TJA1028T/3V3/20:11 - 3.3V LIN Transceiver | NXP
MPN: TJA1028T/3V3/20:11 ✓ सक्रियTJA1028T/3V3/20:11 अवलोकन
A LIN transceiver is an interface integrated circuit that connects a low-speed serial bus to a host microcontroller. LIN belongs to the vehicle network hierarchy alongside CAN, Ethernet, and other automotive communication buses. Its lower signaling complexity makes it useful for distributed switches, sensors, lamps, actuators, door modules, and other body electronics. The TJA1028 combines this physical-layer interface with local regulated power, reducing component count in space-constrained automotive nodes.
The TJA1028 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. This 3.3 V version provides a regulated 3.3 V output for local circuitry, while the product family is also available in a 5.0 V regulator configuration. NXP identifies strong electrostatic-discharge robustness as a design feature, an important consideration for wired vehicle networks exposed to connector transients and conducted disturbances.
The 850 uA supply current in the product listing supports low-quiescent-current operation in parked or partially active vehicle systems. The manufacturer's datasheet also identifies a 6 us transceiver specification, while the integrated regulator provides up to 70 mA for a local load. These characteristics make the TJA1028 useful when the communication interface and a small regulated supply share the same compact electronic control unit.
Typical uses include LIN door modules, seat and lighting controllers, climate-control subnodes, body control interfaces, and compact automotive sensor nodes. The device can reduce board area by combining the LIN transceiver and regulator while retaining standardized LIN bus behavior. Its 8-pin SOIC package also simplifies assembly and inspection compared with larger automotive interface packages.
The main design consideration is to allocate the integrated regulator's 70 mA capability carefully and to maintain the bus, ground, and supply connections required by the manufacturer's application guidance. Decoupling, protection, PCB return paths, and LIN waveform verification remain essential because the transceiver operates in electrically harsh vehicle environments.
This product record combines the manufacturer's functional information with package details, compatible family variants, application guidance, and design considerations to support faster component selection and PCB planning.
के लिए ड्रॉप-इन विकल्प TJA1028T/3V3/20:11 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
TJA1028T/3V3/10:11
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/10/2Z
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/20/DZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/20/1U
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/20/DZ,118
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/20:11 विशेषताएं
| Product Type | LIN bus transceiver with integrated voltage regulator |
| LIN Bus Compliance | LIN 2.0 and LIN 2.1 |
| Automotive Network Compliance | SAE J2602 and ISO 17987-4:2016 for 12 V systems |
| Integrated Regulator Output | 3.3 V |
| Integrated Regulator Current | 70 mA maximum |
| सप्लाई करंट | 850 uA |
| Transceiver Performance | 6 us |
| Bus System | LIN local interconnect network |
| Transceiver Count | 1 transceiver |
| पैकेज | 8-pin SOIC |
| Terminal Count | 8 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| माउंटिंग प्रकार | Surface mount |
| Electrostatic Discharge Robustness | Strong ESD robustness |
| Automotive Bus Voltage | 12 V class |
TJA1028T/3V3/20:11 rectangular पिन कॉन्फ़िगरेशन गाइड
TJA1028T/3V3/20:11 (rectangular पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TJA1028T/3V3/20:11.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TJA1028T/3V3/20:11 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive LIN Door Module, Body Lighting Controller, Automotive Sensor Node, Climate-Control Subnode, Seat and Switch Controller, Compact LIN Actuator Interface.
Automotive LIN Door Module
The TJA1028T/3V3/20:11 fits a door-control node that connects switches, latch actuators, and local sensors to a LIN subnetwork. Its LIN 2.0/2.1 behavior and SAE J2602 and ISO 17987-4:2016 compatibility support standardized 12 V vehicle-network communication. The integrated 3.3 V regulator can provide up to 70 mA to low-power local circuitry, reducing the need for a separate regulator and saving board area in the compact module.
अनुशंसित
Body Lighting Controller
A LIN-connected body lighting controller can use the TJA1028T/3V3/20:11 as both its bus interface and local 3.3 V supply source. The 850 uA supply current is useful for parked or intermittently active vehicle systems, while the integrated regulator can deliver up to 70 mA for logic and low-current drivers. Its 8-pin SOIC package supports compact PCB construction, although automotive transient protection and grounding must be designed around the LIN connection.
अनुशंसित
Automotive Sensor Node
The TJA1028T/3V3/20:11 is appropriate for a compact remote sensor node that reports measurements over LIN and needs a regulated local supply. The device combines a standardized LIN physical layer with a 3.3 V output capable of supplying up to 70 mA, allowing a sensor interface to operate without a separate 3.3 V regulator. The 6 us transceiver specification and 850 uA supply-current listing make the family suitable for low-power body-electronics nodes, subject to the exact bus timing and load limits in the datasheet.
अनुशंसित
Climate-Control Subnode
A climate-control subnode can use the TJA1028T/3V3/20:11 to communicate over LIN while powering a small amount of local control logic from its integrated regulator. The 3.3 V output and 70 mA regulator capability suit sensor conditioning, status indicators, and interface circuits without imposing the board-area cost of a discrete regulator. NXP's strong electrostatic-discharge robustness is relevant for this wired vehicle environment, although connector protection and automotive EMC validation remain essential.
अनुशंसित
Seat and Switch Controller
Seat-position switches and related comfort-system modules often use a distributed LIN topology to reduce wiring. The TJA1028T/3V3/20:11 provides the required LIN physical-layer function and a local 3.3 V rail in one 8-pin SOIC device. Its integrated regulator can deliver up to 70 mA, while the 850 uA supply current helps control standby consumption. The controller still requires the prescribed LIN bus components, a suitable return path, and protection appropriate to the vehicle harness.
अनुशंसित
Compact LIN Actuator Interface
The TJA1028T/3V3/20:11 can serve as the communication and local-supply section of a compact LIN actuator interface. Standardized LIN 2.0/2.1 support and 12 V automotive-network compliance make it appropriate for electromechanical nodes that require a host-independent bus connection. The 3.3 V regulator can support up to 70 mA of control electronics, but it should not be used to power a high-current actuator directly. High-current drive stages require separate transistor and protection design.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TJA1028T/3V3/20:11 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TJA1028T/3V3/10:11 | TJA1028T/3V3/10/2Z | TJA1028T/3V3/20/DZ | TJA1028T/3V3/20/1U | TJA1028T/3V3/20/DZ,118 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | SOIC-8 | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package | SOIC-8 - same package |
| Integrated Regulator Output | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Integrated Regulator Current | 70 mA maximum | 70 mA maximum for the TJA1028 3.3 V family variant | 70 mA maximum for the TJA1028 3.3 V family variant | 70 mA maximum for the TJA1028 3.3 V family variant | 70 mA maximum for the TJA1028 3.3 V family variant | 70 mA maximum for the TJA1028 3.3 V family variant |
| LIN Compliance | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family | LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family |
| Automotive Network | 12 V | 12 V | 12 V | 12 V | 12 V | 12 V |
मुख्य विशेषताएँ
- Combines the LIN transceiver and a local 3.3 V regulator (बनामTJA1028T/3V3/10:11)
- Supports compact 12 V automotive LIN nodes (बनामTJA1028T/3V3/20/DZ)
- Provides local regulated power alongside bus communication (बनामTJA1028T/3V3/20/1U)
डिज़ाइन नोट्स
Treat the integrated 3.3 V regulator as a 70 mA auxiliary supply, not as the source for a high-current actuator. Budget the transceiver, pull-up network, local logic, and transient currents together so the regulator does not enter limiting during startup or bus activity. Verify the exact dropout, current-limit, thermal, and load-transient limits in the NXP TJA1028 datasheet before finalizing the power budget.
Follow the NXP recommended application layout for the LIN and supply pins, including short connections, a low-impedance ground return, and correct placement of the required external capacitors. Keep the LIN route away from switching nodes and noisy power-conversion loops. Confirm the footprint and pin orientation against the 8-pin SOIC package drawing before releasing artwork, because suffix variants can use the same mechanical package with different ordering conditions.
The LIN interface is connected to a vehicle wiring harness and can be exposed to conducted and radiated disturbances. Implement the protection network and grounding arrangement recommended for the LIN bus, and test both dominant and recessive bus waveforms with representative harness loading. NXP identifies strong ESD robustness, but that device-level feature does not replace connector protection, filtering, or system-level EMC validation.
Do not substitute a 5.0 V TJA1028 variant for the 3.3 V device without revisiting the complete local power architecture. Conversely, changing between TJA1028T/3V3 suffixes can affect temperature class, qualification, and packing even when the regulator voltage remains 3.3 V. Check the manufacturer ordering information, pinout, absolute-maximum ratings, and qualification markings for every engineering change.
अनुपालन जानकारी
The manufacturer identifies LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for this ordering suffix require confirmation from NXP.