NXP Semiconductors

TJA1028T/5V0/20:11 - 20 kbaud LIN Transceiver | NXP

MPN: TJA1028T/5V0/20:11 ✓ सक्रिय
5 V Vdss 70 mA Id SO-8 Package 20 kbaud Speed
न्यूनतम ऑर्डर मात्रा: 1 |

TJA1028T/5V0/20:11 अवलोकन

The NXP Semiconductors TJA1028T/5V0/20:11 is a LIN 2.0/2.1 transceiver with an integrated 5.0 V low-drop voltage regulator, 20 kbaud bus operation, and an SO-8 surface-mount package. The integrated regulator can supply up to 70 mA, reducing the component count required for compact LIN nodes while retaining a regulated 5.0 V rail for local circuitry.

A LIN transceiver is an interface IC that connects a microcontroller or other host controller to a low-cost, single-wire Local Interconnect Network bus. Within the product hierarchy, the TJA1028 belongs to the LIN transceiver family, which falls under communication transceivers, interface ICs, and integrated semiconductor devices. LIN buses commonly connect vehicle body modules, sensors, switches, actuators, and door or lighting controls over a slow, robust serial network.

The device supports LIN 2.0, LIN 2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. Its 5.0 V regulator variant has a 4.9 V to 5.1 V output range, while the 20 kbaud ordering code identifies the bus-speed configuration. The SO-8 package supports surface-mount assembly, and the 6 microsecond propagation-delay value allows reliable signal timing in typical automotive body-electronics networks.

The integrated regulator is a low-drop design intended to operate from the vehicle battery while providing a local 5.0 V supply. This architecture helps create compact LIN nodes without a separate discrete regulator. Because the regulator can deliver only 70 mA, the load must remain within that limit, and supply pins still require appropriate local filtering and protection for automotive transients.

Typical uses include LIN door modules, seat and window controls, climate-control panels, body-control sensor interfaces, switch modules, and compact industrial LIN nodes. The 70 mA regulator output can support low-power sensors and control electronics, although it should not be used to power high-current actuators, lamps, or motors.

When laying out the circuit, keep the LIN-bus connection physically separated from sensitive analog or high-speed digital traces, follow the application circuit shown in the NXP datasheet, and validate the external component values for the intended network. Check the regulator load current and supply decoupling before adding additional local loads.

This page brings together the manufacturer specifications, verified distributor availability information, practical design notes, and drop-in replacement analysis. It also explains the functional differences between documented TJA1028 variants so engineers can select the correct ordering code without relying on incomplete distributor summaries.

के लिए ड्रॉप-इन विकल्प TJA1028T/5V0/20:11 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

TJA1028DT

✅ ड्रॉप-इन
📦 SO-8
Functionally identical 5.0 V LIN transceiver with a slightly modified die and package bill of materials; uses the newer preferred SOI3+ process

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TJA1028T/5V0/20

✅ ड्रॉप-इन
📦 SO-8
Base 5.0 V, 20 kbaud ordering code; functionally identical to TJA1028DT, with order-code and process-generation differences

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TJA1028T/5V0/20:11 विशेषताएं

Product Type LIN transceiver with integrated voltage regulator
LIN Compliance LIN 2.0, LIN 2.1, SAE J2602
Automotive Standard ISO 17987-4:2016 (12 V)
Bus Speed 20 kbaud
Integrated Regulator Output 5.0 V
Regulator Output Range 4.9 V to 5.1 V
Regulator Maximum Output Current 70 mA
ऑपरेटिंग सप्लाई वोल्टेज 5 V
Propagation Delay Time 6 us
पैकेज SO-8
Package Type 8-pin SOIC
माउंटिंग स्टाइल SMD/SMT
Packaging Reel
Transceiver Configuration 1/1 half-duplex LIN transceiver
ESD Protection Strong electrostatic discharge protection
RoHS स्थिति Compliant

TJA1028T/5V0/20:11 8-pin soic पिन कॉन्फ़िगरेशन गाइड

TJA1028T/5V0/20:11 (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

TJA1028T/5V0/20:11 के लिए 8-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TJA1028T/5V0/20:11.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

TJA1028T/5V0/20:11 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive LIN Door Module, Body Sensor Interface Node, Climate-Control Panel Interface, Automotive Switch and Illumination Module, Compact Industrial LIN Controller, Seat and Window Control Interface.

🚗

Automotive LIN Door Module

The TJA1028T/5V0/20:11 fits a door control module that accepts LIN commands from a body controller and drives local switches or indicator logic. Its 20 kbaud LIN interface supports LIN 2.0 and LIN 2.1, while the integrated 5.0 V regulator supplies up to 70 mA to the host controller and related low-power circuitry. This integration reduces the number of discrete power components in a compact SO-8 node. Design the regulator load conservatively because motor, lamp, and lock actuators require separate drive stages rather than the 70 mA regulator output.

🧩

Body Sensor Interface Node

The TJA1028T/5V0/20:11 is suitable for a remote LIN sensor node that combines a 12 V automotive bus connection with a regulated 5.0 V local rail. Its 70 mA regulator capability can power a low-power sensing front end and host electronics without a separate regulator, provided the aggregate current remains within that limit. The device's SAE J2602 and ISO 17987-4:2016 support, together with strong ESD protection, helps simplify qualification for body-mounted modules. Add input filtering and transient protection according to the application guidance for the vehicle platform.

🏭

Climate-Control Panel Interface

The TJA1028T/5V0/20:11 can serve as the LIN interface for a climate-control panel or HVAC switch module. The 20 kbaud bus rate matches the low-speed communication used by many distributed body systems, and the 5.0 V regulator output provides a convenient local supply for a microcontroller, button decoder, or indicator driver. The integrated architecture reduces board area in space-constrained panels. Because the 70 mA limit applies across the regulator output, illuminate indicators through an appropriate driver rather than loading the transceiver's regulator directly.

💡

Automotive Switch and Illumination Module

The TJA1028T/5V0/20:11 is a practical choice for a distributed LIN switch module that reads local inputs and reports their state to a body controller. Its LIN 2.1 compatibility supports modern low-speed networks, while the integrated regulator supplies low-power logic from one SO-8 package. The 6 us propagation-delay specification supports deterministic communication in standard LIN timing arrangements. Use a separate transistor or LED driver for illumination because the transceiver regulator cannot support lamp or actuator current directly.

🔧

Compact Industrial LIN Controller

The TJA1028T/5V0/20:11 can also support compact industrial LIN nodes where a controller, sensor, or remote actuator shares a single-wire bus. The integrated 5.0 V, 70 mA regulator simplifies the local power architecture, while 20 kbaud operation provides adequate throughput for status, configuration, and slow command traffic. Industrial users should add protection suited to the wiring length and environment, since the automotive-compliant LIN interface does not by itself specify every possible industrial surge condition. Keep bus traces short and follow the NXP application-circuit layout.

🚙

Seat and Window Control Interface

The TJA1028T/5V0/20:11 fits distributed seat, window, and mirror-control nodes that communicate over LIN while controlling external power stages. Its integrated regulator provides 5.0 V for controller logic, while the LIN interface handles communication with the vehicle's master node. This division of responsibilities allows a compact SO-8 implementation and avoids powering motors from the 70 mA regulator. Include the recommended bus termination and supply-decoupling network, and verify transient performance for the exact electrical environment of the actuator module.

अनुशंसित उत्पादों का सारांश

TJA1028DT Preferred-process functionally identical alternative उपयोग में: Automotive LIN Door Module, Body Sensor Interface Node, Climate-Control Panel Interface, Automotive Switch and Illumination Module, Compact Industrial LIN Controller, Seat and Window Control Interface TJA1028T/5V0/20 Closely related 5.0 V, 20 kbaud ordering code उपयोग में: Automotive LIN Door Module, Climate-Control Panel Interface, Compact Industrial LIN Controller
What is the TJA1028T/5V0/20:11 used for?
The TJA1028T/5V0/20:11 is a 20 kbaud LIN 2.0/2.1 transceiver with an integrated 5.0 V, 70 mA voltage regulator. It connects a host controller to a vehicle LIN bus and can supply local low-power circuitry from one SO-8 device. According to the NXP TJA1028 datasheet, the device complies with SAE J2602 and ISO 17987-4:2016 for 12 V systems.
What is the output voltage of the TJA1028T/5V0/20:11 regulator?
The integrated regulator in the TJA1028T/5V0/20:11 produces 5.0 V with a documented range of 4.9 V to 5.1 V. Its maximum output current is 70 mA, so the connected local load must remain below that limit. The NXP datasheet identifies this as the 5.0 V variant of the TJA1028 family.
Is the TJA1028T/5V0/20:11 compatible with LIN 2.1?
Yes, the TJA1028T/5V0/20:11 supports LIN 2.0 and LIN 2.1 operation at 20 kbaud. The NXP datasheet also identifies SAE J2602 and ISO 17987-4:2016 compliance for 12 V applications. These qualifications make the device suitable for low-speed vehicle body networks using LIN.
Where can I download the TJA1028T datasheet PDF?
The official TJA1028T datasheet PDF is available from the NXP document link on this page. It contains the detailed pin description, application circuit, electrical characteristics, LIN timing information, regulator limits, and recommended external components. Use the NXP document as the controlling reference when assigning pins or calculating network timing.
Where can I find the TJA1028T pinout?
The TJA1028T pin assignments are shown in the pin-description table and package drawing in the NXP TJA1028 datasheet. The device uses an 8-pin SO package, but the package drawing should be used directly when assigning PCB nets because exposed-pad or thermal details must never be inferred from the package outline alone.
Can TJA1028DT replace TJA1028T/5V0/20:11?
The TJA1028DT is documented as functionally identical to the TJA1028T/5V0/20 and shares the same datasheet, making it a functional drop-in candidate in the same SO-8 family. NXP describes the TJA1028DT as using the newer preferred SOI3+ process with a slightly modified die and package bill of materials. Confirm the exact order-code details in the NXP documentation before production substitution.
What is the best drop-in replacement for TJA1028T/5V0/20:11?
The TJA1028DT is the closest documented NXP drop-in candidate because it is described as functionally identical to the TJA1028T/5V0/20 and uses the same datasheet. The TJA1028T/5V0/20 is also a close ordering-code variant of the target. Verify bus speed, regulator output, temperature grade, and the exact 20 kbaud ordering suffix before replacing the fitted device.
What is the difference between TJA1028T/5V0/20 and TJA1028DT?
The principal documented difference is implementation and lifecycle positioning: NXP describes the TJA1028DT as being based on the newer preferred SOI3+ process with a slightly modified die and package bill of materials, while the TJA1028T/5V0/20 is functionally identical and is not recommended for new designs. Both share the same TJA1028 datasheet, so pin-level and functional compatibility is maintained.
When should I choose TJA1028T/5V0/20:11 over TJA1028DT?
Choose TJA1028T/5V0/20:11 when an existing design is standardized on that 5.0 V, 20 kbaud ordering code and the required part is already qualified for the application. Choose TJA1028DT for new designs because NXP identifies the SOI3+ implementation as preferred. Both provide the same documented 5.0 V regulator and 70 mA output capability.
Is TJA1028T/5V0/20:11 suitable for an automotive sensor node?
The TJA1028T/5V0/20:11 is suitable for compact 12 V automotive LIN nodes because it supports LIN 2.1, SAE J2602, and ISO 17987-4:2016 and includes strong ESD protection. Its 70 mA regulated output can power suitable low-power sensing electronics, but the total regulator load must be checked before adding multiple sensors.
How much current can the TJA1028T/5V0/20:11 regulator provide?
The integrated voltage regulator can deliver up to 70 mA. This rating applies to the complete local load, not to each attached device. According to the NXP datasheet, the regulator output is 5.0 V within a 4.9 V to 5.1 V range. Higher-current loads require a separate regulator and should not be connected to this output.
What are the key specifications of TJA1028T/5V0/20:11 that engineers should know?
The key specifications are 20 kbaud LIN operation, a 5.0 V integrated regulator rated to 70 mA, an SO-8 package, and compliance with LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. The NXP datasheet also lists a 6 us propagation delay and 4.9 V to 5.1 V regulated output range.
Can I use TJA1028T/5V0/20:11 in an industrial LIN system?
The TJA1028T/5V0/20:11 can be used in industrial LIN systems when the electrical environment satisfies the device's specified supply and transient requirements. Its LIN 2.0/2.1 compatibility and integrated 5.0 V regulator suit compact remote nodes. Industrial implementations should also include suitable input protection against wiring transients and surges.
What can replace TJA1028T/5V0/20:11?
The TJA1028DT is the most directly documented replacement because NXP describes it as functionally identical to the TJA1028T/5V0/20 and sharing the same datasheet. The TJA1028T/5V0/20 base ordering code is another close NXP alternative. Both should be checked for the required 5.0 V regulator, 20 kbaud bus speed, package, and temperature grade before substitution.
Where can I buy TJA1028T/5V0/20:11 online?
Use the Request a Quote form on this page to request current stock, lead time, and a quotation for TJA1028T/5V0/20:11. The form allows the exact MPN, quantity, and reel packaging requirement to be checked against current supply. Verify the returned quotation against your production schedule before releasing a purchase order.

के लिए इंजीनियरिंग संदर्भ डेटा TJA1028T/5V0/20:11 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose TJA1028T/5V0/20:11 for an existing 20 kbaud LIN design standardized on the original TJA1028 ordering code, particularly when supply continuity and exact configuration matching are the priorities. Choose TJA1028DT for a new design because NXP identifies its SOI3+ implementation as preferred; it is documented as functionally identical and uses the same datasheet. Both provide a 5.0 V integrated regulator rated to 70 mA and an SO-8 footprint. Neither choice should be made without confirming the complete order code, bus speed, temperature grade, and package details. The choice between them is primarily lifecycle and implementation strategy rather than a functional capability difference, so both require the same careful attention to supply decoupling, transient protection, and the separation of the 70 mA regulator load from motors, lamps, and actuators.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद TJA1028DT TJA1028T/5V0/20
Package SO-8 SO-8 SO-8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
LIN Bus Speed 20 kbaud 20 kbaud 20 kbaud
Integrated Regulator Output 5.0 V 5.0 V 5.0 V
Regulator Output Range 4.9 V to 5.1 V 4.9 V to 5.1 V 4.9 V to 5.1 V
Regulator Maximum Output Current 70 mA 70 mA 70 mA
Propagation Delay Time 6 us 6 us 6 us
Compliance LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016 LIN 2.0/2.1, SAE J2602, ISO 17987-4:2016
Process and Design Status Original TJA1028 generation Preferred SOI3+ process with modified die and package bill of materials Functionally identical generation not recommended for new designs

मुख्य विशेषताएँ

  • Combines a 20 kbaud LIN interface and regulated local supply in one package (बनामTJA1028T/5V0/20)
  • Uses NXP's preferred SOI3+ implementation (बनामTJA1028T/5V0/20:11)
  • Combines bus communication with local power conversion (बनामDiscrete LIN transceiver and regulator implementations)

डिज़ाइन नोट्स

Treat the integrated 5.0 V regulator as a 70 mA auxiliary supply, not as a general-purpose power rail. Budget the host controller, pull-ups, sensors, and status-indicator logic together against this limit. If the node contains a relay, lamp, motor, or solenoid, use a separate driver and supply. Check the minimum operating supply and regulator dropout conditions in the NXP electrical-characteristics table before adding margin to the 5 V output.

Follow the NXP TJA1028 application circuit for supply decoupling and LIN-bus termination. Place the input and regulator capacitors close to their device pins and keep the LIN trace short and isolated from high-current switching paths. The SO-8 footprint provides limited routing space, so reserve clearances around the bus node and avoid routing motor or relay current beneath the transceiver.

Do not replace the 5.0 V ordering variant with the 3.3 V version without reassessing every load, and do not substitute a 10 kbaud variant where the 20 kbaud network timing is required. Also verify the exact TJA1028 order code, temperature range, and reel configuration before production substitution. The TJA1028DT is functionally identical but uses a modified die and package bill of materials, so review the NXP documentation for any assembly-specific change.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance is identified for TJA1028T. The device supports LIN 2.0/2.1, SAE J2602, and ISO 17987-4:2016 for 12 V systems. AEC-Q100, REACH, lead-free, halogen-free, and conflict-minerals status are not confirmed by the product information available for this order code.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

tja1028t datasheet TJA1028T/5V0/20:11 datasheet TJA1028T pinout TJA1028T SO-8 pinout TJA1028T/5V0/20:11 equivalent TJA1028T/5V0/20:11 replacement TJA1028T vs TJA1028DT NXP TJA1028T LIN transceiver TJA1028T 5V 70mA regulator TJA1028T 20 kbaud LIN 2.1 TJA1028T automotive sensor node TJA1028T/5V0/20:11 price TJA1028T/5V0/20:11 stock what is the TJA1028T regulator output

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors TJA1028T/5V0/20:11 TJA1028DT TJA1028T/5V0/20 LIN transceiver Local Interconnect Network LIN bus LIN 2.0 LIN 2.1 SAE J2602 ISO 17987-4:2016 integrated low-drop voltage regulator 5.0 V regulator 70 mA output current 20 kbaud bus speed SO-8 package surface-mount package automotive body electronics transient protection ESD protection RoHS host controller bus termination power supply rejection
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें