Microchip Technology

VSC7427XJG-12 - 26-Port Gigabit Ethernet Switch | Microchip

MPN: VSC7427XJG-12 ✓ فعال
672-HSBGA Package
حداقل سفارش: 1 |

VSC7427XJG-12 نمای کلی

The Microchip Technology VSC7427XJG-12 is a fully integrated 26-port Gigabit Ethernet switch with 12 copper PHYs in a single 672-HSBGA package measuring 27 x 27 mm. It combines 14 SerDes ports with 12 integrated 10/100/1000BASE-T copper PHY ports, allowing a complete Layer 2 switching system to be designed with fewer external components. The device is based on Microsemi's SimpliPHY technology and is intended for telecommunications, industrial, enterprise, and carrier-grade Ethernet equipment.

An Ethernet switch is a semiconductor that connects multiple network endpoints by forwarding Ethernet frames between ports according to MAC-address tables. A Gigabit Ethernet switch supports data rates up to 1 Gb/s per active port. By integrating 12 copper PHYs and 14 SerDes interfaces into one package, the VSC7427 reduces board area, interface complexity, and the number of external PHY components required for a multiport network system.

The principal feature of the VSC7427 is its combination of 26 logical ports, 12 integrated copper PHYs, and 14 SerDes interfaces. In conjunction with the Microsemi VSC8512 or VSC8522 12-port PHY, it can form a 26-port Gigabit Ethernet design using two integrated circuits. Its 65 nm SimpliPHY implementation is positioned as a low-power, cost-effective architecture for high-port-count Ethernet systems. The -12 ordering code identifies the exact Microchip catalog variant, while the family designation VSC7427 identifies the SparX-III-26 switching platform.

The 672-HSBGA package is designed for surface-mount assembly and is supplied in trays according to the product listing. Its 27 x 27 mm footprint demands careful ball-escape planning, multilayer PCB construction, thermal via arrays, and high-density escape routing. Because the device combines high-speed SerDes interfaces, integrated copper PHYs, and a large switching die, the power, ground, clock, and signal-integrity layout must follow the manufacturer's reference design rather than be treated as a generic BGA layout.

Typical uses include access switches, industrial Ethernet gateways, telecom aggregation equipment, storage networks, and embedded network appliances. The integrated copper PHYs reduce system complexity when most deployed endpoints use electrical Ethernet rather than optical fiber. SerDes ports can connect to optical PHYs, backplanes, or additional switching silicon when a design requires fiber uplinks or greater port density.

A key design trade-off is package complexity. Integrating 12 PHYs into the switch package simplifies the board-level Ethernet interface, but the 672-ball BGA requires careful escape routing and inspection. Use the Microchip VSC7427 product brief and evaluation-platform documentation for reference layouts, clock requirements, power sequencing, media-dependent interface behavior, and thermal design. This page consolidates the confirmed family specifications, package information, sourcing guidance, and practical implementation considerations into one engineering-focused reference.

جایگزین‌های drop-in برای VSC7427XJG-12 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

VSC7427XJG-02

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 672-HSBGA (27x27)
Same-family suffix with the same 26-port switching platform and 672-HSBGA footprint; ordering-code revision, grade, firmware, and lifecycle differences require confirmation, while confirmed electrical port counts are unchanged

📋 جایگزین مرجع (خارج از کاتالوگ)

VSC7427XJG-03

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 672-HSBGA (27x27)
Same-family suffix with the same 26-port switching platform and 672-HSBGA footprint; revision, qualification, and firmware differences must be checked, with no confirmed change to the 26-port headline configuration

📋 جایگزین مرجع (خارج از کاتالوگ)

VSC7427XJG-10

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 672-HSBGA (27x27)
Same-family suffix with the same 26-port switching platform and 672-HSBGA footprint; suffix-specific grade, revision, and lifecycle characteristics remain the distinguishing qualification variables

📋 جایگزین مرجع (خارج از کاتالوگ)

VSC7427XJG-12 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type Fully integrated 26-port Gigabit Ethernet switch
Total Switch Ports 26 ports
Integrated Copper PHY Ports 12 ports
SerDes Interfaces 14 interfaces
Maximum Copper Ethernet Rate 1000 Mb/s per port
Supported Copper Ethernet Modes 10/100/1000BASE-T
Switching Architecture SparX-III-26
Process Technology 65 nm SimpliPHY technology
Package Type 672-HSBGA
Package Dimensions 27 x 27 mm
نوع نصب Surface mount
Shipping Format Tray
Product Family VSC7427
Compatible External PHY Examples VSC8512 or VSC8522
Two-Chip 26-Port Configuration VSC7427 plus VSC8512 or VSC8522

راهنمای پیکربندی پین VSC7427XJG-12 27 x 27 mm

پیکربندی پین برای VSC7427XJG-12 (پکیج 27 x 27 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 27 x 27 mm برای VSC7427XJG-12

داده پین‌آوت تفصیلی موجود نیست برای VSC7427XJG-12.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

VSC7427XJG-12 مناسب است برای 6 کاربردs: Industrial Ethernet Gateway, Telecom Access and Aggregation Equipment, Enterprise Network Edge Switch, Storage and Network Appliance, Optical Network Terminal, Video and Security Network Aggregation.

🏭

Industrial Ethernet Gateway

The VSC7427XJG-12 fits industrial gateways that must aggregate numerous wired endpoints while minimizing the number of external Ethernet components. Its 12 integrated 10/100/1000BASE-T PHYs support direct copper connections for controllers, cameras, programmable logic controllers, and service equipment. The remaining 14 SerDes interfaces provide a path to backplane connectivity or optical uplinks. This integration reduces the PHY count compared with a discrete switch architecture, but the 672-HSBGA package requires multilayer routing, dense escape traces, and thermal vias. Ethernet protocol support, surge requirements, isolation boundaries, and the exact operating-temperature grade must be verified against the industrial system requirements.

🌐

Telecom Access and Aggregation Equipment

The VSC7427XJG-12 is suited to telecom access and aggregation equipment requiring a high density of Ethernet ports in one switching device. The 26-port SparX-III-26 architecture combines 14 SerDes links with 12 integrated copper PHYs, allowing service equipment to support subscriber Ethernet alongside backplane or optical connections. A VSC8512 or VSC8522 can add another 12 copper ports, producing a 26-port copper design with two ICs. This arrangement reduces board space and external PHY inventory, although power planning, SerDes clocking, management firmware, and thermal design must be coordinated. Telecom-grade qualification and lifecycle requirements should be checked for the selected -12 ordering code.

🖥️

Enterprise Network Edge Switch

The VSC7427XJG-12 can serve as the switching core in an enterprise edge appliance where numerous 1 Gb/s copper endpoints must converge on a small number of uplinks. Its 12 integrated PHYs provide direct Gigabit Ethernet access, while the 14 SerDes interfaces can connect to optical PHYs or higher-bandwidth backplanes. For a larger access count, pairing the switch with a VSC8512 or VSC8522 yields 26 copper ports using two devices. The design benefits from fewer external PHYs and shorter copper-side routing, but software support, management features, switch-table behavior, and thermal margins should be validated. The large BGA also requires careful assembly and inspection planning.

🖥️

Storage and Network Appliance

The VSC7427XJG-12 is appropriate for storage gateways and network appliances that need a large number of copper Ethernet connections in a constrained chassis. The 12 integrated Gigabit PHYs can serve management ports, service ports, and storage-facing links, while the 14 SerDes channels support high-speed fabric connections or optional optical uplinks. Consolidating copper termination inside the switch package reduces board-level PHY count and can simplify front-panel interconnect design. Conversely, the 672-HSBGA package concentrates heat and complicates signal escape routing, so designers should follow the manufacturer reference layout, allocate multiple power rails, and use dense via arrays for thermal and electrical performance.

📡

Optical Network Terminal

The VSC7427XJG-12 fits optical network terminals in which copper service ports and high-speed SerDes uplinks must coexist. Its 14 SerDes interfaces can support compatible optical PHYs or internal transport links, while 12 integrated 10/100/1000BASE-T PHYs provide direct customer-facing Ethernet. This combination allows a compact line-card architecture without assigning an external PHY to every copper service port. The SerDes operating modes, reference clocks, equalization, lane rates, and management firmware must be configured together. Thermal performance is especially important in sealed access hardware because the 672-HSBGA offers substantial silicon functionality in a 27 x 27 mm footprint and requires effective heat spreading into the PCB.

🎥

Video and Security Network Aggregation

The VSC7427XJG-12 can support video and security systems that connect many fixed cameras, encoders, and access-control endpoints over Gigabit Ethernet. Its 12 integrated copper PHYs reduce the number of external Ethernet components on a recorder or gateway board, while the 14 SerDes interfaces provide flexible uplink expansion. A second VSC8512 or VSC8522 can double the direct copper-port count to 26 using only two switching-related ICs. This topology is attractive where enclosure space is constrained and many devices connect over copper. Designers must still account for cable insertion, isolation, surge protection, power budget, and the thermal load created by simultaneous 1 Gb/s port activity.

خلاصه محصولات پیشنهادی

VSC8512 12-port external copper PHY for a two-IC 26-port design استفاده‌شده در: Industrial Ethernet Gateway, Telecom Access and Aggregation Equipment, Enterprise Network Edge Switch, Storage and Network Appliance, Optical Network Terminal, Video and Security Network Aggregation VSC8522 Alternate 12-port external copper PHY family member استفاده‌شده در: Industrial Ethernet Gateway, Telecom Access and Aggregation Equipment, Enterprise Network Edge Switch, Storage and Network Appliance, Optical Network Terminal, Video and Security Network Aggregation KSZ8041TLI-TR Microchip Technology استفاده‌شده در: Industrial Ethernet Gateway VSC8574XKS-02 Microchip Technology استفاده‌شده در: Telecom Access and Aggregation Equipment LAN9313I-NZW-TR Microchip Technology استفاده‌شده در: Enterprise Network Edge Switch KSZ8081RNACA Microchip Technology استفاده‌شده در: Storage and Network Appliance KSZ8041RNL-TR Microchip Technology استفاده‌شده در: Optical Network Terminal KSZ8721BLI-TR Microchip Technology استفاده‌شده در: Video and Security Network Aggregation
What is the Microchip VSC7427XJG-12?
The VSC7427XJG-12 is a fully integrated 26-port Gigabit Ethernet switch with 12 copper PHYs and 14 SerDes interfaces. According to the Microchip VSC7427 product brief, the device uses 65 nm SimpliPHY technology and is packaged in a 672-HSBGA measuring 27 x 27 mm. It is designed for high-port-count telecom, industrial, and enterprise Ethernet systems where integrating copper PHYs directly into the switching silicon reduces external component count.
How many Gigabit Ethernet ports does VSC7427XJG-12 provide?
The VSC7427XJG-12 provides 26 switch ports in total, including 12 integrated copper PHY ports and 14 SerDes interfaces. According to the Microchip VSC7427 product brief, the copper ports support Gigabit Ethernet connectivity, while the SerDes interfaces allow additional PHY, backplane, optical, or switching connections. A 26-port copper design can be completed by adding a VSC8512 or VSC8522 12-port PHY.
Does VSC7427XJG-12 require external copper PHYs?
The VSC7427XJG-12 does not require external PHYs for its 12 integrated 10/100/1000BASE-T ports. According to the Microchip VSC7427 product brief, an additional external VSC8512 or VSC8522 is needed only when the system requires all 26 ports to terminate copper Ethernet. The SerDes interfaces provide the expansion path for optical PHYs, backplanes, or other compatible physical-layer devices.
What package does VSC7427XJG-12 use?
The VSC7427XJG-12 uses a 672-HSBGA package measuring 27 x 27 mm and is supplied in a tray. The distributor product listing identifies it as a surface-mount telecom Ethernet-switch IC. A 672-ball package requires multilayer PCB construction, fine-pitch escape routing, thermal-via arrays, and assembly processes capable of handling the package's ball pitch and thermal requirements.
Where can I download the VSC7427XJG-12 datasheet PDF?
The VSC7427 family technical document is available through the Microchip product-brief PDF linked on this page. It describes the 26-port configuration, integrated copper PHYs, SerDes interfaces, and SimpliPHY implementation. For the exact ordering code, also consult the Microchip VSC7427 product page and the VSC7427-02 family datasheet VMDS-10393, which covers the broader VSC7424-02 through VSC7427-02 family.
Where can I find the VSC7427XJG-12 pinout?
The VSC7427XJG-12 pin assignment should be taken from the Microchip VSC7427 family documentation and the associated reference-design material. The confirmed catalog information identifies a 672-HSBGA package, but a numbered ball map is not included in the product summary used for this page. Do not infer the 672 connections from a generic BGA diagram; use the family pin-description table when assigning power, ground, SerDes, clocks, and management signals.
VSC7427XJG-12 vs VSC7428XJG-02: which switch fits a 26-port design?
Choose the VSC7427XJG-12 when the design specifically requires the VSC7427 family's 26-port SparX-III-26 configuration with 12 integrated copper PHYs and 14 SerDes interfaces. The Microchip VSC7427 product brief confirms those characteristics for VSC7427. The VSC7428XJG-02 is a different family member, so it should be selected only after its port count, SerDes width, management features, firmware support, and pin assignments have been verified against the system requirements.
When should I choose VSC7427XJG-12 instead of using two external PHYs?
Choose the VSC7427XJG-12 when a compact design benefits from integrating 12 copper PHYs directly into the Ethernet switch. According to the Microchip VSC7427 product brief, adding one VSC8512 or VSC8522 completes a 26-port copper configuration with two ICs. This approach reduces external PHY count and board-level routing compared with attaching every copper port to separate PHY devices, but it increases BGA-layout complexity.
What can replace the VSC7427XJG-12?
No independently verified drop-in replacement is established for the VSC7427XJG-12. A replacement must preserve the 672-HSBGA footprint, pin functions, 26-port architecture, 12 integrated copper PHYs, 14 SerDes interfaces, power requirements, clocking, management firmware, and thermal constraints. VSC7427 family ordering variants may share the footprint, but firmware revisions, grade codes, temperature ratings, or lifecycle status can affect interchangeability.
Is there a Microchip equivalent for the VSC7427XJG-12?
The closest same-family Microchip candidates are other documented VSC7427 ordering variants, including VSC7427XJG-02, VSC7427XJG-03, and VSC7427XJG-10. These are same-family, same-package candidates, but the available documentation does not establish that every suffix has identical temperature grade, silicon revision, firmware, qualification, or lifecycle status. Confirm those attributes in the Microchip product documentation before treating one as a drop-in replacement.
Is VSC7427XJG-12 suitable for industrial Ethernet equipment?
The VSC7427XJG-12 is technically suitable as the core of a high-port-count Ethernet switching platform, including industrial gateways and telecom equipment. Its 12 integrated Gigabit copper PHYs can simplify industrial panel and controller networks, while the 14 SerDes interfaces support flexible backplane or uplink architectures. The exact industrial temperature range, long-term availability, and qualification status must be confirmed for the -12 ordering code before release.
What are the key specifications of VSC7427XJG-12 that engineers should know?
The key VSC7427XJG-12 specifications are 26 total switch ports, 12 integrated 10/100/1000BASE-T copper PHYs, 14 SerDes interfaces, 65 nm SimpliPHY technology, and a 672-HSBGA package measuring 27 x 27 mm. The Microchip VSC7427 product brief identifies it as a fully integrated Gigabit Ethernet switch designed to work with VSC8512 or VSC8522 for a two-IC, 26-port copper-Ethernet implementation.
How much power does VSC7427XJG-12 consume?
The VSC7427XJG-12's complete power consumption must be evaluated from the Microchip VSC7427 family documentation for the selected core, SerDes, and copper-PHY configurations. Power depends on port activity, SerDes signaling rates, PHY operating modes, voltage rails, and ambient temperature, so a single operating current would not represent a practical design. Use the family's power tables and the device thermal data for board-level heat dissipation and junction-temperature calculations.
Where to buy the VSC7427XJG-12 online?
Use the Request a Quote form on this page to request the exact VSC7427XJG-12 ordering code, quantity, tray requirements, target date, and shipment destination. The confirmed catalog listing identifies a 672-HSBGA, surface-mount, tray-packaged device. Quote review should confirm lifecycle status, allocation, traceability, and whether any regional or quality-document requirements apply before an order is placed.
What is the price and lead time for VSC7427XJG-12?
Use the Request a Quote form on this page for the current unit price, stock position, minimum order quantity, and production lead time for VSC7427XJG-12. No explicit quantity-break price is printed in the confirmed catalog results, so the quote desk should return the current commercial terms for the exact MPN, package, tray quantity, and delivery schedule. Lifecycle and allocation can materially change lead time for this specialized switching IC.
Is the VSC7427XJG-12 in stock?
The current stock position should be confirmed through the Request a Quote form on this page. The catalog listing states that the VSC7427XJG-12 can be ordered and shipped, but it does not provide a reliable quantity count or a standardized stock promise that can be reused as a purchasing guarantee. The quote response should state available quantity, allocation status, and expected dispatch timing for the requested tray quantity.

داده‌های مرجع مهندسی برای VSC7427XJG-12 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose VSC7427XJG-12 when a network appliance needs 12 integrated Gigabit copper PHYs, 14 SerDes interfaces, and the confirmed 26-port VSC7427 switching architecture in a 672-HSBGA package. It is especially useful when minimizing external PHY count matters more than avoiding a complex BGA layout. Pair it with a VSC8512 or VSC8522 when all 26 switch ports must terminate copper Ethernet. Consider another same-family VSC7427 ordering variant only after comparing temperature grade, silicon revision, firmware, qualification, lifecycle, and ordering information. Do not select VSC7428XJG-02 solely because it uses a related package; its port count and SerDes architecture must be verified separately. For a lower-complexity design with fewer ports, a smaller Ethernet switch may reduce package size, routing effort, power, and assembly cost even though it would not provide the same integration level.

مقایسه با جایگزین‌ها

پارامتر این محصول VSC7427XJG-02 VSC7427XJG-03 VSC7427XJG-10
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 672-HSBGA (27x27) 672-HSBGA (27x27) 672-HSBGA (27x27) 672-HSBGA (27x27)
Total Ports 26 ports 26 ports 26 ports 26 ports
Integrated Copper PHY Ports 12 ports 12 ports 12 ports 12 ports
SerDes Interfaces 14 interfaces 14 interfaces 14 interfaces 14 interfaces
Switching Family SparX-III-26 SparX-III-26 SparX-III-26 SparX-III-26
Maximum Ethernet Rate 1000 Mb/s per copper port 1000 Mb/s per copper port 1000 Mb/s per copper port 1000 Mb/s per copper port
Technology 65 nm SimpliPHY 65 nm SimpliPHY 65 nm SimpliPHY 65 nm SimpliPHY

تفاوت‌های کلیدی

  • Twelve copper PHYs are integrated into the switching package (در مقابلVSC7427XJG-02)
  • A two-IC architecture can deliver 26 copper Ethernet ports (در مقابلVSC7427XJG-03)
  • Flexible SerDes expansion complements the integrated copper interfaces (در مقابلVSC7427XJG-10)

یادداشت‌های طراحی

Treat the 672-HSBGA as a high-density mixed-signal layout rather than a generic digital BGA. Follow the Microchip reference layout for all 26 switch interfaces and preserve the manufacturer-recommended ball-escape geometry. Place decoupling and power-distribution structures directly beneath the device, use multiple power and ground planes, and connect the exposed thermal and ground balls through dense via arrays. Confirm the final stackup, backdrill requirements, via diameters, and solder-mask land patterns with the package drawing.

SerDes routing and copper-PHY escape paths should be designed with controlled impedance and short return paths. Keep high-speed lanes away from noisy switching-power loops, provide continuous reference planes, and use the manufacturer's recommended via transitions and topology. The copper magnetics and line-driver network also require a controlled physical layout to limit insertion loss, crosstalk, and radiated emissions. Validate the complete channel with the manufacturer's compliance or characterization procedure rather than relying only on schematic connectivity.

Power density increases when many copper PHYs and SerDes lanes operate simultaneously, so thermal design must cover worst-case traffic rather than an idle condition. Use the family power tables to calculate dissipation for the configured port count, lane rates, PHY modes, and ambient temperature. Provide a broad copper heat-spreading area under the BGA and dense thermal vias, then verify junction-temperature margin with the package thermal model. Avoid placing temperature-sensitive magnetics or regulators immediately above the switch without an explicit thermal review.

Build the power tree from the manufacturer's rail requirements, including sequencing, tolerances, load currents, and any special SerDes or PHY supply conditions. Do not infer rail values from generic Ethernet-switch designs. Place bulk and high-frequency decoupling at the supply balls, use low-impedance power planes, and isolate switching regulators from sensitive PHY and SerDes sections. Confirm startup behavior in hardware because the integrated copper PHYs and external VSC8512 or VSC8522 must initialize in a controlled order.

A common design error is assuming that identical-looking VSC7427 suffix codes guarantee identical production behavior. Before substitution, compare temperature grade, silicon revision, firmware release, qualification status, lifecycle status, and the exact ordering-information table. Also avoid treating the VSC7428XJG-02 as an automatic substitute: its port architecture and configuration must be verified separately. A valid drop-in decision requires both the 672-HSBGA footprint and functional compatibility of clocks, SerDes lanes, management interfaces, and PHYs.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The confirmed product information does not state the compliance status of the exact VSC7427XJG-12 ordering code. Automotive qualification is not indicated; confirm any specialized qualification requirements directly from Microchip documentation.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

VSC7427XJG-12 datasheet VSC7427XJG-12 pinout VSC7427XJG-12 datasheet pdf VSC7427XJG-12 equivalent VSC7427XJG-12 replacement VSC7427XJG-12 672-HSBGA VSC7427XJG-12 price VSC7427XJG-12 stock Microchip VSC7427XJG-12 VSC7427 26 port Gigabit switch VSC7427XJG-12 application circuit VSC7427XJG-12 vs VSC7428XJG-02

قطعات و اصطلاحات مرتبط

Microchip Technology VSC7427XJG-12 VSC7427 VSC7427XJG-02 VSC7427XJG-03 VSC7427XJG-10 VSC8512 VSC8522 Ethernet switch Gigabit Ethernet Layer 2 switch 10/100/1000BASE-T copper PHY SerDes SparX-III-26 SimpliPHY 65 nm process 672-HSBGA BGA package family surface-mount technology industrial Ethernet telecom aggregation network appliance thermal vias signal integrity
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ