Texas Instruments

TAS5782MDCA - 20W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5782MDCA ✓ نشط
4.5 V to 26.4 V Vdss HTSSOP-48 (DCA) Package
الحد الأدنى للطلب: 1 |

TAS5782MDCA نظرة عامة

The Texas Instruments TAS5782MDCA is a 2-channel stereo Class-D smart audio amplifier with digital input, integrated audio processing, and up to 96-kHz processing architecture. It delivers 20 W per channel into stereo loads or 40 W in mono operation, operates from 4.5 V to 26.4 V, and is offered in a 48-pin HTSSOP (DCA) surface-mount package. Differential inputs, short-circuit protection, and thermal protection support robust loudspeaker drive applications.

A Class-D amplifier is a switching power stage that delivers audio through a high-frequency carrier and an output filter. The TAS5782M belongs to the smart audio amplifier family, adding digital signal processing and digital input control to the basic Class-D output stage. Its 48-pin HTSSOP package combines the amplifier channels, digital interface, processing functions, and power-delivery pins in a single surface-mount component.

Key features include 20 W stereo output, 40 W mono capability, a 4.5 V to 26.4 V supply range, and processing based on a 96-kHz architecture. The 26.4 V maximum supply voltage supports high-voltage audio systems, while the lower operating limit permits use with common single-cell lithium battery systems. The digital-input architecture avoids passing analog audio through a long board-level signal path.

The device uses closed-loop Class-D operation, in which the amplifier monitors its output to reduce distortion and improve linearity. Integrated protection functions include short-circuit and thermal protection. Because the package combines analog power conversion, digital control, and signal processing, layout must separate sensitive digital and analog connections from the high-current switching and loudspeaker-output paths.

Typical applications include sound bars, smart speakers, television and monitor audio, wireless speakers, compact consumer audio systems, and multimedia equipment. In a sound bar, the device can drive stereo speaker pairs while receiving a digital audio stream from a source processor. In a smart speaker, its digital input can shorten the analog signal chain and reduce susceptibility to board-level noise.

Layout should provide a low-impedance ground and supply plane, place input and decoupling capacitors close to their associated pins, and route output-node and high-current supply paths away from signal and control pins. Thermal performance depends on the PCB copper area available for heat dissipation and on the sustained output power, so verify junction-temperature margin at the highest expected channel load.

This page organizes the device specifications, pin-package information, application guidance, comparison details, and practical design considerations into one engineering reference. It also documents the constraints that determine when the TAS5782MDCA is appropriate and where a different amplifier or package option should be considered.

بدائل مباشرة لـ TAS5782MDCA — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

TAS5782MDCAR

✅ بديل مباشر
📦 HTSSOP-48 (DCA)
Same 20 W stereo, 40 W mono, 4.5 V to 26.4 V ratings and DCA footprint; reel-packaging order form rather than the base catalog number

📋 بديل مرجعي (غير موجود في الكتالوج)

TAS5782MDCA الحدود القصوى والخصائص الكهربائية

Device Type 2-channel stereo Class-D smart audio amplifier
نوع الخرج 2-channel stereo, also configurable for mono operation
Maximum Stereo Output Power 20 W per channel
Maximum Mono Output Power 40 W
Supply Voltage Range 4.5 V to 26.4 V
Processing Architecture Up to 96 kHz
Audio Input Type Digital input
Amplifier Topology Closed-loop Class-D
Input Configuration Differential inputs
Protection Features Short-circuit protection and thermal protection
درجة حرارة التشغيل -25 °C to 85 °C
العلبة HTSSOP-48 (DCA)
نوع التركيب Surface mount

دليل تكوين أطراف TAS5782MDCA htssop-48 (dca)

تكوين الأطراف لـ TAS5782MDCA (حزمة htssop-48 (dca)). يتميز هذا المكوّن التناظري بأطراف الإدخال والإخراج وإمداد الطاقة. راجع ورقة بيانات الشركة المصنعة لتكوينات طرف إلغاء الإزاحة والتعويض والتمكين. مثالي لدوائر تكييف الإشارة والمضخمات.

مخطط توزيع أطراف حزمة htssop-48 (dca) لـ TAS5782MDCA

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ TAS5782MDCA.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

TAS5782MDCA مناسب لـ 6 التطبيقs: Sound Bar Speaker Drive, Smart Speaker and Wireless Audio, Television and Monitor Audio, Wireless Network Speaker, Gaming Console and Multimedia Hub, Digital-Input Automotive Audio.

🔊

Sound Bar Speaker Drive

The TAS5782MDCA fits a sound bar that requires two amplified channels and a compact board area. Its 20 W per-channel stereo capability and digital audio input allow the amplifier to receive audio directly from a sound-bar processor, keeping the analog output path short. The 4.5 V to 26.4 V supply range accommodates common low-voltage system rails as well as higher-voltage designs. Place the output filters close to the amplifier, preserve symmetric differential routing, and verify continuous-power dissipation against the available HTSSOP copper area.

🧩

Smart Speaker and Wireless Audio

The TAS5782MDCA supports smart-speaker designs that use a digital audio stream and need integrated amplification plus processing. Digital input helps reduce analog trace length and keeps the amplifier closer to its loudspeaker output stage, while the 96-kHz processing architecture supports high-resolution audio designs. Its 20 W stereo rating is appropriate for compact two-driver or single-driver combinations when the speaker impedance and thermal conditions match. Firmware control, clocking, and the digital interface must be validated together rather than treated as separate analog blocks.

📺

Television and Monitor Audio

The TAS5782MDCA is suitable for television, monitor, and compact multimedia audio boards requiring more output power than a small integrated headphone or line-level amplifier can provide. Digital input supports connection to the main audio processor, and 20 W per channel covers typical compact stereo speaker arrangements. The 4.5 V minimum operating voltage allows operation from a low-voltage system rail, while the 26.4 V maximum accommodates higher-voltage designs. Confirm channel population, idle-pop behavior, amplifier configuration, and thermal margins during sustained playback.

🌐

Wireless Network Speaker

The TAS5782MDCA can serve as the output stage of a wireless network speaker after a Wi-Fi or Bluetooth audio module converts the received stream into a digital audio format. Its digital input avoids additional analog conversion at the speaker, and 20 W per channel supports common compact stereo products. Up to 40 W mono operation can be used for single-speaker arrangements when the manufacturer configuration is followed. Power-system design must account for battery behavior, supply transients, amplifier efficiency, thermal rise, and loudspeaker excursion rather than output power alone.

🖥️

Gaming Console and Multimedia Hub

The TAS5782MDCA is applicable to gaming consoles, multimedia hubs, and compact entertainment systems that accept digital audio and drive stereo speakers. The combination of digital input, integrated processing, and 20 W per-channel output reduces the need for a separate analog-output stage. Its broad 4.5 V to 26.4 V operating range offers flexibility across low-voltage portable and higher-voltage stationary power architectures. Design validation should include digital-clock integrity, latency, channel mapping, output-filter selection, and sustained thermal performance.

🚗

Digital-Input Automotive Audio

The TAS5782MDCA can serve as a digital-input amplifier stage in an automotive audio subsystem when the vehicle electrical environment, qualification requirements, and acoustic targets are satisfied. Differential inputs help reject board-level noise, and the 96-kHz processing architecture supports high-resolution audio pipelines. Its 4.5 V to 26.4 V supply range must be reconciled with the vehicle rail through appropriate regulation. Before adoption, confirm automotive qualification status, electromagnetic requirements, load-dump exposure, start-up behavior, and temperature limits for the complete product.

What is the TAS5782MDCA used for?
The TAS5782MDCA is a Texas Instruments 2-channel digital-input Class-D smart audio amplifier designed for stereo speaker drive and mono operation. According to the Texas Instruments TAS5782M product information, it provides 20 W per channel in stereo, up to 40 W in mono, and operates from 4.5 V to 26.4 V. Its integrated processing and digital interface suit sound bars, smart speakers, television audio, and other compact consumer-audio systems.
How much power can the TAS5782MDCA deliver?
The TAS5782MDCA delivers 20 W per channel in a stereo configuration and can be combined for 40 W mono output. These power ratings describe the device family capability rather than a guarantee for every speaker impedance, supply voltage, and thermal layout. Confirm the specified test conditions, continuous-output requirement, PCB copper area, and allowable junction temperature in the manufacturer data sheet before releasing a production design.
What is the operating voltage of the TAS5782MDCA?
The TAS5782MDCA operates from 4.5 V to 26.4 V, as stated on the Texas Instruments product page and distributor part listings. That range covers common single-cell battery systems at the low end and higher-voltage audio rails at the upper end. Provide local decoupling close to the supply pins and verify that every attached audio processor operates within the amplifier's supported interface and supply conditions.
Which package does the TAS5782MDCA use?
The TAS5782MDCA is packaged in the 48-pin HTSSOP package identified as DCA by Texas Instruments. It is a surface-mount package intended for reflow assembly and requires careful PCB layout because it combines digital control, analog signal paths, switching power stages, and high-current speaker outputs. The manufacturer package drawing and land-pattern guidance in the data sheet define the board footprint and exposed-pad requirements.
Where can I download the TAS5782MDCA datasheet?
The official TAS5782MDCA documentation is available through the Texas Instruments TAS5782M product page and the TI part-details listing for TAS5782MDCA. Use the manufacturer data sheet for the authoritative pin description, recommended application circuit, absolute maximum ratings, thermal data, and PCB-layout guidance. Third-party document mirrors can aid discovery, but the TI-hosted copy is the appropriate baseline for design release.
Where can I find the TAS5782MDCA pinout?
The authoritative TAS5782MDCA pin assignment is presented in the pin-configuration and terminal-description sections of the Texas Instruments data sheet. The device uses a 48-pin HTSSOP package with DCA package identification. Because the exposed pad, supply pins, output pins, control interface, and ground connections must be assigned exactly as specified, do not derive the board layout from an informal pin image; use the manufacturer package drawing and pin table.
What is the difference between TAS5782MDCA and TAS5782MDCAR?
TAS5782MDCAR identifies the reel-packaging order form of the same TAS5782MDCA device configuration, while TAS5782MDCA is the base catalog number. The listed electrical function remains a 20 W stereo, 40 W mono, 4.5 V to 26.4 V digital-input Class-D smart audio amplifier in the 48-pin HTSSOP DCA package. When evaluating a substitution, distinguish mechanical shipping format from functional or pin-level compatibility.
Can the TAS5782MDCA drive a mono speaker at 40 W?
The TAS5782MDCA supports mono operation with up to 40 W output, according to the Texas Instruments device description. Bridging the two amplifier channels is a configuration technique rather than simply paralleling two outputs, so the system design must follow the manufacturer application guidance. Verify speaker impedance, supply voltage, channel configuration, thermal margin, and output-filter requirements before using the 40 W rating.
Is the TAS5782MDCA suitable for a sound bar?
Yes, the TAS5782MDCA is well matched to sound bars and other digital-audio products because it combines stereo Class-D output, digital input, and integrated audio processing. Its 20 W per-channel capability suits compact stereo speaker pairs, while the 4.5 V to 26.4 V operating range supports both battery-derived and higher-voltage system rails. Sound-bar designers should still allocate PCB area for thermal dissipation and keep switching-current paths isolated from digital control traces.
When should I choose the TAS5782MDCA instead of an analog-input amplifier?
Choose the TAS5782MDCA when the audio source can provide a digital signal and the design benefits from on-device processing or digital volume and configuration control. An analog-input amplifier is more appropriate when only analog audio is available or when a simple analog signal chain is required. The choice depends on source format, control architecture, system latency, software support, and the need to keep analog routing short.
What is the best TI alternative to the TAS5782MDCA?
The closest identified same-family option is the reel-packaged form of the same device configuration, but it is a packaging alternative rather than a different amplifier. A meaningful functional replacement must match the 48-pin HTSSOP footprint, digital interface, supply range, channel configuration, processing features, and required protection behavior. Use the Texas Instruments cross-reference search and the manufacturer pin tables before treating another smart audio amplifier as a drop-in substitution.
What can replace the TAS5782MDCA?
A replacement should provide the same 48-pin HTSSOP footprint, digital audio interface, 4.5 V to 26.4 V operating range, differential input architecture, and compatible control and processing functions. The reel-packaged order form is the closest identified match, while packages with different pin counts or interfaces should be treated as functional alternatives requiring a board redesign. Verify pinout, supply sequencing, output filtering, and thermal performance against the manufacturer data sheet.
Does the TAS5782MDCA have short-circuit and thermal protection?
Yes, the Texas Instruments part information identifies short-circuit protection and thermal protection as features of the TAS5782M device family. These protections improve robustness when a speaker load faults or internal dissipation becomes excessive. They do not remove the need for correct speaker impedance, adequate copper area, stable supply decoupling, and system-level thermal validation, particularly during sustained high-power playback.
How do I lay out the TAS5782MDCA PCB?
Place input, supply, and output-filter components close to their associated device pins, provide a continuous ground reference, and keep high-current speaker and switching paths away from digital control traces. Use the exposed-pad and copper-area recommendations in the manufacturer data sheet because the HTSSOP-48 package relies on PCB copper for heat dissipation. Differential routing should be symmetrical and short to reduce noise pickup and data-skew effects.
What are the key specifications engineers should know about the TAS5782MDCA?
The key engineering specifications are 20 W per-channel stereo output, up to 40 W mono operation, a 4.5 V to 26.4 V supply range, digital input, differential inputs, closed-loop Class-D operation, processing up to 96 kHz, and a 48-pin HTSSOP DCA package. Texas Instruments also identifies differential inputs, short-circuit protection, and thermal protection. Designers should additionally validate output-filter, thermal, and interface details for the finished product.
Where can I buy the TAS5782MDCA and what is its lead time?
Use the Request a Quote form on this page to request current TAS5782MDCA pricing, stock confirmation, packaging details, and lead time for your production quantity. The available schedule depends on supplier inventory, order volume, and the exact shipping format requested. Volume breaks and current commercial terms should be confirmed through the quote workflow before a purchase order is released.

بيانات مرجعية هندسية لـ TAS5782MDCA — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the TAS5782MDCA when a design requires a digital-input, two-channel Class-D amplifier with 20 W per channel of stereo capability and up to 40 W in mono operation. Its integrated processing and 96-kHz architecture suit sound bars, smart speakers, televisions, and compact multimedia products. The 4.5 V to 26.4 V range supports both low-voltage portable rails and higher-voltage stationary architectures. TAS5782MDCAR is functionally and mechanically equivalent but represents the reel-packaging order form, so select it when that exact shipping configuration is required. Do not treat an amplifier with a different package, input interface, processing architecture, or supply rating as a drop-in replacement without a complete pin, clocking, thermal, and system-level review. For designs requiring analog input, a different output-power class, or a smaller footprint, evaluate a different device family and redesign the associated routing and filtering.

المقارنة مع البدائل

المعامل هذا المنتج TAS5782MDCAR
Brand Texas Instruments Texas Instruments
Package HTSSOP-48 (DCA) HTSSOP-48 (DCA)
Amplifier Type 2-channel stereo Class-D smart audio amplifier 2-channel stereo Class-D smart audio amplifier
Stereo Output Power 20 W per channel 20 W per channel
Mono Output Power 40 W 40 W
Supply Voltage Range 4.5 V to 26.4 V 4.5 V to 26.4 V
Processing Architecture Up to 96 kHz Up to 96 kHz
Input Type Digital input with differential inputs Digital input with differential inputs
Protection Features Short-circuit protection and thermal protection Short-circuit protection and thermal protection

أبرز الفروقات

  • Digital-input stereo amplification with integrated processing (مقابلTAS5782MDCAR)
  • Wide operating-voltage range for portable and stationary systems (مقابلTAS5782MDCAR)
  • Same 48-pin DCA land pattern (مقابلTAS5782MDCAR)

ملاحظات التصميم

Estimated: with both channels delivering 20 W into 4 ohms from a 24 V supply, the theoretical output power is 40 W and the ideal input power is approximately 43.3 W. Actual device dissipation depends on Class-D efficiency, output-filter losses, and signal content, so use the manufacturer efficiency and thermal-resistance curves for the final junction-temperature calculation. Provide the recommended HTSSOP land pattern and as much uninterrupted copper as the board outline permits.

Route the two high-current speaker outputs and supply-current paths as short, wide traces that do not share narrow copper with digital control nets. Place output inductors and capacitors close to the amplifier output pins according to the manufacturer application circuit. Differential input and digital interface traces should be short, symmetrical, and referenced to a continuous ground plane, with no switching-node copper beneath sensitive signal paths.

Do not treat the 40 W mono capability as an unrestricted continuous rating for every speaker and power-supply combination. Confirm the exact output configuration, output filters, load impedance, supply voltage, thermal conditions, and clipping limits in the data sheet. Also verify the digital clock, interface levels, and configuration sequence, since incorrect digital-interface timing or an unsuitable power rail can prevent the amplifier from operating normally.

A Class-D output stage produces high-current switching edges, so PCB layout usually dominates electromagnetic-emission performance. Keep the switching loop compact, connect the exposed pad to a low-impedance ground structure, and avoid routing sensitive inputs beside output-current paths. Validate conducted and radiated emissions on the final product because enclosure, cables, speakers, and power-supply topology can change compliance results.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The listed manufacturer and distributor information identifies the device as active but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations from the Texas Instruments product page or an authoritative compliance document before release.

عمليات بحث ذات صلة

TAS5782MDCA datasheet TAS5782MDCA datasheet pdf TAS5782MDCA pinout TAS5782MDCA HTSSOP-48 pinout TAS5782MDCA equivalent TAS5782MDCA replacement TAS5782MDCA cross reference TAS5782MDCA vs TAS5782MDCAR TAS5782MDCA application circuit TAS5782MDCA sound bar amplifier TAS5782MDCA 20W stereo amplifier Texas Instruments TAS5782MDCA TAS5782MDCA price TAS5782MDCA stock TAS5782MDCA buy

المكونات والمصطلحات ذات الصلة

Texas Instruments TAS5782MDCA TAS5782MDCAR TAS5782M Class-D amplifier smart audio amplifier closed-loop amplifier digital input amplifier audio processor differential input 20 W stereo output 40 W mono output 4.5 V to 26.4 V supply 96 kHz processing architecture HTSSOP-48 DCA package surface-mount package short-circuit protection thermal protection sound bar smart speaker television audio digital audio interface speaker output filter
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر