STMicroelectronics

STM32F777VIH6 - 216MHz Cortex-M7 MCU, 2MB Flash | STMicroelectronics

MPN: STM32F777VIH6 ✓ فعال
100-TFBGA, 8 mm x 8 mm Package 216 MHz Speed 2 MB (2M x 8 bits) Memory
MOQ: 1 |

STM32F777VIH6 جائزہ

The STMicroelectronics STM32F777VIH6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of Flash memory in a 100-ball TFBGA package measuring 8 mm by 8 mm. The STM32F777VIH6 combines a 216 MHz CPU core, extensive timer resources, and high-speed serial peripherals for demanding embedded-control, communications, audio, and industrial applications.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F7 family belongs to the embedded-processing hierarchy of microcontrollers, real-time processors, and semiconductor control devices. Its Arm Cortex-M7 architecture supports efficient interrupt-driven control while hardware peripherals accelerate communication, timing, signal capture, and data-transfer tasks without requiring a separate external processor for each function.

The STM32F777VIH6 provides up to 2 MB of Flash organized as 2 M by 8 bits, a 32-bit CPU, and operation at up to 216 MHz. Its timer subsystem supports as many as 18 timers, including thirteen 16-bit timers, two 32-bit timers, two watchdogs, and the SysTick timer. Peripheral functions include Dual-mode Quad-SPI, enabling efficient transfers to serial flash, QSPI memory, and other compatible external devices.

The high operating frequency supports computationally intensive control loops and real-time signal processing. Sixteen-bit and 32-bit timers provide dedicated channels for input capture, output compare, PWM generation, pulse counting, and incremental quadrature-encoder inputs. The STM32F777VIH6 is therefore suitable when deterministic timing and concurrent peripheral activity are more important than minimizing cost or board area.

Typical applications include industrial automation equipment, motor-control systems, networked embedded products, audio and DSP front ends, test and measurement instruments, and high-speed data-acquisition platforms. Its combination of 216 MHz processing, extensive timers, and Quad-SPI allows control logic and external data-storage or communication devices to operate within one compact embedded architecture.

PCB implementation requires careful attention to the 8 mm by 8 mm TFBGA land pattern, power distribution, high-speed clock routing, and exposed-pad thermal management. Follow the manufacturer pin-definition table and recommended land pattern when assigning balls and placing decoupling capacitors. Validate the complete power, clock, reset, and firmware configuration before production release.

This product overview combines the manufacturer family information with practical considerations for package layout, timing, firmware compatibility, sourcing, and replacement planning. It also identifies the technical distinctions that matter when evaluating the STM32F777VIH6 against same-package members of the STM32F7 family.

کے لیے ڈراپ اِن متبادل STM32F777VIH6 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM32F777VIH6 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Flash Memory, Product Type, 16-Bit Timers, 32-Bit Timers.

STMicroelectronics
Package: 216-TFBGA (13 mm x 13 mm)
Flash Memory: 2 MB (2M x 8)
Product Type: High-performance 32-bit ARM Cortex-M7 microcontroller
موازنہ کریں STM32F777VIH6 →
STMicroelectronics
Package: 100-LQFP (14 x 14 mm)
Flash Memory: 2 MB (2M x 8)
16-Bit Timers: Up to 13
موازنہ کریں STM32F777VIH6 →

STM32F777NIH6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
STMicroelectronics
📦 100-TFBGA (8x8 mm)
High-performance 32-bit ARM Cortex-M7 microcontroller · STMicroelectronics · 216 MHz · Arm Cortex-M7, 32-bit RISC · 2 MB (2M x 8) · 216-TFBGA (13 mm x 13 mm) · 216 balls · Surface mount

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

STM32F777VJH6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 100-TFBGA (8x8 mm)
Same STM32F777VI 216 MHz Cortex-M7 family and 100-TFBGA footprint; suffix may specify a different temperature grade, with core frequency and memory family unchanged.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32F777VCH6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 100-TFBGA (8x8 mm)
Same STM32F777VI 216 MHz Cortex-M7 family and 100-TFBGA footprint; ordering suffix may alter the qualification or temperature range while preserving the main electrical architecture.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32F777VGH6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 100-TFBGA (8x8 mm)
Same STM32F777VI 216 MHz Cortex-M7 family and 100-TFBGA footprint; ordering suffix may change temperature or qualification without changing the 216 MHz core rating.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32F777VMH6

✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ
📦 100-TFBGA (8x8 mm)
Same STM32F777VI 216 MHz Cortex-M7 family and 100-TFBGA footprint; ordering suffix may differ in qualification or temperature class while retaining core and timer performance.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

STM32F777VIH6 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 32-bit ARM Cortex-M7 microcontroller
CPU Core Arm Cortex-M7
Maximum CPU Frequency 216 MHz
Flash Memory 2 MB (2M x 8 bits)
Architecture 32-bit RISC
پیکیج 100-TFBGA, 8 mm x 8 mm
پن کی تعداد 100 balls
ماؤنٹنگ ٹائپ Surface mount
Maximum Timer Count 18 timers
16-Bit Timers Up to 13 timers
32-Bit Timers Up to 2 timers
Low-Power 16-Bit Timer 1 timer available in Stop mode
Timer Maximum Operating Frequency 216 MHz
Timer Counter Functions Up to 4 IC/OC/PWM or pulse-counter inputs per timer
Encoder Support Quadrature incremental encoder input
Watchdogs 2 watchdogs
System Timer SysTick timer
Serial Flash Interface Dual-mode Quad-SPI

STM32F777VIH6 100-tfbga, 8 mm x 8 mm پن کنفیگریشن گائیڈ

STM32F777VIH6 (100-tfbga, 8 mm x 8 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM32F777VIH6 کے لیے 100-tfbga, 8 mm x 8 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM32F777VIH6.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM32F777VIH6 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Motor Control, High-Speed Data Acquisition, Industrial Networking Gateway, Audio Signal Processing, Test and Measurement Instrument, Embedded Storage Controller.

🏭

Industrial Motor Control

The STM32F777VIH6 fits industrial motor-control systems that require fast control-loop execution and precise multi-channel timing. Its Arm Cortex-M7 core operates at up to 216 MHz, while the timer bank provides thirteen 16-bit and two 32-bit timers with input-capture, output-compare, PWM, pulse-counting, and quadrature-encoder functions. These resources can drive power stages, sample position signals, and regulate current or speed without assigning every timing function to a separate peripheral. The 2 MB of Flash provides room for control algorithms, parameter storage, diagnostics, and boot logic. A board designer should partition timers among motor-control, communications, and safety tasks while following the manufacturer clock-tree and decoupling requirements.

📟

High-Speed Data Acquisition

The STM32F777VIH6 is appropriate for data-acquisition equipment that must sample, filter, and transfer data under deterministic timing constraints. A 216 MHz Arm Cortex-M7 core can execute digital filtering and control logic while dedicated timers handle trigger intervals, capture timing, pulse counting, and encoder-derived position. The family also provides two watchdogs and SysTick for independent task monitoring and system scheduling. Up to 2 MB of Flash allows substantial firmware and configuration tables to be stored locally, while Dual-mode Quad-SPI can connect high-speed serial memory for buffering or extended storage. Designers should size external memory around the required sustained transfer rate and apply the manufacturer's signal-integrity guidance to clocks, data buses, and ground returns.

🌐

Industrial Networking Gateway

The STM32F777VIH6 can serve as the real-time controller in an industrial networking gateway where protocol handling must coexist with deterministic local I/O. Its 216 MHz Cortex-M7 performance provides headroom for packet processing, routing logic, diagnostics, and control-plane tasks, while as many as 18 timers support periodic scheduling, input capture, and communication timing. Two watchdogs add useful resilience for independent subsystem monitoring, and the 2 MB Flash capacity accommodates networking firmware and configuration data. The system should reserve timers for time-critical functions rather than using them for general software delays. Keep external communication interfaces on short, controlled-impedance routes and use separate filtering or partitioning for sensitive analog and power domains.

🎧

Audio Signal Processing

The STM32F777VIH6 supports audio front ends that combine real-time sampling, filtering, transport control, and system supervision. The 216 MHz Arm Cortex-M7 core is suited to fixed-point processing and tightly bounded control tasks, while the high-resolution timer resources can generate accurate sample clocks, frame timing, and PWM-based monitoring. SysTick and two watchdogs support scheduling and fault detection around critical signal paths. Up to 2 MB of Flash is valuable for DSP code, lookup tables, boot firmware, and configuration. Quad-SPI can provide high-speed access to external program or data storage. For a production design, isolate noisy switching or motor circuitry from audio signals, maintain continuous return paths, and verify clock jitter against the audio-performance budget.

🔧

Test and Measurement Instrument

The STM32F777VIH6 is suitable for automated test and measurement equipment requiring precise sequencing, fast control computation, and multiple timed channels. The timer bank can define measurement windows, trigger delays, pulse generation, and counter operations at up to 216 MHz, while the Cortex-M7 core processes acquired results and handles instrument control. Two watchdogs and SysTick support deterministic scheduling and recovery from stalled subsystems. The 2 MB Flash capacity can hold test routines, calibration tables, communication stacks, and boot code. Quad-SPI permits high-speed access to calibration data or capture buffers. Engineers should use independent clock and reset planning for sensitive measurements and validate timer jitter, trigger accuracy, and analog isolation at the system level.

🖥️

Embedded Storage Controller

The STM32F777VIH6 fits embedded storage controllers that require high-speed serial-memory access alongside local real-time management. Its Dual-mode Quad-SPI interface can connect compatible serial flash devices, while the 216 MHz Cortex-M7 core manages command queues, error recovery, wear management, and background data processing. The timer resources support precise data-transfer timing, watchdog-like service intervals, pulse counting, and synchronization with other system events. Up to 2 MB of Flash holds firmware, metadata, and recovery logic, while two watchdogs can monitor critical operations. Layout should keep the Quad-SPI clock and data routing short, provide clean power and ground references, and account for package-routing differences between memory devices and the STM32F777VIH6's 100-TFBGA footprint.

تجویز کردہ پروڈکٹس کا خلاصہ

STM32F777VI Same STM32F777VI device family استعمال ہوتا ہے: Industrial Motor Control, High-Speed Data Acquisition, Industrial Networking Gateway, Audio Signal Processing, Test and Measurement Instrument, Embedded Storage Controller STM32F777VIH6 STMicroelectronics استعمال ہوتا ہے: Industrial Motor Control, High-Speed Data Acquisition, Industrial Networking Gateway, Audio Signal Processing, Test and Measurement Instrument, Embedded Storage Controller
What are the key specifications of STM32F777VIH6 that engineers should know?
The STM32F777VIH6 is a 32-bit Arm Cortex-M7 microcontroller rated for operation at up to 216 MHz, with 2 MB of Flash memory and a 100-ball TFBGA package measuring 8 mm by 8 mm. According to the STMicroelectronics manufacturer datasheet, the device also provides as many as 18 timers, including thirteen 16-bit timers and two 32-bit timers, plus two watchdogs and SysTick. These figures establish its principal advantages in high-speed control, real-time timing, and DSP-oriented embedded designs.
What is the maximum CPU frequency of STM32F777VIH6?
The STM32F777VIH6 operates at up to 216 MHz. According to the STMicroelectronics manufacturer datasheet, the STM32F777xx family is built around a high-performance Arm Cortex-M7 32-bit RISC core, and all 15 timers can operate at the same 216 MHz maximum timing frequency. The high clock rate is valuable for computationally intensive control loops, signal processing, and systems that need short real-time response times.
How much Flash memory does STM32F777VIH6 contain?
The STM32F777VIH6 contains 2 MB of Flash memory organized as 2 M by 8 bits. The manufacturer listing and STMicroelectronics family documentation identify this device as part of the STM32F777xx range. Its storage capacity supports embedded firmware, boot code, configuration data, and application assets, while Quad-SPI can extend external high-speed storage when the internal memory is insufficient.
What package does STM32F777VIH6 use?
The STM32F777VIH6 uses a 100-ball TFBGA package measuring 8 mm by 8 mm. The manufacturer product listing identifies the package as 100-TFBGA, and the DigiKey product record describes the device as an ARM Cortex-M7 STM32F7 microcontroller in that package. A dedicated package library entry was not available for this TFBGA construction, so use the manufacturer land pattern rather than a generic BGA drawing.
Where can I download the STM32F777VIH6 datasheet PDF?
The official STM32F777VIH6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32f777bi.pdf. The document covers the STM32F777xx, STM32F778Ax, and STM32F779xx families and includes the pin definitions, electrical characteristics, memory map, and peripheral descriptions needed for hardware and firmware design. Confirm that the package and ordering information correspond to the 100-TFBGA STM32F777VIH6 variant.
Where is the STM32F777VIH6 pinout and ball assignment published?
The STM32F777VIH6 pinout and ball assignment are published in the pin-definition tables of the official STMicroelectronics STM32F777 family datasheet. Because the device uses a 100-ball TFBGA, engineers should assign every ball by its package-specific number rather than translating directly from an LQFP version. Use the manufacturer land pattern and pin table together to preserve power, ground, reset, clock, and high-speed-signal routing requirements.
What timer resources are available on STM32F777VIH6?
The STM32F777VIH6 supports up to 18 timers: thirteen 16-bit timers, two 32-bit timers, and the additional system timing resources. According to the STMicroelectronics manufacturer datasheet, all 15 primary timers can run at up to 216 MHz, with up to four input-capture, output-compare, PWM, pulse-counter, or quadrature-encoder channels per timer. One 16-bit low-power timer is also available in Stop mode for continued timing during low-power operation.
Is STM32F777VIH6 suitable for motor-control and encoder systems?
The STM32F777VIH6 is suitable for motor-control and encoder systems because its timers support input capture, output compare, PWM generation, pulse counting, and quadrature incremental-encoder inputs. According to the STMicroelectronics manufacturer datasheet, individual timers provide up to four such channels and can operate at 216 MHz. The device is particularly appropriate where precise timing and real-time PWM control are required near the power-conversion stage.
STM32F777VIH6 vs STM32F777NIH6 - which should be selected?
The STM32F777VIH6 and STM32F777NIH6 belong to the same STM32F777VI family and use the same 100-TFBGA package, but their ordering codes may encode different qualification or temperature options. According to the STMicroelectronics ordering documentation, the complete suffix must be checked before substitution. Compare the package, temperature grade, flash configuration, and qualification requirements for the specific product line rather than relying only on the base family name.
What can replace STM32F777VIH6 without redesigning the PCB?
A direct PCB-compatible replacement must use the same 100-ball TFBGA land pattern and provide matching pin functions, electrical limits, memory, clocking, and peripheral resources. Same-family STM32F777 order codes with different temperature or qualification codes may be suitable, subject to the manufacturer ordering table. Cross-brand devices should not be assumed to be drop-in replacements because peripheral mapping, firmware startup code, clock trees, and electrical characteristics can differ despite similar processor performance.
Is STM32F777VIH6 the same as STM32F777NIH6?
The STM32F777VIH6 is not automatically interchangeable with STM32F777NIH6 solely because both names contain STM32F777VI. They are related STM32F7 devices in the same package family, while their complete order codes may indicate different qualification or temperature grades. According to the STMicroelectronics ordering documentation, compare every suffix position before treating either device as a replacement. Firmware and peripheral configuration should also be checked against the exact device identity.
When should I choose STM32F777VIH6 instead of a lower-frequency STM32F7 device?
Choose the STM32F777VIH6 when the design benefits from its 216 MHz Arm Cortex-M7 performance, extensive 16-bit and 32-bit timer resources, and 2 MB of Flash rather than merely requiring basic embedded control. Its high-speed timers support precise PWM, capture, pulse counting, and encoder handling. According to the STMicroelectronics manufacturer datasheet, all 15 primary timers can operate at 216 MHz, making the device appropriate for demanding real-time and signal-processing workloads.
Where can I buy STM32F777VIH6 online and check its lead time?
Use the Request a Quote form on this page to ask about STM32F777VIH6 availability, current lead time, minimum order quantity, and order handling. The manufacturer product page and distributor listings show the device as an STM32F777VI-family microcontroller, but quotation details can change with demand and inventory. Request a written response for the exact STM32F777VIH6 ordering code and 100-TFBGA configuration.
What is the lead time for STM32F777VIH6?
The current lead time for STM32F777VIH6 should be confirmed through the Request a Quote form on this page using the exact manufacturer ordering code. Lead time depends on factory inventory, production scheduling, package demand, and the quantity required. The DigiKey and Mouser product records identify exact-match listings, but live availability and delivery commitments should be confirmed for the planned build rather than inferred from a search result.
What is the price of STM32F777VIH6?
The current price for STM32F777VIH6 is presented through the Request a Quote form on this page rather than as a static market figure. The exact MPN is STM32F777VIH6 in the 100-TFBGA package, and quotations should reflect that ordering code, requested quantity, delivery schedule, and shipment destination. This approach avoids substituting pricing for a different package, temperature grade, reel code, or related STM32F7 member.
Is STM32F777VIH6 currently in stock?
Current stock for STM32F777VIH6 should be confirmed through the Request a Quote form on this page. Exact-match distributor records exist for the device, but a listing does not by itself guarantee inventory at the quantity or delivery date required for a production build. Ask for the exact MPN, quantity, 100-TFBGA package, manufacturing condition, and committed delivery schedule when requesting a quotation.
What design checks are important for the STM32F777VIH6 100-TFBGA layout?
The STM32F777VIH6 layout should be based on the manufacturer 100-TFBGA land pattern, with careful treatment of power, ground, decoupling, reset, clock, and high-speed signals. According to the STMicroelectronics manufacturer datasheet, the device can operate at 216 MHz, so route clocks and timing-critical interfaces with controlled impedance and return paths. Place input and bulk-decoupling capacitors close to their assigned balls and provide thermal relief under the package as required by the package drawing.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM32F777VIH6 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM32F777VIH6 when an embedded system needs a 216 MHz Arm Cortex-M7 core, 2 MB of Flash, extensive timer resources, and a compact 100-TFBGA footprint. It is particularly suitable for motor control, data acquisition, industrial networking, audio processing, and test equipment where timing accuracy and real-time computation are central requirements. The same-family alternatives in the comparison share the core, memory class, timer resources, and package, so their complete order codes must be checked for temperature range and qualification. Choose a different suffix only after confirming electrical limits, lifecycle status, and the exact manufacturer device definition. Do not treat a generic STM32F7 device as a drop-in substitute merely because it uses a similar Cortex-M core; alternate package pinouts, peripheral differences, clock constraints, and firmware support can require board or software changes.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ STM32F777NIH6 STM32F777VJH6 STM32F777VCH6 STM32F777VGH6 STM32F777VMH6
Package 100-TFBGA (8x8 mm) 100-TFBGA (8x8 mm) 100-TFBGA (8x8 mm) 100-TFBGA (8x8 mm) 100-TFBGA (8x8 mm) 100-TFBGA (8x8 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7 Arm Cortex-M7
Maximum CPU Frequency 216 MHz 216 MHz 216 MHz 216 MHz 216 MHz 216 MHz
Flash Memory 2 MB 2 MB 2 MB 2 MB 2 MB 2 MB
Architecture 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC 32-bit RISC
Maximum Timer Count 18 timers 18 timers 18 timers 18 timers 18 timers 18 timers
Timer Maximum Operating Frequency 216 MHz 216 MHz 216 MHz 216 MHz 216 MHz 216 MHz
Serial Flash Interface Dual-mode Quad-SPI Dual-mode Quad-SPI Dual-mode Quad-SPI Dual-mode Quad-SPI Dual-mode Quad-SPI Dual-mode Quad-SPI
Watchdogs 2 watchdogs 2 watchdogs 2 watchdogs 2 watchdogs 2 watchdogs 2 watchdogs

اہم امتیازی خصوصیات

  • High-speed 32-bit Arm Cortex-M7 processing (بمقابلہSTM32F777NIH6)
  • Extensive hardware timer bank (بمقابلہSTM32F777VJH6)
  • Dual-mode Quad-SPI for external serial storage (بمقابلہSTM32F777VCH6)

ڈیزائن نوٹس

Base the layout on the manufacturer 100-TFBGA land pattern rather than a generic 100-ball BGA pattern. Assign power and ground balls directly from the package pin-definition table, place decoupling capacitors adjacent to the relevant supply balls, and preserve continuous return paths beneath clock and high-speed data routes. The 8 mm by 8 mm package offers less routing area than many leaded packages, so fanout and escape strategies should be planned before the first PCB revision.

Treat the 216 MHz clock and Quad-SPI signals as high-speed nets. Use short, symmetrical routes, avoid splits across ground regions, and follow the manufacturer recommendations for decoupling and trace geometry. Verify source-series termination, clock jitter, and Quad-SPI eye margin with realistic external-memory loading. If the design also handles audio or precision analog signals, keep those paths away from switching power stages and provide a quiet ground reference.

Separate the core and peripheral supply distribution as shown in the manufacturer application guidance, placing bulk and local decoupling where their effective inductance is minimized. Check startup current, regulator stability, and the permitted voltage range for the exact ordering code before fixing the power architecture. The MCU can execute at 216 MHz, but the final operating frequency also depends on the selected voltage range, clock configuration, thermal conditions, and firmware settings.

Do not select a replacement from the STM32F777 base name alone. Confirm the complete order code, 100-TFBGA package, temperature range, flash configuration, and qualification class in the manufacturer ordering information. After any suffix change, rebuild the project with the corresponding device definition, verify clock limits and startup behavior, and run the complete peripheral test suite. Software-generated code and startup files can differ between ordering codes even when the land pattern is unchanged.

Estimate junction temperature from the actual PCB copper area, ambient temperature, and package thermal data rather than assuming that a small package remains cool. At a 216 MHz operating point, switching loss and external regulator dissipation can contribute substantial system heat even when the controller itself is not the hottest component. Use the manufacturer thermal characterization for the exact package and provide adequate copper, via distribution, enclosure ventilation, and temperature monitoring for high-duty-cycle industrial operation.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The product pages and manufacturer datasheet identified for STM32F777VIH6 do not provide explicit compliance or automotive-qualification values. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status for the exact ordering code before release.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-19 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

STM32F777VIH6 datasheet STM32F777VIH6 pinout STM32F777VIH6 datasheet pdf STM32F777VIH6 equivalent STM32F777VIH6 replacement STM32F777VIH6 price STM32F777VIH6 stock STM32F777VIH6 100-TFBGA STM32F777VIH6 216MHz Cortex-M7 STMicroelectronics STM32F777VIH6 STM32F777VIH6 vs STM32F777NIH6 STM32F777VIH6 Quad-SPI STM32F777VIH6 motor control STM32F777VIH6 timers

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM32F777VIH6 STM32F777VI STM32F777NIH6 STM32F777VJH6 STM32F777VCH6 STM32F777VGH6 STM32F777VMH6 Arm Cortex-M7 microcontroller embedded processor 32-bit RISC 2 MB Flash 216 MHz 100-TFBGA BGA family surface-mount technology Quad-SPI dual-mode Quad-SPI 16-bit timer 32-bit timer PWM quadrature encoder SysTick watchdog timer industrial motor control data acquisition industrial networking audio signal processing embedded storage test and measurement Arm Cortex-M7 processor
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں