SY89828LHG - 2:10 1 GHz LVDS Clock Buffer | Microchip
MPN: SY89828LHG ✓ فعالSY89828LHG نمای کلی
A clock fanout buffer is a timing device that receives one differential clock and generates multiple output clocks while preserving frequency, phase relationship, and signal integrity. Clock buffers sit within the hierarchy of clock and timing ICs, where they support clock generation, distribution, translation, and synchronization. The SY89828LHG is particularly relevant where a source clock must be distributed across a PCB or converted between high-speed differential signaling formats.
The 2:10 fanout ratio provides ten differential output clocks from one differential input pair. Its maximum operating frequency of 1 GHz supports demanding digital, communications, and processor-clock environments. The input interface accepts LVDS or PECL signaling, while the output interface uses LVDS, allowing heterogeneous clock-generation logic to connect through a common distribution stage. The manufacturer information identifies the device as a clock fanout buffer, multiplexer, translator, and 1 GHz clock driver.
A key performance characteristic is pin-to-pin skew below 50 ps, according to the Microchip datasheet listing. Low skew helps preserve timing relationships among distributed outputs, which is important when multiple domains launch data or control signals simultaneously. The 64-TQFP exposed-pad package consolidates ten differential outputs into one device, reducing the number of separate buffer packages required for wide fanout clock trees.
Typical uses include high-speed serial-interface clock distribution, processor and FPGA clock trees, telecommunications equipment, test and measurement systems, and communications infrastructure. The device can also support clock-level translation where the upstream generator uses PECL and downstream circuitry expects LVDS. Careful source termination, controlled-impedance routing, and symmetrical output-channel placement remain necessary to preserve signal quality at high data rates.
Designers should treat the differential input and output networks as high-speed interfaces rather than conventional low-frequency clock traces. Route each differential pair on a constant-width, tightly coupled path, provide the required termination, and keep return-path discontinuities away from the clock region. The exposed thermal pad should be connected to the system ground plane according to the package land pattern, while supply and ground connections should be decoupled close to the device.
This product page combines the SY89828LHG operating specifications, package details, sourcing guidance, comparison data, and practical clock-tree design notes. It is intended to help engineers determine whether the device fits a 1 GHz LVDS distribution requirement and how its pinout, translation function, and skew performance should be handled in a production design.
جایگزینهای drop-in برای SY89828LHG — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای SY89828LHG (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Product Type.
SY89828LHY
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←SY89828LHG مشخصات
| Product Type | Clock fanout buffer, multiplexer, translator, and clock driver |
| Fanout Ratio | 2:10 |
| Maximum Frequency | 1 GHz |
| Input Signal Type | LVDS or PECL differential |
| Output Signal Type | LVDS differential |
| Number of Differential Outputs | 10 outputs |
| Pin-to-Pin Skew | Less than 50 ps |
| بستهبندی | 64-TQFP with exposed pad |
| نوع نصب | Surface mount |
| Product Series | Precision Edge |
| Primary Function | Differential clock distribution and translation |
| Logic Family | LVDS and PECL |
| تعداد پینها | 64 pins |
راهنمای پیکربندی پین SY89828LHG 64-tqfp with exposed pad
پیکربندی پین برای SY89828LHG (پکیج 64-tqfp with exposed pad). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای SY89828LHG.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SY89828LHG مناسب است برای 6 کاربردs: FPGA Multi-Output Clock Trees, High-Speed Processor Clock Distribution, Telecommunications Clock Distribution, PECL-to-LVDS Clock Translation, High-Speed Serial Interface Clocks, Test and Measurement Instrumentation.
FPGA Multi-Output Clock Trees
The SY89828LHG fits FPGA clock trees that require one differential source to feed as many as ten destinations at up to 1 GHz. Its 2:10 fanout ratio reduces the number of separate clock-buffer packages required on a dense PCB, while the specified pin-to-pin skew below 50 ps helps maintain predictable relative timing across outputs. The LVDS output interface is suitable for FPGA clock inputs that use differential clocking. Place the device near the clock distribution region, route each pair as a controlled-impedance differential net, and use the manufacturer-recommended terminations. Board designers should still confirm the FPGA’s input threshold, clock jitter tolerance, and maximum supported clock frequency.
High-Speed Processor Clock Distribution
The SY89828LHG is useful for distributing a high-speed differential processor or interface clock across up to ten loads without using ten separate buffers. Its maximum operating frequency of 1 GHz accommodates demanding digital clock domains, and skew below 50 ps supports tighter coordination among independently launched channels. LVDS outputs provide a common interface for compatible digital logic. Place the buffer in a central clock fanout area and keep the input and output routes symmetrical to minimize noise and skew variation. Validate the source amplitude, receiver thresholds, reference clock quality, and termination network against the electrical tables before releasing the layout.
Telecommunications Clock Distribution
Telecommunications line cards and communications modules often need multiple synchronized clock outputs derived from one source. The SY89828LHG provides a 2:10 differential fanout, LVDS outputs, and operation up to 1 GHz in a single 64-TQFP exposed-pad package. This supports centralized clock routing while limiting component spread across the PCB. Differential routing and controlled impedance are essential because any loss or asymmetry between clock branches can degrade edge quality. The exposed pad should be tied into the ground structure according to the land pattern, and each interface should include the prescribed source or destination termination. Timing margin should be evaluated with the jitter budget of the actual clock source and the receivers being driven.
PECL-to-LVDS Clock Translation
The SY89828LHG fits clock systems where the upstream generator produces PECL but downstream circuits expect LVDS. It accepts differential LVDS or PECL inputs and provides differential LVDS outputs, allowing a single device to combine level translation with one-to-ten clock distribution. This reduces the number of separate translator and fanout stages in the clock path. The design must maintain correct source and receiver termination for both formats and provide adequate clock amplitude at the input. Use the pin-description and electrical tables to confirm every interface connection, and keep the LVDS output routes away from high-current switching nodes to preserve edge quality.
High-Speed Serial Interface Clocks
The SY89828LHG can distribute a differential reference clock used by multiple high-speed serial interfaces, including links whose data rates exceed the clock frequency because the clock may be multiplied internally. Ten LVDS outputs provide flexible clock routing in compact communications equipment, while the low specified pin-to-pin skew supports consistent launch timing. The 1 GHz maximum operating frequency gives designers substantial clock-rate headroom, but the actual source jitter and receiver requirements determine whether a particular link is suitable. Keep branch lengths controlled, avoid unnecessary stubs, and verify the interface termination values specified by the manufacturer.
Test and Measurement Instrumentation
The SY89828LHG is appropriate for test and measurement equipment that must distribute a low-skew differential clock to multiple acquisition, conversion, or processing paths. Its 2:10 ratio allows ten LVDS clock outputs at up to 1 GHz from one input, while skew below 50 ps helps maintain channel-to-channel timing relationships. The wide exposed-pad TQFP also simplifies consolidation compared with several single-output buffers. In instrumentation, preserve clean return paths and isolate the clock region from noisy switching stages. Confirm that every receiving instrument accepts the LVDS amplitude and edge rate, and evaluate additive jitter and deterministic distortion at each output rather than relying only on the buffer’s maximum-frequency rating.
دادههای مرجع مهندسی برای SY89828LHG — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | SY89828LHY |
|---|---|---|
| Package | 64-TQFP with exposed pad | TQFP, same-package replacement candidate |
| Brand | Microchip Technology | Microchip Technology |
| Device Type | 2:10 clock fanout buffer, multiplexer, and translator | Clock driver with consistent functional characteristics |
| Fanout Ratio | 2:10 | 2:10 |
تفاوتهای کلیدی
- Wide differential fanout in one package (در مقابلSY89828LHY)
- Integrated clock-level translation (در مقابلSY89828LHY)
- Low output-to-output timing offset (در مقابلSY89828LHY)
یادداشتهای طراحی
Treat every differential clock as a controlled-impedance interface. Route the positive and negative conductors as a tightly coupled pair over a continuous reference plane, avoid stubs and plane splits, and apply the manufacturer-recommended termination. Keep the SY89828LHG input and output networks physically separated from noisy power converters because the device can operate to 1 GHz even though its fanout and translation function may suggest ordinary low-frequency clock routing.
Place the SY89828LHG close to the point where clock branches diverge and balance the routing geometry of the ten outputs. Maintain consistent spacing and length relationships where multiple channels must launch together, use adjacent ground references, and avoid routing over split power planes. The exposed pad should be connected to the designated ground plane using the package land pattern, while decoupling connections should return through low-impedance paths.
Do not assume that an LVDS clock is automatically compatible with every receiver. Confirm input voltage thresholds, termination method, clock amplitude, maximum input frequency, and additive jitter for the connected FPGA, processor, converter, or test instrument. Also verify the distinction between LVDS and PECL levels before using the translation inputs; a logic-level mismatch can prevent clock detection even when the board routing looks correct.
اطلاعات انطباق
The available product information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this ordering code.