Texas Instruments

TAS5622ADDV - 125W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5622ADDV ✓ Aktif
12 V to 34 V Vdss 44-pin HTSSOP (DDV) Package
MOQ: 1 |

TAS5622ADDV Genel Bakış

Texas Instruments TAS5622ADDV is a 125 W stereo and 250 W mono PurePath HD Class-D audio power stage with a PWM input, 12 V to 34 V supply range, and a thermally enhanced 44-pin HTSSOP (DDV) package. The device integrates high-side and low-side switching stages, differential inputs, digital audio control, and protection functions in one surface-mount power amplifier.

A Class-D audio amplifier is a switching power amplifier that uses pulse-width-modulated drive signals to transfer energy to a loudspeaker load. It belongs to the audio amplifier hierarchy, which includes linear and nonlinear amplifier implementations. Compared with a conventional linear output stage, an efficient Class-D architecture can reduce heat in the output path while supporting high output power in a compact package.

The TAS5622A family provides 125 W stereo output and 250 W mono operation from a 12 V to 34 V supply. Its PWM input supports digital audio signal chains, while the integrated thermal enhancement and large MOSFET output devices are intended to improve efficiency and reduce losses. The 44-pin HTSSOP package also provides a low-inductance power stage with an exposed thermal pad for board-level heat removal.

Key operating features include automatic mute and a no-noise switch, differential input support, and integrated switching outputs. The device can operate as either a stereo amplifier or a mono bridge-tied amplifier. Its operating-temperature range is -40 °C to 125 °C, making it suitable for industrial, consumer, and automotive-adjacent audio equipment when the complete system meets its applicable qualification requirements.

Typical uses include powered speakers, soundbars, active subwoofers, compact home-theater systems, professional audio equipment, and industrial audio announcement products. A digital-audio processor can feed the PWM input directly, simplifying the signal path in designs that use the PurePath HD architecture.

Thermal management and power-supply layout are the main implementation constraints. Follow the manufacturer reference schematic and PCB layout, place output-filter and supply capacitors according to the datasheet, and provide copper area and thermal vias beneath the exposed pad. The package design does not eliminate the need to verify enclosure temperature, loudspeaker load behavior, and supply ripple under sustained full-power operation.

This product record combines the exact ordering information, package designation, power ratings, voltage range, and product-family description with practical guidance for thermal design, signal integration, sourcing, and drop-in replacement evaluation.

Drop-in alternatifler için TAS5622ADDV — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller TAS5622ADDV (aynı form faktörü ve ayağa oturma) — farklı olan Mono Output Power, Output Topology, Stereo Output Power, Supply Voltage Range, Thermal Enhancement.

Texas Instruments
Mono Output Power: 400 W
Output Topology: Bridge-tied bias
Stereo Output Power: 150 W
İle Karşılaştır TAS5622ADDV →

TAS5624ADDV

✅ Yerleştirme
Texas Instruments
📦 44-pin HTSSOP (DDV)
Class-D audio power amplifier · 1-channel mono or 2-channel stereo · 150 W · 400 W · 12 V to 38 V · PWM input · PurePath HD · Bridge-tied bias

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

TAS5622ADDV Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Class-D audio power amplifier
Stereo Output Power 125 W
Mono Output Power 250 W
Supply Voltage Range 12 V to 34 V
Input Signal Type PWM input
Amplifier Configuration 1-channel mono or 2-channel stereo
Output Topology Class-D
Audio Technology PurePath HD
Paket 44-pin HTSSOP (DDV)
Pin Sayısı 44 pins
Montaj Türü Surface mount
İşletim Sıcaklığı Aralığı -40 °C to 125 °C
Thermal Enhancement Thermally enhanced package
Automatic Mute Supported
No-Noise Switch Supported
Output Device Technology Large MOSFET switching output stage

TAS5622ADDV 44-pin htssop (ddv) Pin Yapısı Kılavuzu

TAS5622ADDV (44-pin htssop (ddv) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

44-pin htssop (ddv) paket pin çizelgesi için TAS5622ADDV

Ayrıntılı pin çıkış verisi mevcut değil: TAS5622ADDV.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

TAS5622ADDV için uygundur 6 uygulamas: Powered Stereo Speaker, Active Subwoofer, Soundbar Audio Output, Home Theater Power Amplifier, Professional Audio Monitor, Industrial Audio Announcer.

🎧

Powered Stereo Speaker

The TAS5622ADDV suits powered stereo speakers requiring up to 125 W per channel from a 12 V to 34 V supply. Its PWM input can receive a compatible digital audio signal directly, while the integrated Class-D output stage drives the loudspeaker outputs efficiently. The 44-pin HTSSOP package integrates the switching devices, but the design still requires the manufacturer reference layout, output filters, and substantial copper around the exposed thermal pad. Sustained high-power operation should be evaluated at the actual enclosure temperature and speaker impedance.

🎧

Active Subwoofer

The TAS5622ADDV can be configured for mono operation at up to 250 W, making it appropriate for an active subwoofer that requires substantial low-frequency power from a single amplifier channel. Its differential PWM architecture supports efficient Class-D conversion and reduces the need for a large linear output stage. In a subwoofer enclosure, thermal design remains critical because low bass content can demand sustained output. Use the Texas Instruments reference schematic and PCB layout, verify the inductor and filter values, and validate peak current and thermal rise with the selected speaker impedance.

📱

Soundbar Audio Output

A soundbar can use the TAS5622ADDV for high-power left and right channels when its 125 W stereo capability matches the speaker design. The PWM input allows a digital audio processor to drive the power stage without an additional analog input path, helping control channel routing and volume in a multi-zone system. The 12 V to 34 V operating range suits higher-power consumer audio rails, while the exposed-pad HTSSOP package requires careful layout to prevent thermal throttling. Peak-power, idle-pop, mute behavior, and output-filter sound quality should be verified during system integration.

📺

Home Theater Power Amplifier

The TAS5622ADDV is suitable for a compact home-theater power amplifier requiring substantial stereo output and efficient amplification. A digital source or surround processor can provide the compatible PWM audio stream, while the Class-D power stage delivers up to 125 W per channel according to its specified operating conditions. Because the device is a high-current switching stage, the power supply, decoupling network, output filters, and ground return must be designed together. Confirm channel synchronization, amplifier mute sequencing, and thermal margins in the finished enclosure.

🎧

Professional Audio Monitor

The TAS5622ADDV can serve as the power stage in a professional near-field monitor when its power rating exceeds the continuous speaker demand and the system uses a compatible digital signal path. The 125 W stereo configuration provides useful headroom for music transients, while the 250 W mono rating supports bridge-tied configurations. Low-frequency behavior depends on the external LC output filter and speaker load, so use the manufacturer reference values rather than treating the power stage as a self-contained loudspeaker driver. Thermal rise and audible distortion should be measured in the final enclosure.

🏭

Industrial Audio Announcer

The TAS5622ADDV can drive high-output industrial audio announcement speakers where high efficiency and a compact surface-mount power stage are valuable. The 12 V to 34 V supply range supports industrial power architectures, and the -40 °C to 125 °C device rating supports a broad environmental range when the assembled product satisfies its own qualification requirements. Industrial installations may introduce long cable runs and highly inductive speaker loads, making output-filter and protection design critical. Validate EMI, ground-fault behavior, thermal performance, and audible artifacts during worst-case announcement conditions.

What is the TAS5622ADDV?
The TAS5622ADDV is a Texas Instruments PurePath HD Class-D audio power amplifier rated for 125 W stereo or 250 W mono operation from a 12 V to 34 V supply. According to the Texas Instruments TAS5622A product page, it uses a PWM input and is packaged in a thermally enhanced 44-pin HTSSOP (DDV). It is intended for high-power audio systems requiring efficient differential digital-drive amplification.
What output power does TAS5622ADDV provide?
The TAS5622ADDV provides up to 125 W per channel in stereo mode and up to 250 W in mono mode. Texas Instruments identifies the device as a 125 W stereo, 250 W mono PurePath HD power stage. The configuration depends on the circuit implementation and operating conditions, so the datasheet test conditions, supply voltage, cooling arrangement, and speaker impedance should be reviewed before assuming rated output is available in every design.
What is the operating voltage of TAS5622ADDV?
The TAS5622ADDV operates from a nominal 12 V to 34 V supply range. The Texas Instruments product page lists this range for the TAS5622A family, while the device includes integrated switching output stages intended for high-power audio loads. The power supply must provide adequate current and low ripple, and PCB layout must follow the manufacturer's reference design to limit switching noise and voltage transients.
Where can I download the TAS5622ADDV datasheet?
The official TAS5622A datasheet can be downloaded from Texas Instruments through the product datasheet link on this page. The document describes the 125 W stereo and 250 W mono Class-D power stage, electrical characteristics, thermal information, pin descriptions, application information, and reference layouts. Use the manufacturer PDF for the DDV package pinout and implementation details because third-party PDF mirrors may not preserve revision identifiers or figures accurately.
Where can I find the TAS5622ADDV pinout?
The TAS5622ADDV pinout is found in the pin-description and package-information sections of the official Texas Instruments TAS5622A datasheet. The device is a 44-pin HTSSOP in the DDV package and includes a thermal enhancement pad. Assign PCB nets from the datasheet pin table rather than relying on package-outline geometry alone, since the exposed pad is tied to a specified power or ground connection in the reference design.
Is TAS5622ADDV suitable for digital audio inputs?
Yes, the TAS5622ADDV accepts a PWM input and is positioned as a digital-input PurePath HD Class-D power stage. This allows it to sit downstream of a compatible digital audio processor, avoiding a separate analog input amplifier in designs using the same audio architecture. Signal timing, filter selection, clocking or synchronization requirements, and output-filter values should be implemented according to the manufacturer reference design.
TAS5622ADDV vs TAS5622ADDVR - what is the difference?
TAS5622ADDV and TAS5622ADDVR identify the same Texas Instruments TAS5622A device configuration, while the final letter distinguishes the orderable packaging format. The electrical description remains 125 W stereo, 250 W mono, 12 V to 34 V, PWM input, and 44-pin HTSSOP. Confirm the reel, tape, and orientation details on the manufacturer ordering page before substituting one shipping format for the other.
Can TAS5624ADDV replace TAS5622ADDV?
TAS5624ADDV is the closest same-brand comparison identified for the TAS5622ADDV because it also appears in a 44-pin DDV family comparison, but it must not be treated as an automatic drop-in replacement. The two devices may have different output-power ratings and thermal limits. Confirm pin-by-pin compatibility, input interface, supply requirements, protection behavior, and the manufacturer reference layout before using TAS5624ADDV in an existing TAS5622ADDV design.
When should I choose TAS5622ADDV instead of a lower-power Class-D amplifier?
Choose the TAS5622ADDV when the target speaker system requires approximately 125 W stereo or 250 W mono capability and the board can provide proper cooling and a 12 V to 34 V power supply. A lower-power amplifier may be preferable for small speakers, low-heat enclosures, or battery-powered products because the TAS5622ADDV's large output stage can demand more supply current. The decision should be based on clean continuous output into the actual load rather than headline power alone.
What is the best drop-in replacement for TAS5622ADDV?
No verified five-part drop-in replacement set was established for the TAS5622ADDV. The identified TAS5624ADDV is a same-brand 44-pin DDV comparison, but published comparison information alone does not prove pin-to-pin electrical equivalence. Treat it as a design-review candidate, not an approved substitution. Before replacing the device, compare every DDV pin, PWM input requirements, power rating, thermal data, output filters, and the Texas Instruments reference PCB.
What can replace TAS5622ADDV in a Class-D audio design?
The replacement must use the same 44-pin HTSSOP DDV footprint and preserve the PWM interface, power rails, output-filter topology, control functions, and thermal requirements. TAS5624ADDV is a same-family candidate that warrants a detailed comparison, while TAS5622ADDVR is an orderable packaging variant rather than an electrically different amplifier. Do not select a generic Class-D amplifier solely because its rated power is similar; its pinout and control architecture must match.
What is the best Texas Instruments equivalent for TAS5622ADDV?
The closest identified Texas Instruments equivalent is TAS5622ADDVR, which represents the same TAS5622A device in a different orderable packaging format. It retains the 125 W stereo, 250 W mono, PWM-input Class-D architecture and 44-pin HTSSOP package. Confirm whether the difference is acceptable for the intended assembly and inventory process. More functionally distinct alternatives such as TAS5624ADDV require a complete electrical and thermal review before substitution.
Where to buy TAS5622ADDV online?
Use the Request a Quote form on this page to request TAS5622ADDV availability, lead time, and ordering information from XAIPART. The exact orderable part is the Texas Instruments 44-pin HTSSOP DDV device, not a related TAS5622A package or reel designation. The request should specify whether the design requires the original ADDV orderable format or whether another manufacturer-approved packing option is acceptable.
What is the price of TAS5622ADDV?
The current commercial terms for TAS5622ADDV are available through the Request a Quote form on this page. The form can provide a quotation based on quantity, delivery requirements, and the exact orderable MPN. Static pricing should not be copied into engineering documentation because component pricing and availability can change independently of the device specifications and lifecycle status.
Is TAS5622ADDV in stock and what is its lead time?
Current TAS5622ADDV inventory and lead time should be confirmed through the Request a Quote form on this page. The part is listed by Texas Instruments and appears in current distributor catalogs, but those listings do not establish a guaranteed stock quantity for a specific production order. Provide forecast quantity, target ship date, and assembly packaging requirements with the request to obtain a firm supply commitment.

Mühendislik referans verileri: TAS5622ADDV — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the TAS5622ADDV when a compact powered speaker, soundbar, subwoofer, monitor, or industrial announcer needs 125 W stereo or 250 W mono operation from a 12 V to 34 V rail and the digital signal chain uses a compatible PWM input. Its 44-pin HTSSOP package integrates the Class-D switching stage but still demands careful thermal and high-current layout. TAS5624ADDV is a same-brand DDV-family candidate when its electrical ratings and pin functions are confirmed against the existing design; it should not be installed solely because the outline matches. For lower-power, battery-limited, or thermally constrained products, choose a lower-power Class-D stage rather than relying on intermittent capability. For systems requiring a different input architecture, select a device designed for that interface and define a new reference layout.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün TAS5624ADDV
Package 44-pin HTSSOP (DDV) 44-pin HTSSOP (DDV)
Brand Texas Instruments Texas Instruments

Ana Farklılayıcılar

  • High-power stereo operation in a single integrated power-stage package (karşılaştırma:TAS5624ADDV)
  • Wide high-voltage operating range for high-power audio rails (karşılaştırma:TAS5624ADDV)
  • Digital-input integration simplifies the PurePath HD signal chain (karşılaştırma:TAS5624ADDV)

Tasarım Notları

Use the Texas Instruments reference PCB and keep the exposed thermal pad directly coupled to a continuous copper area with multiple thermal vias. The 125 W stereo and 250 W mono ratings are operating limits rather than guarantees for every enclosure. Validate junction and case temperature at the highest expected channel load, including sustained bass content, because heat accumulation in a compact enclosure can reduce available output even when the board layout is electrically correct.

Follow the manufacturer power-stage layout for the high-current supply and output paths. Keep input, PWM-control, ground, and power connections separated to reduce switching-node coupling into the audio signal. Place input filtering, local supply decoupling, and output-filter components at the locations shown in the Texas Instruments reference schematic and PCB layout. Deviations should be tested for audible artifacts, unstable switching, and excessive output ripple.

Estimated: power-conversion loss equals output power divided by efficiency minus output power. At 125 W output and an assumed 90% efficiency, the estimated switching-stage input power is 138.9 W and the estimated loss is 13.9 W; at 250 W output with the same assumption, input power is 277.8 W and estimated loss is 27.8 W. These estimates show why supply capacity, copper loss, and enclosure cooling must be reviewed for the actual amplifier operating mode.

Do not confuse the ADDV orderable format with related TAS5622A order codes without checking the manufacturer ordering table. Also do not assume that a device with the same 44-pin DDV outline is automatically compatible: PWM logic levels, exposed-pad connections, control pins, output topology, and protection thresholds must match. Before replacing a fitted TAS5622ADDV, compare every pin and review the output-filter values, supply requirements, and reference layout.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Compliance status is not stated in the available product-page and distributor information. The -40 °C to 125 °C operating-temperature rating does not itself establish AEC-Q100 qualification.

Veri doğrulanma tarihi: 2026-11-20 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

TAS5622ADDV datasheet TAS5622ADDV pinout TAS5622ADDV datasheet pdf TAS5622ADDV equivalent TAS5622ADDV replacement TAS5622ADDV cross reference TAS5622ADDV vs TAS5624ADDV TAS5622ADDV HTSSOP-44 TAS5622ADDV 125W stereo TAS5622ADDV 250W mono TAS5622ADDV price Texas Instruments TAS5622ADDV

İlgili Bileşenler ve Terimler

Texas Instruments TAS5622ADDV TAS5622A TAS5624ADDV PurePath HD Class-D amplifier audio power amplifier PWM input digital audio amplifier 125 W stereo output 250 W mono output 12 V to 34 V supply 44-pin HTSSOP DDV package surface-mount package exposed thermal pad thermal enhancement automatic mute no-noise switch powered speaker active subwoofer soundbar home theater amplifier professional audio monitor industrial audio announcer
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle