Microchip Technology

SY89875UMI - 2GHz 1:2 LVDS Clock Buffer | Microchip

MPN: SY89875UMI ✓ सक्रिय
2.5 V Vdss CML, HSTL, LVDS, and LVPECL Rds(on) 16-VFQFN exposed pad (16-MLF) Package 2 GHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

SY89875UMI अवलोकन

The Microchip Technology SY89875UMI is a 2.5 V precision-edge programmable clock divider and 1:2 fanout buffer with a maximum operating frequency of 2 GHz, differential inputs, LVDS outputs, and internal input termination. The device is offered in a 16-VFQFN exposed-pad package identified as 16-MLF.

A clock buffer is a digital timing IC that receives a reference clock and reproduces or distributes that signal with low timing degradation. Clock dividers reduce a clock to a lower frequency, fanout buffers create multiple outputs, and differential signaling carries timing information across a PCB using complementary data pairs. These functions place the SY89875UMI within the clock and timing IC hierarchy of digital logic and semiconductor-based system timing.

The principal features of the SY89875UMI include a 1:2 fanout ratio, programmable clock division, differential input support, LVDS output support, and internal termination. The manufacturer identifies the device as accepting any differential input type while supporting CML, HSTL, LVDS, and LVPECL input signaling. This versatility allows the buffer to operate near several common high-speed clocking environments without requiring a separate input-conversion stage.

At the circuit level, the SY89875UMI combines a programmable divider with two complementary clock outputs. Differential clock distribution reduces sensitivity to common-mode noise when the output is routed through controlled-impedance PCB traces. Internal input termination helps control the impedance presented by the differential input network, although the exact termination value and implementation details should be confirmed in the manufacturer datasheet and reference design before final signal-integrity calculations.

Typical uses include LVDS clock distribution for communications equipment, programmable clock generation in server and networking systems, fanout to multiple downstream logic devices, and timing support in industrial or test systems. The 2 GHz operating limit suits high-speed digital backplanes and interfaces, while the 1:2 fanout allows one source clock to feed two destinations.

PCB implementation requires careful attention to differential pair geometry, return-path continuity, and the exposed thermal pad. The 16-VFQFN footprint also demands an unobstructed ground and thermal-via arrangement beneath the device. Verify the complete pin assignment, input logic levels, divider configuration method, and output termination requirements against the manufacturer datasheet before releasing the layout.

This page organizes the SY89875UMI specifications, sourcing questions, functional use cases, package information, and confirmed same-brand replacement information into an engineering-focused guide. The design notes and comparison tables also identify which parameters require confirmation before PCB or system-level qualification.

के लिए ड्रॉप-इन विकल्प SY89875UMI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं SY89875UMI (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Fanout Ratio.

SY89875UMG

✅ ड्रॉप-इन
Microchip Technology
📦 16-VFQFN exposed pad (16-MLF)
Programmable clock divider and 1:2 fanout buffer · 2 GHz · 1:2 · Any differential input · CML, HSTL, LVDS, and LVPECL · LVDS · 2.5 V nominal · 2.375 V to 2.625 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

SY89875UMI विशेषताएं

सप्लाई वोल्टेज 2.5 V
Maximum Operating Frequency 2 GHz
Fanout Ratio 1:2 (unitless)
आउटपुट कॉन्फ़िगरेशन 2 differential LVDS outputs
Input Configuration Any differential input type
Supported Input Standards CML, HSTL, LVDS, and LVPECL
Internal Termination Yes
Clock Division Programmable
Product Series Precision Edge
पैकेज 16-VFQFN exposed pad (16-MLF)
पिन काउंट 16 pins
माउंटिंग प्रकार Surface mount

SY89875UMI 16-vfqfn exposed pad (16-mlf) पिन कॉन्फ़िगरेशन गाइड

SY89875UMI (16-vfqfn exposed pad (16-mlf) पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

SY89875UMI के लिए 16-vfqfn exposed pad (16-mlf) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY89875UMI.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SY89875UMI के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed LVDS Clock Distribution, Networking and Communications Equipment, Server and Storage Backplanes, Programmable Clock Generation, Industrial Control and Instrumentation, Test and Measurement Systems.

🌐

High-Speed LVDS Clock Distribution

The SY89875UMI fits high-speed LVDS clock distribution because it combines a 1:2 fanout ratio with operation up to 2 GHz and differential LVDS outputs. It can divide the incoming clock under software- or control-based configuration and then distribute the result to two destinations. Differential routing reduces susceptibility to common-mode disturbance compared with a single-ended implementation. Internal input termination helps control the source impedance, while controlled-impedance PCB routing and a continuous return path remain essential for reliable 2 GHz operation.

🌐

Networking and Communications Equipment

The SY89875UMI is suitable for networking and communications equipment requiring a local 2 GHz differential clock with two outputs. Its input stage accepts any differential type and is listed for CML, HSTL, LVDS, and LVPECL sources, allowing it to work with multiple high-speed clock ecosystems. The 2.5 V supply and programmable divider provide flexibility when downstream interfaces require a divided clock. Use short, matched differential traces and confirm converter jitter and fanout-device contribution during signal-integrity analysis.

🖥️

Server and Storage Backplanes

The SY89875UMI can distribute a 2 GHz differential clock to two sections of a server, storage, or backplane subsystem. Its 1:2 architecture reduces the number of separate clock-output stages needed when two closely related loads require the same timing reference. Differential LVDS outputs are useful across circuit-board distances when trace geometry and reference planes are controlled. Before deployment, evaluate total clock jitter, power-supply noise, channel loss, return-path discontinuities, and the divider setting used for each downstream interface.

🔧

Programmable Clock Generation

The programmable divider integrated into the SY89875UMI makes it useful when a system must derive one or more lower-rate clocks from a common differential reference. At the same time, its 1:2 fanout supplies two outputs for distribution to separate logic groups. The device operates from 2.5 V and supports input signaling from CML, HSTL, LVDS, and LVPECL sources. Designers should consult the manufacturer configuration table to determine the supported divider ratios and the permissible input frequency for each programmed mode.

🏭

Industrial Control and Instrumentation

The SY89875UMI can provide synchronized timing to two processing sections in industrial control, instrumentation, and automated test systems. A differential input can reduce coupling from nearby power converters and motors, while the two fanout outputs support parallel clocking of measurement or control logic. The 2 GHz capability provides headroom for high-speed sampling and communication blocks, although the selected divider mode must maintain the required frequency and timing margin. Thermal management and power-quality checks are also necessary around the 2.5 V regulator.

⚡

Test and Measurement Systems

The SY89875UMI is appropriate for test and measurement systems that need to distribute a precise differential reference clock to two acquisition or synthesis channels. Programmable division allows a common source to support different operating modes, while the 2 GHz maximum frequency accommodates high-speed test paths. Differential LVDS outputs can reduce sensitivity to crosstalk when routed through a densely populated instrument chassis. Verify output amplitude, additive jitter, duty-cycle distortion, channel skew, and termination arrangement with the manufacturer's characterization data before calibration.

What is the SY89875UMI clock buffer used for?
The SY89875UMI is a 2.5 V programmable clock divider and 1:2 fanout buffer designed for clock signals up to 2 GHz. It accepts any differential input type and supports CML, HSTL, LVDS, and LVPECL inputs before delivering LVDS clock outputs. According to the Microchip Technology manufacturer datasheet, it also includes internal input termination, making it suitable for high-speed clock distribution and programmable timing systems.
What is the operating frequency of the SY89875UMI?
The SY89875UMI supports a maximum operating frequency of 2 GHz. This frequency rating applies to the high-speed differential clocking function described in the Microchip Technology manufacturer datasheet. The device combines that capability with a 1:2 fanout ratio, so one differential input can drive two LVDS outputs. Confirm the divider-specific frequency limits and timing margin against the required system clock before final sign-off.
What input standards does the SY89875UMI support?
The SY89875UMI supports differential CML, HSTL, LVDS, and LVPECL input signaling and produces LVDS outputs. The Microchip Technology product description characterizes the input as supporting any differential type within the device's specified operating conditions. Its internal termination helps establish a controlled input network, but signal amplitude, common-mode range, divider mode, and termination details should be verified in the manufacturer datasheet.
What is the SY89875UMI package?
The SY89875UMI is offered in a 16-VFQFN exposed-pad package, also identified in distributor records as 16-MLF. The exposed pad requires a low-impedance thermal and ground connection on the PCB. Because the complete numbered pin map is not published in the accessible product summary, use the manufacturer datasheet pin-description table when assigning tracks and vias around the package.
Where can I download the SY89875UMI datasheet PDF?
The official SY89875UMI datasheet should be obtained from the Microchip Technology product page linked in the datasheet field on this page. The document defines the 2.5 V supply, programmable divider, differential input behavior, 1:2 LVDS fanout, internal termination, pinout, and timing specifications. Use the manufacturer PDF for the authoritative pin numbers and application information rather than relying on a third-party mirror.
Where can I find the SY89875UMI pinout?
The SY89875UMI pinout is found in the pin-description table of the Microchip Technology manufacturer datasheet. The part uses a 16-VFQFN exposed-pad footprint, but signal names, control functions, divider configuration, and exposed-pad connectivity must be taken directly from that table. This is especially important before assigning the 16 peripheral connections or designing the exposed-pad via array.
Where to buy SY89875UMI online?
Use the Request a Quote form on this page to request SY89875UMI pricing, availability, and lead time. The requested part is the Microchip Technology SY89875UMI in its specified 16-VFQFN exposed-pad package. The form is the appropriate channel for current commercial terms and avoids presenting a potentially stale inventory or quantity-break figure as a guaranteed commitment.
What is the price of SY89875UMI?
Current SY89875UMI pricing is provided through the Request a Quote form on this page. The commercial response should identify the quantity, package suffix, delivery location, and target date associated with your order. Because pricing and inventory can change independently of technical documentation, obtain a written quotation for the exact MPN instead of relying on a cached marketplace value.
What is the lead time for SY89875UMI?
The current lead time for SY89875UMI should be confirmed through the Request a Quote form on this page. Include the required order quantity, shipment destination, production schedule, and whether unopened factory packing is acceptable. Microchip's product and distribution records support current sourcing activity, but an order-specific lead-time commitment requires a current supply confirmation.
Is SY89875UMI in stock?
SY89875UMI stock status should be requested through the Request a Quote form on this page so the response reflects current inventory rather than a historical listing. When requesting a quotation, specify the quantity and whether the 16-MLF package is required for the production assembly. Factory availability, allocation, and delivery timing should be confirmed together before committing the device to a build schedule.
What is the best drop-in replacement for SY89875UMI?
The SY89875UMG is the confirmed same-brand replacement candidate for the SY89875UMI because it shares the same base design and has been identified as a substitute for this device. The SY89875UMI is specified as a 2 GHz, 1:2, 2.5 V programmable differential-input-to-LVDS clock device. Review the manufacturer datasheets for pin, divider, ESD, and marking differences before approving a production substitution.
Can SY89875UMG replace SY89875UMI?
SY89875UMG can be considered as a drop-in replacement candidate for the SY89875UMI because both belong to the same base design and the replacement relationship has been identified in cross-reference information. Both target the 2.5 V, 2 GHz, 1:2 differential-clock-to-LVDS application. Confirm pin assignments, divider settings, propagation delay, output levels, and package markings against the manufacturer documentation before substitution.
What can replace the SY89875UMI in a 2 GHz clock system?
The SY89875UMG is the leading replacement candidate for the SY89875UMI in a 2 GHz differential clock-distribution design. It shares the same base design and is associated with the discontinued-device substitution path. A true drop-in decision still requires checking the 16-VFQFN footprint, exposed-pad connection, input termination, programmable divider behavior, and timing specifications. No cross-brand drop-in replacement has been confirmed for publication.
Is SY89875UMI the same as SY89875UMG?
The SY89875UMI and SY89875UMG are closely related versions of the same clock-buffer design, and the SY89875UMG has been identified as a substitute for the SY89875UMI. They target the same fundamental 2.5 V, 2 GHz, 1:2 differential-input-to-LVDS clock function. Treat them as equivalent only after comparing the manufacturer pin table, divider configuration, timing, termination, ESD behavior, and ordering information.
When should I choose SY89875UMI over SY89875UMG?
Choose the SY89875UMI when its exact ordering configuration, qualification status, or device marking is required by the assembled product or when the SY89875UMG has not passed the same internal approval. The SY89875UMG is the documented substitute candidate, so either can serve the same 2 GHz clock role when its specific manufacturer documentation matches the system requirements. Existing qualified BOM entries should not be changed without a documented engineering review.
What are the key specifications of SY89875UMI that engineers should know?
The key SY89875UMI specifications are a 2.5 V supply, operation up to 2 GHz, a programmable divider, and a 1:2 fanout arrangement with differential LVDS outputs. The device accepts CML, HSTL, LVDS, and LVPECL differential inputs and includes internal termination. It is packaged as a 16-VFQFN exposed-pad device, identified as 16-MLF, with input standards and timing requirements defined by the Microchip Technology manufacturer datasheet.
Is there a cross-brand equivalent for SY89875UMI?
No cross-brand drop-in equivalent for the SY89875UMI has been confirmed with enough pin-level and parameter-level evidence for publication. The confirmed substitute path is the same-brand SY89875UMG, which shares the base design. Because clock-buffer compatibility depends on divider behavior, input thresholds, output timing, termination, and package layout, use the Request a Quote form to discuss an engineering-approved sourcing path for the exact 16-MLF device.

के लिए इंजीनियरिंग संदर्भ डेटा SY89875UMI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SY89875UMI for a 2.5 V, 2 GHz clock-distribution design requiring programmable division, differential input, and a 1:2 LVDS fanout. It is particularly useful when the source may use CML, HSTL, LVDS, or LVPECL signaling and when internal input termination simplifies the differential network. The SY89875UMG is the preferred documented substitute when the exact ordering configuration of the SY89875UMI is unavailable, but the change should receive normal engineering approval. Verify package pins, divider behavior, propagation delay, input thresholds, output levels, and qualification details for the specific ordering code. No cross-brand drop-in option should be selected without an independent pin-level and timing-level review, because clock devices with similar headline frequency specifications can differ materially in jitter, divider control, termination, and output skew.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SY89875UMG
Package 16-VFQFN exposed pad (16-MLF) 16-VFQFN exposed pad (16-MLF)
Brand Microchip Technology Microchip Technology
Product Type Programmable clock divider and 1:2 fanout buffer Same-base-design clock divider and fanout substitute
Supply Voltage 2.5 V 2.5 V
Maximum Frequency 2 GHz 2 GHz
Fanout Ratio 1:2 1:2
Input Signaling Any differential input; CML, HSTL, LVDS, and LVPECL supported Differential clock input
Output Signaling LVDS LVDS
Internal Termination Yes Yes
Divider Control Programmable Programmable

मुख्य विशेषताएँ

  • Combines programmable division with two-output fanout (बनामSY89875UMG)
  • Supports several differential input standards (बनामSY89875UMG)
  • Uses a compact exposed-pad clock-buffer package (बनामSY89875UMG)

डिज़ाइन नोट्स

Route each differential clock pair as a continuous, impedance-controlled pair with symmetric geometry and a continuous reference plane beneath it. Avoid vias where practical because each transition can create impedance discontinuities and degrade 2 GHz edge quality. If vias are unavoidable, use matched via structures on both conductors, provide nearby ground stitching, and verify the complete channel with an oscilloscope or channel-simulation tool. Use the manufacturer pin table when identifying differential input and LVDS output pairs.

The 16-VFQFN exposed pad must be connected to the appropriate ground reference and thermal plane with a dense via array. Maintain solder-mask and paste patterns compatible with the manufacturer's 16-MLF footprint and avoid placing high-current or noisy traces beneath the exposed pad. Review the pad-to-via geometry in the manufacturer land-pattern drawing, because an incorrect thermal-via arrangement can affect solderability, heat transfer, and return-path continuity during switching transitions.

Confirm the source impedance, internal input termination, LVDS output loading, trace length, and downstream termination before finalizing the topology. The internal termination simplifies differential input implementation, but it must be coordinated with the driver impedance and cable or PCB load. Use the manufacturer's timing and output specifications to assess duty-cycle distortion, skew, and jitter at the selected divider mode. Differential probing with matched cables is recommended to avoid introducing measurement artifacts.

Place the 2.5 V supply decoupling network close to the device and keep return-current paths short. The clock buffer's exact supply-current limit, operating range, and dissipation depend on configuration and frequency, so consult the manufacturer datasheet for the applicable values. If the 2.5 V rail is generated by a switching converter, place the regulator away from sensitive clock pairs and monitor supply ripple at the device pins with a low-inductance probe.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance attributes require confirmation from the manufacturer declaration, product page, or ordering documentation for the exact SY89875UMI configuration.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SY89875UMI datasheet SY89875UMI pinout SY89875UMI datasheet pdf SY89875UMI equivalent SY89875UMI replacement SY89875UMI cross reference SY89875UMI vs SY89875UMG SY89875UMI 2GHz clock buffer SY89875UMI 16-VFQFN footprint SY89875UMI LVDS application SY89875UMI price Microchip Technology SY89875UMI

संबंधित कंपोनेंट्स और शब्द

Microchip Technology SY89875UMI SY89875UMG clock buffer clock fanout buffer programmable clock divider clock and timing IC differential clock LVDS CML HSTL LVPECL Precision Edge 16-VFQFN exposed pad 16-MLF surface-mount package internal termination 2 GHz 1:2 fanout 2.5 V supply differential signaling signal integrity semiconductor clock distribution
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें