STMicroelectronics

TS374IDT - Low-Power Quad CMOS Comparator | STMicroelectronics

MPN: TS374IDT ✓ सक्रिय
3 V to 16 V Vdss 0.1 mA typical Id 14-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

TS374IDT अवलोकन

The STMicroelectronics TS374IDT is a low-power quad CMOS voltage comparator with four independent comparison channels, an open-drain output, and operation from a single 3 V to 16 V supply or from dual supplies of ±1.5 V to ±8 V. The device is packaged in a 14-pin SOIC and is intended for low-power voltage-sensing, threshold-detection, and signal-conditioning systems.

A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when their relationship crosses a defined threshold. The TS374 belongs to the comparator hierarchy within analog and interface semiconductors. Its four-channel architecture allows one package to monitor four independent signals, reducing board area when several sensing or control functions are required.

The TS374IDT features very low supply current of approximately 0.1 mA per comparator, independent of supply voltage, and extremely low input bias and input offset currents of approximately 1 pA typical. The input offset voltage is specified to a maximum of 12 mV, while the response time reaches 600 ns. Its CMOS input stage supports operation from a single supply or from positive and negative dual supplies.

Each channel uses open-drain output structure, allowing the output to be pulled up to a suitable external voltage and permitting wired connection to a shared bus when only one channel should actively assert a logic state. The open-drain architecture also provides flexibility when interfacing with CMOS, MOS, or TTL-compatible downstream circuitry. The manufacturer lists the TS374 family as a low-power quad CMOS voltage comparator supporting supply ranges from 3 V to 16 V or ±1.5 V to ±8 V.

Typical uses include battery-powered threshold detection, industrial sensor interfaces, window or level monitoring, overvoltage detection, control systems, and general-purpose signal conditioning. The low input current is especially useful with high-impedance sensors because it minimizes loading of the measured signal.

Designers should account for input common-mode limits, output pull-up requirements, input offset voltage, and the effect of supply noise on comparison accuracy. Every open-drain output needs an appropriate pull-up resistor unless it is intentionally connected to a shared wired-AND node. Decoupling close to the supply pins remains important even though the device itself consumes very little current.

This product page combines manufacturer electrical characteristics, package details, sourcing information, and application guidance. It also highlights the design trade-offs involved when using a quad open-drain comparator instead of single-channel or push-pull alternatives, helping engineers select the correct replacement without changing the PCB footprint.

के लिए ड्रॉप-इन विकल्प TS374IDT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TS374IDT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Comparator Type, Logic Compatibility, Response Time.

STMicroelectronics
Comparator Type: Quad differential voltage comparator
Logic Compatibility: TTL-compatible output
Response Time: 200 ns typical
इसके साथ तुलना करें TS374IDT →

TS374ID

✅ ड्रॉप-इन
STMicroelectronics
📦 14-pin SOIC
Quad differential voltage comparator · 4 · 3 V to 16 V · Open-drain · 200 ns typical · 10^12 ohm typical

कीमत के लिए संपर्क करें

डेटाशीट देखें →

TS374IDT Maximum Ratings और Electrical Characteristics

Number of Comparator Channels 4 channels
Comparator Type Low-power quad CMOS voltage comparator
Single Supply Operating Range 3 V to 16 V
Dual Supply Operating Range +/-1.5 V to +/-8 V
Supply Current per Comparator 0.1 mA typical
Input Bias Current 1 pA typical
Input Offset Current 1 pA typical
Maximum Input Offset Voltage 12 mV
Response Time 600 ns maximum
आउटपुट प्रकार Open-drain
Logic Compatibility CMOS, MOS, and TTL-compatible
पैकेज 14-pin SOIC
Package Pin Count 14 pins
माउंटिंग प्रकार Surface mount
RoHS Compliance Unknown
REACH Compliance Unknown

TS374IDT 14 pins पिन कॉन्फ़िगरेशन गाइड

TS374IDT (14 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

TS374IDT के लिए 14 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TS374IDT.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

TS374IDT के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Threshold Detection, Industrial Sensor Interfacing, Power-Supply Overvoltage Detection, Logic Level and Window Monitoring, Motor and Actuator Control, Portable Test and Measurement Equipment.

⚡

Battery-Powered Threshold Detection

The TS374IDT suits portable systems that must compare several sensed voltages while maintaining low standby consumption. Its four comparator channels operate from a single supply between 3 V and 16 V, and each channel draws approximately 0.1 mA according to the STMicroelectronics TS374 datasheet. A pull-up resistor is required on every open-drain output. The 12 mV maximum input offset and 600 ns maximum response time are suitable for battery thresholds, pack monitoring, and charger-state detection where nanosecond-level propagation is unnecessary.

🏭

Industrial Sensor Interfacing

The TS374IDT can condition outputs from high-impedance industrial sensors because its typical input bias current and input offset current are each 1 pA. Four channels provide flexible threshold comparisons for temperature, level, or pressure signals without requiring four separate packages. The device accepts single supplies from 3 V to 16 V or dual supplies from ±1.5 V to ±8 V, while its open-drain outputs can be pulled up to the voltage required by the downstream controller.

⚡

Power-Supply Overvoltage Detection

The TS374IDT can implement multiple protection thresholds around regulated power rails. Its 3 V to 16 V single-supply capability covers common low-voltage systems, while the 600 ns maximum response time provides prompt fault signaling. The 12 mV maximum input offset voltage is relevant when defining narrow protection windows, so designers should account for resistor tolerance and input imbalance. Open-drain outputs allow fault signals from multiple channels to be combined where the system architecture supports wired-AND behavior.

🖥️

Logic Level and Window Monitoring

Four independent TS374IDT channels can monitor upper and lower limits of two signals, creating two window detectors without duplicating comparator packages. The very low typical input bias current of 1 pA minimizes disturbance of the monitored voltage, while open-drain outputs provide flexible logic interfacing. The device can run from dual supplies of ±1.5 V to ±8 V when the monitored signals include negative levels, or from a single 3 V to 16 V rail in unipolar systems.

🔧

Motor and Actuator Control

The TS374IDT can compare position, limit, or feedback voltages used in industrial actuator-control systems. Its 600 ns maximum response time allows the comparator output to initiate a control transition quickly enough for many non-safety-critical loops, and the quad architecture consolidates several limit checks. Supply-current demand of approximately 0.1 mA per comparator is useful in distributed equipment. Output pull-up values should be selected to match the control-logic voltage and required rise time.

📱

Portable Test and Measurement Equipment

The TS374IDT is useful in handheld meters and test equipment that require several live threshold comparisons without excessive power use. Its four channels share one 14-pin SOIC package, and typical current consumption of 0.1 mA per comparator supports longer operating time between battery charges. The 1 pA typical input bias current reduces loading on probes and high-impedance dividers. Designers should verify the input common-mode range at the selected supply voltage and use suitable pull-up resistors for the open-drain outputs.

What is the STMicroelectronics TS374IDT?
The TS374IDT is a low-power quad CMOS voltage comparator containing four comparison channels in a 14-pin SOIC. According to the STMicroelectronics TS374 datasheet, each channel can operate from a single 3 V to 16 V supply or from dual supplies of ±1.5 V to ±8 V, making the device suitable for compact, low-power sensing and control circuits.
What are the key specifications of TS374IDT that engineers should know?
The TS374IDT combines four CMOS comparator channels, open-drain outputs, 0.1 mA typical supply current per comparator, and a 600 ns maximum response time. According to the STMicroelectronics TS374 datasheet, the maximum input offset voltage is 12 mV, while typical input bias current and input offset current are each 1 pA, supporting accurate sensing from high-impedance sources.
What is the operating voltage range of TS374IDT?
The TS374IDT operates from 3 V to 16 V with a single supply or from ±1.5 V to ±8 V with dual supplies. According to the STMicroelectronics TS374 datasheet, this flexible range allows the comparator to be used in low-voltage logic systems as well as bipolar analog circuits requiring positive and negative rails.
Does TS374IDT have an open-drain output?
Yes, every TS374IDT comparison channel uses an open-drain output. According to the STMicroelectronics TS374 datasheet, the open-drain transistor must be connected through an external pull-up resistor when a logic-high output is required, and multiple channels can share a wired-AND pull-up when appropriate.
How much current does each TS374IDT comparator consume?
Each TS374IDT comparator consumes approximately 0.1 mA of supply current, independent of the supply voltage. According to the STMicroelectronics TS374 datasheet, this low consumption is suitable for battery-operated monitoring equipment, portable instruments, and other systems that keep four continuous comparison channels active.
What is the response time of TS374IDT?
The TS374IDT response time is 600 ns maximum. According to the STMicroelectronics TS374 datasheet, this operating speed is suitable for threshold detection, protection functions, and control loops that do not require the very fast transition times of dedicated high-speed comparator families.
Where can I download the TS374IDT datasheet PDF?
The official TS374IDT datasheet PDF is available through the STMicroelectronics technical-document link on this page. The document identifies the device as a low-power quad CMOS voltage comparator and covers its supply configurations, input characteristics, output behavior, and recommended application conditions.
Where can I find the TS374IDT pinout?
The TS374IDT pinout is shown in the pin-description table of the STMicroelectronics TS374 datasheet. The device uses a 14-pin SOIC, so PCB assignments should follow that diagram rather than relying on a quad comparator from another manufacturer, whose input, output, supply, and exposed-pin arrangements may differ.
TS374IDT vs TS374ID — which is the better replacement?
The TS374IDT is the ordering option identified as the available substitute for the obsolete TS374ID in the manufacturer-family cross-reference results. According to the STMicroelectronics product listings, TS374ID is no longer manufactured, so TS374IDT is the practical choice for new production and replacement demand.
When should I choose TS374IDT over a single-channel comparator?
Choose the TS374IDT when a design requires four voltage comparisons while conserving board area. Its four open-drain channels consume approximately 0.1 mA per comparator according to the STMicroelectronics TS374 datasheet, making it more efficient than four separate single-channel packages when all four functions operate simultaneously.
Is TS374IDT suitable for high-impedance sensor interfaces?
Yes, the TS374IDT is suitable for high-impedance sensor interfaces because its typical input bias current and input offset current are only 1 pA. According to the STMicroelectronics TS374 datasheet, this low loading helps preserve sensor signals, although the application must also remain within the specified input common-mode range.
What can replace TS374IDT?
The verified direct replacement is the TS374IDT, which is listed as the active substitute for the obsolete TS374ID. No additional pin-compatible replacement was established from the cross-reference results, so engineers should not treat a generic quad comparator as a drop-in replacement without checking its pinout, output structure, supply range, and common-mode limits.
Is TS374IDT the same as TS374ID?
No. TS374ID and TS374IDT are ordering variants in the same STMicroelectronics comparator family, but TS374ID is listed as obsolete and no longer manufactured. TS374IDT is the available ordering option and should be used for new designs and replacements after confirming its package and temperature ordering requirements.
Where can I buy TS374IDT and what is its lead time?
Use the Request a Quote form on this page to ask about TS374IDT availability, current lead time, minimum order quantity, and shipment options. The manufacturer and distributor listings indicate that the exact part is commercially available, but current production allocation and delivery timing should be confirmed for the required quantity and package suffix.
What is the price of TS374IDT?
The current commercial price for TS374IDT is displayed through the Request a Quote form on this page. Submit the required quantity and shipment details to obtain an updated quotation, rather than relying on an older distributor listing that may not reflect current inventory, packaging, or supply conditions.

के लिए इंजीनियरिंग संदर्भ डेटा TS374IDT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the TS374IDT for low-power systems requiring four voltage comparisons, especially when each channel must monitor a different threshold and the PCB area saved by integrating four comparators is valuable. Its approximately 0.1 mA per-comparator supply current, 1 pA typical input bias current, flexible supply configurations, and open-drain outputs make it appropriate for battery-powered sensing, industrial threshold detection, and window monitoring. Select the obsolete TS374ID only when repairing a legacy assembly where the original ordering code and supply condition are already established. The LM2904PWR may be preferable for a design requiring only two conventional comparator channels, but it consumes more current and does not consolidate four functions into one package. For any proposed replacement, verify the 14-pin SOIC pinout, input common-mode range, output polarity, pull-up arrangement, offset voltage, and supply requirements before releasing a PCB revision.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद TS374ID
Package 14-pin SOIC 14-pin SOIC
Brand STMicroelectronics STMicroelectronics
Number of Channels 4 channels 4 channels
Comparator Technology CMOS CMOS
Single Supply Range 3 V to 16 V 3 V to 16 V
Dual Supply Range +/-1.5 V to +/-8 V +/-1.5 V to +/-8 V
Supply Current per Comparator 0.1 mA typical 0.1 mA typical
Maximum Input Offset Voltage 12 mV 12 mV
Response Time 600 ns maximum 600 ns maximum
Output Type Open-drain Open-drain
Lifecycle Status Active Obsolete

मुख्य विशेषताएँ

  • Four independent comparisons in one package (बनामLM2904PWR)
  • Very low typical input bias current (बनामTS374ID)
  • Flexible single- and dual-supply operation (बनामTS374ID)
  • Lower typical supply demand per channel (बनामLM2904PWR)

डिज़ाइन नोट्स

Place a local supply bypass capacitor close to the TS374IDT supply pins and route the return directly to the device ground. Although the typical supply demand is only 0.1 mA per comparator, long supply traces can couple switching noise into a high-impedance comparison. Keep the bypass loop compact, and check the comparator common-mode range throughout startup and shutdown rather than assuming it remains valid while the rail is collapsing.

Treat the four comparator channels as sensitive analog paths even though the device is digital-output oriented. Keep high-impedance input nets short, avoid routing them beside switching nodes, and connect the open-drain pull-ups close to the output pins. If multiple outputs share a wired-AND bus, use one pull-up sized for the aggregate sink current and ensure every connected output is compatible with the shared logic level.

Do not substitute a generic four-channel comparator without checking pin assignments, input common-mode limits, output polarity, and supply-current behavior. The TS374IDT uses open-drain outputs that require pull-up resistors, and its maximum input offset voltage is 12 mV. For narrow threshold windows, include resistor tolerance and temperature effects in the error budget rather than relying solely on the nominal offset specification.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The component data does not provide a definitive RoHS, REACH, automotive-qualification, lead-free, halogen-free, or conflict-minerals declaration.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

TS374IDT datasheet TS374IDT pinout TS374IDT datasheet pdf TS374IDT equivalent TS374IDT replacement TS374IDT cross reference TS374IDT vs TS374ID TS374IDT price TS374IDT stock STMicroelectronics TS374IDT TS374IDT SOIC-14 pinout TS374IDT application circuit

संबंधित कंपोनेंट्स और शब्द

STMicroelectronics TS374IDT TS374ID LM2904PWR voltage comparator quad comparator analog comparator comparator IC low-power comparator CMOS open-drain output wired-AND single-supply operation dual-supply operation input offset voltage input bias current input offset current supply current per comparator response time SOIC-14 surface-mount package industrial sensor interfacing battery-powered threshold detection power-supply overvoltage detection
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें