STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics
MPN: STM32L476QEI6 ✓ सक्रियSTM32L476QEI6 अवलोकन
An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby operation. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, Arm Cortex-M microcontroller, and low-power system-on-chip. This combination makes the STM32L476QEI6 suitable for compact systems where processing capability, peripheral integration, board area, and battery life must be balanced.
Principal features include an 80 MHz Arm Cortex-M4 core with hardware floating-point support, 512 KB of programmable Flash, and 128 KB of SRAM. The 132-UFBGA package provides a dense 7 x 7 mm footprint for space-constrained designs. USB OTG and LCD support reduce the need for external interface controllers, while operation from 1.8 V, 2.5 V, and 3.3 V supplies allows integration with common low-voltage system rails.
The Cortex-M4 architecture provides a 32-bit instruction set, deterministic interrupt handling, and efficient execution of control, communications, and signal-processing firmware. A hardware FPU accelerates floating-point calculations without relying entirely on software emulation. Integrated low-power modes are important in applications that spend substantial time idle, while the dense package supports wearable, portable, and embedded industrial products without requiring a large communications processor.
Typical applications include connected sensor nodes, compact data loggers, medical monitoring equipment, industrial control modules, USB-connected portable devices, and human-interface systems with an LCD. In each case, the 512 KB Flash capacity accommodates a bootloader and embedded application, while SRAM supports working memory, protocol stacks, display buffers, and real-time control tasks.
PCB design should account for the fine BGA pitch, ball assignment, exposed-pad or thermal requirements, and the placement of decoupling capacitors. Confirm the complete pin list, recommended land pattern, power-supply topology, and decoupling values in the STM32L476QE manufacturer datasheet before routing the PCB or assigning ball functions.
This page consolidates the confirmed core, memory, package, interface, and sourcing characteristics into an engineering-focused product record. It also provides application guidance, selection criteria, design considerations, and a package-aware comparison framework for engineers evaluating the STM32L476QEI6 against other Arm Cortex-M4 microcontrollers.
के लिए ड्रॉप-इन विकल्प STM32L476QEI6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंSTM32L476QEI6 Maximum Ratings और Electrical Characteristics
| Product Type | Ultra-low-power 32-bit microcontroller |
| Processor Core | Arm Cortex-M4, 32-bit RISC |
| Maximum Core Frequency | 80 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Arithmetic Unit | Hardware floating-point unit |
| Operating Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| USB Interface | USB OTG |
| Display Support | LCD interface support |
| पैकेज | 132-pin UFBGA, 7 x 7 mm |
| पिन काउंट | 132 pins |
| माउंटिंग प्रकार | Surface mount |
| Delivery Packaging | Tray |
| Program Memory Organization | 512K x 8 bits |
| Core Architecture | Arm Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
STM32L476QEI6 132-pin ufbga, 7 x 7 mm पिन कॉन्फ़िगरेशन गाइड
STM32L476QEI6 (132-pin ufbga, 7 x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32L476QEI6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32L476QEI6 के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Power IoT Sensor Nodes, USB Portable Data Loggers, Medical Monitoring Devices, Industrial Control Modules, LCD Human-Interface Panels, Battery-Powered Handheld Instruments.
Low-Power IoT Sensor Nodes
The STM32L476QEI6 fits compact wireless sensor nodes that combine local signal conditioning with intermittent network activity. Its 80 MHz Arm Cortex-M4 core provides enough performance for protocol handling, sensor fusion, and local data processing, while the 512 KB Flash and 128 KB SRAM accommodate firmware, configuration, and communication buffers. The 132-UFBGA package reduces board area to a 7 x 7 mm footprint. In a battery-powered design, firmware should enter the appropriate STM32L4 low-power mode between samples, disable unused peripherals, and use the LCD and USB blocks only when required. The principal engineering benefit is integration: a connected sensor node can combine sensing, control, display support, and USB service functions without using several discrete controllers on a crowded board.
अनुशंसित
USB Portable Data Loggers
The STM32L476QEI6 is well suited to portable data loggers that collect sensor information and periodically transfer it over USB. Its 80 MHz Cortex-M4 processor can handle acquisition tasks, file formatting, background processing, and USB device control, while the hardware floating-point unit accelerates numeric operations without relying exclusively on software floating-point routines. The 512 KB Flash provides storage for firmware and local configuration, and 128 KB SRAM supports working buffers. Its 1.8 V, 2.5 V, or 3.3 V operating choices simplify integration with portable power systems. Designers should implement USB data-routing and power-control circuitry according to the reference design, and should validate connector ESD protection and battery charging independently of the MCU.
अनुशंसित
Medical Monitoring Devices
The STM32L476QEI6 can serve as the central controller in compact medical monitoring equipment where signal acquisition, display presentation, data logging, and USB connectivity must coexist on a small board. Its 80 MHz Cortex-M4 core supports deterministic control of sensors and processing of acquired data, while the hardware FPU accelerates filtering and calibration calculations. The 512 KB Flash and 128 KB SRAM provide a practical split between firmware and working memory. The 132-UFBGA footprint limits board area but requires fine-pitch PCB construction and careful decoupling. For medical equipment, engineers must separately address applicable product requirements, electrical isolation, patient protection, EMC testing, and software validation rather than treating MCU certifications as system approval.
अनुशंसित
Industrial Control Modules
The STM32L476QEI6 is appropriate for compact industrial control modules that need responsive deterministic processing without the footprint of a larger microcontroller package. At up to 80 MHz, the Cortex-M4 core can execute motor or machine supervisory logic, communication protocols, and state-machine functions. Its 128 KB SRAM supports working memory and interface buffers, while 512 KB Flash accommodates application and update code. The 7 x 7 mm UFBGA package is valuable in DIN-rail, sensor-hub, and distributed controller designs where board space is limited. Industrial implementations should verify the exact temperature limits, ESD tolerance, transient immunity, and peripheral availability from the manufacturer documentation. The internal oscillator, external clock strategy, reset design, and watchdog usage should be selected to match each module's control and safety requirements.
अनुशंसित
LCD Human-Interface Panels
The STM32L476QEI6 is suitable for compact LCD human-interface panels because it combines an 80 MHz Cortex-M4 core with LCD interface support in a dense 132-UFBGA package. The processor can manage display refresh, touch or keypad input, local state, communications, and USB service functions. Its 128 KB of SRAM can hold display and input buffers, while 512 KB of Flash provides room for the interface application, graphics resources, and bootloader. The 7 x 7 mm device footprint helps reduce panel electronics size. Layout engineers should allocate clean routing for the LCD interface, maintain appropriate supply decoupling, and use the manufacturer pin definitions to avoid conflicts between display signals, USB, debug functions, and alternate peripheral assignments.
अनुशंसित
Battery-Powered Handheld Instruments
The STM32L476QEI6 fits battery-powered handheld instruments that combine responsive user control with low standby consumption. The ultra-low-power STM32L4 architecture supports efficient operation between user interactions, while the Cortex-M4 core can process measurements, control an LCD, maintain communications, and manage USB connectivity. Operating voltages of 1.8 V, 2.5 V, and 3.3 V allow the MCU to be paired with different low-voltage power trees. Its 7 x 7 mm UFBGA package helps reduce instrument size, although assembly and repairability require specialized board processes. Designers should optimize runtime by selecting the appropriate sleep state, clocking peripherals only when required, batching sensor acquisitions, and using the LCD controller only during active display periods. Battery protection remains a separate system-level design requirement.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32L476QEI6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | STMicroelectronics |
| Package | 132-pin UFBGA, 7 x 7 mm |
| Processor Core | Arm Cortex-M4, 32-bit RISC |
| Maximum Frequency | 80 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Floating-Point Support | Hardware FPU |
| Operating Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| USB Interface | USB OTG |
| Delivery Packaging | Tray |
मुख्य विशेषताएँ
- High integration in a compact 7 x 7 mm footprint (बनामGeneric larger-package Cortex-M4 MCU)
- Substantial memory for a low-power MCU (बनामSmaller Cortex-M0 or Cortex-M3-class devices)
- Multiple low-voltage supply options (बनामFixed 3.3 V microcontroller designs)
डिज़ाइन नोट्स
Design the 132-UFBGA layout directly from the manufacturer land-pattern and pin-description tables. Place the required supply capacitors close to their assigned power balls, provide a continuous low-impedance supply plane, and route high-speed or sensitive interfaces with short return paths. Because this is a fine-pitch BGA, confirm assembly capability, via-in-pad strategy, solder-mask design, and inspection access before releasing the PCB for production.
Choose the internal or external clocking arrangement and power modes only after reviewing the STM32L476QE datasheet. Supply 1.8 V, 2.5 V, or 3.3 V according to the exact configuration, and avoid enabling peripherals or debug functions that increase current draw in low-power products. For battery applications, measure the complete sleep, wake, acquisition, and communications cycle rather than estimating runtime from the processor clock alone.
Keep USB routing and LCD interface signals away from noisy switching nodes and high-current return paths. Follow the manufacturer reference layout for USB data impedance, clock source placement, decoupling, reset, and boot configuration. Do not assign USB, display, debug, or peripheral functions until all 132 balls and alternate-function options have been checked against the exact ordering code and firmware requirements.
Do not treat a generic STM32L4 board diagram or another STM32L476 package as a direct footprint reference. Ball assignment, exposed-pad requirements, supported peripherals, and operating limits can differ by ordering code. Likewise, a Cortex-M4 competitor with similar clock speed is not a drop-in replacement unless its package, ball functions, electrical limits, memory map, and required peripherals are intentionally compatible and independently verified.
अनुपालन जानकारी
Compliance declarations are not stated in the product information and must be checked against the manufacturer declaration or product documentation for the exact ordering code.