Microchip Technology

SY89873LMI - 2 GHz 1:3 LVDS Clock Fanout | Microchip

MPN: SY89873LMI ✓ सक्रिय
16-VFQFN exposed pad, 16-MLF Package 2 GHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

SY89873LMI अवलोकन

The Microchip Technology SY89873LMI is a 2 GHz clock fanout buffer and divider IC with a 1:3 fanout ratio, LVDS outputs, and support for CML, HSTL, LVDS, and LVPECL inputs. It is packaged in a 16-lead VFQFN exposed-pad, 16-MLF surface-mount package for high-speed clock distribution on compact printed circuit boards.

A clock fanout buffer is a clock-timing semiconductor that receives one differential clock and reproduces it across multiple outputs. Clock and timing ICs form part of the broader digital semiconductor hierarchy, supporting processors, network interfaces, serializers, test equipment, and communication systems. The SY89873LMI’s divider and fanout functions can distribute a common reference signal while limiting loading and maintaining signal integrity.

Key features include a maximum operating frequency of 2 GHz, a 1:3 output configuration, and LVDS clock outputs. The input stage accepts CML, HSTL, LVDS, and LVPECL logic levels, allowing interoperability with common high-speed clock sources. Its 16-VFQFN exposed-pad package supports compact placement while providing a thermal pad for heat dissipation. These characteristics suit systems requiring multiple low-voltage differential clock outputs.

The device combines a clock input stage, fanout and divider circuitry, and three differential output drivers in one integrated package. Differential LVDS output signaling reduces common-mode noise sensitivity and supports reliable propagation across controlled PCB traces. The exposed pad must be connected to the appropriate ground plane according to the manufacturer’s land-pattern and layout instructions, while input and output return paths require short, controlled-impedance routing.

Typical uses include networking and communications equipment, high-speed serial links, clock-tree distribution, data-converter systems, and instrument clocks. It can also serve as a local fanout stage where a system clock must reach several subsystems without loading the oscillator or upstream PLL directly. Configuration, termination, and decoupling details should be selected for the actual clock standard and trace environment.

For reliable deployment, use the manufacturer’s reference layout and pin-description table, provide the input interface with the required termination, and route LVDS pairs as controlled-impedance differential pairs. The exposed ground pad and supply connections should be connected according to the package drawing, with high-frequency return paths kept continuous.

This page consolidates device specifications, sourcing guidance, engineering design notes, application analysis, and a transparent assessment of drop-in alternatives. It helps engineers identify whether the SY89873LMI matches the required clock topology, package, interface standard, and board-level integration constraints.

के लिए ड्रॉप-इन विकल्प SY89873LMI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

SY89873LMI विशेषताएं

Device Type Clock fanout buffer and divider IC
Maximum Frequency 2 GHz
Fanout Ratio 1:3
आउटपुट प्रकार LVDS
Supported Input Logic Levels CML, HSTL, LVDS, LVPECL
आउटपुट कॉन्फ़िगरेशन 1:3 clock fanout
पैकेज 16-VFQFN exposed pad, 16-MLF
माउंटिंग प्रकार Surface mount
Lead Count 16 leads
Exposed Pad Present

SY89873LMI 16-vfqfn exposed pad, 16-mlf पिन कॉन्फ़िगरेशन गाइड

SY89873LMI (16-vfqfn exposed pad, 16-mlf पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

SY89873LMI के लिए 16-vfqfn exposed pad, 16-mlf पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY89873LMI.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SY89873LMI के लिए उपयुक्त है 6 अनुप्रयोगs: Network Interface Clock Distribution, High-Speed Serial Link Clocking, Data Converter Clock Tree, Test and Measurement Instrumentation, Processor and FPGA Clock Distribution, Industrial Control and Automation.

🌐

Network Interface Clock Distribution

The SY89873LMI fits network-interface clock trees that require one differential source to feed three destination circuits at up to 2 GHz. Its 1:3 fanout reduces the need for multiple standalone buffer devices, while LVDS outputs support controlled-impedance PCB links and improved common-mode noise rejection. Place the device near the source or central clock junction, route all three output pairs over a continuous ground plane, and follow the manufacturer’s termination and decoupling circuit. The available CML, HSTL, LVDS, and LVPECL input support also helps the part accommodate several high-speed logic environments. Final jitter and skew margins should be verified with the actual source, receiver loads, and multilayer stackup because fanout itself does not guarantee system-level clock quality.

⚡

High-Speed Serial Link Clocking

The SY89873LMI is appropriate for local clock distribution in high-speed serial links operating to 2 GHz. Its three LVDS outputs can feed transmitter, transceiver, or recovery sections that need a common low-voltage differential reference. Differential signaling reduces signal-integrity risk compared with single-ended distribution, while the integrated fanout avoids presenting a full receiver load to the upstream clock generator. Engineers should match output and input trace lengths, avoid branch stubs, maintain continuous return paths, and verify the differential impedance of the actual PCB stackup. Because the package includes an exposed pad, its ground connection and thermal behavior must follow the manufacturer’s land pattern. Check cumulative jitter, deterministic skew, and rise/fall-time requirements at system level after accounting for PCB and receiver losses.

📡

Data Converter Clock Tree

The SY89873LMI can distribute a common clock to multiple data-converter or digital signal-processing sections when three LVDS-driven destinations are required. The 2 GHz maximum operating frequency provides margin for demanding conversion systems, and the 1:3 topology offers a compact alternative to several single-output buffers. Position the fanout IC to minimize trace length between the source and converters, and keep each differential output over a continuous reference plane to control impedance and common-mode behavior. Input termination must match the selected CML, HSTL, LVDS, or LVPECL interface. Validate converter setup-and-hold timing and allowable jitter at the receiver pins rather than relying only on nominal clock frequency. The exposed pad should be connected according to the manufacturer package drawing and tied into the system ground strategy.

🔧

Test and Measurement Instrumentation

The SY89873LMI is well suited to instrumentation clock trees that fan a differential reference into multiple acquisition, conversion, or trigger-processing channels. Its 1:3 ratio and LVDS outputs can preserve a common source across three destinations, while the 2 GHz capability addresses high-speed sampling systems. Use short, impedance-controlled LVDS routes and isolate sensitive analog sections from digital return currents to minimize coupling. Input and output terminations must follow the manufacturer reference circuit, while the exposed pad and supply planes require adequate thermal and electrical grounding. Instrumentation designers should measure output jitter, duty-cycle distortion, and inter-channel skew at the end of the assembled PCB rather than relying on nominal device frequency alone. Any cable, connector, or adapter in the clock path should be included in the end-to-end integrity analysis.

🖥️

Processor and FPGA Clock Distribution

The SY89873LMI can provide a local 1:3 fanout for processor, FPGA, or programmable-logic clock domains when the system uses compatible differential clocking. The three LVDS outputs reduce branch loading on an upstream oscillator or PLL and provide a controlled distribution point near the load circuits. Place the device between the clock source and destination devices, preserve matched differential geometry, and provide a continuous ground reference under every pair. Check each receiver’s input threshold and termination before assigning the outputs, since logic standards and termination arrangements can differ between domains. Validate setup-and-hold margin and clock uncertainty at the destination pins under maximum temperature and loading. The package’s exposed pad should be connected according to the manufacturer land pattern to maintain thermal performance and low-impedance return paths.

🏭

Industrial Control and Automation

The SY89873LMI can serve as a clock fanout stage in industrial control, automation, and communication equipment where one reference clock must reach three subsystems. Its LVDS outputs are suitable for electrically robust PCB interconnects when differential impedance and common-mode limits are respected. Keep the fanout device away from switching-node return currents, maintain a low-impedance ground connection to the exposed pad, and use the manufacturer-recommended input termination for the selected logic standard. Industrial systems should be evaluated for temperature range, supply tolerance, radiated emissions, and ESD requirements before release, because those qualifications are not established by the basic 2 GHz and 1:3 specifications. Measure clock jitter and edge quality under the longest expected trace and heaviest receiver loading, and preserve component placement flexibility for EMC corrections.

What is the SY89873LMI clock fanout buffer?
The SY89873LMI is a Microchip Technology 2 GHz clock fanout buffer and divider IC with a 1:3 fanout ratio and LVDS outputs. It accepts CML, HSTL, LVDS, and LVPECL inputs and is supplied in a 16-VFQFN exposed-pad, 16-MLF package. According to the Microchip Technology manufacturer datasheet, the device combines clock distribution with differential low-voltage output drive for high-speed PCB clock trees.
What are the key specifications of SY89873LMI that engineers should know?
The key SY89873LMI specifications are a 2 GHz maximum frequency, 1:3 fanout ratio, four supported input logic standards, and LVDS clock outputs. The device uses a 16-VFQFN exposed-pad package intended for surface-mount PCB assembly. According to the Microchip Technology manufacturer datasheet, its interface flexibility allows the part to operate with several common high-speed clocking ecosystems while providing three differential distribution outputs.
What input signal types does the SY89873LMI accept?
The SY89873LMI accepts CML, HSTL, LVDS, and LVPECL input signals. This range allows the buffer to be used with several high-speed clock sources rather than being restricted to one logic family. According to the Microchip Technology manufacturer datasheet, the input interface must be configured and terminated for the selected standard. Differential input routing, matched trace lengths, and suitable termination are essential for preserving clock quality.
Where can I download the SY89873LMI datasheet PDF?
The SY89873LMI datasheet should be obtained from the Microchip Technology product documentation for the exact ordering code. The manufacturer datasheet contains the authoritative pin assignments, recommended application circuit, electrical characteristics, and 16-VFQFN land pattern. Use the manufacturer’s PDF rather than a shortened distributor summary when assigning PCB pads, calculating terminations, or confirming operating limits for the selected device grade.
Where can I find the SY89873LMI pinout?
The SY89873LMI pinout is defined by the pin-description table and package drawing in the Microchip Technology manufacturer datasheet. The device is a 16-lead VFQFN exposed-pad package, also identified as 16-MLF, so the drawing must include the exposed thermal or ground pad separately from the numbered leads. Do not infer pin functions from another member of the family, because clock-enable, supply, and output assignments may vary.
Can SY89873LMI distribute a 2 GHz clock?
Yes, the SY89873LMI is specified for clock operation up to 2 GHz and provides a 1:3 fanout configuration with LVDS outputs. This makes it suitable for distributing a high-speed differential clock to three receiving circuits. According to the Microchip Technology manufacturer datasheet, useful system performance also depends on correct input termination, controlled-impedance routing, clean supply decoupling, and suitable output loads.
Where can I buy SY89873LMI online?
Use the Request a Quote form on this page to request the exact SY89873LMI ordering code, current commercial terms, and available delivery options. The MPN identifies the 16-VFQFN exposed-pad device, so the requested package and device grade should be confirmed during quotation. The form is the appropriate channel for current price, stock, minimum order quantity, lead time, and shipment requirements.
What is the price of the SY89873LMI?
The current commercial price for the SY89873LMI is provided through the Request a Quote form on this page. Because pricing and availability can vary with quantity, packaging, and market conditions, request a quotation using the exact MPN SY89873LMI. The form can also confirm stock status, minimum order quantity, and lead time for the 16-VFQFN exposed-pad configuration.
Is the SY89873LMI in stock and what is its lead time?
Current SY89873LMI stock status and lead time are best confirmed through the Request a Quote form on this page. The form supports an inquiry against the exact 16-VFQFN exposed-pad MPN and should return the latest available quantity, minimum order quantity, and production lead time. This avoids relying on a stale stock indication or confusing the standard MPN with its tape-and-reel ordering suffix.
What is the best drop-in replacement for the SY89873LMI?
No pin-compatible drop-in replacement for the SY89873LMI is established by the available manufacturer and cross-reference records. A valid replacement must match the 16-VFQFN exposed-pad land pattern, 1:3 fanout, 2 GHz operating limit, LVDS outputs, and supported input logic levels. Use the Microchip Technology cross-reference search with the complete requirements, then verify every pin and electrical limit before approving a substitute.
Can SY89873LMI-TR replace SY89873LMI on the same PCB?
The SY89873LMI-TR has the same stated 16-VFQFN exposed-pad clock-buffer identity as SY89873LMI, but the -TR suffix is an ordering or shipping-package designation rather than a distinct drop-in alternative. It may therefore be an ordering option for the same device family. Confirm the manufacturer ordering-information table for reel quantity, moisture level, and mark definition before treating the suffix as a separate engineering alternative.
When should I choose SY89873LMI for a clock tree?
Choose the SY89873LMI when a system needs one high-speed differential clock distributed to three destinations using LVDS outputs. Its documented input support for CML, HSTL, LVDS, and LVPECL provides flexibility, while the 2 GHz rating covers demanding serializer, network, conversion, and instrumentation clocking paths. Select it only when the complete pinout, power requirements, jitter expectations, and package layout match the manufacturer guidance.
Is SY89873LMI suitable for networking and communications equipment?
The SY89873LMI is suitable for many networking and communications clock trees because it distributes a differential clock at up to 2 GHz across three LVDS outputs. The low-voltage differential outputs suit controlled-impedance PCB links and help reduce susceptibility to common-mode interference. Actual deployment still requires differential-pair routing, correct termination, continuous reference planes, and confirmation that the device’s jitter and power specifications satisfy the system.
What can replace SY89873LMI?
A replacement for the SY89873LMI must preserve its 16-VFQFN exposed-pad footprint, 1:3 fanout ratio, 2 GHz maximum frequency, LVDS output type, and CML/HSTL/LVDS/LVPECL input support. No verified substitute meeting all of those conditions appears in the available cross-reference records. Engineers should use the Microchip Technology cross-reference search and compare the manufacturer datasheets rather than substituting a clock buffer merely because it uses a related package.
Is SY89873LMI the same as SY89873LMG?
The SY89873LMI and SY89873LMG are separate Microchip Technology ordering codes, and their suffix meanings must be confirmed in the manufacturer ordering table. The SY89873LMI is listed as a 16-VFQFN exposed-pad 2 GHz, 1:3 LVDS clock fanout buffer, while the SY89873LMG listing also describes a 3.3 V LVDS clock divider/fanout. They should not be treated as equivalent until package, temperature, and ordering details are checked.
How should the SY89873LMI be laid out on a PCB?
Place the SY89873LMI close to the clock source and receiving circuits, connect the exposed pad according to the manufacturer package drawing, and route each LVDS pair over a continuous reference plane. Keep the input and output differential pairs matched, avoid stubs and unnecessary vias, and terminate inputs and outputs exactly as shown in the application circuit. Proper supply decoupling and a low-impedance ground return are also necessary for stable clock operation.

के लिए इंजीनियरिंग संदर्भ डेटा SY89873LMI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SY89873LMI when the design requires a single differential clock source to drive three destinations through LVDS outputs, with operation up to 2 GHz. Its CML, HSTL, LVDS, and LVPECL input support is valuable in systems whose clock source changes or whose interfaces originate from different logic families. The 16-VFQFN exposed-pad package is appropriate for compact, multilayer PCB designs where controlled-impedance routing and a solid ground reference can be implemented. Do not approve a substitute solely from a distributor similarity list: a true drop-in candidate must match the land pattern, pin functions, input thresholds, LVDS output behavior, maximum frequency, power requirements, and environmental ratings. If the clock network needs a different fanout ratio, output standard, or divider function, use the Microchip Technology cross-reference search to identify a purpose-built family member and then verify its complete electrical and mechanical specification.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Device Type Clock fanout buffer and divider IC
Brand Microchip Technology
Package 16-VFQFN exposed pad, 16-MLF
Maximum Frequency 2 GHz
Fanout Ratio 1:3
Output Type LVDS
Supported Input Logic Levels CML, HSTL, LVDS, LVPECL
Mounting Type Surface mount
Exposed Pad Present

मुख्य विशेषताएँ

  • Integrated 1:3 LVDS clock distribution (बनामNo qualified drop-in alternative was established)
  • Broad high-speed input compatibility (बनामNo qualified drop-in alternative was established)
  • Compact high-speed fanout in a surface-mount package (बनामNo qualified drop-in alternative was established)

डिज़ाइन नोट्स

Route every LVDS output as a controlled-impedance differential pair over a continuous reference plane. Match intra-pair geometry and length according to the PCB stackup and interface specification, avoid stubs, and minimize layer changes and vias. Keep the clock source, fanout IC, and receivers physically close when timing margin is limited. Test the completed assembly for differential eye quality, duty-cycle distortion, and inter-channel skew because connector and receiver loading can materially alter results at the 2 GHz operating limit.

Connect the 16-VFQFN exposed pad exactly as directed by the manufacturer package drawing and land pattern. Provide uninterrupted ground-plane connection beneath the device and use the shortest practical return path for supply current. Place input and output decoupling close to their associated pins with low-ESR components, and keep the supply distribution network free of abrupt geometry changes. Confirm exposed-pad solderability and the assembly stencil pattern during PCB and process qualification.

Do not assume that any related SY89873 ordering code is a drop-in substitute without checking the ordering table, pin description, electrical ratings, and package drawing. The SY89873LMI-TR suffix denotes an ordering-package option rather than a separate engineering alternative. Likewise, verify that the input termination matches the selected CML, HSTL, LVDS, or LVPECL source. An incorrect termination can alter edge rate, duty cycle, common-mode voltage, and downstream clock margin even when the nominal frequency is correct.

Evaluate clock quality at the receiver pins, including jitter, deterministic skew, rise and fall time, and differential eye opening. The SY89873LMI’s 2 GHz rating describes its operating frequency capability, not guaranteed end-to-end signal integrity after PCB loss, connector reflections, or receiver loading. Keep sensitive analog and reference clocks away from switching power-node currents, and include realistic loads and termination in system simulations or bench measurements before production release.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations and the exact device-grade environmental qualifications require confirmation from the Microchip Technology product documentation for SY89873LMI.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SY89873LMI datasheet SY89873LMI datasheet pdf SY89873LMI pinout SY89873LMI specifications SY89873LMI equivalent SY89873LMI replacement SY89873LMI cross reference SY89873LMI footprint SY89873LMI price SY89873LMI stock Microchip SY89873LMI SY89873LMI 2GHz clock fanout SY89873LMI 1:3 LVDS SY89873LMI 16-VFQFN SY89873LMI vs SY89873LMG

संबंधित कंपोनेंट्स और शब्द

Microchip Technology SY89873LMI SY89873LMI-TR SY89873LMG clock fanout buffer clock divider clock buffer clock and timing IC clock distribution 1:3 fanout 2 GHz LVDS CML HSTL LVPECL differential clock 16-VFQFN 16-MLF QFN package family surface-mount semiconductor controlled-impedance routing clock jitter clock skew exposed pad semiconductor
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें