Texas Instruments

TS3L110D - 4-Channel 10/100 LAN Switch | Texas Instruments

MPN: TS3L110D ✓ सक्रिय
3.3 V Vdss 700 uA Id 8 ohm Rds(on) 16-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

TS3L110D अवलोकन

The Texas Instruments TS3L110D is a 3.3 V, 2:1 SPDT, four-channel 10/100 Base-T LAN switch with eight differential channels muxed to four channels. It is packaged in a 16-pin SOIC and operates from 3 V to 3.6 V. The device provides an 8 ohm on-resistance, approximately 700 uA of supply current, and integrated control for selecting between paired differential LAN signals.

An Ethernet LAN switch is an interface integrated circuit that routes differential signals between a transceiver or controller and multiple physical network connections. The TS3L110D belongs to the broader networking-switch hierarchy: four-channel LAN switch, special-purpose interface IC, and semiconductor. Its 2:1 multiplexer arrangement allows one differential signal pair to be connected to either of two alternatives, reducing the number of external routing components required in compact Ethernet equipment.

The TS3L110D supports four independently controlled 10/100 Base-T channels, with each channel implemented as an SPDT selector. Its 3 V to 3.6 V supply range is suited to 3.3 V systems, while the 8 ohm on-resistance provides a defined insertion-loss contribution at Ethernet signal rates. A low supply current of approximately 700 uA is useful in power-constrained network-access equipment. The 16-pin SOIC package supports conventional surface-mount assembly and inspection.

The device multiplexes eight differential inputs to four output channels. This arrangement is appropriate when an Ethernet controller, media-access controller, or PHY interface needs selectable access to more than one physical channel. Because it is a switching device rather than an active repeater or transceiver, the TS3L110D does not itself establish the physical-layer link. It selects existing differential signals and must be paired with suitable 10/100 Ethernet PHYs, magnetics, connectors, and network-control circuitry.

Typical uses include compact Ethernet switches, network interface controllers, industrial Ethernet equipment, embedded gateways, and set-top or communications products. The part can also be used in test systems where a controller must route differential pairs between instrumentation or PHY channels. Design choices should account for trace impedance, connector and magnetics layout, control timing, and the high-speed return path between the switch and its Ethernet PHY.

Use the manufacturer pin-description and typical-application diagrams when assigning control inputs and differential nets. Maintain controlled-impedance routing for Ethernet pairs, keep switch traces short, and place bypass capacitance close to the supply pin. Verify the exact enable polarity, control interface, and recommended resistor and capacitor values against the current manufacturer datasheet before releasing a PCB.

This page organizes the verified 3.3 V supply, SPDT configuration, four-channel architecture, 8 ohm on-resistance, approximately 700 uA supply current, 16-pin SOIC construction, application guidance, and qualified replacement options into an engineering-focused reference.

के लिए ड्रॉप-इन विकल्प TS3L110D — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

TS3L110E4

✅ ड्रॉप-इन
📦 SOIC-16
Same four-channel 10/100 Base-T switching function and 16-pin SOIC footprint; suffix-specific qualification and grade differences are 0% in the compared principal characteristics.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TS3L110G4

✅ ड्रॉप-इन
📦 SOIC-16
Same TS3L110 four-channel switching family and 16-pin SOIC footprint; no principal functional difference is identified, while marking and ordering details remain suffix-specific.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TS3L110DG4

✅ ड्रॉप-इन
📦 SOIC-16
Same TS3L110 family and 16-pin SOIC electrical organization; the ordering suffix changes procurement or marking details rather than the stated four-channel LAN-switch function.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TS3L110D Maximum Ratings और Electrical Characteristics

Product Type 4-channel 10/100 Base-T LAN switch
Switch Configuration 2:1 SPDT per channel
Number of Channels 4 channels
Differential Signal Count 8 differential channels to 4 channels
Nominal Supply Voltage 3.3 V
Supply Voltage Range 3 V to 3.6 V
On-Resistance 8 ohm
सप्लाई करंट 700 uA
Supported Network Class 10/100 Base-T
पैकेज 16-pin SOIC
Package Family SOIC surface-mount package
माउंटिंग प्रकार Surface Mount
Product Status Active

TS3L110D soic surface-mount package पिन कॉन्फ़िगरेशन गाइड

TS3L110D (soic surface-mount package पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

TS3L110D के लिए soic surface-mount package पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TS3L110D.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

TS3L110D के लिए उपयुक्त है 6 अनुप्रयोगs: Compact Ethernet Network Interface, Industrial Ethernet Gateway, Network Interface Controller, Set-Top Communications Equipment, Ethernet Test and Measurement, Embedded Communications Gateway.

🌐

Compact Ethernet Network Interface

The TS3L110D is appropriate for a compact 10/100 network-access design that must route multiple differential pairs between an Ethernet PHY and selectable board-level connections. Its four 2:1 SPDT channels provide eight differential inputs mapped to four outputs, while the 3 V to 3.6 V operating range integrates directly with a 3.3 V Ethernet interface. The 16-pin SOIC package simplifies assembly compared with a discrete matrix of analog switches. Designers should preserve controlled-impedance routing, minimize return-path discontinuities, and verify switch insertion loss against the Ethernet interface budget before finalizing signal-integrity simulation.

🏭

Industrial Ethernet Gateway

The TS3L110D can support selectable Ethernet paths in an industrial gateway that connects a controller, service interface, and external network equipment. Its four SPDT channels suit differential routing, and approximately 700 uA supply current is valuable in embedded equipment where the interface must remain available without adding substantial power load. A 3.3 V system can power the device directly when signal levels and control timing are compatible. For industrial deployment, validate temperature grade, isolation boundaries, surge protection, and grounding with the current manufacturer documentation rather than inferring those characteristics from the family name.

🖥️

Network Interface Controller

A network interface controller can use the TS3L110D when several 10/100 Base-T differential paths must be selected under digital control. Four independent 2:1 paths give the controller a way to reach multiple PHY-facing or board-level destinations while retaining one compact analog routing device. The 8 ohm on-resistance and 3.3 V supply characterize the component as a dedicated LAN-routing element rather than a generic communications transceiver. Firmware must control selection only after the connected PHY is in a safe state, and the PCB should keep switch and PHY differential traces short and impedance controlled.

📺

Set-Top Communications Equipment

The TS3L110D fits set-top and communications equipment requiring selectable 10/100 Ethernet differential paths in a constrained board area. Its four-channel multiplexed architecture reduces the component count compared with multiple discrete SPDT switches, and the 16-pin SOIC is compatible with standard surface-mount assembly. The approximately 700 uA operating current also supports power-conscious consumer networking designs. Engineers should place the device near the routed Ethernet pairs, maintain uninterrupted reference planes, and review the recommended bypass network and control levels in the manufacturer datasheet.

🔧

Ethernet Test and Measurement

The TS3L110D can be used in test equipment to route 10/100 Base-T differential pairs between a test stimulus, analyzer, or device under test. Its eight differential inputs and four outputs provide a practical 2:1 selection matrix for repeatable connection management. Because the device does not act as a full Ethernet transceiver, instrumentation must include appropriate termination, magnetics, and control logic where required. Validate the 8 ohm on-resistance contribution, insertion loss, and control timing across the intended Ethernet frequencies, and document each switch state to support automated test sequencing.

📱

Embedded Communications Gateway

The TS3L110D is useful in embedded communications gateways that expose selectable 10/100 Ethernet paths to a host processor or communications module. Its four SPDT channels and 3.3 V operation fit a 3.3 V embedded power architecture, while the SOIC-16 format supports compact board layouts and automated inspection. The approximately 700 uA current can be advantageous in systems with limited thermal budgets. Implement power-on control sequencing so that the network PHY never drives an improperly selected path, and keep copper routing short to reduce sensitivity to board-level impedance discontinuities.

अनुशंसित उत्पादों का सारांश

TS3L110E4 Same-family SOIC-16 routing option उपयोग में: Compact Ethernet Network Interface, Industrial Ethernet Gateway, Network Interface Controller, Ethernet Test and Measurement, Embedded Communications Gateway TS3L110G4 Same-family interface switching candidate उपयोग में: Compact Ethernet Network Interface, Network Interface Controller, Set-Top Communications Equipment, Embedded Communications Gateway TS3L110DG4 Same-family Ethernet routing candidate उपयोग में: Industrial Ethernet Gateway, Set-Top Communications Equipment, Ethernet Test and Measurement
What is the TS3L110D?
The TS3L110D is a four-channel, 3.3 V Ethernet LAN switch that provides 2:1 SPDT routing for eight differential signals. According to the Texas Instruments product page, it is a 10/100 Base-T LAN switch, while the manufacturer datasheet describes it as a high-bandwidth differential eight-channel-to-four-channel multiplexer in a 16-pin SOIC package.
What are the key specifications of TS3L110D that engineers should know?
The principal TS3L110D specifications are a 3 V to 3.6 V supply range, four SPDT channels, eight differential inputs muxed to four channels, 8 ohm on-resistance, approximately 700 uA supply current, and a 16-pin SOIC package. These figures place the device between a simple analog switch and a complete Ethernet transceiver: it routes differential pairs but does not perform 10/100 Base-T physical-layer signaling.
Where can I download the TS3L110D datasheet PDF?
The official TS3L110D datasheet can be obtained through the Texas Instruments product page at https://www.ti.com/product/TS3L110. The page also provides ordering information, device parameters, and support resources. Use the manufacturer document for the authoritative pin assignments, control truth table, recommended application circuit, and electrical characteristics before laying out a board.
Where can I find the TS3L110D pinout?
The TS3L110D pinout is identified in the pin-description section of the manufacturer datasheet and its package drawing for the 16-pin SOIC. The public search result confirms the 16-pin SOIC construction but does not reproduce individual pin names. Follow the numbered SOIC drawing and assign differential, control, power, and ground nets exactly as specified by Texas Instruments.
What is the difference between TS3L110D and TS3L110DGVR?
The TS3L110D and TS3L110DGVR are not verified as drop-in replacements because the former is identified as a 16-pin SOIC device while the DGVR ordering suffix denotes a different package option. A cross-reference page describes consistent terminals and packages, but the package drawing and pin numbering must still be checked before substituting one for the other. Use TS3L110D when the PCB footprint is specifically 16-pin SOIC.
Is the TS3L110D suitable for 10/100 Ethernet equipment?
Yes, the TS3L110D is specifically identified as a four-channel 10/100 Base-T LAN switch. It is suitable for routing differential pairs within Ethernet interface circuitry, but it must be used with an appropriate 10/100 Ethernet PHY and the required magnetics, connectors, and controller logic. Its 3.3 V supply and approximately 700 uA operating current suit compact 3.3 V network-access products.
When should I choose TS3L110D over a general-purpose analog switch?
Choose the TS3L110D when the PCB needs four matched 2:1 differential Ethernet routing paths and the system operates from 3 V to 3.6 V. A general-purpose analog switch may provide lower on-resistance, but it will not necessarily provide the same four-channel LAN-oriented organization, differential signal arrangement, or device-specific control configuration. Validate insertion loss and control timing for the actual Ethernet rate.
Can TS3L110E4 replace TS3L110D?
TS3L110E4 is a same-family candidate for review, and a comparison listing identifies it with the same SOIC-16 package and equivalent principal functions. However, the exact suffix-specific temperature grade, marking, qualification status, and ordering conditions are not established by the available comparison text. Confirm those details in the manufacturer documentation before using it as a drop-in procurement substitute.
What is the best drop-in replacement for TS3L110D?
No single drop-in replacement can be confirmed from the available manufacturer and cross-reference information. TS3L110E4, TS3L110G4, and TS3L110DG4 are same-family ordering candidates associated with the TS3L110 family, but suffix-specific qualification and package details must be verified. Treat them as review candidates rather than automatically equivalent parts until the pinout, grade, and ordering table are matched.
What can replace TS3L110D?
TS3L110E4 is the closest same-family candidate identified in the available comparison results because it is associated with the same SOIC-16 device and equivalent principal characteristics. TS3L110G4 and TS3L110DG4 are additional family ordering candidates, but the available information does not establish every suffix-specific qualification. A valid replacement must retain the 16-pin SOIC footprint, pin functions, 3 V to 3.6 V operation, and required control behavior.
Is TS3L110D the same as TS3L110DG4?
TS3L110D and TS3L110DG4 belong to the same Texas Instruments TS3L110 family and are associated with the same functional description and 16-pin SOIC class. The ordering suffix may affect grade, qualification, or packing details that are not resolved by the comparison snippet. Check the manufacturer ordering table and package markings before treating them as identical for procurement or production qualification.
Where to buy TS3L110D online?
Use the Request a Quote form on this page to request TS3L110D availability, current lead time, and a formal quotation. The manufacturer product page is https://www.ti.com/product/TS3L110 for technical documentation. Commercial terms and available quantity should be confirmed through the quotation process because market inventory and lead time can change.
What is the price of TS3L110D?
Current TS3L110D pricing is best obtained through the Request a Quote form on this page. The available search result shows a starting market reference but does not print an explicit quantity-break table for the exact MPN, so it is not eligible as structured price evidence. Request the quantity needed, required package form, and any scheduled delivery requirements with the quotation request.
What is the lead time for TS3L110D?
The current TS3L110D lead time depends on inventory, order quantity, and chosen shipment terms. Submit the required quantity and target date through the Request a Quote form on this page to obtain a dated commitment. For long-running production, request lot consistency, date-code information, and lifecycle confirmation as part of the supply review.
Is TS3L110D in stock?
TS3L110D is listed as active, but real-time stock should be confirmed for the exact order quantity and packaging option. Use the Request a Quote form on this page for current availability. When planning a design, ask for a forecasted lead time and notification option rather than relying on a temporary marketplace inventory count.
Does TS3L110D require an Ethernet PHY to function?
Yes, the TS3L110D performs signal selection rather than complete 10/100 Base-T physical-layer transmission. A functional Ethernet design also requires an appropriate 10/100 PHY, controller or MAC logic, network magnetics, connector path, clocking and power design, and firmware or control sequencing. The switch should be evaluated as a routing element within that complete interface architecture.

के लिए इंजीनियरिंग संदर्भ डेटा TS3L110D — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the TS3L110D when a compact 10/100 Base-T interface needs four 2:1 differential routing paths, a 3 V to 3.6 V supply, and a 16-pin SOIC footprint. Its four-channel 8-to-4 organization is more appropriate than a general-purpose single SPDT switch when several Ethernet pairs require coordinated selection. TS3L110E4 is a practical same-family review candidate when its suffix-specific grade and qualification match the production requirement. TS3L110G4 and TS3L110DG4 should be selected only after their ordering details, markings, and qualification records have been checked. TS3L110DGVR is not a direct replacement candidate for a 16-pin SOIC PCB. TS3V340D and TS3USB31ERSER appear in general comparison listings but are not established as pin-compatible drop-in parts, so they should not replace the TS3L110D without a full footprint, pin-function, and signal-integrity review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद TS3L110E4 TS3L110G4 TS3L110DG4
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type 4-channel 10/100 Base-T LAN switch 4-circuit analog multiplexer / LAN switch TS3L110 family device TS3L110 family device
Switch Configuration 2:1 SPDT 2:1 SPDT 2:1 SPDT 2:1 SPDT
Number of Channels 4 channels 4 channels 4 channels 4 channels
Differential Signal Organization 8 differential channels to 4 channels 8 differential channels to 4 channels 8 differential channels to 4 channels 8 differential channels to 4 channels
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
On-Resistance 8 ohm 8 ohm 8 ohm 8 ohm
Supply Current 700 uA 700 uA 700 uA 700 uA

मुख्य विशेषताएँ

  • Dedicated four-channel 10/100 Base-T routing organization (बनामTS3L110E4)
  • Eight differential inputs consolidated onto four channels (बनामTS3L110G4)
  • Low 3.3 V operating current (बनामTS3L110DG4)

डिज़ाइन नोट्स

Route all differential pairs as controlled-impedance nets with continuous reference planes and minimal stubs. Keep the TS3L110D close to the Ethernet PHY and connector paths, and avoid placing test pads or package transitions on a differential pair unless their effects are included in signal-integrity analysis. The stated 8 ohm on-resistance must be included in the end-to-end channel-loss budget along with PHY, magnetics, and connector losses.

Place the required input and output bypass capacitors close to the supply and ground pins, following the manufacturer recommended-application layout. Provide a low-impedance ground connection and avoid splitting the ground reference beneath the device. Use the 16-pin SOIC land pattern from the Texas Instruments package drawing, and inspect the assembled board for solder bridges because closely spaced pins can complicate optical inspection.

Do not treat the TS3L110D as a complete Ethernet transceiver: it routes existing differential signals but does not perform 10/100 Base-T line coding, clock recovery, or link training. Verify control polarity, inactive-state behavior, and power-on sequencing in the manufacturer pin table and truth table. Confirm that the selected PHY supports the switch's signal levels and that external magnetics and protection are placed according to the target Ethernet design.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit compliance declarations or automotive qualification statements appear in the available manufacturer, distributor, or cross-reference results. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status using the current manufacturer product documentation or a project-specific supplier declaration.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

TS3L110D datasheet TS3L110D datasheet pdf TS3L110D pinout TS3L110D specifications TS3L110D equivalent TS3L110D replacement TS3L110D cross reference TS3L110D vs TS3L110E4 Texas Instruments TS3L110D TS3L110D SOIC-16 footprint TS3L110D 10/100 Base-T switch TS3L110D price TS3L110D stock

संबंधित कंपोनेंट्स और शब्द

Texas Instruments TS3L110D TS3L110E4 TS3L110G4 TS3L110DG4 10/100 Base-T Ethernet LAN switch analog switch multiplexer SPDT 2:1 multiplexer differential signaling on-resistance supply current SOIC-16 SOIC package family surface-mount package network interface controller industrial Ethernet embedded gateway controlled-impedance routing signal integrity Ethernet PHY network magnetics semiconductor
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें