NXP Semiconductors

TJA1028T/3V3/20:11 - 3.3V LIN Transceiver | NXP

부품 번호: TJA1028T/3V3/20:11 ✓ 활성
850 uA Vdss 70 mA maximum Id 8-pin SOIC Package
MOQ: 1 |

TJA1028T/3V3/20:11 개요

The NXP Semiconductors TJA1028T/3V3/20:11 is a 3.3 V LIN 2.0/2.1 bus transceiver with an integrated low-dropout voltage regulator, a supply current of 850 uA, and a 6 us transceiver performance figure, housed in an 8-pin SOIC package. The integrated regulator can deliver up to 70 mA, allowing the device to support compact local interconnect network nodes without requiring a separate 3.3 V regulator.

A LIN transceiver is an interface integrated circuit that connects a low-speed serial bus to a host microcontroller. LIN belongs to the vehicle network hierarchy alongside CAN, Ethernet, and other automotive communication buses. Its lower signaling complexity makes it useful for distributed switches, sensors, lamps, actuators, door modules, and other body electronics. The TJA1028 combines this physical-layer interface with local regulated power, reducing component count in space-constrained automotive nodes.

The TJA1028 supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. This 3.3 V version provides a regulated 3.3 V output for local circuitry, while the product family is also available in a 5.0 V regulator configuration. NXP identifies strong electrostatic-discharge robustness as a design feature, an important consideration for wired vehicle networks exposed to connector transients and conducted disturbances.

The 850 uA supply current in the product listing supports low-quiescent-current operation in parked or partially active vehicle systems. The manufacturer's datasheet also identifies a 6 us transceiver specification, while the integrated regulator provides up to 70 mA for a local load. These characteristics make the TJA1028 useful when the communication interface and a small regulated supply share the same compact electronic control unit.

Typical uses include LIN door modules, seat and lighting controllers, climate-control subnodes, body control interfaces, and compact automotive sensor nodes. The device can reduce board area by combining the LIN transceiver and regulator while retaining standardized LIN bus behavior. Its 8-pin SOIC package also simplifies assembly and inspection compared with larger automotive interface packages.

The main design consideration is to allocate the integrated regulator's 70 mA capability carefully and to maintain the bus, ground, and supply connections required by the manufacturer's application guidance. Decoupling, protection, PCB return paths, and LIN waveform verification remain essential because the transceiver operates in electrically harsh vehicle environments.

This product record combines the manufacturer's functional information with package details, compatible family variants, application guidance, and design considerations to support faster component selection and PCB planning.

드롭인 대체품: TJA1028T/3V3/20:11 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

TJA1028T/3V3/10:11

✅ 드롭인
📦 SOIC-8
The 3.3 V regulated output matches exactly at a 0% difference; the suffix-specific temperature and qualification ratings require confirmation.

📋 참조 대체품 (카탈로그에 없음)

TJA1028T/3V3/10/2Z

✅ 드롭인
📦 SOIC-8
The 3.3 V regulator output matches exactly at a 0% difference; the alternate suffix may change temperature, qualification, and packing attributes.

📋 참조 대체품 (카탈로그에 없음)

TJA1028T/3V3/20/DZ

✅ 드롭인
📦 SOIC-8
The 3.3 V regulated output and 70 mA regulator class match at a 0% difference; automotive suffix qualification must be checked.

📋 참조 대체품 (카탈로그에 없음)

TJA1028T/3V3/20/1U

✅ 드롭인
📦 SOIC-8
The 3.3 V regulated output matches exactly at a 0% difference; suffix-specific production and packing details require verification.

📋 참조 대체품 (카탈로그에 없음)

TJA1028T/3V3/20/DZ,118

✅ 드롭인 ⚠️ 사양 미검증
📦 SOIC-8
The 3.3 V regulator output matches exactly at a 0% difference; the ordering suffix may change reel and qualification characteristics.

📋 참조 대체품 (카탈로그에 없음)

TJA1028T/3V3/20:11 사양

Product Type LIN bus transceiver with integrated voltage regulator
LIN Bus Compliance LIN 2.0 and LIN 2.1
Automotive Network Compliance SAE J2602 and ISO 17987-4:2016 for 12 V systems
Integrated Regulator Output 3.3 V
Integrated Regulator Current 70 mA maximum
공급 전류 850 uA
Transceiver Performance 6 us
Bus System LIN local interconnect network
Transceiver Count 1 transceiver
패키지 8-pin SOIC
Terminal Count 8 terminals
Terminal Form Gull wing
Package Shape Rectangular
실장 유형 Surface mount
Electrostatic Discharge Robustness Strong ESD robustness
Automotive Bus Voltage 12 V class

TJA1028T/3V3/20:11 rectangular 핀 구성 가이드

TJA1028T/3V3/20:11(rectangular 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

TJA1028T/3V3/20:11의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TJA1028T/3V3/20:11.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TJA1028T/3V3/20:11 적합 용도: 6 애플리케이션s: Automotive LIN Door Module, Body Lighting Controller, Automotive Sensor Node, Climate-Control Subnode, Seat and Switch Controller, Compact LIN Actuator Interface.

🚗

Automotive LIN Door Module

The TJA1028T/3V3/20:11 fits a door-control node that connects switches, latch actuators, and local sensors to a LIN subnetwork. Its LIN 2.0/2.1 behavior and SAE J2602 and ISO 17987-4:2016 compatibility support standardized 12 V vehicle-network communication. The integrated 3.3 V regulator can provide up to 70 mA to low-power local circuitry, reducing the need for a separate regulator and saving board area in the compact module.

💡

Body Lighting Controller

A LIN-connected body lighting controller can use the TJA1028T/3V3/20:11 as both its bus interface and local 3.3 V supply source. The 850 uA supply current is useful for parked or intermittently active vehicle systems, while the integrated regulator can deliver up to 70 mA for logic and low-current drivers. Its 8-pin SOIC package supports compact PCB construction, although automotive transient protection and grounding must be designed around the LIN connection.

🧩

Automotive Sensor Node

The TJA1028T/3V3/20:11 is appropriate for a compact remote sensor node that reports measurements over LIN and needs a regulated local supply. The device combines a standardized LIN physical layer with a 3.3 V output capable of supplying up to 70 mA, allowing a sensor interface to operate without a separate 3.3 V regulator. The 6 us transceiver specification and 850 uA supply-current listing make the family suitable for low-power body-electronics nodes, subject to the exact bus timing and load limits in the datasheet.

🏭

Climate-Control Subnode

A climate-control subnode can use the TJA1028T/3V3/20:11 to communicate over LIN while powering a small amount of local control logic from its integrated regulator. The 3.3 V output and 70 mA regulator capability suit sensor conditioning, status indicators, and interface circuits without imposing the board-area cost of a discrete regulator. NXP's strong electrostatic-discharge robustness is relevant for this wired vehicle environment, although connector protection and automotive EMC validation remain essential.

🚗

Seat and Switch Controller

Seat-position switches and related comfort-system modules often use a distributed LIN topology to reduce wiring. The TJA1028T/3V3/20:11 provides the required LIN physical-layer function and a local 3.3 V rail in one 8-pin SOIC device. Its integrated regulator can deliver up to 70 mA, while the 850 uA supply current helps control standby consumption. The controller still requires the prescribed LIN bus components, a suitable return path, and protection appropriate to the vehicle harness.

🔧

Compact LIN Actuator Interface

The TJA1028T/3V3/20:11 can serve as the communication and local-supply section of a compact LIN actuator interface. Standardized LIN 2.0/2.1 support and 12 V automotive-network compliance make it appropriate for electromechanical nodes that require a host-independent bus connection. The 3.3 V regulator can support up to 70 mA of control electronics, but it should not be used to power a high-current actuator directly. High-current drive stages require separate transistor and protection design.

추천 제품 요약

TJA1028T/3V3/20/DZ Automotive suffix variant for qualification review 사용처: Automotive LIN Door Module, Body Lighting Controller, Climate-Control Subnode, Seat and Switch Controller TJA1028T/3V3/10:11 Related 3.3 V LIN transceiver variant 사용처: Automotive LIN Door Module, Automotive Sensor Node, Seat and Switch Controller TJA1028T/3V3/10/2Z Related 3.3 V SOIC-8 variant 사용처: Body Lighting Controller, Compact LIN Actuator Interface TJA1028T/3V3/20/1U Related 3.3 V SOIC-8 ordering variant 사용처: Automotive Sensor Node, Compact LIN Actuator Interface TJA1028T/3V3/20/DZ,118 Related 3.3 V ordering option 사용처: Climate-Control Subnode
What is the TJA1028T/3V3/20:11?
The TJA1028T/3V3/20:11 is an 8-pin LIN bus transceiver with an integrated 3.3 V regulator from NXP Semiconductors. According to the NXP product page and TJA1028 datasheet, it supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems, while the integrated regulator can supply up to 70 mA for local circuitry.
Where can I download the TJA1028T datasheet?
The official TJA1028T datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. It is the primary document for the LIN physical-layer behavior, integrated regulator specifications, electrical characteristics, package information, recommended application circuit, and pin descriptions. Use the package-specific ordering information to distinguish the TJA1028T/3V3/20:11 from other TJA1028 suffixes.
What are the key specifications of TJA1028T/3V3/20:11 that engineers should know?
The key specifications are a 3.3 V integrated regulator output, up to 70 mA regulator current, 850 uA supply current, 6 us transceiver performance, and an 8-pin SOIC package. NXP also identifies compliance with LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. These parameters place the device between a simple LIN transceiver and a more integrated automotive network node.
What is the operating voltage of the TJA1028T/3V3/20:11?
The TJA1028T/3V3/20:11 operates from a 12 V-class automotive LIN environment and provides a regulated 3.3 V output locally. The manufacturer specifically identifies SAE J2602 and ISO 17987-4:2016 compliance for 12 V systems. Exact minimum and maximum supply limits, along with regulator dropout and current-limit values, should be taken from the electrical-characteristics table in the NXP TJA1028 datasheet.
Does TJA1028T/3V3/20:11 have an integrated voltage regulator?
Yes, the TJA1028T/3V3/20:11 includes a low-drop voltage regulator that provides a 3.3 V output and can deliver up to 70 mA. According to the NXP TJA1028 datasheet, this integration is intended to simplify compact LIN nodes by combining the bus transceiver and local regulated supply in one 8-pin SOIC device.
Is TJA1028T/3V3/20:11 suitable for automotive body-control modules?
The TJA1028T/3V3/20:11 is suitable for compact 12 V automotive LIN nodes used in body electronics. NXP identifies LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016, and strong electrostatic-discharge robustness. Its integrated 3.3 V regulator can reduce board area, but the final design must still implement the required bus protection, grounding, and automotive EMC measures.
TJA1028T/3V3/20:11 vs TJA1028T/3V3/10:11: which should be selected?
Both are NXP 3.3 V TJA1028-family LIN transceivers, so the decision depends on the suffix-specific ordering ratings rather than the basic bus function. The TJA1028T/3V3/10:11 is listed in the NXP family data as a LIN transceiver with an integrated voltage regulator. Confirm temperature grade, package suffix, and production ordering codes against the manufacturer ordering information before treating one as a drop-in replacement for the other.
Can TJA1028T/3V3/20/DZ replace TJA1028T/3V3/20:11?
The TJA1028T/3V3/20/DZ is a closely related NXP TJA1028 3.3 V variant and may support the same 8-pin SOIC footprint, but it should not be treated as an unconditional replacement. The suffix can encode automotive temperature, quality, and packing options. Confirm the pin assignments, temperature range, qualification status, and ordering codes for the exact production variant before substituting it.
What can replace TJA1028T/3V3/20:11 on the same PCB?
The closest documented replacements are NXP TJA1028 3.3 V family variants in the same 8-pin SOIC format, including TJA1028T/3V3/10:11, TJA1028T/3V3/10/2Z, TJA1028T/3V3/20/DZ, TJA1028T/3V3/20/1U, and TJA1028T/3V3/20/DZ,118. Because suffix codes can change temperature, qualification, or packing, verify those attributes and the exact pinout in the NXP ordering information before replacement.
What is the best NXP alternative to TJA1028T/3V3/20:11?
The best NXP alternative is normally another TJA1028 3.3 V variant with the required 8-pin SOIC footprint and the same temperature and qualification class. TJA1028T/3V3/20/DZ is the closest visible automotive-oriented option in the family information, while TJA1028T/3V3/10:11 may fit non-automotive industrial temperature requirements. Validate the suffix-specific ordering code before releasing the design.
When should I choose TJA1028T/3V3/20:11 over a standalone LIN transceiver?
Choose TJA1028T/3V3/20:11 when the module needs both a LIN physical-layer interface and a local 3.3 V supply. Its integrated regulator can deliver up to 70 mA and the complete function occupies an 8-pin SOIC, which can reduce board area and component count. A standalone LIN transceiver remains appropriate when the node already has a regulated rail or the local load exceeds the regulator capability.
Is TJA1028T/3V3/20:11 suitable for a compact sensor node?
The TJA1028T/3V3/20:11 is well matched to a compact automotive sensor node that communicates over LIN and needs a local 3.3 V rail. The 850 uA supply-current listing supports low-power operation, and the integrated regulator can provide up to 70 mA. Confirm that the sensor, pull-up components, and any local load remain within the regulator and bus limits in the manufacturer datasheet.
Where can I find the TJA1028T pinout and package drawing?
The TJA1028T pinout and package drawing are in the NXP TJA1028 datasheet at https://www.nxp.com/docs/en/data-sheet/TJA1028.pdf. The device is identified in distributor technical records as an 8-terminal gull-wing SOIC. Use the datasheet pin-description table and package outline to assign PCB nets rather than inferring pin functions from the ordering code.
How much current can the TJA1028T/3V3/20:11 regulator supply?
The integrated 3.3 V regulator in the TJA1028T/3V3/20:11 can deliver up to 70 mA according to the NXP product page and datasheet. This capability is intended for local node electronics rather than high-current loads. Include regulator startup, thermal, and load-transient requirements in the design, and confirm the maximum dissipation and thermal limits for the selected SOIC package.
Where to buy TJA1028T/3V3/20:11 and what is its lead time?
Use the Request a Quote form on this page to request TJA1028T/3V3/20:11 pricing, stock confirmation, and current lead time. The commercial listing identifies the exact 3.3 V 8-pin SOIC ordering code, but current inventory and production timing can change. Provide your target quantity, packaging preference, and required delivery date so the supply request can be evaluated.

엔지니어링 참조 데이터: TJA1028T/3V3/20:11 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose TJA1028T/3V3/20:11 when a compact 12 V LIN node needs both a standardized bus transceiver and a local 3.3 V regulator. Its integrated supply can provide up to 70 mA, making it especially useful for low-power sensors, switches, and small body-control modules. Choose TJA1028T/3V3/20/DZ when the automotive suffix associated with the required qualification class is appropriate for the program. TJA1028T/3V3/10:11 or TJA1028T/3V3/10/2Z may be preferable when their suffix-specific temperature and production ratings fit the design better. Because all listed alternatives use the 8-pin SOIC family format, PCB reuse may be possible, but suffix-specific ratings, packing, qualification, and the exact pin description must be checked before substitution. Use a standalone LIN transceiver when the node already has a suitable regulated rail or requires a local load above the integrated regulator's capability.

대체품과의 비교

파라미터 이 제품 TJA1028T/3V3/10:11 TJA1028T/3V3/10/2Z TJA1028T/3V3/20/DZ TJA1028T/3V3/20/1U TJA1028T/3V3/20/DZ,118
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package SOIC-8 SOIC-8 - same package SOIC-8 - same package SOIC-8 - same package SOIC-8 - same package SOIC-8 - same package
Integrated Regulator Output 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Integrated Regulator Current 70 mA maximum 70 mA maximum for the TJA1028 3.3 V family variant 70 mA maximum for the TJA1028 3.3 V family variant 70 mA maximum for the TJA1028 3.3 V family variant 70 mA maximum for the TJA1028 3.3 V family variant 70 mA maximum for the TJA1028 3.3 V family variant
LIN Compliance LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for the TJA1028 family
Automotive Network 12 V 12 V 12 V 12 V 12 V 12 V

주요 차별점

  • Combines the LIN transceiver and a local 3.3 V regulator (vs TJA1028T/3V3/10:11)
  • Supports compact 12 V automotive LIN nodes (vs TJA1028T/3V3/20/DZ)
  • Provides local regulated power alongside bus communication (vs TJA1028T/3V3/20/1U)

설계 노트

Treat the integrated 3.3 V regulator as a 70 mA auxiliary supply, not as the source for a high-current actuator. Budget the transceiver, pull-up network, local logic, and transient currents together so the regulator does not enter limiting during startup or bus activity. Verify the exact dropout, current-limit, thermal, and load-transient limits in the NXP TJA1028 datasheet before finalizing the power budget.

Follow the NXP recommended application layout for the LIN and supply pins, including short connections, a low-impedance ground return, and correct placement of the required external capacitors. Keep the LIN route away from switching nodes and noisy power-conversion loops. Confirm the footprint and pin orientation against the 8-pin SOIC package drawing before releasing artwork, because suffix variants can use the same mechanical package with different ordering conditions.

The LIN interface is connected to a vehicle wiring harness and can be exposed to conducted and radiated disturbances. Implement the protection network and grounding arrangement recommended for the LIN bus, and test both dominant and recessive bus waveforms with representative harness loading. NXP identifies strong ESD robustness, but that device-level feature does not replace connector protection, filtering, or system-level EMC validation.

Do not substitute a 5.0 V TJA1028 variant for the 3.3 V device without revisiting the complete local power architecture. Conversely, changing between TJA1028T/3V3 suffixes can affect temperature class, qualification, and packing even when the regulator voltage remains 3.3 V. Check the manufacturer ordering information, pinout, absolute-maximum ratings, and qualification markings for every engineering change.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer identifies LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for this ordering suffix require confirmation from NXP.

데이터 검증일: 2026-11-18 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

tja1028t datasheet TJA1028T/3V3/20:11 datasheet TJA1028T/3V3/20:11 pinout TJA1028T/3V3/20:11 datasheet pdf TJA1028T/3V3/20:11 equivalent TJA1028T/3V3/20:11 replacement TJA1028T/3V3/20:11 cross reference TJA1028T/3V3/20:11 vs TJA1028T/3V3/10:11 NXP TJA1028T/3V3/20:11 TJA1028T/3V3/20:11 price TJA1028T/3V3/20:11 stock TJA1028T SOIC-8 LIN transceiver TJA1028T 3.3V 70mA regulator TJA1028T automotive LIN application

관련 부품 & 용어

NXP Semiconductors TJA1028T/3V3/20:11 TJA1028T/3V3/10:11 TJA1028T/3V3/10/2Z TJA1028T/3V3/20/DZ TJA1028T/3V3/20/1U TJA1028T/3V3/20/DZ,118 LIN transceiver Local Interconnect Network automotive interface IC integrated voltage regulator low-dropout regulator semiconductor LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 3.3 V regulator output 70 mA regulator output 850 uA supply current 6 us transceiver performance SOIC-8 SOIC package family surface mount automotive body electronics electrostatic-discharge robustness
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기