SY89873LMI - 2 GHz 1:3 LVDS Clock Fanout | Microchip
Teilenummer: SY89873LMI ✓ AktivSY89873LMI Übersicht
A clock fanout buffer is a clock-timing semiconductor that receives one differential clock and reproduces it across multiple outputs. Clock and timing ICs form part of the broader digital semiconductor hierarchy, supporting processors, network interfaces, serializers, test equipment, and communication systems. The SY89873LMI’s divider and fanout functions can distribute a common reference signal while limiting loading and maintaining signal integrity.
Key features include a maximum operating frequency of 2 GHz, a 1:3 output configuration, and LVDS clock outputs. The input stage accepts CML, HSTL, LVDS, and LVPECL logic levels, allowing interoperability with common high-speed clock sources. Its 16-VFQFN exposed-pad package supports compact placement while providing a thermal pad for heat dissipation. These characteristics suit systems requiring multiple low-voltage differential clock outputs.
The device combines a clock input stage, fanout and divider circuitry, and three differential output drivers in one integrated package. Differential LVDS output signaling reduces common-mode noise sensitivity and supports reliable propagation across controlled PCB traces. The exposed pad must be connected to the appropriate ground plane according to the manufacturer’s land-pattern and layout instructions, while input and output return paths require short, controlled-impedance routing.
Typical uses include networking and communications equipment, high-speed serial links, clock-tree distribution, data-converter systems, and instrument clocks. It can also serve as a local fanout stage where a system clock must reach several subsystems without loading the oscillator or upstream PLL directly. Configuration, termination, and decoupling details should be selected for the actual clock standard and trace environment.
For reliable deployment, use the manufacturer’s reference layout and pin-description table, provide the input interface with the required termination, and route LVDS pairs as controlled-impedance differential pairs. The exposed ground pad and supply connections should be connected according to the package drawing, with high-frequency return paths kept continuous.
This page consolidates device specifications, sourcing guidance, engineering design notes, application analysis, and a transparent assessment of drop-in alternatives. It helps engineers identify whether the SY89873LMI matches the required clock topology, package, interface standard, and board-level integration constraints.
Drop-in-Alternativen für SY89873LMI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernSY89873LMI Technische Daten
| Device Type | Clock fanout buffer and divider IC |
| Maximum Frequency | 2 GHz |
| Fanout Ratio | 1:3 |
| Ausgangstyp | LVDS |
| Supported Input Logic Levels | CML, HSTL, LVDS, LVPECL |
| Ausgangskonfiguration | 1:3 clock fanout |
| Gehäuse | 16-VFQFN exposed pad, 16-MLF |
| Montageart | Surface mount |
| Lead Count | 16 leads |
| Exposed Pad | Present |
SY89873LMI 16-vfqfn exposed pad, 16-mlf Pinbelegungsleitfaden
Pinbelegung für SY89873LMI (16-vfqfn exposed pad, 16-mlf-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für SY89873LMI.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
SY89873LMI ist geeignet für 6 Anwendungs: Network Interface Clock Distribution, High-Speed Serial Link Clocking, Data Converter Clock Tree, Test and Measurement Instrumentation, Processor and FPGA Clock Distribution, Industrial Control and Automation.
Network Interface Clock Distribution
The SY89873LMI fits network-interface clock trees that require one differential source to feed three destination circuits at up to 2 GHz. Its 1:3 fanout reduces the need for multiple standalone buffer devices, while LVDS outputs support controlled-impedance PCB links and improved common-mode noise rejection. Place the device near the source or central clock junction, route all three output pairs over a continuous ground plane, and follow the manufacturer’s termination and decoupling circuit. The available CML, HSTL, LVDS, and LVPECL input support also helps the part accommodate several high-speed logic environments. Final jitter and skew margins should be verified with the actual source, receiver loads, and multilayer stackup because fanout itself does not guarantee system-level clock quality.
Empfohlen
High-Speed Serial Link Clocking
The SY89873LMI is appropriate for local clock distribution in high-speed serial links operating to 2 GHz. Its three LVDS outputs can feed transmitter, transceiver, or recovery sections that need a common low-voltage differential reference. Differential signaling reduces signal-integrity risk compared with single-ended distribution, while the integrated fanout avoids presenting a full receiver load to the upstream clock generator. Engineers should match output and input trace lengths, avoid branch stubs, maintain continuous return paths, and verify the differential impedance of the actual PCB stackup. Because the package includes an exposed pad, its ground connection and thermal behavior must follow the manufacturer’s land pattern. Check cumulative jitter, deterministic skew, and rise/fall-time requirements at system level after accounting for PCB and receiver losses.
Empfohlen
Data Converter Clock Tree
The SY89873LMI can distribute a common clock to multiple data-converter or digital signal-processing sections when three LVDS-driven destinations are required. The 2 GHz maximum operating frequency provides margin for demanding conversion systems, and the 1:3 topology offers a compact alternative to several single-output buffers. Position the fanout IC to minimize trace length between the source and converters, and keep each differential output over a continuous reference plane to control impedance and common-mode behavior. Input termination must match the selected CML, HSTL, LVDS, or LVPECL interface. Validate converter setup-and-hold timing and allowable jitter at the receiver pins rather than relying only on nominal clock frequency. The exposed pad should be connected according to the manufacturer package drawing and tied into the system ground strategy.
Empfohlen
Test and Measurement Instrumentation
The SY89873LMI is well suited to instrumentation clock trees that fan a differential reference into multiple acquisition, conversion, or trigger-processing channels. Its 1:3 ratio and LVDS outputs can preserve a common source across three destinations, while the 2 GHz capability addresses high-speed sampling systems. Use short, impedance-controlled LVDS routes and isolate sensitive analog sections from digital return currents to minimize coupling. Input and output terminations must follow the manufacturer reference circuit, while the exposed pad and supply planes require adequate thermal and electrical grounding. Instrumentation designers should measure output jitter, duty-cycle distortion, and inter-channel skew at the end of the assembled PCB rather than relying on nominal device frequency alone. Any cable, connector, or adapter in the clock path should be included in the end-to-end integrity analysis.
Empfohlen
Processor and FPGA Clock Distribution
The SY89873LMI can provide a local 1:3 fanout for processor, FPGA, or programmable-logic clock domains when the system uses compatible differential clocking. The three LVDS outputs reduce branch loading on an upstream oscillator or PLL and provide a controlled distribution point near the load circuits. Place the device between the clock source and destination devices, preserve matched differential geometry, and provide a continuous ground reference under every pair. Check each receiver’s input threshold and termination before assigning the outputs, since logic standards and termination arrangements can differ between domains. Validate setup-and-hold margin and clock uncertainty at the destination pins under maximum temperature and loading. The package’s exposed pad should be connected according to the manufacturer land pattern to maintain thermal performance and low-impedance return paths.
Empfohlen
Industrial Control and Automation
The SY89873LMI can serve as a clock fanout stage in industrial control, automation, and communication equipment where one reference clock must reach three subsystems. Its LVDS outputs are suitable for electrically robust PCB interconnects when differential impedance and common-mode limits are respected. Keep the fanout device away from switching-node return currents, maintain a low-impedance ground connection to the exposed pad, and use the manufacturer-recommended input termination for the selected logic standard. Industrial systems should be evaluated for temperature range, supply tolerance, radiated emissions, and ESD requirements before release, because those qualifications are not established by the basic 2 GHz and 1:3 specifications. Measure clock jitter and edge quality under the longest expected trace and heaviest receiver loading, and preserve component placement flexibility for EMC corrections.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für SY89873LMI – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Device Type | Clock fanout buffer and divider IC |
| Brand | Microchip Technology |
| Package | 16-VFQFN exposed pad, 16-MLF |
| Maximum Frequency | 2 GHz |
| Fanout Ratio | 1:3 |
| Output Type | LVDS |
| Supported Input Logic Levels | CML, HSTL, LVDS, LVPECL |
| Mounting Type | Surface mount |
| Exposed Pad | Present |
Wichtigste Unterscheidungsmerkmale
- Integrated 1:3 LVDS clock distribution (vs. No qualified drop-in alternative was established)
- Broad high-speed input compatibility (vs. No qualified drop-in alternative was established)
- Compact high-speed fanout in a surface-mount package (vs. No qualified drop-in alternative was established)
Designhinweise
Route every LVDS output as a controlled-impedance differential pair over a continuous reference plane. Match intra-pair geometry and length according to the PCB stackup and interface specification, avoid stubs, and minimize layer changes and vias. Keep the clock source, fanout IC, and receivers physically close when timing margin is limited. Test the completed assembly for differential eye quality, duty-cycle distortion, and inter-channel skew because connector and receiver loading can materially alter results at the 2 GHz operating limit.
Connect the 16-VFQFN exposed pad exactly as directed by the manufacturer package drawing and land pattern. Provide uninterrupted ground-plane connection beneath the device and use the shortest practical return path for supply current. Place input and output decoupling close to their associated pins with low-ESR components, and keep the supply distribution network free of abrupt geometry changes. Confirm exposed-pad solderability and the assembly stencil pattern during PCB and process qualification.
Do not assume that any related SY89873 ordering code is a drop-in substitute without checking the ordering table, pin description, electrical ratings, and package drawing. The SY89873LMI-TR suffix denotes an ordering-package option rather than a separate engineering alternative. Likewise, verify that the input termination matches the selected CML, HSTL, LVDS, or LVPECL source. An incorrect termination can alter edge rate, duty cycle, common-mode voltage, and downstream clock margin even when the nominal frequency is correct.
Evaluate clock quality at the receiver pins, including jitter, deterministic skew, rise and fall time, and differential eye opening. The SY89873LMI’s 2 GHz rating describes its operating frequency capability, not guaranteed end-to-end signal integrity after PCB loss, connector reflections, or receiver loading. Keep sensitive analog and reference clocks away from switching power-node currents, and include realistic loads and termination in system simulations or bench measurements before production release.
Compliance-Informationen
Compliance declarations and the exact device-grade environmental qualifications require confirmation from the Microchip Technology product documentation for SY89873LMI.