STMicroelectronics

STM8S903K3T3CTR - 16MHz 8-Bit MCU | STMicroelectronics | Embedded Control

MPN: STM8S903K3T3CTR ✓ सक्रिय
2.95 V to 5.5 V Vdss 32-pin LQFP (7 mm x 7 mm) Package 16 MHz Speed 8 Kbytes (8K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

STM8S903K3T3CTR अवलोकन

The STMicroelectronics STM8S903K3T3CTR is an 8-bit STM8S-series microcontroller with a 16 MHz CPU, 8 Kbytes of Flash program memory, 1 Kbyte of RAM, and 640 bytes of EEPROM in a 32-pin LQFP package. The device is suited to compact embedded-control systems that require integrated analog conversion and common serial interfaces without a high pin count.

An 8-bit microcontroller is a compact computing device that integrates a processor core, program memory, data memory, and peripherals on one semiconductor die. Within the broader embedded-control hierarchy, the STM8S903K3 belongs to the STM8 access-line family of 8-bit microcontrollers, combining an economical processor architecture with factory-programmable Flash, integrated data EEPROM, and dedicated communication peripherals.

Key features include a maximum 16 MHz clock, 8 Kbytes of Flash, 1 Kbyte of RAM, 640 bytes of true EEPROM, a 10-bit analog-to-digital converter, two timers, UART, SPI, and I²C. The 2.95 V to 5.5 V operating-voltage range supports both 3.3 V and 5 V system designs, while 16 I/O ports provide useful connectivity in a 7 mm by 7 mm LQFP package.

The STM8S903K3/F3 architecture is positioned as a low-density STM8S device, balancing processing capability with low system complexity. Its EEPROM allows frequently changed parameters to be retained in nonvolatile memory, while the ADC and serial interfaces support mixed analog and digital designs. Firmware can use the STM8S microcontroller reference manual RM0016 for register-level programming and peripheral configuration.

Typical applications include compact motor-control modules, industrial sensor nodes, appliance controllers, instrumentation interfaces, low-cost communication equipment, and small consumer products. The combination of 16 I/O ports, three common serial interfaces, and a 10-bit ADC allows the MCU to supervise sensors, operate display or communication peripherals, and manage discrete control functions on a single board.

Designers should verify the 2.95 V minimum supply requirement, provide the decoupling and programming interface specified by the manufacturer, and confirm pin assignments before routing the 32-LQFP footprint. Firmware compatibility, interrupt behavior, and analog accuracy must also be reviewed when changing between STM8S device variants.

This page combines the STM8S903K3 electrical characteristics, same-package family alternatives, interface-focused application guidance, and practical replacement considerations to support component selection, firmware planning, PCB layout, and sourcing decisions.

के लिए ड्रॉप-इन विकल्प STM8S903K3T3CTR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM8S903K3T3CTR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Flash Program Memory, Package, Serial Interfaces, I/O Port Count, Data EEPROM.

STMicroelectronics
Flash Program Memory: 8 KB
Package: 32-LQFP (7 x 7 mm)
Serial Interfaces: 1 UART, 1 SPI, 1 I2C
इसके साथ तुलना करें STM8S903K3T3CTR →
STMicroelectronics
Flash Program Memory: 8 KB
Package: 32-LQFP, 7 x 7 mm
Data EEPROM: Integrated true EEPROM
इसके साथ तुलना करें STM8S903K3T3CTR →
STMicroelectronics
Flash Program Memory: 8 KB (8K x 8)
Serial Interfaces: UART, SPI, and I2C
I/O Port Count: 28 I/O lines
इसके साथ तुलना करें STM8S903K3T3CTR →
STMicroelectronics
Flash Program Memory: 16 KB
Package: 32-pin LQFP
Serial Interfaces: UART, SPI, I2C, LIN
इसके साथ तुलना करें STM8S903K3T3CTR →

STM8S103K3T3CTR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
STMicroelectronics
📦 32-pin LQFP (7 mm x 7 mm)
8-bit microcontroller · STM8S103 access line · 16 MHz · 8 KB · 1 KB · Integrated true EEPROM · 2.95 V to 5.5 V · 16 ports

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM8S003K3T6CTR

✅ ड्रॉप-इन
STMicroelectronics
📦 32-pin LQFP (7 mm x 7 mm)
8-bit value-line microcontroller · 16 MHz · 8 KB · 8K x 8 · 128 bytes · 10 bits · 3 timers · 1 UART, 1 SPI, 1 I2C

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM8S103K3T6CTR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
STMicroelectronics
📦 32-pin LQFP (7 mm x 7 mm)
8-bit microcontroller · STM8S access line · 16 MHz · 8 KB (8K x 8) · 640 x 8 bits · 10 bits · 4 channels · 3 timers

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM8S105K4T6CTR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
STMicroelectronics
📦 32-pin LQFP (7 mm x 7 mm)
8-bit microcontroller · STM8S Access Line · 16 MHz · 16 KB · 2 KB · 1 KB · 10-bit · 7 channels

कीमत के लिए संपर्क करें

डेटाशीट देखें →

STM8S903K3T3CTR Maximum Ratings और Electrical Characteristics

Product Type 8-bit microcontroller
Product Series STM8S access line
अधिकतम क्लॉक फ़्रीक्वेंसी 16 MHz
Flash Program Memory 8 Kbytes (8K x 8)
RAM 1 Kbyte
EEPROM 640 bytes
ADC Resolution 10 bits
Timer Count 2 timers
Serial Interfaces UART, SPI, and I²C
I/O Port Count 16 ports
ऑपरेटिंग सप्लाई वोल्टेज 2.95 V to 5.5 V
पैकेज 32-pin LQFP (7 mm x 7 mm)
माउंटिंग प्रकार Surface mount
Shipping Format Tape and reel
लाइफसाइकिल स्थिति Active
RoHS स्थिति Compliant
Program Memory Type Flash
Core Architecture 8-bit CISC

STM8S903K3T3CTR 32-pin lqfp (7 mm x 7 mm) पिन कॉन्फ़िगरेशन गाइड

STM8S903K3T3CTR (32-pin lqfp (7 mm x 7 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

STM8S903K3T3CTR के लिए 32-pin lqfp (7 mm x 7 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM8S903K3T3CTR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

STM8S903K3T3CTR के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Node, Compact Motor Controller, Appliance Control Panel, Communications Interface Module, Portable Measurement Device, LED Lighting Controller.

🏭

Industrial Sensor Node

The STM8S903K3T3CTR fits a compact sensor node because its 10-bit ADC can digitize analog inputs while 16 I/O ports handle switches, alarm outputs, and status indicators. The 16 MHz 8-bit processor provides local filtering and control, and the 640-byte EEPROM can retain calibration values or configuration identifiers between power cycles. UART, SPI, and I²C support connection to a transceiver, memory, or upstream controller without requiring a large external peripheral set. The design should verify the ADC input range, reference accuracy, and pin assignment for each analog channel.

⚡

Compact Motor Controller

The STM8S903K3T3CTR can manage a small motor-control or actuator subsystem using its two timers for timing and PWM-related functions, subject to the exact timer capabilities in the device documentation. Sixteen I/O ports provide control and sensing connections, while the 2.95 V to 5.5 V supply range supports 3.3 V logic systems. The MCU does not replace a dedicated power stage, so motor current, flyback protection, and ground separation must be handled by suitable external circuitry. Firmware should include stall, timeout, and thermal-safety responses.

🔧

Appliance Control Panel

The STM8S903K3T3CTR is well suited to appliance control panels because it combines 8 Kbytes of Flash, 1 Kbyte of RAM, and EEPROM in one 8-bit device. Its 16 I/O ports can operate buttons, relays, indicators, and discrete sensors, while UART or I²C can connect a display, temperature sensor, or communications module. The 32-pin LQFP package supports compact board layouts. Firmware should define startup states, debounce timing, relay interlocks, and EEPROM write endurance limits appropriate to the product workload.

🌐

Communications Interface Module

The STM8S903K3T3CTR can serve as the protocol controller in a small communications module using its UART, SPI, or I²C interface. The 16 MHz clock supports interrupt-driven byte and packet processing, while 1 Kbyte of RAM provides working space for short buffers and state machines. Flash stores the protocol firmware, and EEPROM can preserve calibration or addressing information. Interface voltage levels, timing margin, bus loading, and isolation requirements should be checked independently because the MCU operates from 2.95 V to 5.5 V.

📱

Portable Measurement Device

The STM8S903K3T3CTR supports portable measurement products where low power, compactness, and mixed-signal control are important. Its 10-bit ADC is suitable for basic process or sensor measurements, while EEPROM retains calibration constants and the 16 I/O ports support controls and indicators. The 2.95 V minimum operating voltage accommodates low-voltage designs, although the complete measurement accuracy depends on the reference circuit, analog front end, sensor, and calibration method. Use the device's low-power modes only after validating wake timing and peripheral state retention.

💡

LED Lighting Controller

The STM8S903K3T3CTR can coordinate an LED lighting board where a compact controller needs timers, status outputs, and external communication. Its two timers support timing functions, and 16 I/O ports can drive logic-level control signals, button inputs, or fault indicators. UART, SPI, or I²C can connect a lighting controller, color sensor, or configuration interface. High LED current must remain outside the MCU supply limits, and transistor or MOSFET drivers, current limiting, thermal monitoring, and polarity protection must be implemented separately.

What are the key specifications of STM8S903K3T3CTR that engineers should know?
The STM8S903K3T3CTR combines a 16 MHz 8-bit core with 8 Kbytes of Flash, 1 Kbyte of RAM, and 640 bytes of EEPROM in a 32-pin LQFP package. It also provides a 10-bit ADC, two timers, UART, SPI, and I²C interfaces. According to the STMicroelectronics STM8S903K3 datasheet, the device operates from 2.95 V to 5.5 V and exposes 16 I/O ports, making it suitable for compact embedded-control and sensor-interface designs.
What is the operating voltage of STM8S903K3T3CTR?
The STM8S903K3T3CTR operates from 2.95 V to 5.5 V. According to the STMicroelectronics STM8S903K3 datasheet, this range supports 3.3 V and 5 V equipment, although the system must maintain the supply within the specified limits during startup, transients, and maximum processor activity. Decoupling and clock-integration circuits should be designed around the same voltage range.
How much memory does STM8S903K3T3CTR have?
The STM8S903K3T3CTR includes 8 Kbytes of Flash program memory, 1 Kbyte of RAM, and 640 bytes of nonvolatile EEPROM. According to the STMicroelectronics STM8S903K3 datasheet, Flash supports firmware storage, RAM supports working variables and stack operations, and the integrated EEPROM can retain configuration or calibration data without an external memory component.
Where can I download the STM8S903K3T3CTR datasheet PDF?
The official STM8S903K3T3CTR datasheet PDF is available from the STMicroelectronics resource link for the STM8S903K3 and STM8S903F3 families. According to STMicroelectronics, the document covers the 16 MHz STM8S 8-bit MCU with up to 8 Kbytes of Flash, 1 Kbyte of RAM, 640 bytes of EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C. Use the manufacturer document for final pin, electrical, and timing information.
Where is the STM8S903K3T3CTR pinout located?
The STM8S903K3T3CTR pinout is documented in the pin-description and package drawings contained in the STMicroelectronics STM8S903K3 datasheet. The device uses a 32-pin LQFP package, so all 32 physical pins and their alternate-function assignments must be checked against that document before PCB routing. Do not infer pin functions solely from another STM8S model, even when it uses the same package.
Is STM8S903K3T3CTR suitable for ADC-based sensor designs?
Yes, the STM8S903K3T3CTR is suitable for compact analog sensor designs because it integrates a 10-bit ADC, 16 I/O ports, and a 16 MHz processor. According to the STMicroelectronics datasheet, the MCU also supports UART, SPI, and I²C for communicating with external sensors, converters, and memories. Analog input range, sampling time, reference stability, and the selected analog pin should be verified before committing the PCB layout.
Where can I buy STM8S903K3T3CTR online?
The STM8S903K3T3CTR can be requested through the “Request a Quote” form on this page. The form is the appropriate route for checking current unit availability, order quantities, and lead time without relying on a static listing. The exact ordering code is STM8S903K3T3CTR, and its tape-and-reel presentation should be confirmed with the quotation.
What is the current price of STM8S903K3T3CTR?
Use the “Request a Quote” form on this page for the current STM8S903K3T3CTR price and available quantity breaks. The request should identify the exact 32-pin LQFP ordering code and tape-and-reel format. A quote request is necessary because component pricing and inventory can change rapidly and depend on order volume and delivery schedule.
What is the lead time for STM8S903K3T3CTR?
The current lead time for STM8S903K3T3CTR should be requested through the “Request a Quote” form on this page. Include the required quantity, target delivery date, and whether multiple reels are acceptable. The manufacturer lists the STM8S903K3 family as active, but an active lifecycle designation does not by itself guarantee a fixed lead time for every order quantity.
Is STM8S903K3T3CTR currently in stock?
Current inventory for STM8S903K3T3CTR is handled through the “Request a Quote” form on this page. State the required order quantity and delivery schedule so the response reflects current availability rather than an outdated catalog record. The manufacturer identifies the STM8S903K3 family as active, but project scheduling should rely on a confirmed quotation and production schedule.
STM8S903K3T3CTR vs STM8S103K3T3CTR: which is better for a mixed-signal controller?
The STM8S903K3T3CTR is preferable when true EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C in a 32-pin LQFP are the required baseline. The STM8S103K3T3CTR belongs to the same STM8 family and package class, but its timer and peripheral mix should be compared with the intended firmware. According to the STMicroelectronics product documentation, both are 16 MHz STM8S devices, so selection should emphasize peripherals, memory, qualification, and application requirements.
What is the difference between STM8S903K3T3CTR and STM8S003K3T6CTR?
The main differences involve temperature grade and the broader peripheral set rather than the basic 16 MHz, 8 Kbyte Flash, and 32-pin LQFP architecture. The STM8S003K3T6CTR is a lower-cost STM8 access-line option, while the STM8S903K3T3CTR provides the documented 640-byte EEPROM, 10-bit ADC, two timers, UART, SPI, and I²C feature set. Verify every used peripheral and temperature requirement before treating either device as interchangeable.
When should I choose STM8S903K3T3CTR over an STM8S003K3T6CTR?
Choose STM8S903K3T3CTR when the design depends on its documented combination of 640-byte EEPROM, 10-bit ADC, two timers, UART, SPI, and I²C. The STM8S003K3T6CTR can be considered for a constrained application that only uses the peripherals supported by that device and accepts its different qualification and temperature characteristics. Because both use a 32-pin LQFP class package, physical reuse alone is not enough; pin functions and firmware must also match.
Is STM8S903K3T3CTR suitable for industrial sensor and control modules?
The STM8S903K3T3CTR is suitable for compact industrial sensor and control modules that operate from 3.3 V or 5 V and need mixed analog and digital functions. Its 10-bit ADC, 16 I/O ports, EEPROM, and three serial interfaces support local sensing, configuration storage, and upstream communication. According to the STMicroelectronics datasheet, the device is active and RoHS compliant; site-specific environmental and EMC requirements still need separate qualification.
What can replace STM8S903K3T3CTR?
The closest same-package STM8-family options are STM8S003K3T6CTR, STM8S103K3T3CTR, STM8S103K3T6CTR, and STM8S105K4T6CTR, subject to peripheral and qualification checks. The STM8S903K3T3CTR provides 8 Kbytes of Flash, 1 Kbyte of RAM, 640 bytes of EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C in a 32-pin LQFP. A replacement must match the physical footprint, pin functions, electrical limits, and required firmware behavior.
What is the best cross-brand equivalent for STM8S903K3T3CTR?
No cross-brand drop-in equivalent is established for the STM8S903K3T3CTR. The searched comparison results did not identify a competing 32-LQFP device with verified pin compatibility, 16 MHz operation, 8 Kbyte Flash, 1 Kbyte RAM, and the required STM8 peripheral set. A similarly packaged 8-bit microcontroller should not be treated as a drop-in replacement unless its complete pinout, memory map, interrupt behavior, and peripheral implementation are independently validated.

के लिए इंजीनियरिंग संदर्भ डेटा STM8S903K3T3CTR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the STM8S903K3T3CTR when a design needs a compact 16 MHz STM8 controller with 8 Kbytes of Flash, 1 Kbyte of RAM, 640 bytes of EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C. The STM8S103K3T3CTR is the closest option when its timer and peripheral configuration satisfies the application while retaining a similar 8-bit architecture and package. Consider STM8S003K3T6CTR when its reduced peripheral set and temperature grade meet the design, but validate every required function. STM8S105K4T6CTR is useful when the PCB can accept the same LQFP footprint and the design benefits from twice the Flash capacity. No cross-brand device should be treated as a direct replacement without independent pin, electrical, and firmware validation.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद STM8S103K3T3CTR STM8S003K3T6CTR STM8S103K3T6CTR STM8S105K4T6CTR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 32-pin LQFP (7 mm x 7 mm) 32-pin LQFP (7 mm x 7 mm) 32-pin LQFP (7 mm x 7 mm) 32-pin LQFP (7 mm x 7 mm) 32-pin LQFP (7 mm x 7 mm)
CPU Architecture 8-bit 8-bit 8-bit 8-bit 8-bit
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
Flash Program Memory 8 Kbytes 8 Kbytes 8 Kbytes 8 Kbytes 16 Kbytes
RAM 1 Kbyte 1 Kbyte 1 Kbyte 1 Kbyte 1 Kbyte

मुख्य विशेषताएँ

  • Documented integration of true EEPROM with mixed-signal and serial peripherals (बनामSTM8S003K3T6CTR)
  • Close functional match within the STM8S103 family (बनामSTM8S103K3T3CTR)
  • Same 32-pin footprint with expanded Flash storage (बनामSTM8S105K4T6CTR)

डिज़ाइन नोट्स

Keep the STM8S903K3T3CTR supply inside its 2.95 V to 5.5 V operating range and account for transient margin around clock startup and peripheral activity. Place the manufacturer's recommended decoupling capacitors close to the supply and ground pins, use a short return path, and keep analog and switching-current loops compact. Because the MCU supports both 3.3 V and 5 V systems, verify every connected peripheral's logic levels before using the same board variant.

Assign the 32-LQFP footprint only after checking the complete STM8S903K3 pin-description table, including alternate-function, reset, clock, programming, ground, and supply pins. Maintain the manufacturer-defined clearances and land pattern, and avoid routing high-current switching paths beneath the device. Confirm that the board's exposed assembly constraints accommodate the 7 mm by 7 mm package and its lead pitch before committing to the PCB footprint.

Do not treat another STM8S controller as a drop-in device solely because it uses a 32-pin LQFP package. Check pin multiplexing, ADC channels, timer outputs, UART locations, SPI and I²C pins, clock options, reset behavior, programming signals, memory size, and firmware startup assumptions. A replacement may require a different initialization sequence even when the PCB outline and several headline specifications are the same.

Route SPI, I²C, UART, and ADC signals away from switching nodes and high-current return paths, using continuous ground references beneath the relevant circuitry. For analog measurements, keep the ADC input trace short, isolate it from digital switching activity, and follow the datasheet recommendations for the analog supply and reference arrangement. The 10-bit converter's useful accuracy depends on reference stability and PCB cleanliness as well as the converter itself.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance is identified for the STM8S903K3T3CTR. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification claims are established by the cited product information.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

STM8S903K3T3CTR datasheet STM8S903K3T3CTR specifications STM8S903K3T3CTR pinout STM8S903K3T3CTR datasheet pdf STM8S903K3T3CTR replacement STM8S903K3T3CTR equivalent STM8S903K3T3CTR footprint STM8S903K3T3CTR application circuit STM8S903K3T3CTR price STM8S903K3T3CTR stock STMicroelectronics STM8S903K3T3CTR STM8S903K3T3CTR vs STM8S103K3T3CTR

संबंधित कंपोनेंट्स और शब्द

STMicroelectronics STM8S903K3T3CTR STM8S903K3 STM8S903F3M3TR STM8S103K3T3CTR STM8S103K3T6CTR STM8S003K3T6CTR STM8S105K4T6CTR STM8S 8-bit microcontroller CISC microcontroller embedded controller semiconductor 10-bit ADC UART SPI I²C EEPROM Flash memory RAM timer 32-pin LQFP LQFP package family surface-mount package SMD RoHS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें