication stacks, and boot code. Quad-SPI permits high-speed access to calibration data or capture buffers. Engineers should use independent clock and reset planning for sensitive measurements and validate timer jitter, trigger accuracy, and analog isolation at the system level.
अनुशंसित
Embedded Storage Controller
The STM32F777VIH6 fits embedded storage controllers that require high-speed serial-memory access alongside local real-time management. Its Dual-mode Quad-SPI interface can connect compatible serial flash devices, while the 216 MHz Cortex-M7 core manages command queues, error recovery, wear management, and background data processing. The timer resources support precise data-transfer timing, watchdog-like service intervals, pulse counting, and synchronization with other system events. Up to 2 MB of Flash holds firmware, metadata, and recovery logic, while two watchdogs can monitor critical operations. Layout should keep the Quad-SPI clock and data routing short, provide clean power and ground references, and account for package-routing differences between memory devices and the STM32F777VIH6's 100-TFBGA footprint.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32F777VIH6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32F777NIH6 | STM32F777VJH6 | STM32F777VCH6 | STM32F777VGH6 | STM32F777VMH6 |
|---|---|---|---|---|---|---|
| Package | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 | Arm Cortex-M7 |
| Maximum CPU Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB | 2 MB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| Maximum Timer Count | 18 timers | 18 timers | 18 timers | 18 timers | 18 timers | 18 timers |
| Timer Maximum Operating Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
| Serial Flash Interface | Dual-mode Quad-SPI | Dual-mode Quad-SPI | Dual-mode Quad-SPI | Dual-mode Quad-SPI | Dual-mode Quad-SPI | Dual-mode Quad-SPI |
| Watchdogs | 2 watchdogs | 2 watchdogs | 2 watchdogs | 2 watchdogs | 2 watchdogs | 2 watchdogs |
मुख्य विशेषताएँ
- High-speed 32-bit Arm Cortex-M7 processing (बनामSTM32F777NIH6)
- Extensive hardware timer bank (बनामSTM32F777VJH6)
- Dual-mode Quad-SPI for external serial storage (बनामSTM32F777VCH6)
डिज़ाइन नोट्स
Base the layout on the manufacturer 100-TFBGA land pattern rather than a generic 100-ball BGA pattern. Assign power and ground balls directly from the package pin-definition table, place decoupling capacitors adjacent to the relevant supply balls, and preserve continuous return paths beneath clock and high-speed data routes. The 8 mm by 8 mm package offers less routing area than many leaded packages, so fanout and escape strategies should be planned before the first PCB revision.
Treat the 216 MHz clock and Quad-SPI signals as high-speed nets. Use short, symmetrical routes, avoid splits across ground regions, and follow the manufacturer recommendations for decoupling and trace geometry. Verify source-series termination, clock jitter, and Quad-SPI eye margin with realistic external-memory loading. If the design also handles audio or precision analog signals, keep those paths away from switching power stages and provide a quiet ground reference.
Separate the core and peripheral supply distribution as shown in the manufacturer application guidance, placing bulk and local decoupling where their effective inductance is minimized. Check startup current, regulator stability, and the permitted voltage range for the exact ordering code before fixing the power architecture. The MCU can execute at 216 MHz, but the final operating frequency also depends on the selected voltage range, clock configuration, thermal conditions, and firmware settings.
Do not select a replacement from the STM32F777 base name alone. Confirm the complete order code, 100-TFBGA package, temperature range, flash configuration, and qualification class in the manufacturer ordering information. After any suffix change, rebuild the project with the corresponding device definition, verify clock limits and startup behavior, and run the complete peripheral test suite. Software-generated code and startup files can differ between ordering codes even when the land pattern is unchanged.
Estimate junction temperature from the actual PCB copper area, ambient temperature, and package thermal data rather than assuming that a small package remains cool. At a 216 MHz operating point, switching loss and external regulator dissipation can contribute substantial system heat even when the controller itself is not the hottest component. Use the manufacturer thermal characterization for the exact package and provide adequate copper, via distribution, enclosure ventilation, and temperature monitoring for high-duty-cycle industrial operation.
अनुपालन जानकारी
The product pages and manufacturer datasheet identified for STM32F777VIH6 do not provide explicit compliance or automotive-qualification values. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status for the exact ordering code before release.