TAS5622ADDV - 125W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5622ADDV ✓ सक्रियTAS5622ADDV अवलोकन
A Class-D audio amplifier is a switching power amplifier that uses pulse-width-modulated drive signals to transfer energy to a loudspeaker load. It belongs to the audio amplifier hierarchy, which includes linear and nonlinear amplifier implementations. Compared with a conventional linear output stage, an efficient Class-D architecture can reduce heat in the output path while supporting high output power in a compact package.
The TAS5622A family provides 125 W stereo output and 250 W mono operation from a 12 V to 34 V supply. Its PWM input supports digital audio signal chains, while the integrated thermal enhancement and large MOSFET output devices are intended to improve efficiency and reduce losses. The 44-pin HTSSOP package also provides a low-inductance power stage with an exposed thermal pad for board-level heat removal.
Key operating features include automatic mute and a no-noise switch, differential input support, and integrated switching outputs. The device can operate as either a stereo amplifier or a mono bridge-tied amplifier. Its operating-temperature range is -40 °C to 125 °C, making it suitable for industrial, consumer, and automotive-adjacent audio equipment when the complete system meets its applicable qualification requirements.
Typical uses include powered speakers, soundbars, active subwoofers, compact home-theater systems, professional audio equipment, and industrial audio announcement products. A digital-audio processor can feed the PWM input directly, simplifying the signal path in designs that use the PurePath HD architecture.
Thermal management and power-supply layout are the main implementation constraints. Follow the manufacturer reference schematic and PCB layout, place output-filter and supply capacitors according to the datasheet, and provide copper area and thermal vias beneath the exposed pad. The package design does not eliminate the need to verify enclosure temperature, loudspeaker load behavior, and supply ripple under sustained full-power operation.
This product record combines the exact ordering information, package designation, power ratings, voltage range, and product-family description with practical guidance for thermal design, signal integration, sourcing, and drop-in replacement evaluation.
के लिए ड्रॉप-इन विकल्प TAS5622ADDV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TAS5622ADDV (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Mono Output Power, Output Topology, Stereo Output Power, Supply Voltage Range, Thermal Enhancement.
TAS5624ADDV
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →TAS5622ADDV Maximum Ratings और Electrical Characteristics
| Product Type | Class-D audio power amplifier |
| Stereo Output Power | 125 W |
| Mono Output Power | 250 W |
| Supply Voltage Range | 12 V to 34 V |
| Input Signal Type | PWM input |
| Amplifier Configuration | 1-channel mono or 2-channel stereo |
| Output Topology | Class-D |
| Audio Technology | PurePath HD |
| पैकेज | 44-pin HTSSOP (DDV) |
| पिन काउंट | 44 pins |
| माउंटिंग प्रकार | Surface mount |
| ऑपरेटिंग तापमान रेंज | -40 °C to 125 °C |
| Thermal Enhancement | Thermally enhanced package |
| Automatic Mute | Supported |
| No-Noise Switch | Supported |
| Output Device Technology | Large MOSFET switching output stage |
TAS5622ADDV 44-pin htssop (ddv) पिन कॉन्फ़िगरेशन गाइड
TAS5622ADDV (44-pin htssop (ddv) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TAS5622ADDV.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TAS5622ADDV के लिए उपयुक्त है 6 अनुप्रयोगs: Powered Stereo Speaker, Active Subwoofer, Soundbar Audio Output, Home Theater Power Amplifier, Professional Audio Monitor, Industrial Audio Announcer.
Powered Stereo Speaker
The TAS5622ADDV suits powered stereo speakers requiring up to 125 W per channel from a 12 V to 34 V supply. Its PWM input can receive a compatible digital audio signal directly, while the integrated Class-D output stage drives the loudspeaker outputs efficiently. The 44-pin HTSSOP package integrates the switching devices, but the design still requires the manufacturer reference layout, output filters, and substantial copper around the exposed thermal pad. Sustained high-power operation should be evaluated at the actual enclosure temperature and speaker impedance.
अनुशंसित
Active Subwoofer
The TAS5622ADDV can be configured for mono operation at up to 250 W, making it appropriate for an active subwoofer that requires substantial low-frequency power from a single amplifier channel. Its differential PWM architecture supports efficient Class-D conversion and reduces the need for a large linear output stage. In a subwoofer enclosure, thermal design remains critical because low bass content can demand sustained output. Use the Texas Instruments reference schematic and PCB layout, verify the inductor and filter values, and validate peak current and thermal rise with the selected speaker impedance.
अनुशंसित
Soundbar Audio Output
A soundbar can use the TAS5622ADDV for high-power left and right channels when its 125 W stereo capability matches the speaker design. The PWM input allows a digital audio processor to drive the power stage without an additional analog input path, helping control channel routing and volume in a multi-zone system. The 12 V to 34 V operating range suits higher-power consumer audio rails, while the exposed-pad HTSSOP package requires careful layout to prevent thermal throttling. Peak-power, idle-pop, mute behavior, and output-filter sound quality should be verified during system integration.
अनुशंसित
Home Theater Power Amplifier
The TAS5622ADDV is suitable for a compact home-theater power amplifier requiring substantial stereo output and efficient amplification. A digital source or surround processor can provide the compatible PWM audio stream, while the Class-D power stage delivers up to 125 W per channel according to its specified operating conditions. Because the device is a high-current switching stage, the power supply, decoupling network, output filters, and ground return must be designed together. Confirm channel synchronization, amplifier mute sequencing, and thermal margins in the finished enclosure.
अनुशंसित
Professional Audio Monitor
The TAS5622ADDV can serve as the power stage in a professional near-field monitor when its power rating exceeds the continuous speaker demand and the system uses a compatible digital signal path. The 125 W stereo configuration provides useful headroom for music transients, while the 250 W mono rating supports bridge-tied configurations. Low-frequency behavior depends on the external LC output filter and speaker load, so use the manufacturer reference values rather than treating the power stage as a self-contained loudspeaker driver. Thermal rise and audible distortion should be measured in the final enclosure.
अनुशंसित
Industrial Audio Announcer
The TAS5622ADDV can drive high-output industrial audio announcement speakers where high efficiency and a compact surface-mount power stage are valuable. The 12 V to 34 V supply range supports industrial power architectures, and the -40 °C to 125 °C device rating supports a broad environmental range when the assembled product satisfies its own qualification requirements. Industrial installations may introduce long cable runs and highly inductive speaker loads, making output-filter and protection design critical. Validate EMI, ground-fault behavior, thermal performance, and audible artifacts during worst-case announcement conditions.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TAS5622ADDV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TAS5624ADDV |
|---|---|---|
| Package | 44-pin HTSSOP (DDV) | 44-pin HTSSOP (DDV) |
| Brand | Texas Instruments | Texas Instruments |
मुख्य विशेषताएँ
- High-power stereo operation in a single integrated power-stage package (बनामTAS5624ADDV)
- Wide high-voltage operating range for high-power audio rails (बनामTAS5624ADDV)
- Digital-input integration simplifies the PurePath HD signal chain (बनामTAS5624ADDV)
डिज़ाइन नोट्स
Use the Texas Instruments reference PCB and keep the exposed thermal pad directly coupled to a continuous copper area with multiple thermal vias. The 125 W stereo and 250 W mono ratings are operating limits rather than guarantees for every enclosure. Validate junction and case temperature at the highest expected channel load, including sustained bass content, because heat accumulation in a compact enclosure can reduce available output even when the board layout is electrically correct.
Follow the manufacturer power-stage layout for the high-current supply and output paths. Keep input, PWM-control, ground, and power connections separated to reduce switching-node coupling into the audio signal. Place input filtering, local supply decoupling, and output-filter components at the locations shown in the Texas Instruments reference schematic and PCB layout. Deviations should be tested for audible artifacts, unstable switching, and excessive output ripple.
Estimated: power-conversion loss equals output power divided by efficiency minus output power. At 125 W output and an assumed 90% efficiency, the estimated switching-stage input power is 138.9 W and the estimated loss is 13.9 W; at 250 W output with the same assumption, input power is 277.8 W and estimated loss is 27.8 W. These estimates show why supply capacity, copper loss, and enclosure cooling must be reviewed for the actual amplifier operating mode.
Do not confuse the ADDV orderable format with related TAS5622A order codes without checking the manufacturer ordering table. Also do not assume that a device with the same 44-pin DDV outline is automatically compatible: PWM logic levels, exposed-pad connections, control pins, output topology, and protection thresholds must match. Before replacing a fitted TAS5622ADDV, compare every pin and review the output-filter values, supply requirements, and reference layout.
अनुपालन जानकारी
Compliance status is not stated in the available product-page and distributor information. The -40 °C to 125 °C operating-temperature rating does not itself establish AEC-Q100 qualification.