STMicroelectronics

STM32L476QEI6 - 80MHz 512KB Cortex-M4 MCU | STMicroelectronics

MPN: STM32L476QEI6 ✓ Aktif
1.8 V, 2.5 V, and 3.3 V Vdss 132-pin UFBGA, 7 x 7 mm Package 80 MHz Speed 512 KB Memory
MOQ: 1 |

STM32L476QEI6 Genel Bakış

STMicroelectronics STM32L476QEI6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor operating up to 80 MHz, with 512 KB of Flash memory, 128 KB of SRAM, and a 132-pin UFBGA package measuring 7 x 7 mm. The device supports 1.8 V, 2.5 V, and 3.3 V operation, integrates an FPU, USB OTG, and LCD-oriented interfaces, and combines embedded-system performance with low-power design capabilities.

An ultra-low-power microcontroller is an embedded semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby operation. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, Arm Cortex-M microcontroller, and low-power system-on-chip. This combination makes the STM32L476QEI6 suitable for compact systems where processing capability, peripheral integration, board area, and battery life must be balanced.

Principal features include an 80 MHz Arm Cortex-M4 core with hardware floating-point support, 512 KB of programmable Flash, and 128 KB of SRAM. The 132-UFBGA package provides a dense 7 x 7 mm footprint for space-constrained designs. USB OTG and LCD support reduce the need for external interface controllers, while operation from 1.8 V, 2.5 V, and 3.3 V supplies allows integration with common low-voltage system rails.

The Cortex-M4 architecture provides a 32-bit instruction set, deterministic interrupt handling, and efficient execution of control, communications, and signal-processing firmware. A hardware FPU accelerates floating-point calculations without relying entirely on software emulation. Integrated low-power modes are important in applications that spend substantial time idle, while the dense package supports wearable, portable, and embedded industrial products without requiring a large communications processor.

Typical applications include connected sensor nodes, compact data loggers, medical monitoring equipment, industrial control modules, USB-connected portable devices, and human-interface systems with an LCD. In each case, the 512 KB Flash capacity accommodates a bootloader and embedded application, while SRAM supports working memory, protocol stacks, display buffers, and real-time control tasks.

PCB design should account for the fine BGA pitch, ball assignment, exposed-pad or thermal requirements, and the placement of decoupling capacitors. Confirm the complete pin list, recommended land pattern, power-supply topology, and decoupling values in the STM32L476QE manufacturer datasheet before routing the PCB or assigning ball functions.

This page consolidates the confirmed core, memory, package, interface, and sourcing characteristics into an engineering-focused product record. It also provides application guidance, selection criteria, design considerations, and a package-aware comparison framework for engineers evaluating the STM32L476QEI6 against other Arm Cortex-M4 microcontrollers.

Drop-in alternatifler için STM32L476QEI6 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

STM32L476QEI6 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Ultra-low-power 32-bit microcontroller
Processor Core Arm Cortex-M4, 32-bit RISC
Maximum Core Frequency 80 MHz
Flash Memory 512 KB
SRAM 128 KB
Arithmetic Unit Hardware floating-point unit
Operating Supply Voltages 1.8 V, 2.5 V, and 3.3 V
USB Interface USB OTG
Display Support LCD interface support
Paket 132-pin UFBGA, 7 x 7 mm
Pin Sayısı 132 pins
Montaj Türü Surface mount
Delivery Packaging Tray
Program Memory Organization 512K x 8 bits
Core Architecture Arm Cortex-M4
Maximum CPU Frequency 80 MHz

STM32L476QEI6 132-pin ufbga, 7 x 7 mm Pin Yapısı Kılavuzu

STM32L476QEI6 (132-pin ufbga, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

132-pin ufbga, 7 x 7 mm paket pin çizelgesi için STM32L476QEI6

Ayrıntılı pin çıkış verisi mevcut değil: STM32L476QEI6.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

STM32L476QEI6 için uygundur 6 uygulamas: Low-Power IoT Sensor Nodes, USB Portable Data Loggers, Medical Monitoring Devices, Industrial Control Modules, LCD Human-Interface Panels, Battery-Powered Handheld Instruments.

🧩

Low-Power IoT Sensor Nodes

The STM32L476QEI6 fits compact wireless sensor nodes that combine local signal conditioning with intermittent network activity. Its 80 MHz Arm Cortex-M4 core provides enough performance for protocol handling, sensor fusion, and local data processing, while the 512 KB Flash and 128 KB SRAM accommodate firmware, configuration, and communication buffers. The 132-UFBGA package reduces board area to a 7 x 7 mm footprint. In a battery-powered design, firmware should enter the appropriate STM32L4 low-power mode between samples, disable unused peripherals, and use the LCD and USB blocks only when required. The principal engineering benefit is integration: a connected sensor node can combine sensing, control, display support, and USB service functions without using several discrete controllers on a crowded board.

📱

USB Portable Data Loggers

The STM32L476QEI6 is well suited to portable data loggers that collect sensor information and periodically transfer it over USB. Its 80 MHz Cortex-M4 processor can handle acquisition tasks, file formatting, background processing, and USB device control, while the hardware floating-point unit accelerates numeric operations without relying exclusively on software floating-point routines. The 512 KB Flash provides storage for firmware and local configuration, and 128 KB SRAM supports working buffers. Its 1.8 V, 2.5 V, or 3.3 V operating choices simplify integration with portable power systems. Designers should implement USB data-routing and power-control circuitry according to the reference design, and should validate connector ESD protection and battery charging independently of the MCU.

💊

Medical Monitoring Devices

The STM32L476QEI6 can serve as the central controller in compact medical monitoring equipment where signal acquisition, display presentation, data logging, and USB connectivity must coexist on a small board. Its 80 MHz Cortex-M4 core supports deterministic control of sensors and processing of acquired data, while the hardware FPU accelerates filtering and calibration calculations. The 512 KB Flash and 128 KB SRAM provide a practical split between firmware and working memory. The 132-UFBGA footprint limits board area but requires fine-pitch PCB construction and careful decoupling. For medical equipment, engineers must separately address applicable product requirements, electrical isolation, patient protection, EMC testing, and software validation rather than treating MCU certifications as system approval.

🏭

Industrial Control Modules

The STM32L476QEI6 is appropriate for compact industrial control modules that need responsive deterministic processing without the footprint of a larger microcontroller package. At up to 80 MHz, the Cortex-M4 core can execute motor or machine supervisory logic, communication protocols, and state-machine functions. Its 128 KB SRAM supports working memory and interface buffers, while 512 KB Flash accommodates application and update code. The 7 x 7 mm UFBGA package is valuable in DIN-rail, sensor-hub, and distributed controller designs where board space is limited. Industrial implementations should verify the exact temperature limits, ESD tolerance, transient immunity, and peripheral availability from the manufacturer documentation. The internal oscillator, external clock strategy, reset design, and watchdog usage should be selected to match each module's control and safety requirements.

📺

LCD Human-Interface Panels

The STM32L476QEI6 is suitable for compact LCD human-interface panels because it combines an 80 MHz Cortex-M4 core with LCD interface support in a dense 132-UFBGA package. The processor can manage display refresh, touch or keypad input, local state, communications, and USB service functions. Its 128 KB of SRAM can hold display and input buffers, while 512 KB of Flash provides room for the interface application, graphics resources, and bootloader. The 7 x 7 mm device footprint helps reduce panel electronics size. Layout engineers should allocate clean routing for the LCD interface, maintain appropriate supply decoupling, and use the manufacturer pin definitions to avoid conflicts between display signals, USB, debug functions, and alternate peripheral assignments.

🔧

Battery-Powered Handheld Instruments

The STM32L476QEI6 fits battery-powered handheld instruments that combine responsive user control with low standby consumption. The ultra-low-power STM32L4 architecture supports efficient operation between user interactions, while the Cortex-M4 core can process measurements, control an LCD, maintain communications, and manage USB connectivity. Operating voltages of 1.8 V, 2.5 V, and 3.3 V allow the MCU to be paired with different low-voltage power trees. Its 7 x 7 mm UFBGA package helps reduce instrument size, although assembly and repairability require specialized board processes. Designers should optimize runtime by selecting the appropriate sleep state, clocking peripherals only when required, batching sensor acquisitions, and using the LCD controller only during active display periods. Battery protection remains a separate system-level design requirement.

What are the key specifications of STM32L476QEI6 that engineers should know?
The STM32L476QEI6 integrates a 32-bit Arm Cortex-M4 core operating up to 80 MHz, 512 KB of Flash memory, 128 KB of SRAM, and a hardware floating-point unit in a 132-pin 7 x 7 mm UFBGA package. According to the STMicroelectronics STM32L476QE product page, the device is an ultra-low-power MCU that supports 1.8 V, 2.5 V, and 3.3 V operation. Its USB OTG and LCD support make it useful in portable, connected, and human-interface products.
What is the operating voltage of STM32L476QEI6?
The STM32L476QEI6 supports 1.8 V, 2.5 V, and 3.3 V operating supply voltages. These values are identified in the STM32L476QEI6 distributor specifications and the STMicroelectronics STM32L476QE product documentation. When designing the power tree, account for voltage tolerances, sequencing requirements, and the decoupling network specified by the manufacturer datasheet rather than assuming that every peripheral can operate from every rail without restriction.
How much Flash and SRAM does STM32L476QEI6 contain?
The STM32L476QEI6 contains 512 KB of Flash memory and 128 KB of SRAM. The Flash is organized as 512K x 8 bits, providing space for application firmware, a bootloader, configuration data, and update logic. The SRAM can accommodate working memory, interrupt and communications buffers, and control-loop data. According to the STMicroelectronics STM32L476QE product family documentation, the MCU also provides a hardware floating-point unit for efficient numeric processing.
What is the processor core and maximum frequency of STM32L476QEI6?
The STM32L476QEI6 uses a 32-bit Arm Cortex-M4 RISC core with a maximum operating frequency of 80 MHz. The Cortex-M4 core includes a hardware floating-point unit, making it appropriate for real-time control, communications, and moderate signal-processing workloads. The STMicroelectronics STM32L476QE product page identifies the Cortex-M4 core and its 80 MHz maximum operating frequency.
Where can I download the STM32L476QEI6 datasheet and find its pinout?
The official STM32L476QE product page at st.com provides access to the family documentation, while the STM32L476QEI6 distributor listing links to datasheet resources and package information. Use the manufacturer datasheet pin-description table and land-pattern guidance to assign every one of the 132 UFBGA balls. Do not infer ball functions from a generic STM32L4 diagram because peripheral assignments and alternate functions must match the exact ordering code.
What package and pin count does STM32L476QEI6 use?
The STM32L476QEI6 is supplied in a 132-pin UFBGA package measuring 7 x 7 mm. The STMicroelectronics family page identifies the STM32L476xx as an ultra-low-power Arm Cortex-M4 MCU family, while distributor specifications identify the exact 132-UFBGA package. Its dense surface-mount footprint supports compact products but requires careful PCB layout, fine-pitch assembly, adequate escape routing, and thermal-aware via placement.
Where can I buy STM32L476QEI6 and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for STM32L476QEI6. The exact ordering code includes the 132-pin UFBGA package and tray delivery configuration, so the quote should identify STM32L476QEI6 exactly. Distributor listings also confirm broad market availability, but current commercial terms should be confirmed through the form for the quantity and packaging you require.
What is the price of STM32L476QEI6?
The current commercial terms for STM32L476QEI6 are available through the Request a Quote form on this page. Pricing depends on order quantity, packaging, production volume, and current inventory. The component is identified as a 132-UFBGA, 7 x 7 mm tray configuration, so a quote should preserve the complete MPN to avoid receiving a device with a different package or delivery format.
What is the lead time and stock status for STM32L476QEI6?
Request the current lead time and stock status for STM32L476QEI6 through the Request a Quote form on this page. The component is actively marketed by STMicroelectronics and appears in current distributor catalogs, but available quantity can change with demand and manufacturing cycles. Include your required quantity, target date, and acceptance of the 132-UFBGA tray configuration when requesting a firm delivery commitment.
Is STM32L476QEI6 suitable for low-power sensor and IoT devices?
The STM32L476QEI6 is suitable for low-power sensor and IoT products because it combines an 80 MHz Cortex-M4 processor with the STM32L4 family's ultra-low-power operating modes. Its 512 KB Flash and 128 KB SRAM provide room for firmware, protocol stacks, and data buffers, while the 7 x 7 mm UFBGA package limits board area. Final battery-life performance depends on the selected sleep mode, peripheral activity, and firmware duty cycle.
Can STM32L476QEI6 be used in a USB-connected portable device?
Yes, the STM32L476QEI6 can support USB-connected portable designs because the device includes USB OTG support. Its 80 MHz Cortex-M4 core can manage device control, communications, and user-interface tasks, while low-voltage operation supports integration into compact battery-powered products. The design must implement the required USB data routing, power management, impedance matching, and connector protection according to the manufacturer reference design.
What is the difference between STM32L476QEI6 and STM32F103VEH6?
STM32L476QEI6 is an ultra-low-power Arm Cortex-M4 MCU rated up to 80 MHz with 512 KB Flash, 128 KB SRAM, and a 132-UFBGA package. The comparison listing identifies STM32F103VEH6 as a 32-bit Cortex-M3 MCU with 512 KB Flash in a 100-BGA package. Their core performance, power architecture, package, and peripheral mix differ, so they are not pin-compatible drop-in replacements.
When should I choose STM32L476QEI6 over a generic Cortex-M4 microcontroller?
Choose the STM32L476QEI6 when a design needs an 80 MHz Cortex-M4 core, 512 KB Flash, 128 KB SRAM, USB OTG, LCD support, and a compact 7 x 7 mm UFBGA footprint. Its low-power positioning is particularly valuable for battery-operated sensors and portable products. Select a generic Cortex-M4 device instead when its package, memory, supply range, peripheral set, qualification, or long-term availability aligns more closely with the product requirements.
What can replace STM32L476QEI6?
A genuine drop-in replacement must use the same 132-UFBGA footprint, preserve the ball assignments and peripheral functions, and remain within the critical electrical and memory constraints. No verified pin-identical substitute is identified for the STM32L476QEI6, and changing only the processor name is not sufficient. If sourcing risk must be reduced, compare complete STM32L476 orderable variants and candidate Cortex-M4 devices at the package, pin, memory, voltage, clock, and peripheral level before approving a substitution.
Is there an STM32L476QEI6 equivalent from another manufacturer?
No verified cross-manufacturer drop-in equivalent is established for the STM32L476QEI6. Although other Arm Cortex-M4 microcontrollers can provide similar processing capability, a cross-brand alternative cannot be treated as pin-compatible without identical or intentionally interchangeable UFBGA ball assignments. The replacement should be checked against the manufacturer pin table, electrical limits, clock architecture, memory requirements, USB and LCD peripherals, firmware dependencies, and qualification requirements.
Is STM32L476QEI6 the same as STM32F103VEH6?
No, STM32L476QEI6 and STM32F103VEH6 are not the same device. STM32L476QEI6 uses an Arm Cortex-M4 core, reaches 80 MHz, targets ultra-low-power operation, and is packaged in 132-UFBGA. STM32F103VEH6 uses a Cortex-M3 core and is listed in a 100-BGA package. The differing cores, packages, and peripheral organizations prevent direct drop-in substitution.

Mühendislik referans verileri: STM32L476QEI6 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the STM32L476QEI6 when a compact, low-power design needs more processing capability than an entry-level Cortex-M MCU. Its 80 MHz Cortex-M4 core, hardware FPU, 512 KB Flash, 128 KB SRAM, USB OTG, and LCD support make it appropriate for connected instruments, sensor nodes, portable equipment, and industrial control modules. The 132-UFBGA package is beneficial where PCB area is critical, but it requires fine-pitch assembly expertise and careful layout execution. Do not select a generic Cortex-M4 substitute solely by core frequency. Any sourcing alternative must be checked against the exact 132-UFBGA ball pattern, assigned peripherals, voltage limits, memory requirements, USB and LCD functions, clocking, and software dependencies. If a drop-in second source is mandatory, maintain that requirement early in the design because the STM32L476QEI6 footprint does not have a verified pin-identical substitute.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand STMicroelectronics
Package 132-pin UFBGA, 7 x 7 mm
Processor Core Arm Cortex-M4, 32-bit RISC
Maximum Frequency 80 MHz
Flash Memory 512 KB
SRAM 128 KB
Floating-Point Support Hardware FPU
Operating Supply Voltages 1.8 V, 2.5 V, and 3.3 V
USB Interface USB OTG
Delivery Packaging Tray

Ana Farklılayıcılar

  • High integration in a compact 7 x 7 mm footprint (karşılaştırma:Generic larger-package Cortex-M4 MCU)
  • Substantial memory for a low-power MCU (karşılaştırma:Smaller Cortex-M0 or Cortex-M3-class devices)
  • Multiple low-voltage supply options (karşılaştırma:Fixed 3.3 V microcontroller designs)

Tasarım Notları

Design the 132-UFBGA layout directly from the manufacturer land-pattern and pin-description tables. Place the required supply capacitors close to their assigned power balls, provide a continuous low-impedance supply plane, and route high-speed or sensitive interfaces with short return paths. Because this is a fine-pitch BGA, confirm assembly capability, via-in-pad strategy, solder-mask design, and inspection access before releasing the PCB for production.

Choose the internal or external clocking arrangement and power modes only after reviewing the STM32L476QE datasheet. Supply 1.8 V, 2.5 V, or 3.3 V according to the exact configuration, and avoid enabling peripherals or debug functions that increase current draw in low-power products. For battery applications, measure the complete sleep, wake, acquisition, and communications cycle rather than estimating runtime from the processor clock alone.

Keep USB routing and LCD interface signals away from noisy switching nodes and high-current return paths. Follow the manufacturer reference layout for USB data impedance, clock source placement, decoupling, reset, and boot configuration. Do not assign USB, display, debug, or peripheral functions until all 132 balls and alternate-function options have been checked against the exact ordering code and firmware requirements.

Do not treat a generic STM32L4 board diagram or another STM32L476 package as a direct footprint reference. Ball assignment, exposed-pad requirements, supported peripherals, and operating limits can differ by ordering code. Likewise, a Cortex-M4 competitor with similar clock speed is not a drop-in replacement unless its package, ball functions, electrical limits, memory map, and required peripherals are intentionally compatible and independently verified.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance declarations are not stated in the product information and must be checked against the manufacturer declaration or product documentation for the exact ordering code.

Veri doğrulanma tarihi: 2026-11-14 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

STM32L476QEI6 STM32L476QEI6 datasheet STM32L476QEI6 datasheet pdf STM32L476QEI6 pinout STM32L476QEI6 footprint STM32L476QEI6 price STM32L476QEI6 stock STM32L476QEI6 equivalent STM32L476QEI6 replacement STMicroelectronics STM32L476QEI6 STM32L476QEI6 80MHz 512KB STM32L476QEI6 USB OTG STM32L476QEI6 low power sensor STM32L476QEI6 132 UFBGA STM32L476QEI6 vs STM32F103VEH6

İlgili Bileşenler ve Terimler

STMicroelectronics STM32L476QEI6 STM32L476QE STM32F103VEH6 STM32G474QET6TR Arm Cortex-M4 32-bit RISC core ultra-low-power microcontroller embedded processor microcontroller semiconductor hardware floating-point unit USB OTG LCD interface 132-UFBGA UFBGA package family surface mount 7 x 7 mm package 1.8 V operation 2.5 V operation 3.3 V operation Flash memory SRAM STM32L4 family low-power mode
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle