TAS5782MDCA - 20W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5782MDCA ✓ सक्रियTAS5782MDCA अवलोकन
A Class-D amplifier is a switching power stage that delivers audio through a high-frequency carrier and an output filter. The TAS5782M belongs to the smart audio amplifier family, adding digital signal processing and digital input control to the basic Class-D output stage. Its 48-pin HTSSOP package combines the amplifier channels, digital interface, processing functions, and power-delivery pins in a single surface-mount component.
Key features include 20 W stereo output, 40 W mono capability, a 4.5 V to 26.4 V supply range, and processing based on a 96-kHz architecture. The 26.4 V maximum supply voltage supports high-voltage audio systems, while the lower operating limit permits use with common single-cell lithium battery systems. The digital-input architecture avoids passing analog audio through a long board-level signal path.
The device uses closed-loop Class-D operation, in which the amplifier monitors its output to reduce distortion and improve linearity. Integrated protection functions include short-circuit and thermal protection. Because the package combines analog power conversion, digital control, and signal processing, layout must separate sensitive digital and analog connections from the high-current switching and loudspeaker-output paths.
Typical applications include sound bars, smart speakers, television and monitor audio, wireless speakers, compact consumer audio systems, and multimedia equipment. In a sound bar, the device can drive stereo speaker pairs while receiving a digital audio stream from a source processor. In a smart speaker, its digital input can shorten the analog signal chain and reduce susceptibility to board-level noise.
Layout should provide a low-impedance ground and supply plane, place input and decoupling capacitors close to their associated pins, and route output-node and high-current supply paths away from signal and control pins. Thermal performance depends on the PCB copper area available for heat dissipation and on the sustained output power, so verify junction-temperature margin at the highest expected channel load.
This page organizes the device specifications, pin-package information, application guidance, comparison details, and practical design considerations into one engineering reference. It also documents the constraints that determine when the TAS5782MDCA is appropriate and where a different amplifier or package option should be considered.
के लिए ड्रॉप-इन विकल्प TAS5782MDCA — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
TAS5782MDCAR
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TAS5782MDCA Maximum Ratings और Electrical Characteristics
| Device Type | 2-channel stereo Class-D smart audio amplifier |
| आउटपुट प्रकार | 2-channel stereo, also configurable for mono operation |
| Maximum Stereo Output Power | 20 W per channel |
| Maximum Mono Output Power | 40 W |
| Supply Voltage Range | 4.5 V to 26.4 V |
| Processing Architecture | Up to 96 kHz |
| Audio Input Type | Digital input |
| Amplifier Topology | Closed-loop Class-D |
| Input Configuration | Differential inputs |
| Protection Features | Short-circuit protection and thermal protection |
| ऑपरेटिंग तापमान | -25 °C to 85 °C |
| पैकेज | HTSSOP-48 (DCA) |
| माउंटिंग प्रकार | Surface mount |
TAS5782MDCA htssop-48 (dca) पिन कॉन्फ़िगरेशन गाइड
TAS5782MDCA (htssop-48 (dca) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TAS5782MDCA.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TAS5782MDCA के लिए उपयुक्त है 6 अनुप्रयोगs: Sound Bar Speaker Drive, Smart Speaker and Wireless Audio, Television and Monitor Audio, Wireless Network Speaker, Gaming Console and Multimedia Hub, Digital-Input Automotive Audio.
Sound Bar Speaker Drive
The TAS5782MDCA fits a sound bar that requires two amplified channels and a compact board area. Its 20 W per-channel stereo capability and digital audio input allow the amplifier to receive audio directly from a sound-bar processor, keeping the analog output path short. The 4.5 V to 26.4 V supply range accommodates common low-voltage system rails as well as higher-voltage designs. Place the output filters close to the amplifier, preserve symmetric differential routing, and verify continuous-power dissipation against the available HTSSOP copper area.
अनुशंसित
Smart Speaker and Wireless Audio
The TAS5782MDCA supports smart-speaker designs that use a digital audio stream and need integrated amplification plus processing. Digital input helps reduce analog trace length and keeps the amplifier closer to its loudspeaker output stage, while the 96-kHz processing architecture supports high-resolution audio designs. Its 20 W stereo rating is appropriate for compact two-driver or single-driver combinations when the speaker impedance and thermal conditions match. Firmware control, clocking, and the digital interface must be validated together rather than treated as separate analog blocks.
अनुशंसित
Television and Monitor Audio
The TAS5782MDCA is suitable for television, monitor, and compact multimedia audio boards requiring more output power than a small integrated headphone or line-level amplifier can provide. Digital input supports connection to the main audio processor, and 20 W per channel covers typical compact stereo speaker arrangements. The 4.5 V minimum operating voltage allows operation from a low-voltage system rail, while the 26.4 V maximum accommodates higher-voltage designs. Confirm channel population, idle-pop behavior, amplifier configuration, and thermal margins during sustained playback.
अनुशंसित
Wireless Network Speaker
The TAS5782MDCA can serve as the output stage of a wireless network speaker after a Wi-Fi or Bluetooth audio module converts the received stream into a digital audio format. Its digital input avoids additional analog conversion at the speaker, and 20 W per channel supports common compact stereo products. Up to 40 W mono operation can be used for single-speaker arrangements when the manufacturer configuration is followed. Power-system design must account for battery behavior, supply transients, amplifier efficiency, thermal rise, and loudspeaker excursion rather than output power alone.
अनुशंसित
Gaming Console and Multimedia Hub
The TAS5782MDCA is applicable to gaming consoles, multimedia hubs, and compact entertainment systems that accept digital audio and drive stereo speakers. The combination of digital input, integrated processing, and 20 W per-channel output reduces the need for a separate analog-output stage. Its broad 4.5 V to 26.4 V operating range offers flexibility across low-voltage portable and higher-voltage stationary power architectures. Design validation should include digital-clock integrity, latency, channel mapping, output-filter selection, and sustained thermal performance.
अनुशंसित
Digital-Input Automotive Audio
The TAS5782MDCA can serve as a digital-input amplifier stage in an automotive audio subsystem when the vehicle electrical environment, qualification requirements, and acoustic targets are satisfied. Differential inputs help reject board-level noise, and the 96-kHz processing architecture supports high-resolution audio pipelines. Its 4.5 V to 26.4 V supply range must be reconciled with the vehicle rail through appropriate regulation. Before adoption, confirm automotive qualification status, electromagnetic requirements, load-dump exposure, start-up behavior, and temperature limits for the complete product.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TAS5782MDCA — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TAS5782MDCAR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | HTSSOP-48 (DCA) | HTSSOP-48 (DCA) |
| Amplifier Type | 2-channel stereo Class-D smart audio amplifier | 2-channel stereo Class-D smart audio amplifier |
| Stereo Output Power | 20 W per channel | 20 W per channel |
| Mono Output Power | 40 W | 40 W |
| Supply Voltage Range | 4.5 V to 26.4 V | 4.5 V to 26.4 V |
| Processing Architecture | Up to 96 kHz | Up to 96 kHz |
| Input Type | Digital input with differential inputs | Digital input with differential inputs |
| Protection Features | Short-circuit protection and thermal protection | Short-circuit protection and thermal protection |
मुख्य विशेषताएँ
- Digital-input stereo amplification with integrated processing (बनामTAS5782MDCAR)
- Wide operating-voltage range for portable and stationary systems (बनामTAS5782MDCAR)
- Same 48-pin DCA land pattern (बनामTAS5782MDCAR)
डिज़ाइन नोट्स
Estimated: with both channels delivering 20 W into 4 ohms from a 24 V supply, the theoretical output power is 40 W and the ideal input power is approximately 43.3 W. Actual device dissipation depends on Class-D efficiency, output-filter losses, and signal content, so use the manufacturer efficiency and thermal-resistance curves for the final junction-temperature calculation. Provide the recommended HTSSOP land pattern and as much uninterrupted copper as the board outline permits.
Route the two high-current speaker outputs and supply-current paths as short, wide traces that do not share narrow copper with digital control nets. Place output inductors and capacitors close to the amplifier output pins according to the manufacturer application circuit. Differential input and digital interface traces should be short, symmetrical, and referenced to a continuous ground plane, with no switching-node copper beneath sensitive signal paths.
Do not treat the 40 W mono capability as an unrestricted continuous rating for every speaker and power-supply combination. Confirm the exact output configuration, output filters, load impedance, supply voltage, thermal conditions, and clipping limits in the data sheet. Also verify the digital clock, interface levels, and configuration sequence, since incorrect digital-interface timing or an unsuitable power rail can prevent the amplifier from operating normally.
A Class-D output stage produces high-current switching edges, so PCB layout usually dominates electromagnetic-emission performance. Keep the switching loop compact, connect the exposed pad to a low-impedance ground structure, and avoid routing sensitive inputs beside output-current paths. Validate conducted and radiated emissions on the final product because enclosure, cables, speakers, and power-supply topology can change compliance results.
अनुपालन जानकारी
The listed manufacturer and distributor information identifies the device as active but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations from the Texas Instruments product page or an authoritative compliance document before release.