Microchip Technology

SY89828LHG - 2:10 1 GHz LVDS Clock Buffer | Microchip

MPN: SY89828LHG ✓ सक्रिय
64-TQFP with exposed pad Package 1 GHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

SY89828LHG अवलोकन

The Microchip Technology SY89828LHG is a 2:10 differential clock fanout buffer with an operating frequency up to 1 GHz, LVDS and PECL input support, LVDS outputs, and a 64-TQFP exposed-pad package. It is designed for high-speed clock distribution and signal translation in systems requiring multiple synchronized differential outputs. The device belongs to the Precision Edge family of clock buffers, drivers, multiplexers, and translators.

A clock fanout buffer is a timing device that receives one differential clock and generates multiple output clocks while preserving frequency, phase relationship, and signal integrity. Clock buffers sit within the hierarchy of clock and timing ICs, where they support clock generation, distribution, translation, and synchronization. The SY89828LHG is particularly relevant where a source clock must be distributed across a PCB or converted between high-speed differential signaling formats.

The 2:10 fanout ratio provides ten differential output clocks from one differential input pair. Its maximum operating frequency of 1 GHz supports demanding digital, communications, and processor-clock environments. The input interface accepts LVDS or PECL signaling, while the output interface uses LVDS, allowing heterogeneous clock-generation logic to connect through a common distribution stage. The manufacturer information identifies the device as a clock fanout buffer, multiplexer, translator, and 1 GHz clock driver.

A key performance characteristic is pin-to-pin skew below 50 ps, according to the Microchip datasheet listing. Low skew helps preserve timing relationships among distributed outputs, which is important when multiple domains launch data or control signals simultaneously. The 64-TQFP exposed-pad package consolidates ten differential outputs into one device, reducing the number of separate buffer packages required for wide fanout clock trees.

Typical uses include high-speed serial-interface clock distribution, processor and FPGA clock trees, telecommunications equipment, test and measurement systems, and communications infrastructure. The device can also support clock-level translation where the upstream generator uses PECL and downstream circuitry expects LVDS. Careful source termination, controlled-impedance routing, and symmetrical output-channel placement remain necessary to preserve signal quality at high data rates.

Designers should treat the differential input and output networks as high-speed interfaces rather than conventional low-frequency clock traces. Route each differential pair on a constant-width, tightly coupled path, provide the required termination, and keep return-path discontinuities away from the clock region. The exposed thermal pad should be connected to the system ground plane according to the package land pattern, while supply and ground connections should be decoupled close to the device.

This product page combines the SY89828LHG operating specifications, package details, sourcing guidance, comparison data, and practical clock-tree design notes. It is intended to help engineers determine whether the device fits a 1 GHz LVDS distribution requirement and how its pinout, translation function, and skew performance should be handled in a production design.

के लिए ड्रॉप-इन विकल्प SY89828LHG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SY89828LHG (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type.

Microchip Technology
Package: 64-pin TQFP with exposed pad
Product Type: Clock fanout buffer, multiplexer, and translator IC
इसके साथ तुलना करें SY89828LHG →

SY89828LHY

✅ ड्रॉप-इन
Microchip Technology
📦 TQFP
Clock fanout buffer, multiplexer, and translator IC · 3.3 V · 1 GHz · Dual 1:10 · 2:1 · 20 LVDS output pairs · 4 differential inputs · LVDS

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SY89828LHG विशेषताएं

Product Type Clock fanout buffer, multiplexer, translator, and clock driver
Fanout Ratio 2:10
Maximum Frequency 1 GHz
Input Signal Type LVDS or PECL differential
Output Signal Type LVDS differential
Number of Differential Outputs 10 outputs
Pin-to-Pin Skew Less than 50 ps
पैकेज 64-TQFP with exposed pad
माउंटिंग प्रकार Surface mount
Product Series Precision Edge
Primary Function Differential clock distribution and translation
Logic Family LVDS and PECL
पिन की संख्या 64 pins

SY89828LHG 64-tqfp with exposed pad पिन कॉन्फ़िगरेशन गाइड

SY89828LHG (64-tqfp with exposed pad पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

SY89828LHG के लिए 64-tqfp with exposed pad पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY89828LHG.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SY89828LHG के लिए उपयुक्त है 6 अनुप्रयोगs: FPGA Multi-Output Clock Trees, High-Speed Processor Clock Distribution, Telecommunications Clock Distribution, PECL-to-LVDS Clock Translation, High-Speed Serial Interface Clocks, Test and Measurement Instrumentation.

🖥️

FPGA Multi-Output Clock Trees

The SY89828LHG fits FPGA clock trees that require one differential source to feed as many as ten destinations at up to 1 GHz. Its 2:10 fanout ratio reduces the number of separate clock-buffer packages required on a dense PCB, while the specified pin-to-pin skew below 50 ps helps maintain predictable relative timing across outputs. The LVDS output interface is suitable for FPGA clock inputs that use differential clocking. Place the device near the clock distribution region, route each pair as a controlled-impedance differential net, and use the manufacturer-recommended terminations. Board designers should still confirm the FPGA’s input threshold, clock jitter tolerance, and maximum supported clock frequency.

🖥️

High-Speed Processor Clock Distribution

The SY89828LHG is useful for distributing a high-speed differential processor or interface clock across up to ten loads without using ten separate buffers. Its maximum operating frequency of 1 GHz accommodates demanding digital clock domains, and skew below 50 ps supports tighter coordination among independently launched channels. LVDS outputs provide a common interface for compatible digital logic. Place the buffer in a central clock fanout area and keep the input and output routes symmetrical to minimize noise and skew variation. Validate the source amplitude, receiver thresholds, reference clock quality, and termination network against the electrical tables before releasing the layout.

🌐

Telecommunications Clock Distribution

Telecommunications line cards and communications modules often need multiple synchronized clock outputs derived from one source. The SY89828LHG provides a 2:10 differential fanout, LVDS outputs, and operation up to 1 GHz in a single 64-TQFP exposed-pad package. This supports centralized clock routing while limiting component spread across the PCB. Differential routing and controlled impedance are essential because any loss or asymmetry between clock branches can degrade edge quality. The exposed pad should be tied into the ground structure according to the land pattern, and each interface should include the prescribed source or destination termination. Timing margin should be evaluated with the jitter budget of the actual clock source and the receivers being driven.

⚡

PECL-to-LVDS Clock Translation

The SY89828LHG fits clock systems where the upstream generator produces PECL but downstream circuits expect LVDS. It accepts differential LVDS or PECL inputs and provides differential LVDS outputs, allowing a single device to combine level translation with one-to-ten clock distribution. This reduces the number of separate translator and fanout stages in the clock path. The design must maintain correct source and receiver termination for both formats and provide adequate clock amplitude at the input. Use the pin-description and electrical tables to confirm every interface connection, and keep the LVDS output routes away from high-current switching nodes to preserve edge quality.

🌐

High-Speed Serial Interface Clocks

The SY89828LHG can distribute a differential reference clock used by multiple high-speed serial interfaces, including links whose data rates exceed the clock frequency because the clock may be multiplied internally. Ten LVDS outputs provide flexible clock routing in compact communications equipment, while the low specified pin-to-pin skew supports consistent launch timing. The 1 GHz maximum operating frequency gives designers substantial clock-rate headroom, but the actual source jitter and receiver requirements determine whether a particular link is suitable. Keep branch lengths controlled, avoid unnecessary stubs, and verify the interface termination values specified by the manufacturer.

🔧

Test and Measurement Instrumentation

The SY89828LHG is appropriate for test and measurement equipment that must distribute a low-skew differential clock to multiple acquisition, conversion, or processing paths. Its 2:10 ratio allows ten LVDS clock outputs at up to 1 GHz from one input, while skew below 50 ps helps maintain channel-to-channel timing relationships. The wide exposed-pad TQFP also simplifies consolidation compared with several single-output buffers. In instrumentation, preserve clean return paths and isolate the clock region from noisy switching stages. Confirm that every receiving instrument accepts the LVDS amplitude and edge rate, and evaluate additive jitter and deterministic distortion at each output rather than relying only on the buffer’s maximum-frequency rating.

What is the SY89828LHG?
The SY89828LHG is a 2:10 differential clock fanout buffer that operates up to 1 GHz and is packaged in a 64-TQFP with an exposed pad. According to Microchip product information, it accepts LVDS or PECL inputs and produces LVDS outputs. Its primary role is to distribute a differential clock while maintaining low pin-to-pin skew across as many as ten differential output pairs.
How many outputs does the SY89828LHG provide?
The SY89828LHG provides ten differential clock outputs from one differential input pair, giving it a 2:10 fanout ratio. Microchip identifies the device as a 2:10 clock fanout buffer, multiplexer, translator, and driver. The wide fanout consolidates clock distribution into one 64-TQFP exposed-pad package instead of requiring several smaller buffer devices.
What is the maximum operating frequency of SY89828LHG?
The SY89828LHG operates at frequencies up to 1 GHz. This maximum frequency makes the device suitable for high-speed clock trees in communications, processor, FPGA, serial-interface, and test-equipment systems. The operating limit is distinct from LVDS data throughput, so system designers should also evaluate the downstream interface signaling rate and timing budget.
Which clock input formats does SY89828LHG accept?
The SY89828LHG accepts differential LVDS or PECL clock inputs and translates them to differential LVDS outputs. According to the Microchip datasheet listing, the input stage supports both LVDS and PECL while the output stage is LVDS. This flexibility allows PECL clock-generation circuits to feed LVDS clock networks through a single distribution device.
Why is pin-to-pin skew important for SY89828LHG?
Low pin-to-pin skew keeps the ten distributed clock outputs more closely aligned, reducing timing uncertainty between circuits driven by different outputs. The Microchip datasheet listing specifies skew below 50 ps. This is especially valuable when several output channels launch data into parallel or tightly coordinated high-speed interfaces within the same system clock domain.
What package does the SY89828LHG use?
The SY89828LHG uses a 64-TQFP package with an exposed pad and is intended for surface-mount assembly. Microchip describes the package as space-saving despite the large number of differential clock outputs. The exposed pad supports heat transfer into the PCB ground structure and must be connected according to the package land pattern.
Where can I download the SY89828LHG datasheet PDF?
The SY89828LHG datasheet PDF is available through the linked Microchip device document and the datasheet listing included on this page. It is the primary source for the complete 64-pin description, recommended input and output terminations, electrical characteristics, supply limits, and package dimensions. Use the pin-description table when assigning PCB nets and checking exposed-pad connections.
Where can I find the SY89828LHG pinout?
The SY89828LHG pin assignment is defined in the manufacturer's pin-description table for the 64-TQFP exposed-pad package. Use that table together with the package drawing because differential clock signals use multiple power, ground, input, and output connections rather than a simple single-ended clock pinout. The exposed pad is a dedicated thermal and electrical connection and should be tied to the designated PCB plane.
Can the SY89828LHY replace the SY89828LHG?
The SY89828LHY is the closest documented drop-in candidate for the SY89828LHG because it uses the same TQFP package and is described as having consistent terminals, performance, and functional characteristics. Before approving the substitution, verify the manufacturer ordering table for temperature-range, lead-finish, or qualification-code differences. The SY89828LHG remains the reference device for the exact purchased configuration.
What is the best Microchip equivalent for SY89828LHG?
The SY89828LHY is the best documented Microchip drop-in candidate because the cross-reference information identifies matching TQFP terminals and consistent performance characteristics. No additional same-package candidates were established from the available technical records. For a new design, confirm the exact input levels, output levels, supply range, pin assignments, and environmental requirements before releasing the substitution.
When should I choose SY89828LHG instead of a smaller clock buffer?
Choose the SY89828LHG when one differential clock must feed ten differential loads and pin-to-pin skew below 50 ps is important. A smaller buffer may be preferable for fewer destinations or lower fanout requirements, but it increases package count and may make synchronized distribution more difficult. The SY89828LHG is the stronger choice for compact, wide-fanout LVDS clock trees operating up to 1 GHz.
Is the SY89828LHG suitable for FPGA and processor clock distribution?
The SY89828LHG is suitable for FPGA and processor clock distribution when the clock interface uses LVDS and the system requires up to ten outputs at up to 1 GHz. Its differential inputs and outputs support common high-speed clocking arrangements, while skew below 50 ps helps preserve relative output timing. The receiving device's input thresholds and clock-quality requirements must still be checked.
What is the expected lead time for SY89828LHG?
Use the Request a Quote form on this page to request the current lead time, minimum order quantity, and stock allocation for SY89828LHG. The product listing identifies the 64-TQFP exposed-pad device, but current contractual delivery timing should be confirmed during quotation. Confirming the exact suffix with the manufacturer helps avoid mismatched package or temperature configurations.
Where can I buy SY89828LHG online?
Submit the SY89828LHG request through the Request a Quote form on this page to obtain current availability, commercial terms, and lead-time confirmation for the exact 64-TQFP exposed-pad ordering code. Quote requests provide a direct path for validating stock, authorized-channel sourcing, and shipment scheduling. Include the target quantity and required delivery date in the request.
What are the key specifications of SY89828LHG that engineers should know?
The key SY89828LHG specifications are a 2:10 fanout ratio, operation up to 1 GHz, LVDS or PECL differential inputs, LVDS differential outputs, ten differential output pairs, pin-to-pin skew below 50 ps, and a 64-TQFP exposed-pad package. These characteristics define its role as a wide-fanout differential clock distributor with input-level translation capability.
How should LVDS clock traces be routed around SY89828LHG?
Route each SY89828LHG differential clock pair on a constant-width, tightly coupled PCB path with a continuous reference plane and the manufacturer-recommended termination. Keep input and output interfaces away from noisy switching-current paths, preserve symmetry between the positive and negative conductors, and avoid stubs. The exposed pad should connect to the designated ground plane to provide both electrical and thermal performance.

के लिए इंजीनियरिंग संदर्भ डेटा SY89828LHG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SY89828LHG when a design needs one differential clock source distributed to ten LVDS loads at frequencies up to 1 GHz, particularly when low pin-to-pin skew is important. Its combination of LVDS/PECL input support, LVDS outputs, and a 2:10 ratio makes it useful for FPGA, processor, serial-interface, and communications clock trees. The SY89828LHY is the documented drop-in candidate when procurement requires another ordering suffix, but its exact temperature, qualification, and electrical details should be checked before substitution. Do not choose a smaller buffer when ten coordinated outputs are required, because distributing the clock across separate devices can increase component count and introduce additional skew. Conversely, use a smaller buffer for low-fanout, low-speed clocking where package area is more important than integrated translation and wide fanout.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SY89828LHY
Package 64-TQFP with exposed pad TQFP, same-package replacement candidate
Brand Microchip Technology Microchip Technology
Device Type 2:10 clock fanout buffer, multiplexer, and translator Clock driver with consistent functional characteristics
Fanout Ratio 2:10 2:10

मुख्य विशेषताएँ

  • Wide differential fanout in one package (बनामSY89828LHY)
  • Integrated clock-level translation (बनामSY89828LHY)
  • Low output-to-output timing offset (बनामSY89828LHY)

डिज़ाइन नोट्स

Treat every differential clock as a controlled-impedance interface. Route the positive and negative conductors as a tightly coupled pair over a continuous reference plane, avoid stubs and plane splits, and apply the manufacturer-recommended termination. Keep the SY89828LHG input and output networks physically separated from noisy power converters because the device can operate to 1 GHz even though its fanout and translation function may suggest ordinary low-frequency clock routing.

Place the SY89828LHG close to the point where clock branches diverge and balance the routing geometry of the ten outputs. Maintain consistent spacing and length relationships where multiple channels must launch together, use adjacent ground references, and avoid routing over split power planes. The exposed pad should be connected to the designated ground plane using the package land pattern, while decoupling connections should return through low-impedance paths.

Do not assume that an LVDS clock is automatically compatible with every receiver. Confirm input voltage thresholds, termination method, clock amplitude, maximum input frequency, and additive jitter for the connected FPGA, processor, converter, or test instrument. Also verify the distinction between LVDS and PECL levels before using the translation inputs; a logic-level mismatch can prevent clock detection even when the board routing looks correct.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SY89828LHG datasheet SY89828LHG pinout SY89828LHG datasheet pdf SY89828LHG equivalent SY89828LHG replacement SY89828LHG cross reference SY89828LHG vs SY89828LHY SY89828LHG 1 GHz clock buffer SY89828LHG 64-TQFP Microchip SY89828LHG SY89828LHG FPGA clock tree SY89828LHG LVDS PECL SY89828LHG price SY89828LHG stock

संबंधित कंपोनेंट्स और शब्द

Microchip Technology SY89828LHG SY89828LHY clock fanout buffer clock buffer clock driver clock translator differential clock LVDS PECL Precision Edge 2:10 fanout 1 GHz pin-to-pin skew less than 50 ps 64-TQFP exposed pad surface mount FPGA clock tree processor clock distribution telecommunications equipment serial interface test and measurement controlled-impedance routing differential termination
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें