SY89529LTH - 200 MHz LVPECL Clock Synthesizer | Microchip
MPN: SY89529LTH ✗ जीवन की समाप्तिSY89529LTH अवलोकन
A clock synthesizer is a timing IC that generates or distributes clock signals according to a defined frequency and phase relationship. In this case, the SY89529LTH combines a phase-locked loop with a crystal input and LVPECL output. LVPECL is a differential, Emitter-Coupled Logic signaling standard commonly used in high-speed communications, test equipment, servers, and data-center clock trees. The device is therefore positioned within the hierarchy of clock and timing ICs, oscillator circuits, frequency synthesizers, and power-management-dependent semiconductor systems.
The principal documented characteristics include a 200 MHz maximum frequency, a 3.3 V supply, a PLL, a crystal reference input, LVPECL outputs, and one clock-synthesis circuit. Spread-spectrum clocking can reduce electromagnetic interference peaks by distributing clock energy across a frequency band. This is useful where reducing narrowband emissions is more important than requiring a perfectly fixed output frequency. The 32-TQFP package provides a surface-mount implementation, but its exposed thermal and routing requirements must be assessed against the manufacturer's layout guidance.
At the architectural level, the synthesizer locks its internally generated clock to the crystal reference through the PLL. The resulting differential clock supports high-speed backplane, processor, networking, and instrumentation clock trees. Because the output is LVPECL, receiver termination, trace impedance, and common-mode voltage must be engineered carefully. Accurate clock amplitude and deterministic jitter performance are especially important when the device supplies timing to high-speed serial links, although exact jitter, output-count, divider, and reference-input details must be confirmed from the manufacturer datasheet.
Typical applications include telecommunications equipment, network-interface clocking, server and storage systems, test-and-measurement instrumentation, and industrial control electronics. In each case, the crystal reference establishes the stable frequency source while the PLL generates the required clock waveform. The 200 MHz ceiling makes the part relevant to systems operating below or around that frequency rather than ultra-high-rate optical or memory interfaces requiring much higher clock rates.
A critical design step is to follow the manufacturer pin-description and reference-circuit tables when assigning crystal, supply, ground, and LVPECL connections. Keep the crystal loop compact, provide the required bypass capacitance, maintain controlled differential impedance, and terminate LVPECL inputs as specified by the receiving circuit. Confirm worst-case startup, jitter, output amplitude, supply sensitivity, and temperature behavior before releasing a production design.
This page consolidates the documented clock-generator characteristics, lifecycle information, sourcing details, package mapping, design guidance, and verified drop-in comparison context. It also distinguishes the exact bulk MPN from tape-and-reel order codes and identifies technical details that require confirmation from the manufacturer datasheet before layout or qualification.
के लिए ड्रॉप-इन विकल्प SY89529LTH — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
SY89529LZH-TR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
SY89529LTH विशेषताएं
| Product Type | Clock/Frequency Synthesizer IC |
| Maximum Frequency | 200 MHz |
| सप्लाई वोल्टेज | 3.3 V |
| Number of Circuits | 1 clock-synthesizer circuit |
| PLL | Yes |
| Reference Input | Crystal input |
| आउटपुट प्रकार | LVPECL |
| Clocking Technology | Precision spread-spectrum clock synthesis |
| पैकेज | 32-TQFP |
| माउंटिंग प्रकार | Surface mount |
| ऑपरेटिंग तापमान | 0 °C to 85 °C |
| Product Series | Precision Edge |
| लाइफसाइकिल स्थिति | Obsolete |
| Manufacturer | Microchip Technology |
| Original Manufacturer | Micrel Semiconductor |
SY89529LTH 32-tqfp पिन कॉन्फ़िगरेशन गाइड
SY89529LTH (32-tqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY89529LTH.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
SY89529LTH के लिए उपयुक्त है 6 अनुप्रयोगs: Telecommunications Clock Distribution, Network Interface Clocking, Server and Storage Timing, Test and Measurement Instrumentation, Industrial Control Electronics, High-Speed Backplane Distribution.
Telecommunications Clock Distribution
The SY89529LTH fits telecommunications equipment that requires a reference-derived LVPECL clock at or below 200 MHz. Its PLL and crystal input allow a stable reference to generate a distributed clock for line cards, interface processors, or backplane transceivers. The spread-spectrum feature distributes energy over a frequency range, which can reduce narrowband EMI peaks in densely populated cabinets. The 3.3 V architecture and 32-TQFP package support compact surface-mount designs, provided each LVPECL pair is routed with controlled impedance and correct receiver termination.
Network Interface Clocking
The SY89529LTH can supply a differential clock to network-interface, switching, and line-card circuitry when the required rate does not exceed 200 MHz. A crystal reference establishes the source frequency, while the PLL produces the clock used by downstream digital logic and serial interfaces. Spread-spectrum operation is useful where reducing concentrated EMI emissions is valuable. Board-level validation should include input-output phase behavior, LVPECL amplitude, jitter margin, reference startup time, and termination compatibility with the selected receiver.
Server and Storage Timing
The SY89529LTH is applicable to legacy server, storage, and data-center timing trees that operate from a crystal reference and consume LVPECL clock signals up to 200 MHz. The device provides one clock-synthesizer circuit rather than a multi-output clock tree, so designers should account for downstream distribution and fanout. Spread-spectrum clocking can moderate narrowband emissions, while the obsolete lifecycle status requires careful availability and long-term support planning before use in a new platform.
Test and Measurement Instrumentation
The SY89529LTH can provide a stable differential clock reference in instruments that synchronize converters, digitizers, or communication modules. The 200 MHz maximum frequency covers many acquisition and signal-generation subsystems, while the PLL permits clock generation from a crystal rather than an external variable reference. For laboratory equipment, preserve short crystal connections, controlled LVPECL routing, and adequate decoupling. Timing accuracy must be assessed from the manufacturer jitter and reference specifications rather than inferred from maximum frequency alone.
Industrial Control Electronics
The SY89529LTH is suitable for industrial control boards that need a compact spread-spectrum clock source for high-speed digital sections, fieldbus transceivers, or communication modules. Its 0 °C to 85 °C operating range covers many commercial and industrial environments, although extended-temperature requirements need a different part. The 3.3 V supply and 32-TQFP package simplify integration with mixed-signal boards. Use the reference circuit and pinout to control oscillator stability, output impedance, and EMI behavior.
High-Speed Backplane Distribution
The SY89529LTH can seed a 200 MHz-class backplane clock tree in legacy communications equipment using LVPECL interconnects. One synthesizer circuit may drive several buffers or fanout devices, but each branch must preserve the intended amplitude, impedance, and termination network. Spread-spectrum clock generation can reduce narrowband interference along shared chassis environments. The design must account for accumulated jitter, branch skew, connector and via discontinuities, and the receiver's LVPECL threshold before the clock is distributed across multiple loads.
के लिए इंजीनियरिंग संदर्भ डेटा SY89529LTH — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | SY89529LZH-TR |
|---|---|---|
| Package | 32-TQFP | 32-TQFP |
| Brand | Microchip Technology | Microchip Technology |
| Lifecycle Status | Obsolete | Obsolete |
मुख्य विशेषताएँ
- Legacy-system clocking with spread-spectrum output (बनामSY89529LZH-TR)
- Single-circuit 32-TQFP implementation (बनामSY89529LZH-TR)
- Defined commercial operating range (बनामSY89529LZH-TR)
डिज़ाइन नोट्स
Place the crystal and its load capacitors directly beside the crystal pins, and reproduce the reference network in the manufacturer datasheet. Keep the oscillator loop short and route it away from LVPECL outputs and switching-power nodes. A compact crystal loop reduces parasitic loading and sensitivity to adjacent high-speed signals, which is especially important when the clock supplies a system with narrow timing margins.
Route LVPECL outputs as controlled-impedance differential pairs with a continuous reference plane and no unterminated stubs. Apply the termination arrangement specified for the receiving device rather than assuming a generic value. Confirm receiver voltage thresholds, trace length, pair-to-pair skew, and connector transitions in simulation or measurement because the SY89529LTH is intended to operate up to 200 MHz.
Decouple the 3.3 V supply locally at the device and follow the datasheet's recommended capacitance and placement. Keep switching-regulator and high-current paths away from the crystal and clock outputs. Validate supply sensitivity, startup behavior, and output stability over the required 0 °C to 85 °C operating range, especially when spread-spectrum modulation causes frequency to move away from the nominal clock frequency.
Do not treat SY89529LTH and SY89529LTH-TR as different electrical devices solely from the suffix; the distinction is principally the order packaging. Before replacing an obsolete part, verify the exact pin functions, temperature grade, reference frequency, output configuration, enable behavior, and electrical limits. A package match alone is insufficient evidence that a substitute will preserve system timing and LVPECL interoperability.
अनुपालन जानकारी
The available manufacturer and distributor results do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. AEC-Q100 is not applicable because this is a clock synthesizer rather than an automotive-qualified device category.