Microchip Technology

VSC7448YIH-01 - 52-Port 80G Ethernet Switch | Microchip

MPN: VSC7448YIH-01 ✓ सक्रिय
672-FCBGA, 27 x 27 mm Package 1G, 2.5G, and 10G Ethernet Speed
न्यूनतम ऑर्डर मात्रा: 1 |

VSC7448YIH-01 अवलोकन

Microchip Technology VSC7448YIH-01 is a SparX-IV-80 enterprise Ethernet switch with an 80G switching capacity and as many as 52 ports. The device supports a configurable combination of 1G, 2.5G, and 10G Ethernet links and is packaged in a 672-FCBGA measuring 27 x 27 mm. It also provides L2 and L3 switching, making it suitable for industrial Ethernet, telecom, enterprise access, aggregation, and stacking equipment.

An Ethernet switch is a network-semiconductor device that receives frames on multiple physical interfaces and forwards them between ports using Layer 2 addresses. A Layer 3 switch additionally performs routing functions, while a stackable switch supports coordinated operation across multiple devices. The VSC7448 belongs to Microchip's SparX-IV-80 family, combining high-density port configurations with 10G uplink capability in one integrated device.

The headline features of VSC7448YIH-01 include an 80G switching fabric, support for up to 52 Ethernet ports, and mixed 1G, 2.5G, and 10G port configurations. The 672-FCBGA package provides the dense physical interface required for a high-port-count switching ASIC. A distributor listing also identifies the part as a 52-port L2/L3 stackable Gigabit Ethernet switch with 10 Gbps links.

This device targets networking equipment that needs high aggregation capacity without distributing traffic across many external switching components. Its port mix can serve copper or fiber-facing access interfaces through suitable external PHYs, while 10G links support higher-bandwidth aggregation. Enterprise switching features, combined with Layer 3 operation, allow the device to serve in access, distribution, and selected core-adjacent designs rather than only simple unmanaged bridging.

Typical uses include industrial Ethernet switches, telecom access equipment, enterprise campus-edge systems, network appliances, and stacked LAN configurations. In these systems, the device can consolidate many lower-speed ports and provide high-speed uplinks. Designers should account for the large BGA thermal and routing requirements, validate the specific port map and protocol stack, and complete high-speed signal-integrity and power-integrity validation on the final board.

The most important design consideration is that a 672-ball BGA requires careful escape routing, multilayer PCB construction, controlled-reference-plane geometry, and adequate thermal design. The 27 x 27 mm package also makes system mechanical constraints significant. Use the manufacturer's evaluation guidance and device documentation when defining layer stack-up, power delivery, clocking, SerDes implementation, and connector or PHY placement.

This page consolidates the device's port and package characteristics with application guidance, comparison details, and actionable PCB considerations. It is intended to help networking engineers establish whether the VSC7448YIH-01 fits a specific 1G, 2.5G, or 10G industrial Ethernet architecture before beginning high-density BGA implementation.

के लिए ड्रॉप-इन विकल्प VSC7448YIH-01 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

VSC7448YIH-02

✅ ड्रॉप-इन
📦 672-FCBGA (27x27 mm)
Same documented 672-FCBGA (27 x 27 mm) package and Ethernet-switch family; the available listings do not quantify the -01 versus -02 functional difference.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

VSC7448YIH-01 Maximum Ratings और Electrical Characteristics

Device Type L2/L3 stackable Ethernet switch
Product Series SparX-IV-80
Maximum Switching Capacity 80 Gbps
Maximum Port Count 52 ports
Supported Ethernet Speeds 1G, 2.5G, and 10G Ethernet
Maximum Uplink Speed 10 Gbps
Layer 2 Support Supported
Layer 3 Support Supported
Stacking Support Supported
पैकेज 672-FCBGA, 27 x 27 mm
Ball Count 672 balls
Packaging Tray
ऑपरेटिंग तापमान -40 °C to 110 °C
इंटरफ़ेस PCI

VSC7448YIH-01 672-fcbga, 27 x 27 mm पिन कॉन्फ़िगरेशन गाइड

VSC7448YIH-01 (672-fcbga, 27 x 27 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

VSC7448YIH-01 के लिए 672-fcbga, 27 x 27 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: VSC7448YIH-01.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

VSC7448YIH-01 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Access Switch, Telecom Access and Aggregation, Enterprise Stackable LAN Switch, Network Appliance with Mixed-Speed Ports, Industrial Control and Automation Gateway, Data Center Top-of-Rack Platform.

🏭

Industrial Ethernet Access Switch

The VSC7448YIH-01 fits high-density industrial Ethernet access equipment because it combines up to 52 ports with an 80 Gbps switching fabric. A product can map lower-speed access interfaces across the switching array while retaining 10G links for equipment-to-equipment aggregation. Its stated -40 °C to 110 °C range also supports harsh industrial environments. The device is implemented as a central switching ASIC, with suitable external PHYs handling physical-layer connectivity and the board providing power delivery, clocking, and high-speed escape routing. The principal engineering trade-off is PCB complexity: a 672-FCBGA requires a dense multilayer design, careful SerDes signal integrity, and a thermal strategy suitable for sustained traffic across many ports.

🌐

Telecom Access and Aggregation

The VSC7448YIH-01 is suitable for telecom access and aggregation systems requiring dense Ethernet port concentration and high-speed uplinks. Its support for a combination of 1G, 2.5G, and 10G links allows service equipment to connect multiple subscriber or service-facing interfaces to a shared 80G switching fabric. Layer 3 switching features can support managed routing at the edge of the network, while stacking enables expansion across multiple chassis. The main implementation challenge is signal and power integrity around the 672-ball BGA. Designers should establish a multilayer stack-up, use continuous reference planes where appropriate, control high-speed differential impedance, and provide independent power filtering close to the device.

🖥️

Enterprise Stackable LAN Switch

The VSC7448YIH-01 can serve as the switching core of an enterprise stackable LAN product because it combines L2 and L3 forwarding with as many as 52 ports. The 80G fabric provides aggregation capacity for many 1G access ports, while 2.5G and 10G options accommodate server-facing and backbone connections. Stacking support allows multiple switching units to operate as a coordinated system, reducing the need for separate routing devices in selected topologies. For a compact enterprise platform, the 672-FCBGA footprint demands careful escape-routing density and substantial thermal copper. The system should also include hardware support for management, synchronization, and failover according to the manufacturer's device and software documentation.

🔧

Network Appliance with Mixed-Speed Ports

The VSC7448YIH-01 supports network appliances that need flexible combinations of 1G, 2.5G, and 10G connectivity rather than a uniform port arrangement. Up to 52 ports provide high density, while the 80G switching fabric can support simultaneous traffic across access and aggregation links. This makes the device relevant to industrial gateways, edge appliances, and secure network products that must bridge legacy 1G devices while adding 2.5G or 10G backhaul. Design work should begin with a precise port-allocation matrix and validated SerDes lane configuration. PCB complexity is substantial because the 27 x 27 mm 672-FCBGA demands dense escape routing, strict impedance control, and power planes capable of handling dynamic switching loads.

🏭

Industrial Control and Automation Gateway

The VSC7448YIH-01 can anchor an industrial control or automation gateway that combines numerous machine-facing Ethernet links with higher-speed plant or backhaul connections. Its 1G options suit standard industrial Ethernet, while 2.5G and 10G links support data aggregation, vision, and line-side uplinks. The stated -40 °C to 110 °C operating range aligns with many demanding industrial environments. As a central L2/L3 switching element, it reduces the number of discrete switching blocks needed in the gateway. Thermal and reliability work should account for continuous traffic, enclosure temperature rise, and the BGA's solder-joint requirements. For functional safety projects, verify AEC-Q100 status separately because that qualification is not established by the available product information.

🖥️

Data Center Top-of-Rack Platform

The VSC7448YIH-01 can be evaluated for a data-center top-of-rack platform requiring many access ports and high-speed server-facing links. Up to 52 ports provide physical density, while 10G connectivity supports server aggregation and 80G switching capacity can serve multiple traffic classes. Layer 3 switching and stacking make it possible to consolidate edge switching functions in a compact system. The principal limitation is implementation rather than headline port count: a 672-FCBGA in a 27 x 27 mm package requires sophisticated multilayer PCB engineering, high-speed clock and SerDes validation, and careful thermal design. Before adoption, verify which of the mixed-speed configurations, management features, and stacking profiles are enabled in the exact ordering code and firmware release.

What is the VSC7448YIH-01?
The VSC7448YIH-01 is a Microchip Technology SparX-IV-80 enterprise Ethernet switch with an 80 Gbps switching fabric and support for as many as 52 ports. According to the manufacturer product page, it supports combinations of 1G, 2.5G, and 10G Ethernet and provides L2 and L3 switching features. It is packaged in a 672-FCBGA measuring 27 x 27 mm.
How many Ethernet ports can the VSC7448YIH-01 support?
The VSC7448YIH-01 supports up to 52 Ethernet ports, with the realized configuration determined by the selected 1G, 2.5G, and 10G interfaces. Microchip describes the device as an 80G SparX-IV-80 industrial Ethernet switch, while distributor listings identify it as a 52-port L2/L3 stackable Gigabit Ethernet switch with 10 Gbps links.
What Ethernet speeds are supported by the VSC7448YIH-01?
The VSC7448YIH-01 supports 1G, 2.5G, and 10G Ethernet configurations. This mixed-speed capability lets an equipment designer combine access-facing ports with high-bandwidth aggregation or uplink links in one switching device. The maximum switching capacity is 80 Gbps, according to the Microchip VSC7448 product page.
Where can I download the VSC7448YIH-01 datasheet PDF?
The VSC7448YIH-01 datasheet should be obtained from Microchip's product and device-documentation resources. The relevant family document is VMDS-10498_VSC7442-02_VSC7444-02_VSC7448-02_VSC7449-02.pdf, which covers the VSC7448-02 family documentation. Use the pin-description table and reference-design material in that document before assigning board-level connections.
Where can I find the VSC7448YIH-01 pinout?
The complete VSC7448YIH-01 pinout must be taken from the manufacturer datasheet because the device uses a 672-FCBGA package. The package is 27 x 27 mm, and its numerous signal, power, ground, configuration, and reserved balls cannot be reproduced reliably from a listing summary. Use the pin-description table in the Microchip device document when assigning PCB tracks and ball-map implementation details.
What package and operating temperature does the VSC7448YIH-01 use?
The VSC7448YIH-01 uses a 672-FCBGA package measuring 27 x 27 mm, supplied in a tray. Its stated operating-temperature range is -40 °C to 110 °C. The large BGA and wide temperature range make thermal analysis, controlled impedance routing, and careful component selection important in industrial networking equipment.
Is the VSC7448YIH-01 suitable for industrial Ethernet equipment?
Yes, the VSC7448YIH-01 is positioned for industrial and enterprise Ethernet switching because it combines an 80 Gbps fabric with up to 52 ports and a stated -40 °C to 110 °C operating range. Its 1G, 2.5G, and 10G options also suit mixed-speed access and aggregation designs. Final suitability still depends on port mapping, thermal performance, protocol support, and board-level validation.
VSC7448YIH-01 vs VSC7448YIH-02 - which is the better choice?
VSC7448YIH-02 is the closest documented drop-in candidate for VSC7448YIH-01, and both are listed as 672-FCBGA devices in the 27 x 27 mm package. The available manufacturer and distributor snippets do not expose the -01 and -02 configuration differences, so engineers should verify revision, firmware, protocol, and ordering-code requirements before substitution. The two listings cannot be treated as fully interchangeable without a detailed device comparison.
When should I choose VSC7448YIH-01 over VSC7448YIH-02?
Choose VSC7448YIH-01 when it matches an approved bill of materials, an existing reference design, or a product configuration that has already passed system qualification. The VSC7448YIH-02 has the same documented package size and is the closest web-identified alternative, but the available material does not quantify the functional difference. Firmware, hardware revision, feature set, and qualification status should drive the final selection.
What can replace the VSC7448YIH-01?
The VSC7448YIH-02 is the only specifically identified same-package drop-in candidate in the available cross-reference results. Both parts are listed as 672-FCBGA Ethernet switches in a 27 x 27 mm package. No verified cross-brand pin-compatible replacement was found, so a substitution involving another manufacturer should not be assumed without a complete pin, firmware, electrical, and thermal equivalence review.
What is the best drop-in replacement for VSC7448YIH-01?
VSC7448YIH-02 is the best documented replacement candidate because it is the same 672-FCBGA, 27 x 27 mm Ethernet-switch package and appears as an exact suffix variant in the cross-reference results. The available information does not establish whether its -01 and -02 revisions are functionally identical. Confirm device revision, boot configuration, firmware compatibility, and qualification before production use.
Where can I buy the VSC7448YIH-01 online?
Use the Request a Quote form on this page to request VSC7448YIH-01 availability, commercial terms, and current lead time. The device is a tray-packaged, high-value networking IC, so allocation and delivery schedules may depend on the exact ordering code and quantity. Submit the target MPN VSC7448YIH-01 with the required quantity and destination for an actionable quotation.
What is the price of the VSC7448YIH-01?
Current commercial pricing for the VSC7448YIH-01 should be obtained through the Request a Quote form on this page. The part is a specialized 52-port 80G Ethernet-switch ASIC in a 672-FCBGA package, and its commercial terms may vary with volume, delivery schedule, and allocation. The structured pricing area is designed to show the most current quote information.
What is the lead time for the VSC7448YIH-01?
Request the current VSC7448YIH-01 lead time through the Request a Quote form on this page. A distributor snippet states that the device is stocked in trays, but no dated manufacturer lead-time commitment is established for this exact MPN. Include your production schedule and required quantity so the quotation can reflect an appropriate delivery plan.
Is the VSC7448YIH-01 in stock?
A distributor listing states that 1,000 units of VSC7448YIH-01 were in stock and identifies tray packaging, but availability can change quickly. Use the Request a Quote form on this page for confirmation of current stock, allocation, and delivery timing. The manufacturer product page also remains the authoritative reference for device lifecycle and ordering information.
What are the key specifications of VSC7448YIH-01 that engineers should know?
The key specifications are an 80 Gbps switching capacity, support for up to 52 ports, mixed 1G, 2.5G, and 10G Ethernet, L2/L3 switching, stacking support, and a 672-FCBGA package measuring 27 x 27 mm. The stated operating range is -40 °C to 110 °C. These figures position the device for high-density industrial, telecom, and enterprise network equipment.

के लिए इंजीनियरिंग संदर्भ डेटा VSC7448YIH-01 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose VSC7448YIH-01 when the design requires a high-density Ethernet-switch ASIC with an 80 Gbps fabric, as many as 52 ports, mixed 1G, 2.5G, and 10G links, and a stated -40 °C to 110 °C range. It is a strong fit for industrial Ethernet, telecom access, enterprise switching, and mixed-speed network appliances. VSC7448YIH-02 is the closest documented same-package alternative because both use the 672-FCBGA (27 x 27 mm) format, but the available material does not establish whether it preserves the exact port map, features, firmware behavior, or qualification. Use VSC7448YIH-01 when it is the approved configuration in the bill of materials or reference platform. Consider VSC7448YIH-02 only after a manufacturer-level comparison confirms pin, electrical, firmware, and lifecycle compatibility. No verified cross-brand drop-in replacement is identified, so another manufacturer's switch should not be treated as a drop-in solution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद VSC7448YIH-02
Brand Microchip Technology Microchip Technology
Package 672-FCBGA (27 x 27 mm) 672-FCBGA (27 x 27 mm)
Device Type L2/L3 stackable Ethernet switch Telecom IC Ethernet switch
Product Family SparX-IV-80 VSC7448 family

मुख्य विशेषताएँ

  • High switching capacity in a single dense port device (बनामVSC7448YIH-02)
  • Mixed 1G, 2.5G, and 10G port support (बनामVSC7448YIH-02)
  • Defined industrial temperature range (बनामVSC7448YIH-02)

डिज़ाइन नोट्स

Plan the PCB as a high-density multilayer design around the 672-FCBGA. Establish a stack-up that supports short BGA escape routing, continuous reference planes, controlled differential impedance, and adequate power-plane distribution. Follow the manufacturer's pad, via, and land-pattern guidance exactly; do not derive a 672-ball footprint from a generic BGA library. Validate every escape segment with the final stack-up and manufacturing rules.

Route all 10G and 2.5G SerDes links as controlled-impedance differential pairs with continuous reference planes and minimal stubs. Validate insertion loss, return loss, crosstalk, jitter, and lane-to-lane skew against the device requirements. Pay particular attention to connector or PHY escapes from the BGA because their transitions can dominate channel performance even when the internal traces are short.

Use a dedicated, low-impedance power-distribution architecture for the switching ASIC and isolate each supply domain with appropriate filtering close to the device. Place bulk and high-frequency decoupling according to the manufacturer power-distribution guidance, then check voltage droop under maximum port activity. Thermal and power simulations should use realistic traffic profiles because simultaneous line-rate activity can create a substantially different load than an idle bench test.

Treat the 27 x 27 mm BGA as a major heat source and provide copper spreading beneath and around the package while maintaining required electrical clearances. Base thermal conclusions on the actual enclosure, airflow, substrate, and adjacent heat sources. Validate junction-temperature margins at the maximum -40 °C to 110 °C ambient boundary, and verify solder-joint reliability through appropriate assembly and thermal-cycling procedures.

Do not assume that two devices with the same 672-FCBGA outline are functionally drop-in replacements. Confirm the exact ordering code, device revision, port map, supported clocking, boot configuration, firmware, and qualification requirements. In particular, validate VSC7448YIH-01 versus VSC7448YIH-02 against the manufacturer documentation before using the -02 part in an approved VSC7448YIH-01 design.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product and distributor information does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact VSC7448YIH-01 ordering code. Verify these requirements with Microchip before production release.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

VSC7448YIH-01 VSC7448YIH-01 datasheet VSC7448YIH-01 pinout VSC7448YIH-01 datasheet pdf Microchip VSC7448YIH-01 VSC7448YIH-01 80G switch VSC7448YIH-01 52 port Ethernet switch VSC7448YIH-01 672 FCBGA VSC7448YIH-01 replacement VSC7448YIH-01 vs VSC7448YIH-02 VSC7448YIH-01 industrial Ethernet switch VSC7448YIH-01 price VSC7448YIH-01 stock VSC7448YIH-01 footprint SparX-IV-80 Ethernet switch

संबंधित कंपोनेंट्स और शब्द

Microchip Technology VSC7448YIH-01 VSC7448YIH-02 SparX-IV-80 Ethernet switch enterprise Ethernet industrial Ethernet telecom access network interface controller L2 switching L3 switching stackable switch 80 Gbps switching capacity 1G Ethernet 2.5G Ethernet 10G Ethernet SerDes PCI interface 672-FCBGA BGA package surface mount industrial control network appliance enterprise LAN signal integrity
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें