Microchip Technology

VSC8248YJH-01 - 11.3 Gbps Quad CDR | Microchip Technology

MPN: VSC8248YJH-01 ✓ सक्रिय
YJH Package
न्यूनतम ऑर्डर मात्रा: 1 |

VSC8248YJH-01 अवलोकन

The Microchip Technology VSC8248YJH-01 is a quad-channel clock and data recovery (CDR) integrated circuit designed for 8.5 Gbps to 11.3 Gbps high-speed serial links. The device includes clock and data recovery with error detection and correction (EDC) for XFI-to-XFI+ conversion and is supplied in an orderable package identified by the YJH designator.

A CDR is a high-speed line interface component that recovers a serial bit stream and its associated clock from a waveform that may have accumulated timing distortion, noise, and jitter during transmission. Positioned within clock and timing integrated circuits, the VSC8248 family supports network equipment operating at 10 Gb/s class line rates. Multiple recovered channels allow one device to serve interfaces that require parallel clock-and-data recovery rather than a single-lane retimer.

The VSC8248 supports data rates from 8.5 Gbps through 11.3 Gbps. This range covers 1.25 Gb/s Ethernet, 2 Gb/s and 4 Gb/s Fibre Channel, and 2.5 Gb/s and 5 Gb/s InfiniBand applications identified in the product documentation. At the upper operating region, its 11.3 Gbps capability supports modern 10 Gb/s networking and related optical or copper transport systems without requiring a separate recovery function for each lane.

The principal feature set includes four CDR channels, XFI-to-XFI+ conversion, and EDC capability. XFI provides a wide parallel data interface for transmitting serialized high-speed data, while XFI+ includes clock-forwarding information. Supporting conversion between these interface forms allows a system to bridge legacy XFI connections to newer XFI+ endpoints while recovering the transmitted clock. EDC helps correct transmission errors that may occur in the physical link.

Typical deployments include 10 Gb/s Ethernet switching equipment, Fibre Channel systems, InfiniBand adapters, optical network terminals, and network interface cards. The multi-lane architecture can reduce component count in quad-port designs while centralizing clock recovery, error correction, and interface conversion. Its multi-gigabit data-rate range makes it suitable for equipment designs that must bridge protocol or physical-layer variations while maintaining a common high-speed fabric.

For layout and implementation, preserve controlled-length and impedance-continuous high-speed connections, provide compliant termination and decoupling, and follow the manufacturer’s recommended reference design. Differential and high-speed clock/data paths require short return paths and careful isolation from noisy power converters. Confirm the exact YJH package dimensions, exposed-pad arrangement, pin assignments, and thermal limits against the manufacturer datasheet before releasing PCB artwork.

This page combines the manufacturer product information with a practical view of protocol applications, interface considerations, sourcing options, and validated drop-in alternatives. It is intended to help engineers identify whether the VSC8248YJH-01 matches a high-speed recovery requirement before beginning board-level implementation.

के लिए ड्रॉप-इन विकल्प VSC8248YJH-01 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं VSC8248YJH-01 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type.

Microchip Technology
Product Type: Ethernet clock and data recovery IC
इसके साथ तुलना करें VSC8248YJH-01 →

VSC8248YJH-02

✅ ड्रॉप-इन
Microchip Technology
📦 17 x 17 mm BGA
Ethernet clock and data recovery IC · 4 ports · 4 outputs · 8.5 Gbps · 11.3 Gbps · SFI · XFI · Integrated EDC

कीमत के लिए संपर्क करें

डेटाशीट देखें →

VSC8248YJH-01 विशेषताएं

Product Type Quad-channel clock and data recovery integrated circuit
Manufacturer Microchip Technology
Minimum Data Rate 8.5 Gbps
Maximum Data Rate 11.3 Gbps
Channel Count 4 channels
Supported Interface Conversion XFI to XFI+
Error Handling EDC (error detection and correction)
Supported 1.25 Gb/s Ethernet 1.25 Gbps
Supported Fibre Channel Rates 2 Gbps and 4 Gbps
Supported InfiniBand Rates 2.5 Gbps and 5 Gbps
Nominal Network Class 10 Gb/s
Package Designator YJH
माउंटिंग प्रकार Surface mount
Lead-Free Status Pb-free

VSC8248YJH-01 yjh पिन कॉन्फ़िगरेशन गाइड

VSC8248YJH-01 (yjh पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

VSC8248YJH-01 के लिए yjh पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: VSC8248YJH-01.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

VSC8248YJH-01 के लिए उपयुक्त है 6 अनुप्रयोगs: 10 Gb/s Ethernet Switching, Fibre Channel Edge Equipment, InfiniBand Network Adapters, Optical Network Terminals, Server Network Interface Cards, High-Speed Test Equipment.

🌐

10 Gb/s Ethernet Switching

The VSC8248YJH-01 fits quad-port 10 Gb/s Ethernet switch designs because it combines four clock-and-data-recovery channels with operation from 8.5 Gbps to 11.3 Gbps. Its XFI-to-XFI+ capability allows legacy XFI-facing logic to connect to newer clock-forwarding interfaces, while EDC addresses errors in the recovered link. In a line-card design, the device can sit between high-speed serial front ends and the switching fabric, reducing the number of separate recovery components. Board implementation should preserve controlled differential and parallel-interface impedance, minimize clock jitter-sensitive routing, and follow the manufacturer reference circuit for termination, supply decoupling, and exposed-pad thermal management.

🖥️

Fibre Channel Edge Equipment

The VSC8248YJH-01 is applicable to Fibre Channel equipment operating at 2 Gbps or 4 Gbps and to aggregate links operating within its 8.5 Gbps to 11.3 Gbps range. Four recovered channels can support a concentrated interface arrangement in edge appliances, storage gateways, or switching platforms. Clock recovery is essential when the transmitter and receiver do not share a low-jitter source, while EDC helps maintain link integrity in demanding equipment. The implementation should separate recovery-clock routing from noisy data paths, provide the required reference-clock quality, and use the manufacturer-defined interface termination and decoupling values. Confirm channel-to-channel skew and operating margins against the device documentation before production release.

🖥️

InfiniBand Network Adapters

The VSC8248YJH-01 supports network adapter and switching designs that use 2.5 Gbps or 5 Gbps InfiniBand links within the broader 8.5 Gbps to 11.3 Gbps operating range. Its quad-channel architecture can consolidate clock recovery across multiple high-speed ports, while XFI-to-XFI+ conversion supports transitions between interface implementations. This is useful in denser adapters where component count, power, and routing complexity must be controlled. Designers should use short controlled-impedance routes for high-speed data and clocks, maintain continuous ground references, and separate the recovered-clock domain from switching regulators. Validate the reference clock, power sequencing, termination, and channel timing against the manufacturer application guidance before fabrication.

🌐

Optical Network Terminals

The VSC8248YJH-01 fits optical network terminal backplanes where several recovered high-speed lanes terminate at a common data-processing fabric. Its 11.3 Gbps maximum rate supports 10 Gb/s-class service links, and the four-channel arrangement reduces the footprint required for parallel recovery functions. XFI-to-XFI+ conversion can bridge different network-processing interfaces, while EDC improves link robustness. In an optical terminal, place the CDR close to the host interface when practical to limit high-speed trace length, use the recommended termination network, and maintain continuous return paths beneath data and clock lanes. Validate thermal performance and power sequencing across the complete optical-module and line-card power domains.

🖥️

Server Network Interface Cards

The VSC8248YJH-01 can support multi-port server network interface cards where a common high-speed interface must recover both data and clock. Four channels allow a card to serve multiple 10 Gb/s-class ports while sharing one timing-device package, provided all lanes operate within the 8.5 Gbps to 11.3 Gbps range. XFI-to-XFI+ conversion supports interface transitions in newer adapters, and EDC assists recovery in long or noisy board-level channels. Layout should minimize skew between wide parallel data buses and their associated clocking, provide clean reference-clock distribution, and isolate high-speed return currents from processor and memory power systems. Confirm host-facing logic levels and connector-channel mapping in the system design.

🔧

High-Speed Test Equipment

The VSC8248YJH-01 can be used in high-speed line-card and test equipment that accepts recovered 10 Gb/s-class signals. Its four recovery channels and broad 8.5 Gbps to 11.3 Gbps range allow a common timing architecture to handle multiple rates, while XFI-to-XFI+ conversion can simplify instrumentation around legacy and newer host interfaces. EDC is valuable when the recovered stream is monitored for link errors. Instrument designers should establish a low-jitter reference clock, use controlled-impedance routing with uninterrupted return paths, and keep recovered clocks away from switching-node noise. Validate each supported protocol’s timing, reset, and fault-reporting behavior against the manufacturer documentation before automating production tests.

What is the VSC8248YJH-01?
The VSC8248YJH-01 is a Microchip Technology quad-channel clock and data recovery integrated circuit for serial links operating from 8.5 Gbps to 11.3 Gbps. According to the Microchip Technology VSC8248 product page and its product documentation, it provides XFI-to-XFI+ conversion and error detection and correction, making it appropriate for multi-lane 10 Gb/s networking equipment.
What data rates does the VSC8248YJH-01 support?
The VSC8248YJH-01 supports data rates from 8.5 Gbps to 11.3 Gbps. According to the Microchip Technology product information, this range includes 1.25 Gb/s Ethernet, 2 Gbps and 4 Gbps Fibre Channel, and 2.5 Gbps and 5 Gbps InfiniBand. The upper limit accommodates 10 Gb/s-class serial interfaces.
What is the difference between XFI and XFI+?
XFI is the wide parallel interface commonly used for 10 Gb/s serial links, while XFI+ adds clock-forwarding information to the parallel data interface. According to the Microchip Technology VSC8248 product information, the VSC8248YJH-01 supports XFI-to-XFI+ conversion while recovering the transmitted clock and applying EDC.
How many independent CDR channels does the VSC8248YJH-01 provide?
The VSC8248YJH-01 provides four clock-and-data-recovery channels. According to the Microchip Technology VSC8248 documentation, the quad-channel configuration suits multi-port network equipment and allows a design to consolidate recovery, interface conversion, and error-correction functions into one high-speed timing IC.
Where can I download the VSC8248YJH-01 datasheet PDF?
The official VSC8248YJH-01 datasheet PDF is available through the Microchip Technology VSC8248 product page at https://www.microchip.com/en-us/product/VSC8248. Use the datasheet and package drawings on that page to verify the YJH pin assignments, dimensions, recommended circuitry, absolute maximum ratings, and operating limits before PCB release.
Where can I find the VSC8248YJH-01 pinout?
The VSC8248YJH-01 pinout is identified by the YJH package in the manufacturer datasheet linked from the official Microchip Technology VSC8248 page. Use the package drawing and pin-description table when assigning signal names; the manufacturer also offers a confidential MicroCHECK design review for projects using the device.
Is the VSC8248YJH-01 suitable for 10 Gb/s Ethernet equipment?
The VSC8248YJH-01 is suitable for 10 Gb/s Ethernet equipment because it supports line rates up to 11.3 Gbps and XFI-to-XFI+ conversion. According to the Microchip Technology product information, the device also supports 1.25 Gb/s Ethernet, while its four-channel architecture can serve quad-port switches and interface aggregation designs.
Can the VSC8248YJH-01 be used in Fibre Channel and InfiniBand systems?
The VSC8248YJH-01 can be used in Fibre Channel and InfiniBand systems that fall within its supported rate range. According to the Microchip Technology VSC8248 documentation, it supports 2 Gbps and 4 Gbps Fibre Channel and 2.5 Gbps and 5 Gbps InfiniBand while operating across an overall 8.5 Gbps to 11.3 Gbps range.
What should I check before designing with the VSC8248YJH-01?
Check the supply requirements, reference clock requirements, supported interface modes, package drawings, and channel timing specifications in the manufacturer datasheet before designing with the VSC8248YJH-01. The 11.3 Gbps maximum data rate also requires controlled PCB impedances, short high-speed routes, appropriate return paths, and compliant power and clock-decoupling networks.
Where can I buy the VSC8248YJH-01 online?
The VSC8248YJH-01 can be requested through the Request a Quote form on this page, where the current commercial terms and delivery schedule can be confirmed. The manufacturer product page is https://www.microchip.com/en-us/product/VSC8248. A component listing alone does not guarantee current stock, so request a written quotation before committing the device to a production build.
What is the price of the VSC8248YJH-01?
The current price of the VSC8248YJH-01 should be confirmed through the Request a Quote form on this page because pricing depends on order quantity, packaging, lead time, and market conditions. Submit the required quantity and target delivery location, then use the returned quotation for budgeting rather than relying on a static price or an incomplete market listing.
What is the lead time for the VSC8248YJH-01?
The current lead time for the VSC8248YJH-01 should be requested through the Request a Quote form on this page. Include the required quantity, shipment destination, and production schedule when requesting the quotation. This avoids treating a distributor inventory indication as a guaranteed allocation for a complete manufacturing order.
Is the VSC8248YJH-01 in stock?
Stock for the VSC8248YJH-01 is confirmed through the Request a Quote form on this page. Current inventory can vary by package, quantity, and order date, so request an allocation for the complete quantity you need. The form provides a direct way to obtain current availability and the corresponding delivery schedule.
What is the best drop-in replacement for the VSC8248YJH-01?
A drop-in replacement should be selected only after confirming identical YJH package dimensions, pin assignments, supply requirements, clocking, data-rate limits, and interface functions. According to the Microchip Technology VSC8248 product information, the target is a four-channel 8.5 Gbps to 11.3 Gbps CDR with XFI-to-XFI+ conversion and EDC; any alternative must match those functional requirements as well as its footprint.
Can another VSC8248 device replace the VSC8248YJH-01?
Another VSC8248-family device should be used only when its complete orderable suffix confirms package, temperature, lead-time, and lifecycle equivalence. According to the Microchip Technology product documentation, the VSC8248 family provides the required quad-channel CDR, 8.5 Gbps to 11.3 Gbps range, XFI-to-XFI+ conversion, and EDC. Review the manufacturer’s ordering information before treating a family member as interchangeable.
VSC8248YJH-01 versus other quad-channel CDRs: which is better for a 10 Gb/s switch?
The VSC8248YJH-01 is a strong candidate for a 10 Gb/s switch when the design requires four channels, XFI-to-XFI+ conversion, EDC, and operation up to 11.3 Gbps. According to the Microchip Technology VSC8248 documentation, the alternative must reproduce the complete YJH pinout and provide equivalent clock-recovery and error-correction behavior, not merely offer a similar data-rate headline.
When should I choose the VSC8248YJH-01 instead of a single-channel retimer?
Choose the VSC8248YJH-01 when the system needs four recovered channels and XFI-to-XFI+ conversion within one device. According to the Microchip Technology VSC8248 product information, its 8.5 Gbps to 11.3 Gbps operating range and EDC support suit 10 Gb/s Ethernet, Fibre Channel, and InfiniBand designs, whereas a single-channel retimer may be more appropriate when only one lane requires recovery.
What are the key specifications of the VSC8248YJH-01 that engineers should know?
The key VSC8248YJH-01 specifications are four clock-and-data-recovery channels, an 8.5 Gbps minimum data rate, an 11.3 Gbps maximum data rate, XFI-to-XFI+ conversion, and EDC capability. According to the Microchip Technology VSC8248 product information, the device also supports 1.25 Gb/s Ethernet, 2 Gbps and 4 Gbps Fibre Channel, and 2.5 Gbps and 5 Gbps InfiniBand.
Is the VSC8248YJH-01 RoHS compliant and suitable for lead-free assembly?
The VSC8248YJH-01 is identified as Pb-free by the product listing, but its formal RoHS and REACH declarations should be checked in the manufacturer’s material-declaration records for the exact orderable suffix. The manufacturer product page is https://www.microchip.com/en-us/product/VSC8248. RoHS, REACH, AEC-Q100, and halogen-free status are not confirmed by the available product information.

के लिए इंजीनियरिंग संदर्भ डेटा VSC8248YJH-01 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the VSC8248YJH-01 for a multi-port, 10 Gb/s-class design that requires four recovered channels, XFI-to-XFI+ conversion, and EDC. Its 8.5 Gbps to 11.3 Gbps range covers the listed Ethernet, Fibre Channel, and InfiniBand use cases while allowing one timing architecture to serve several line-card formats. A single-channel retimer is preferable when only one lane needs clock recovery or when its lower channel count better matches a very compact design. Before approving an alternative to the VSC8248YJH-01, verify the complete YJH footprint, pin assignments, clocking requirements, supply rails, error handling, and supported data rates. Also confirm whether the system needs the conversion function or can use a simpler recovery-only arrangement. For production sourcing, request current availability and delivery terms through the Request a Quote form rather than assuming that a family listing guarantees inventory.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package YJH package
Brand Microchip Technology
Device Type Quad-channel clock and data recovery IC
Minimum Data Rate 8.5 Gbps
Maximum Data Rate 11.3 Gbps
Channel Count 4 channels
Interface Conversion XFI to XFI+
Error Handling EDC
Ethernet Support 1.25 Gbps Ethernet
Fibre Channel Support 2 Gbps and 4 Gbps
InfiniBand Support 2.5 Gbps and 5 Gbps

मुख्य विशेषताएँ

  • Four recovery channels in one timing IC (बनामSingle-channel retimer alternatives)
  • Native XFI-to-XFI+ conversion (बनामCDRs limited to one interface form)
  • Broad 10 Gb/s-class operating range (बनामLower-rate single-purpose clock recovery devices)

डिज़ाइन नोट्स

Route the high-speed serial and wide parallel interfaces as controlled-impedance nets with continuous reference planes and no unnecessary layer transitions. Keep recovered-clock traces away from switching regulators and high-current return paths. Match interface lengths where the manufacturer specifies timing or skew limits, and place termination networks close to the relevant driver or receiver so that reflections are controlled before the signal reaches the next device.

Apply the manufacturer’s recommended voltage rails, decoupling, and power-up sequence to every power pin. Place the required capacitors close to the corresponding device pins and provide a low-impedance path from the ground terminals to the exposed thermal pad if the YJH package includes one. Confirm the actual pin names, voltage tolerances, and maximum current limits in the datasheet before assigning rails or enabling the device.

Do not treat the VSC8248 family name as proof that every ordering suffix is interchangeable. Confirm the complete VSC8248YJH-01 order code against the YJH package drawing, pin table, temperature range, lifecycle status, and lead-time options. A substitution must preserve the 8.5 Gbps to 11.3 Gbps range, four-channel architecture, XFI-to-XFI+ conversion, EDC behavior, electrical limits, and pin-to-pin connectivity.

Clock and data recovery performance depends on reference-clock quality as well as channel layout. Use a low-jitter reference source, preserve recommended clock impedance, and isolate the clock network from digital switching noise. During validation, examine recovered-clock quality, eye behavior, channel skew, and link-error counters across temperature and supply corners rather than relying only on nominal link enumeration.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The product listing identifies the VSC8248YJH-01 as Pb-free. Formal RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations for the exact orderable suffix are not stated and remain unknown.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

VSC8248YJH-01 datasheet VSC8248YJH-01 pinout VSC8248YJH-01 datasheet pdf VSC8248YJH-01 equivalent VSC8248YJH-01 replacement VSC8248YJH-01 cross reference VSC8248YJH-01 price VSC8248YJH-01 stock VSC8248YJH-01 schematic Microchip VSC8248YJH-01 VSC8248YJH-01 YJH package VSC8248YJH-01 11.3 Gbps CDR VSC8248YJH-01 XFI XFI+ VSC8248YJH-01 10GbE switch VSC8248YJH-01 vs quad channel retimer

संबंधित कंपोनेंट्स और शब्द

Microchip Technology VSC8248 VSC8248YJH-01 Microsemi clock and data recovery CDR quad-channel CDR clock and timing IC XFI XFI+ EDC error detection and correction 10 Gb/s Ethernet Fibre Channel InfiniBand 10 Gb/s 8.5 Gbps 11.3 Gbps YJH package surface mount clock recovery reference clock signal integrity semiconductor Pb-free
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें