Microchip Technology

SY89529LTH - 200 MHz LVPECL Clock Synthesizer | Microchip

MPN: SY89529LTH ✗ Akhir Hayat
3.3 V Vdss 32-TQFP Package 200 MHz Speed
MOQ: 1 |

SY89529LTH Ringkasan

Microchip SY89529LTH is a 3.3 V precision spread-spectrum clock synthesizer with a maximum operating frequency of 200 MHz, one synthesizer circuit, PLL capability, crystal input, and LVPECL output in a 32-TQFP package. The device belongs to the Precision Edge clock-generation family and is designed for systems requiring a stable, low-jitter clock derived from a crystal reference.

A clock synthesizer is a timing IC that generates or distributes clock signals according to a defined frequency and phase relationship. In this case, the SY89529LTH combines a phase-locked loop with a crystal input and LVPECL output. LVPECL is a differential, Emitter-Coupled Logic signaling standard commonly used in high-speed communications, test equipment, servers, and data-center clock trees. The device is therefore positioned within the hierarchy of clock and timing ICs, oscillator circuits, frequency synthesizers, and power-management-dependent semiconductor systems.

The principal documented characteristics include a 200 MHz maximum frequency, a 3.3 V supply, a PLL, a crystal reference input, LVPECL outputs, and one clock-synthesis circuit. Spread-spectrum clocking can reduce electromagnetic interference peaks by distributing clock energy across a frequency band. This is useful where reducing narrowband emissions is more important than requiring a perfectly fixed output frequency. The 32-TQFP package provides a surface-mount implementation, but its exposed thermal and routing requirements must be assessed against the manufacturer's layout guidance.

At the architectural level, the synthesizer locks its internally generated clock to the crystal reference through the PLL. The resulting differential clock supports high-speed backplane, processor, networking, and instrumentation clock trees. Because the output is LVPECL, receiver termination, trace impedance, and common-mode voltage must be engineered carefully. Accurate clock amplitude and deterministic jitter performance are especially important when the device supplies timing to high-speed serial links, although exact jitter, output-count, divider, and reference-input details must be confirmed from the manufacturer datasheet.

Typical applications include telecommunications equipment, network-interface clocking, server and storage systems, test-and-measurement instrumentation, and industrial control electronics. In each case, the crystal reference establishes the stable frequency source while the PLL generates the required clock waveform. The 200 MHz ceiling makes the part relevant to systems operating below or around that frequency rather than ultra-high-rate optical or memory interfaces requiring much higher clock rates.

A critical design step is to follow the manufacturer pin-description and reference-circuit tables when assigning crystal, supply, ground, and LVPECL connections. Keep the crystal loop compact, provide the required bypass capacitance, maintain controlled differential impedance, and terminate LVPECL inputs as specified by the receiving circuit. Confirm worst-case startup, jitter, output amplitude, supply sensitivity, and temperature behavior before releasing a production design.

This page consolidates the documented clock-generator characteristics, lifecycle information, sourcing details, package mapping, design guidance, and verified drop-in comparison context. It also distinguishes the exact bulk MPN from tape-and-reel order codes and identifies technical details that require confirmation from the manufacturer datasheet before layout or qualification.

Pilihan pengganti yang segera untuk SY89529LTH — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

SY89529LZH-TR

✅ Masuk Drop-In
📦 32-TQFP
Maximum frequency is 200 MHz for both devices, a 0% difference; both are listed as obsolete clock/frequency synthesizers

📋 Alternatif rujukan (tidak dalam katalog)

SY89529LTH Spesifikasi

Product Type Clock/Frequency Synthesizer IC
Maximum Frequency 200 MHz
Tegangan Pemberi Arus 3.3 V
Number of Circuits 1 clock-synthesizer circuit
PLL Yes
Reference Input Crystal input
Jenis Output LVPECL
Clocking Technology Precision spread-spectrum clock synthesis
Kemasan 32-TQFP
Jenis Pemasangan Surface mount
Suhu Operasi 0 °C to 85 °C
Product Series Precision Edge
Status Lingkungan Hidup Obsolete
Manufacturer Microchip Technology
Original Manufacturer Micrel Semiconductor

Panduan Konfigurasi Pin SY89529LTH 32-tqfp

Konfigurasi pin untuk SY89529LTH (32-tqfp pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 32-tqfp untuk SY89529LTH

Tiada data garisan pin yang diperoleh untuk SY89529LTH.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

SY89529LTH patut untuk 6 aplikasis: Telecommunications Clock Distribution, Network Interface Clocking, Server and Storage Timing, Test and Measurement Instrumentation, Industrial Control Electronics, High-Speed Backplane Distribution.

🌐

Telecommunications Clock Distribution

The SY89529LTH fits telecommunications equipment that requires a reference-derived LVPECL clock at or below 200 MHz. Its PLL and crystal input allow a stable reference to generate a distributed clock for line cards, interface processors, or backplane transceivers. The spread-spectrum feature distributes energy over a frequency range, which can reduce narrowband EMI peaks in densely populated cabinets. The 3.3 V architecture and 32-TQFP package support compact surface-mount designs, provided each LVPECL pair is routed with controlled impedance and correct receiver termination.

🌐

Network Interface Clocking

The SY89529LTH can supply a differential clock to network-interface, switching, and line-card circuitry when the required rate does not exceed 200 MHz. A crystal reference establishes the source frequency, while the PLL produces the clock used by downstream digital logic and serial interfaces. Spread-spectrum operation is useful where reducing concentrated EMI emissions is valuable. Board-level validation should include input-output phase behavior, LVPECL amplitude, jitter margin, reference startup time, and termination compatibility with the selected receiver.

🖥️

Server and Storage Timing

The SY89529LTH is applicable to legacy server, storage, and data-center timing trees that operate from a crystal reference and consume LVPECL clock signals up to 200 MHz. The device provides one clock-synthesizer circuit rather than a multi-output clock tree, so designers should account for downstream distribution and fanout. Spread-spectrum clocking can moderate narrowband emissions, while the obsolete lifecycle status requires careful availability and long-term support planning before use in a new platform.

🔧

Test and Measurement Instrumentation

The SY89529LTH can provide a stable differential clock reference in instruments that synchronize converters, digitizers, or communication modules. The 200 MHz maximum frequency covers many acquisition and signal-generation subsystems, while the PLL permits clock generation from a crystal rather than an external variable reference. For laboratory equipment, preserve short crystal connections, controlled LVPECL routing, and adequate decoupling. Timing accuracy must be assessed from the manufacturer jitter and reference specifications rather than inferred from maximum frequency alone.

🏭

Industrial Control Electronics

The SY89529LTH is suitable for industrial control boards that need a compact spread-spectrum clock source for high-speed digital sections, fieldbus transceivers, or communication modules. Its 0 °C to 85 °C operating range covers many commercial and industrial environments, although extended-temperature requirements need a different part. The 3.3 V supply and 32-TQFP package simplify integration with mixed-signal boards. Use the reference circuit and pinout to control oscillator stability, output impedance, and EMI behavior.

🔧

High-Speed Backplane Distribution

The SY89529LTH can seed a 200 MHz-class backplane clock tree in legacy communications equipment using LVPECL interconnects. One synthesizer circuit may drive several buffers or fanout devices, but each branch must preserve the intended amplitude, impedance, and termination network. Spread-spectrum clock generation can reduce narrowband interference along shared chassis environments. The design must account for accumulated jitter, branch skew, connector and via discontinuities, and the receiver's LVPECL threshold before the clock is distributed across multiple loads.

What is the SY89529LTH and what are its key specifications?
The SY89529LTH is a Microchip 3.3 V precision spread-spectrum clock synthesizer that operates up to 200 MHz and provides one LVPECL clock-generation circuit with PLL and crystal-reference capability. According to the manufacturer datasheet listing, the device is packaged in 32-TQFP and belongs to the Precision Edge series. These characteristics make it applicable to high-speed communications, networking, server clocking, and test-equipment systems requiring a reference-derived differential clock.
Where can I download the SY89529LTH datasheet PDF?
The SY89529LTH datasheet PDF is available through the linked datasheet page on AllDataSheet, which identifies the document as an 11-page Micrel Semiconductor publication. The document describes the device as a 3.3 V, 200 MHz precision spread-spectrum clock synthesizer. Use the manufacturer's pin-description and application tables for final PCB design, while the linked copy is suitable for technical review of the legacy Micrel documentation.
Where can I find the SY89529LTH pinout?
The SY89529LTH pinout is identified in the manufacturer datasheet and corresponds to the 32-TQFP package drawing, including the clock inputs, LVPECL outputs, supply connections, grounds, crystal connections, and exposed thermal pad. The web results confirm the 32-pin TQFP package but do not expose a reliable individual pin-number table. Use the datasheet pin-description table when assigning PCB tracks and do not infer pad functions from the package outline alone.
What is the difference between the SY89529LTH and SY89529LTH-TR?
The SY89529LTH and SY89529LTH-TR identify the same 200 MHz LVPECL clock-synthesizer function, but their order suffixes represent different packing configurations. The cross-reference results explicitly identify SY89529LTH-TR as tape and reel, while SY89529LTH is listed as the bulk product. When substituting these identifiers, preserve the clock, electrical, and package requirements rather than treating the packing suffix as a functional difference.
What is the SY89529LTH versus SY89529LZH-TR and can one replace the other?
The SY89529LZH-TR and SY89529LTH are related Microchip Precision Edge clock generators, and the published comparison identifies both as obsolete clock/frequency synthesizers in the tape-and-reel or bulk ordering categories shown in the result. Their exact electrical and temperature grades should be checked before replacement. Do not approve a substitution until the pin assignments, maximum frequency, supply voltage, output standard, and environmental ratings have been compared in the manufacturer documentation.
When should I choose the SY89529LTH over another clock synthesizer?
Choose the SY89529LTH when a legacy 32-TQFP design requires a 3.3 V, 200 MHz maximum-frequency PLL synthesizer with crystal reference and LVPECL output. The device is especially relevant when an existing board was designed around the Microchip Precision Edge footprint and spread-spectrum clocking is acceptable. For new designs, first verify lifecycle availability, exact jitter requirements, output count, reference frequency, and the availability of an active successor.
Is the SY89529LTH suitable for a high-speed communications clock tree?
The SY89529LTH can suit a communications clock tree when the required frequency is 200 MHz or lower, the board uses LVPECL clocking, and a crystal reference is acceptable. Its 3.3 V architecture, PLL, and precision spread-spectrum synthesis are appropriate for systems distributing a reference-derived clock. Exact suitability depends on receiver voltage thresholds, differential impedance, jitter, output amplitude, and total clock-tree loading, which must be verified from the datasheet.
What are the key specifications of SY89529LTH that engineers should know?
The key SY89529LTH specifications are a 3.3 V supply, 200 MHz maximum operating frequency, one clock-synthesizer circuit, PLL operation, crystal reference input, and LVPECL output in a 32-TQFP package. The device is listed as obsolete and operates from 0 °C to 85 °C. Its spread-spectrum operation is useful for reducing narrowband electromagnetic-emission peaks, while the LVPECL interface requires correct termination and controlled-impedance routing.
What can replace the obsolete SY89529LTH?
The closest documented same-family candidate is the obsolete SY89529LZH-TR, but no fully qualified cross-brand drop-in replacement is established by the available cross-reference results. A practical replacement must match the 32-TQFP footprint, crystal input, 200 MHz maximum frequency, LVPECL output, supply voltage, enable or programming behavior, and environmental requirements. Use the Request a Quote form on this page to ask for sourcing help with the exact obsolete MPN.
Is there a Microchip cross-reference for the SY89529LTH?
Yes, Microchip provides a manufacturer cross-reference search that accepts comparable part numbers and returns suggested products. The search can be started with SY89529LTH at the manufacturer's cross-reference-search page. Because a lifecycle indication alone does not establish pin compatibility, compare the returned candidates against the original 32-TQFP pinout, 3.3 V supply, 200 MHz clock limit, LVPECL interface, and operating-temperature requirements before release.
What is the best cross-brand equivalent for the SY89529LTH?
No cross-brand drop-in equivalent can be confirmed from the available technical results because they do not provide a pin-compatible 32-TQFP part with verified 200 MHz LVPECL operation. A valid substitute must preserve the package footprint, crystal connection, PLL behavior, LVPECL output levels, supply voltage, and timing performance. Do not use a functionally similar clock generator with a different output standard or package without redesigning the board.
How do I design the PCB around the SY89529LTH crystal and LVPECL outputs?
Place the crystal and its load network close to the clock-generator pins, use the reference schematic and capacitor values from the manufacturer datasheet, and keep the oscillator loop compact. Route each LVPECL pair as a controlled-impedance differential pair, provide the specified termination at the receiver, and avoid stubs or test-point structures that increase reflection. Connect the thermal pad according to the package drawing and power-decoupling guidance.
Does the SY89529LTH require special layout for spread-spectrum clocking?
Spread-spectrum clocking changes the frequency distribution around the nominal output frequency, but it does not eliminate the need for disciplined clock routing. The LVPECL differential pairs should still have continuous reference-plane return paths, controlled impedance, appropriate receiver termination, and minimal coupling to unrelated high-speed signals. Confirm the permitted modulation range and jitter impact in the manufacturer documentation before using the output for a particularly strict timing budget.
Is SY89529LTH currently in stock and what is its lead time?
The SY89529LTH is identified as obsolete, and the available results do not establish a current manufacturer stock position or a reliable production lead time. Legacy inventory can vary by quantity and traceability requirements, so use the Request a Quote form on this page with your required quantity, target date, and lot-condition requirements. Do not treat the existence of a distributor product page as confirmation of current availability.
How much does the SY89529LTH cost and where can it be purchased?
The SY89529LTH is an obsolete clock synthesizer, and its commercial terms can vary with quantity, condition, traceability, and delivery requirements. Use the Request a Quote form on this page for the exact MPN and desired quantity. The form is the appropriate route for confirming availability, lead time, and a current quotation without relying on an outdated historical listing value.

Data referensi kejuruteraan untuk SY89529LTH — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the SY89529LTH when maintaining a legacy 32-TQFP board that requires a 3.3 V crystal-referenced PLL clock with LVPECL output and a maximum frequency of 200 MHz. It is particularly appropriate where spread-spectrum clocking helps reduce narrowband EMI and where the obsolete status is acceptable because of long-lived industrial, telecommunications, or test equipment. The SY89529LZH-TR is the only directly documented related candidate, but it is also obsolete and requires a separate review of electrical and temperature details. No cross-brand drop-in replacement is established by the available results, so a functionally similar device with another package or output standard should be treated as a redesign rather than a substitution. For new products, first evaluate an active clock-generator family that meets the required frequency, jitter, reference, output, EMI, and lifecycle requirements.

Perbandingan dengan Gantian

Parametr Produk Ini SY89529LZH-TR
Package 32-TQFP 32-TQFP
Brand Microchip Technology Microchip Technology
Lifecycle Status Obsolete Obsolete

Penyeberangsung Jelas

  • Legacy-system clocking with spread-spectrum output (vsSY89529LZH-TR)
  • Single-circuit 32-TQFP implementation (vsSY89529LZH-TR)
  • Defined commercial operating range (vsSY89529LZH-TR)

Catatan Desain

Place the crystal and its load capacitors directly beside the crystal pins, and reproduce the reference network in the manufacturer datasheet. Keep the oscillator loop short and route it away from LVPECL outputs and switching-power nodes. A compact crystal loop reduces parasitic loading and sensitivity to adjacent high-speed signals, which is especially important when the clock supplies a system with narrow timing margins.

Route LVPECL outputs as controlled-impedance differential pairs with a continuous reference plane and no unterminated stubs. Apply the termination arrangement specified for the receiving device rather than assuming a generic value. Confirm receiver voltage thresholds, trace length, pair-to-pair skew, and connector transitions in simulation or measurement because the SY89529LTH is intended to operate up to 200 MHz.

Decouple the 3.3 V supply locally at the device and follow the datasheet's recommended capacitance and placement. Keep switching-regulator and high-current paths away from the crystal and clock outputs. Validate supply sensitivity, startup behavior, and output stability over the required 0 °C to 85 °C operating range, especially when spread-spectrum modulation causes frequency to move away from the nominal clock frequency.

Do not treat SY89529LTH and SY89529LTH-TR as different electrical devices solely from the suffix; the distinction is principally the order packaging. Before replacing an obsolete part, verify the exact pin functions, temperature grade, reference frequency, output configuration, enable behavior, and electrical limits. A package match alone is insufficient evidence that a substitute will preserve system timing and LVPECL interoperability.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available manufacturer and distributor results do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. AEC-Q100 is not applicable because this is a clock synthesizer rather than an automotive-qualified device category.

Pencarian Berhubungan

SY89529LTH datasheet SY89529LTH pinout SY89529LTH datasheet pdf SY89529LTH equivalent SY89529LTH replacement SY89529LTH cross reference SY89529LTH vs SY89529LZH-TR SY89529LTH price SY89529LTH stock Microchip SY89529LTH SY89529LTH 200MHz LVPECL SY89529LTH 32-TQFP footprint SY89529LTH clock synthesizer SY89529LTH crystal input

Komponen dan Tanda berkaitan

Microchip Technology Micrel Semiconductor SY89529LTH SY89529LTH-TR SY89529LZH-TR Clock synthesizer Clock and timing IC Frequency synthesizer Phase-locked loop PLL LVPECL Crystal oscillator Spread-spectrum clocking 3.3 V clock synthesizer 200 MHz clock 32-TQFP TQFP package family Surface mount SMD Telecommunications equipment Network interface Test and measurement instrumentation Industrial control electronics Clock jitter
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ