Texas Instruments

TLV2442ID - Dual Rail-to-Rail Output Op Amp | Texas Instruments

MPN: TLV2442ID ✓ सक्रिय
Wide-input-voltage Vdss 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

TLV2442ID अवलोकन

Texas Instruments TLV2442ID is a dual Advanced LinCMOS operational amplifier with rail-to-rail output capability and wide-input-voltage operation. The device contains two amplifier circuits, operates from 2.7 V to 10 V, and is available in an 8-pin SOIC package. Its 1.75 MHz gain-bandwidth product and 1.3 V/µs slew rate make it suitable for low-power signal-conditioning designs that require more bandwidth than a basic micropower amplifier.

An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, or compare small analog signals. The TLV2442 belongs to the CMOS operational-amplifier hierarchy within the broader amplifier IC and semiconductor categories. Unlike a rail-to-rail input device, the TLV2442 is specifically described by Texas Instruments as having a rail-to-rail output and wide-input-voltage range. This distinction matters when the output must approach the supply rails but the input does not need to cover both rails fully.

Key characteristics include two amplifier circuits in one package, a 2.7 V to 10 V supply range, 1.75 MHz bandwidth, and a 1.3 V/µs slew rate. The rail-to-rail output is particularly useful for driving downstream circuits that operate near a supply rail. Combining two amplifiers in one SOIC-8 package can also reduce board area and simplify dual-channel signal paths such as sensor conditioning, filtering, or differential analog front ends.

The Advanced LinCMOS implementation supports low-voltage operation while preserving useful dynamic performance for portable and embedded equipment. Bandwidth determines how quickly the closed-loop amplifier can process small-signal variations, while slew rate describes the maximum rate at which the output can change in a large-signal step. These characteristics make the TLV2442 appropriate for audio, instrumentation, communication, and control applications where the signal bandwidth remains below the amplifier’s 1.75 MHz capability.

Typical uses include low-frequency sensor amplification, active filtering, audio signal conditioning, general-purpose buffering, and dual-channel analog processing. Battery-operated products benefit from the 2.7 V minimum supply voltage because the amplifier can operate directly from a single 3.3 V rail. The same SOIC-8 package is convenient for prototypes and production assemblies requiring a conventional surface-mount footprint.

Designers should verify the input common-mode range, output swing, noise, offset, stability, and output-current capability against the manufacturer datasheet for the intended supply and load conditions. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs must be configured according to the recommended circuit practice. Proper grounding and short feedback paths are essential for predictable settling and reduced channel interaction.

This page combines the manufacturer’s device description with package, electrical, sourcing, replacement, and application guidance. It also identifies the limits of the available cross-reference information so that engineers can distinguish a verified drop-in option from variants that require a different footprint or a new design qualification.

के लिए ड्रॉप-इन विकल्प TLV2442ID — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TLV2442ID (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Gain-Bandwidth Product, Output Swing, Package.

Texas Instruments
Amplifier Type: Dual operational amplifier
Gain-Bandwidth Product: 1.81 MHz
Output Swing: Rail-to-rail
इसके साथ तुलना करें TLV2442ID →

TLV2442AID

✅ ड्रॉप-इन
📦 8-pin SOIC
Extended common-mode input range in the TLV244xA family; supply, bandwidth, slew rate, and electrical values are for direct comparison

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TLV2442ID Maximum Ratings और Electrical Characteristics

Amplifier Type Operational Amplifier
Number of Amplifier Circuits 2 circuits
Technology Advanced LinCMOS
Output Swing Rail-to-rail output
Input Voltage Capability Wide-input-voltage
Supply Voltage Range 2.7 V to 10 V
Gain-Bandwidth Product 1.75 MHz
Slew Rate 1.3 V/µs
पैकेज 8-pin SOIC
Package Pin Count 8 pins
माउंटिंग प्रकार Surface mount
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

TLV2442ID 8 pins पिन कॉन्फ़िगरेशन गाइड

TLV2442ID (8 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

TLV2442ID के लिए 8 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TLV2442ID.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

TLV2442ID के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Sensor Signal Conditioning, Active Audio Filtering, Industrial Instrumentation Buffering, Communication Interface Conditioning, Battery-Powered Data Acquisition, Precision Control Signal Amplifier.

🧩

Portable Sensor Signal Conditioning

The TLV2442ID fits low-power sensor-conditioning paths because its 2.7 V to 10 V supply range permits operation from a 3.3 V system rail. Two amplifier circuits can process two related sensor channels in one 8-pin SOIC package. The 1.75 MHz gain-bandwidth product provides more closed-loop bandwidth than a basic micropower amplifier, while the 1.3 V/µs slew rate supports moderate-amplitude signal changes. The rail-to-rail output helps preserve signal swing near the positive or negative rail. Check the allowed input common-mode range, output loading, offset, and noise before selecting the gain, because those characteristics determine whether the sensor can operate across its full measurement span.

🎧

Active Audio Filtering

The TLV2442ID can implement active filters for audio and low-frequency communication signals when its 1.75 MHz gain-bandwidth product and 1.3 V/µs slew rate exceed the filter requirements. The dual configuration is useful for cascaded filter stages, balanced input conditioning, or two independent channels in a single 8-pin SOIC. Rail-to-rail output increases usable signal range in single-supply systems, while the 2.7 V minimum supply supports 3.3 V portable equipment. Set the closed-loop bandwidth from the actual noise gain rather than using the 1.75 MHz gain-bandwidth figure directly, and verify output swing into the next stage’s load.

🏭

Industrial Instrumentation Buffering

The TLV2442ID is applicable to instrumentation buffers that interface low-level analog signals to a following measurement or control stage. Its 1.75 MHz gain-bandwidth product and 1.3 V/µs slew rate provide useful response for many industrial control signals, while the dual package simplifies two-channel buffering. The 2.7 V to 10 V operating range supports both 3.3 V and 5 V industrial electronic systems. Engineers should verify input offset, bias current, noise, common-mode range, and capacitive-load stability for the sensing node. The rail-to-rail output simplifies downstream drive, but it does not make the input stage fully rail-to-rail.

🌐

Communication Interface Conditioning

The TLV2442ID can serve as a general-purpose gain and buffer stage in low-speed communication equipment. Its 1.75 MHz gain-bandwidth product is suitable for signals well below that frequency, and the 1.3 V/µs slew rate helps the output follow larger transitions. Two independent amplifiers in one 8-pin SOIC can condition transmit and receive channels or support differential buffering. A 3.3 V operating rail falls inside the stated 2.7 V to 10 V range. The designer should still account for input offset, noise, output swing, and stability when driving capacitive cable or ADC inputs, particularly if the signal has a high DC component.

📱

Battery-Powered Data Acquisition

The TLV2442ID is a reasonable choice for low-voltage data-acquisition blocks that need two amplifiers without requiring a high-speed op amp. The 2.7 V minimum supply voltage supports 3.3 V battery-regulated systems, and the 1.75 MHz gain-bandwidth product is ample for many temperature, position, pressure, and slow analog sensor channels. Its rail-to-rail output helps retain signal range when the supply is limited. Because this is a general-purpose CMOS amplifier rather than a dedicated low-noise precision device, compare offset, drift, noise, and input bias current with the sensor error budget. Verify that each selected gain remains stable with the intended source and load impedances.

⚡

Precision Control Signal Amplifier

The TLV2442ID can amplify control and feedback signals in embedded systems where a 1.75 MHz bandwidth and 1.3 V/µs slew rate provide adequate response without a high-speed amplifier. The dual circuit arrangement allows one amplifier for error amplification and another for feedback or signal conditioning. Operating from a 3.3 V rail is possible because the specified range begins at 2.7 V, and rail-to-rail output improves drive toward the active device’s supply rail. Validate offset and drift against the control-loop accuracy requirement, then check common-mode range and output swing at the actual operating voltage. Feedback-component tolerances and board grounding also influence achievable loop gain and stability.

What is the operating voltage of TLV2442ID?
The TLV2442ID operates from 2.7 V to 10 V. According to the Texas Instruments TLV2442 product information, this supply range allows the dual operational amplifier to operate from a single 3.3 V rail or higher supply configurations. The device is packaged in an 8-pin SOIC and contains two rail-to-rail-output amplifier circuits. Confirm the complete input common-mode and output-swing limits in the manufacturer datasheet before operating near either supply rail.
What are the key specifications of TLV2442ID that engineers should know?
The TLV2442ID is a dual Advanced LinCMOS operational amplifier with a 2.7 V to 10 V supply range, 1.75 MHz gain-bandwidth product, 1.3 V/µs slew rate, and rail-to-rail output capability. Texas Instruments describes the family as a wide-input-voltage dual operational amplifier. The device uses an 8-pin SOIC package. Its 1.75 MHz bandwidth and 1.3 V/µs slew rate distinguish it from lower-bandwidth micropower amplifiers used in battery-powered sensing.
What can replace TLV2442ID?
The TLV2442AID is the closest verified drop-in option identified for the TLV2442ID because it belongs to the same TLV244xA dual operational-amplifier family and uses the same 8-pin SOIC footprint. The TLV2442IDR is the tape-and-reel ordering form of the target rather than a distinct drop-in alternative. No verified cross-brand, pin-compatible replacement was identified in the available cross-reference results, so board changes or a fresh qualification would be necessary for any unverified substitute.
Is TLV2442ID suitable for 3.3 V applications?
Yes, the TLV2442ID supports a 2.7 V to 10 V supply range and is therefore suitable for circuits powered by 3.3 V. The manufacturer identifies the device as a dual Advanced LinCMOS amplifier with rail-to-rail output and wide-input-voltage operation. Its 1.75 MHz gain-bandwidth product and 1.3 V/µs slew rate are adequate for many low-frequency instrumentation, filtering, buffering, and audio signal-conditioning tasks. Output swing and input common-mode limits must still be checked at the selected 3.3 V supply.
TLV2442ID vs TLV2442AID - which is better?
The TLV2442AID is the more directly reusable option when replacing an existing TLV2442ID because both are 8-pin SOIC devices in the TLV2442 family. The TLV2442ID is the original TLV2442 device, while the TLV2442AID belongs to the TLV244xA family with an extended common-mode input range relative to typical standard CMOS amplifiers. The exact electrical differences should be reviewed in the manufacturer documentation before production substitution.
When should I choose TLV2442ID over a lower-bandwidth amplifier?
Choose the TLV2442ID when the signal path needs more than the bandwidth and slew rate of a basic low-power amplifier. Its 1.75 MHz gain-bandwidth product and 1.3 V/µs slew rate provide more dynamic range for active filters, sensor conditioning, audio paths, and moderate-frequency buffering. A lower-bandwidth device may be preferable only when energy efficiency dominates and the required signal bandwidth is much lower. Both amplifier choices should be assessed against the actual supply, load, noise, and stability requirements.
Is TLV2442ID the same as TLV2442IDR?
The TLV2442ID and TLV2442IDR refer to the same Texas Instruments TLV2442 dual operational-amplifier device in different orderable packaging forms. The TLV2442ID is the tube-packed ordering option, while the TLV2442IDR is the tape-and-reel form used for automated assembly. Both use the 8-pin SOIC package and have the same core device function. The suffix is therefore not a technical performance upgrade and should not be presented as a separate alternative amplifier.
Where can I download the TLV2442ID datasheet PDF?
The official TLV2442ID documentation is available through the Texas Instruments TLV2442 product page at https://www.ti.com/product/TLV2442. That page provides manufacturer product information, ordering details, quality information, and links to the device documentation. Use the manufacturer’s pin-description and electrical-characteristics tables when assigning PCB connections or checking the input common-mode range, output swing, offset, noise, and stability behavior.
Where can I find the TLV2442ID pinout?
Use the pin-description table in the Texas Instruments TLV2442 documentation to identify both amplifier channels and the power pins in the 8-pin SOIC package. The verified product information confirms an 8-pin SOIC package, but it does not reproduce the numbered pin assignments. The manufacturer’s package drawing is therefore the controlling reference for PCB layout and should be checked before routing power, feedback networks, and dual-channel signals.
What is the best drop-in replacement for TLV2442ID?
The TLV2442AID is the best verified same-footprint option identified for the TLV2442ID, with an 8-pin SOIC package matching the target. It is sourced from the same manufacturer and comes from the closely related TLV244xA family. The available comparison information indicates an extended common-mode input range for the A-family devices. No verified cross-brand equivalent with a confirmed 8-pin SOIC pinout and comparable electrical performance appeared in the cross-reference results.
Can TLV2442ID drive signals near the supply rail?
The TLV2442ID has a rail-to-rail output, so its output can operate close to the positive and negative supply limits under suitable load and frequency conditions. Its input stage is described as wide-input-voltage rather than fully rail-to-rail input. The output capability and input range are therefore different characteristics: an input signal must remain within the permitted common-mode range even though the output can swing near the rails. Check the manufacturer’s output-swing graphs for the selected supply voltage and load.
How much bandwidth does TLV2442ID have?
The TLV2442ID has a 1.75 MHz gain-bandwidth product and a 1.3 V/µs slew rate, according to the Texas Instruments product description and the TLV2442ID specification listing. The gain-bandwidth product limits closed-loop bandwidth according to noise gain, so a 10 kHz closed-loop amplifier does not provide the full 1.75 MHz of usable bandwidth. Slew-rate limitations become more important for large output steps and should be checked against the required signal amplitude and frequency.
Where to buy TLV2442ID online?
Use the “Request a Quote” form on this page to request TLV2442ID availability, quantity pricing, and lead time for the exact 8-pin SOIC ordering code. The form avoids ambiguity between the tube-packed TLV2442ID and the tape-and-reel TLV2442IDR variant. Include your required quantity, target delivery date, and approved-supplier requirements when requesting the quotation. Stock status should be confirmed for the current production and assembly schedule.
What is the price of TLV2442ID?
The current unit price for TLV2442ID depends on quantity, packaging, and current component availability, so use the “Request a Quote” form on this page for a current quotation. Specify the exact TLV2442ID ordering code and required quantity when submitting the request. This avoids confusion with the TLV2442IDR tape-and-reel version, which can have different order quantities and assembly-logistics requirements even though it uses the same core device.
Is TLV2442ID in stock and what is its lead time?
Current stock and lead time for TLV2442ID should be confirmed through the “Request a Quote” form on this page. Include the required quantity, shipment destination, and target production date to obtain a useful scheduling response. Distributor inventory can fluctuate, and the requested tube or tape-and-reel packaging must match the assembler’s requirements. Do not infer availability from a different TLV2442 package suffix when planning a production build.
What is the best Texas Instruments equivalent for TLV2442ID?
The TLV2442AID is the identified Texas Instruments equivalent for the TLV2442ID because both are dual operational amplifiers in an 8-pin SOIC package. The A-family device offers the advantage of an extended common-mode input range, while both retain the family’s low-voltage operational-amplifier role. No additional distinct same-package Texas Instruments device was confirmed by the available cross-reference information. Validate the A-family electrical limits and stability requirements in the manufacturer documentation before substitution.

के लिए इंजीनियरिंग संदर्भ डेटा TLV2442ID — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the TLV2442ID for low-voltage, dual-channel analog designs that require a conventional 8-pin SOIC, a 2.7 V to 10 V supply range, rail-to-rail output, and moderate dynamic performance. It is well suited to 3.3 V sensor conditioning, active filtering, audio paths, and general-purpose buffering where the 1.75 MHz bandwidth and 1.3 V/µs slew rate provide adequate margin. Choose the TLV2442AID when its extended common-mode input range is needed and the manufacturer documentation confirms that every other design target remains acceptable. Treat TLV2442IDR as a packaging choice rather than a different amplifier. No cross-brand drop-in replacement was confirmed with both an identical SOIC pinout and sufficiently similar electrical characteristics, so a competing device should not be treated as a drop-in option without complete pinout and performance verification.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद TLV2442AID
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC
Amplifier Circuits 2 circuits 2 circuits
Input Capability Wide-input-voltage Extended common-mode input range

मुख्य विशेषताएँ

  • Two amplifier circuits in a compact 8-pin SOIC (बनामTLV2442AID)
  • Rail-to-rail output operation (बनामTLV2442AID)
  • Useful bandwidth and slew rate for low-voltage systems (बनामTLV2442AID)

डिज़ाइन नोट्स

Route each SOIC power pin to a nearby low-impedance supply node and place the required bypass capacitors close to the device. Keep feedback resistors and compensation components adjacent to their corresponding amplifier pins to minimize parasitic capacitance and feedback-loop area. Because the TLV2442ID has two amplifier circuits in one package, treat the channels independently for layout and stability even though they share a package and supply pins.

Do not treat the rail-to-rail output specification as a guarantee that every input signal is accepted. The TLV2442ID has a wide-input-voltage input range, while its output can approach the supply rails. Before selecting the gain, verify that the input common-mode voltage remains inside the permitted range and that the output swing supports the load. This separation of input and output ranges is essential in single-supply sensor circuits whose signal can approach either rail.

The 1.75 MHz figure is a gain-bandwidth product, not a guaranteed closed-loop bandwidth at every gain setting. For a noninverting amplifier, bandwidth is approximately the gain-bandwidth product divided by noise gain; inverting configurations require the same noise-gain analysis. Also confirm that the 1.3 V/µs slew rate is adequate for the largest output step and signal frequency. Ignoring either limit can produce unexpected distortion or slow settling.

Use a supply within the specified 2.7 V to 10 V range and include local decoupling. A 3.3 V rail is a supported operating point, but output swing, input common-mode range, and output-current capability must be evaluated at 3.3 V rather than inferred from nominal supply voltage. For portable equipment, compare the complete analog-channel power budget and thermal environment against a micropower amplifier when the signal bandwidth is substantially lower than 1.75 MHz.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product information identifies the TLV2442 as an Advanced LinCMOS dual operational amplifier but does not provide specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

TLV2442ID datasheet TLV2442ID pinout TLV2442ID datasheet pdf TLV2442ID equivalent TLV2442ID replacement TLV2442ID cross reference TLV2442ID vs TLV2442AID TLV2442ID SOIC-8 pinout TLV2442ID price TLV2442ID stock Texas Instruments TLV2442ID TLV2442ID 3.3V amplifier TLV2442ID application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments TLV2442 TLV2442ID TLV2442AID TLV2442IDR operational amplifier dual operational amplifier voltage-feedback amplifier amplifier IC Advanced LinCMOS CMOS semiconductor rail-to-rail output wide-input-voltage gain-bandwidth product slew rate SOIC-8 surface mount SMD 2.7 V to 10 V supply signal conditioning active filter audio industrial instrumentation sensor conditioning
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें