VSC7427XJG-12 - 26-Port Gigabit Ethernet Switch | Microchip
MPN: VSC7427XJG-12 ✓ सक्रियVSC7427XJG-12 अवलोकन
An Ethernet switch is a semiconductor that connects multiple network endpoints by forwarding Ethernet frames between ports according to MAC-address tables. A Gigabit Ethernet switch supports data rates up to 1 Gb/s per active port. By integrating 12 copper PHYs and 14 SerDes interfaces into one package, the VSC7427 reduces board area, interface complexity, and the number of external PHY components required for a multiport network system.
The principal feature of the VSC7427 is its combination of 26 logical ports, 12 integrated copper PHYs, and 14 SerDes interfaces. In conjunction with the Microsemi VSC8512 or VSC8522 12-port PHY, it can form a 26-port Gigabit Ethernet design using two integrated circuits. Its 65 nm SimpliPHY implementation is positioned as a low-power, cost-effective architecture for high-port-count Ethernet systems. The -12 ordering code identifies the exact Microchip catalog variant, while the family designation VSC7427 identifies the SparX-III-26 switching platform.
The 672-HSBGA package is designed for surface-mount assembly and is supplied in trays according to the product listing. Its 27 x 27 mm footprint demands careful ball-escape planning, multilayer PCB construction, thermal via arrays, and high-density escape routing. Because the device combines high-speed SerDes interfaces, integrated copper PHYs, and a large switching die, the power, ground, clock, and signal-integrity layout must follow the manufacturer's reference design rather than be treated as a generic BGA layout.
Typical uses include access switches, industrial Ethernet gateways, telecom aggregation equipment, storage networks, and embedded network appliances. The integrated copper PHYs reduce system complexity when most deployed endpoints use electrical Ethernet rather than optical fiber. SerDes ports can connect to optical PHYs, backplanes, or additional switching silicon when a design requires fiber uplinks or greater port density.
A key design trade-off is package complexity. Integrating 12 PHYs into the switch package simplifies the board-level Ethernet interface, but the 672-ball BGA requires careful escape routing and inspection. Use the Microchip VSC7427 product brief and evaluation-platform documentation for reference layouts, clock requirements, power sequencing, media-dependent interface behavior, and thermal design. This page consolidates the confirmed family specifications, package information, sourcing guidance, and practical implementation considerations into one engineering-focused reference.
के लिए ड्रॉप-इन विकल्प VSC7427XJG-12 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
VSC7427XJG-02
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
VSC7427XJG-03
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
VSC7427XJG-10
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
VSC7427XJG-12 Maximum Ratings और Electrical Characteristics
| Product Type | Fully integrated 26-port Gigabit Ethernet switch |
| Total Switch Ports | 26 ports |
| Integrated Copper PHY Ports | 12 ports |
| SerDes Interfaces | 14 interfaces |
| Maximum Copper Ethernet Rate | 1000 Mb/s per port |
| Supported Copper Ethernet Modes | 10/100/1000BASE-T |
| Switching Architecture | SparX-III-26 |
| Process Technology | 65 nm SimpliPHY technology |
| Package Type | 672-HSBGA |
| Package Dimensions | 27 x 27 mm |
| माउंटिंग प्रकार | Surface mount |
| Shipping Format | Tray |
| Product Family | VSC7427 |
| Compatible External PHY Examples | VSC8512 or VSC8522 |
| Two-Chip 26-Port Configuration | VSC7427 plus VSC8512 or VSC8522 |
VSC7427XJG-12 27 x 27 mm पिन कॉन्फ़िगरेशन गाइड
VSC7427XJG-12 (27 x 27 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: VSC7427XJG-12.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
VSC7427XJG-12 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, Telecom Access and Aggregation Equipment, Enterprise Network Edge Switch, Storage and Network Appliance, Optical Network Terminal, Video and Security Network Aggregation.
Industrial Ethernet Gateway
The VSC7427XJG-12 fits industrial gateways that must aggregate numerous wired endpoints while minimizing the number of external Ethernet components. Its 12 integrated 10/100/1000BASE-T PHYs support direct copper connections for controllers, cameras, programmable logic controllers, and service equipment. The remaining 14 SerDes interfaces provide a path to backplane connectivity or optical uplinks. This integration reduces the PHY count compared with a discrete switch architecture, but the 672-HSBGA package requires multilayer routing, dense escape traces, and thermal vias. Ethernet protocol support, surge requirements, isolation boundaries, and the exact operating-temperature grade must be verified against the industrial system requirements.
अनुशंसित
Telecom Access and Aggregation Equipment
The VSC7427XJG-12 is suited to telecom access and aggregation equipment requiring a high density of Ethernet ports in one switching device. The 26-port SparX-III-26 architecture combines 14 SerDes links with 12 integrated copper PHYs, allowing service equipment to support subscriber Ethernet alongside backplane or optical connections. A VSC8512 or VSC8522 can add another 12 copper ports, producing a 26-port copper design with two ICs. This arrangement reduces board space and external PHY inventory, although power planning, SerDes clocking, management firmware, and thermal design must be coordinated. Telecom-grade qualification and lifecycle requirements should be checked for the selected -12 ordering code.
अनुशंसित
Enterprise Network Edge Switch
The VSC7427XJG-12 can serve as the switching core in an enterprise edge appliance where numerous 1 Gb/s copper endpoints must converge on a small number of uplinks. Its 12 integrated PHYs provide direct Gigabit Ethernet access, while the 14 SerDes interfaces can connect to optical PHYs or higher-bandwidth backplanes. For a larger access count, pairing the switch with a VSC8512 or VSC8522 yields 26 copper ports using two devices. The design benefits from fewer external PHYs and shorter copper-side routing, but software support, management features, switch-table behavior, and thermal margins should be validated. The large BGA also requires careful assembly and inspection planning.
अनुशंसित
Storage and Network Appliance
The VSC7427XJG-12 is appropriate for storage gateways and network appliances that need a large number of copper Ethernet connections in a constrained chassis. The 12 integrated Gigabit PHYs can serve management ports, service ports, and storage-facing links, while the 14 SerDes channels support high-speed fabric connections or optional optical uplinks. Consolidating copper termination inside the switch package reduces board-level PHY count and can simplify front-panel interconnect design. Conversely, the 672-HSBGA package concentrates heat and complicates signal escape routing, so designers should follow the manufacturer reference layout, allocate multiple power rails, and use dense via arrays for thermal and electrical performance.
अनुशंसित
Optical Network Terminal
The VSC7427XJG-12 fits optical network terminals in which copper service ports and high-speed SerDes uplinks must coexist. Its 14 SerDes interfaces can support compatible optical PHYs or internal transport links, while 12 integrated 10/100/1000BASE-T PHYs provide direct customer-facing Ethernet. This combination allows a compact line-card architecture without assigning an external PHY to every copper service port. The SerDes operating modes, reference clocks, equalization, lane rates, and management firmware must be configured together. Thermal performance is especially important in sealed access hardware because the 672-HSBGA offers substantial silicon functionality in a 27 x 27 mm footprint and requires effective heat spreading into the PCB.
अनुशंसित
Video and Security Network Aggregation
The VSC7427XJG-12 can support video and security systems that connect many fixed cameras, encoders, and access-control endpoints over Gigabit Ethernet. Its 12 integrated copper PHYs reduce the number of external Ethernet components on a recorder or gateway board, while the 14 SerDes interfaces provide flexible uplink expansion. A second VSC8512 or VSC8522 can double the direct copper-port count to 26 using only two switching-related ICs. This topology is attractive where enclosure space is constrained and many devices connect over copper. Designers must still account for cable insertion, isolation, surge protection, power budget, and the thermal load created by simultaneous 1 Gb/s port activity.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा VSC7427XJG-12 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | VSC7427XJG-02 | VSC7427XJG-03 | VSC7427XJG-10 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 672-HSBGA (27x27) | 672-HSBGA (27x27) | 672-HSBGA (27x27) | 672-HSBGA (27x27) |
| Total Ports | 26 ports | 26 ports | 26 ports | 26 ports |
| Integrated Copper PHY Ports | 12 ports | 12 ports | 12 ports | 12 ports |
| SerDes Interfaces | 14 interfaces | 14 interfaces | 14 interfaces | 14 interfaces |
| Switching Family | SparX-III-26 | SparX-III-26 | SparX-III-26 | SparX-III-26 |
| Maximum Ethernet Rate | 1000 Mb/s per copper port | 1000 Mb/s per copper port | 1000 Mb/s per copper port | 1000 Mb/s per copper port |
| Technology | 65 nm SimpliPHY | 65 nm SimpliPHY | 65 nm SimpliPHY | 65 nm SimpliPHY |
मुख्य विशेषताएँ
- Twelve copper PHYs are integrated into the switching package (बनामVSC7427XJG-02)
- A two-IC architecture can deliver 26 copper Ethernet ports (बनामVSC7427XJG-03)
- Flexible SerDes expansion complements the integrated copper interfaces (बनामVSC7427XJG-10)
डिज़ाइन नोट्स
Treat the 672-HSBGA as a high-density mixed-signal layout rather than a generic digital BGA. Follow the Microchip reference layout for all 26 switch interfaces and preserve the manufacturer-recommended ball-escape geometry. Place decoupling and power-distribution structures directly beneath the device, use multiple power and ground planes, and connect the exposed thermal and ground balls through dense via arrays. Confirm the final stackup, backdrill requirements, via diameters, and solder-mask land patterns with the package drawing.
SerDes routing and copper-PHY escape paths should be designed with controlled impedance and short return paths. Keep high-speed lanes away from noisy switching-power loops, provide continuous reference planes, and use the manufacturer's recommended via transitions and topology. The copper magnetics and line-driver network also require a controlled physical layout to limit insertion loss, crosstalk, and radiated emissions. Validate the complete channel with the manufacturer's compliance or characterization procedure rather than relying only on schematic connectivity.
Power density increases when many copper PHYs and SerDes lanes operate simultaneously, so thermal design must cover worst-case traffic rather than an idle condition. Use the family power tables to calculate dissipation for the configured port count, lane rates, PHY modes, and ambient temperature. Provide a broad copper heat-spreading area under the BGA and dense thermal vias, then verify junction-temperature margin with the package thermal model. Avoid placing temperature-sensitive magnetics or regulators immediately above the switch without an explicit thermal review.
Build the power tree from the manufacturer's rail requirements, including sequencing, tolerances, load currents, and any special SerDes or PHY supply conditions. Do not infer rail values from generic Ethernet-switch designs. Place bulk and high-frequency decoupling at the supply balls, use low-impedance power planes, and isolate switching regulators from sensitive PHY and SerDes sections. Confirm startup behavior in hardware because the integrated copper PHYs and external VSC8512 or VSC8522 must initialize in a controlled order.
A common design error is assuming that identical-looking VSC7427 suffix codes guarantee identical production behavior. Before substitution, compare temperature grade, silicon revision, firmware release, qualification status, lifecycle status, and the exact ordering-information table. Also avoid treating the VSC7428XJG-02 as an automatic substitute: its port architecture and configuration must be verified separately. A valid drop-in decision requires both the 672-HSBGA footprint and functional compatibility of clocks, SerDes lanes, management interfaces, and PHYs.
अनुपालन जानकारी
The confirmed product information does not state the compliance status of the exact VSC7427XJG-12 ordering code. Automotive qualification is not indicated; confirm any specialized qualification requirements directly from Microchip documentation.