VSC8248YJH-01 - 11.3 Gbps Quad CDR | Microchip Technology
MPN: VSC8248YJH-01 ✓ فعالVSC8248YJH-01 نمای کلی
A CDR is a high-speed line interface component that recovers a serial bit stream and its associated clock from a waveform that may have accumulated timing distortion, noise, and jitter during transmission. Positioned within clock and timing integrated circuits, the VSC8248 family supports network equipment operating at 10 Gb/s class line rates. Multiple recovered channels allow one device to serve interfaces that require parallel clock-and-data recovery rather than a single-lane retimer.
The VSC8248 supports data rates from 8.5 Gbps through 11.3 Gbps. This range covers 1.25 Gb/s Ethernet, 2 Gb/s and 4 Gb/s Fibre Channel, and 2.5 Gb/s and 5 Gb/s InfiniBand applications identified in the product documentation. At the upper operating region, its 11.3 Gbps capability supports modern 10 Gb/s networking and related optical or copper transport systems without requiring a separate recovery function for each lane.
The principal feature set includes four CDR channels, XFI-to-XFI+ conversion, and EDC capability. XFI provides a wide parallel data interface for transmitting serialized high-speed data, while XFI+ includes clock-forwarding information. Supporting conversion between these interface forms allows a system to bridge legacy XFI connections to newer XFI+ endpoints while recovering the transmitted clock. EDC helps correct transmission errors that may occur in the physical link.
Typical deployments include 10 Gb/s Ethernet switching equipment, Fibre Channel systems, InfiniBand adapters, optical network terminals, and network interface cards. The multi-lane architecture can reduce component count in quad-port designs while centralizing clock recovery, error correction, and interface conversion. Its multi-gigabit data-rate range makes it suitable for equipment designs that must bridge protocol or physical-layer variations while maintaining a common high-speed fabric.
For layout and implementation, preserve controlled-length and impedance-continuous high-speed connections, provide compliant termination and decoupling, and follow the manufacturer’s recommended reference design. Differential and high-speed clock/data paths require short return paths and careful isolation from noisy power converters. Confirm the exact YJH package dimensions, exposed-pad arrangement, pin assignments, and thermal limits against the manufacturer datasheet before releasing PCB artwork.
This page combines the manufacturer product information with a practical view of protocol applications, interface considerations, sourcing options, and validated drop-in alternatives. It is intended to help engineers identify whether the VSC8248YJH-01 matches a high-speed recovery requirement before beginning board-level implementation.
جایگزینهای drop-in برای VSC8248YJH-01 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای VSC8248YJH-01 (همان فرمفاکتور و فوتپرینت) — متفاوت در Product Type.
VSC8248YJH-02
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←VSC8248YJH-01 مشخصات
| Product Type | Quad-channel clock and data recovery integrated circuit |
| Manufacturer | Microchip Technology |
| Minimum Data Rate | 8.5 Gbps |
| Maximum Data Rate | 11.3 Gbps |
| Channel Count | 4 channels |
| Supported Interface Conversion | XFI to XFI+ |
| Error Handling | EDC (error detection and correction) |
| Supported 1.25 Gb/s Ethernet | 1.25 Gbps |
| Supported Fibre Channel Rates | 2 Gbps and 4 Gbps |
| Supported InfiniBand Rates | 2.5 Gbps and 5 Gbps |
| Nominal Network Class | 10 Gb/s |
| Package Designator | YJH |
| نوع نصب | Surface mount |
| Lead-Free Status | Pb-free |
راهنمای پیکربندی پین VSC8248YJH-01 yjh
پیکربندی پین برای VSC8248YJH-01 (پکیج yjh). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای VSC8248YJH-01.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
VSC8248YJH-01 مناسب است برای 6 کاربردs: 10 Gb/s Ethernet Switching, Fibre Channel Edge Equipment, InfiniBand Network Adapters, Optical Network Terminals, Server Network Interface Cards, High-Speed Test Equipment.
10 Gb/s Ethernet Switching
The VSC8248YJH-01 fits quad-port 10 Gb/s Ethernet switch designs because it combines four clock-and-data-recovery channels with operation from 8.5 Gbps to 11.3 Gbps. Its XFI-to-XFI+ capability allows legacy XFI-facing logic to connect to newer clock-forwarding interfaces, while EDC addresses errors in the recovered link. In a line-card design, the device can sit between high-speed serial front ends and the switching fabric, reducing the number of separate recovery components. Board implementation should preserve controlled differential and parallel-interface impedance, minimize clock jitter-sensitive routing, and follow the manufacturer reference circuit for termination, supply decoupling, and exposed-pad thermal management.
پیشنهادی
Fibre Channel Edge Equipment
The VSC8248YJH-01 is applicable to Fibre Channel equipment operating at 2 Gbps or 4 Gbps and to aggregate links operating within its 8.5 Gbps to 11.3 Gbps range. Four recovered channels can support a concentrated interface arrangement in edge appliances, storage gateways, or switching platforms. Clock recovery is essential when the transmitter and receiver do not share a low-jitter source, while EDC helps maintain link integrity in demanding equipment. The implementation should separate recovery-clock routing from noisy data paths, provide the required reference-clock quality, and use the manufacturer-defined interface termination and decoupling values. Confirm channel-to-channel skew and operating margins against the device documentation before production release.
پیشنهادی
InfiniBand Network Adapters
The VSC8248YJH-01 supports network adapter and switching designs that use 2.5 Gbps or 5 Gbps InfiniBand links within the broader 8.5 Gbps to 11.3 Gbps operating range. Its quad-channel architecture can consolidate clock recovery across multiple high-speed ports, while XFI-to-XFI+ conversion supports transitions between interface implementations. This is useful in denser adapters where component count, power, and routing complexity must be controlled. Designers should use short controlled-impedance routes for high-speed data and clocks, maintain continuous ground references, and separate the recovered-clock domain from switching regulators. Validate the reference clock, power sequencing, termination, and channel timing against the manufacturer application guidance before fabrication.
پیشنهادی
Optical Network Terminals
The VSC8248YJH-01 fits optical network terminal backplanes where several recovered high-speed lanes terminate at a common data-processing fabric. Its 11.3 Gbps maximum rate supports 10 Gb/s-class service links, and the four-channel arrangement reduces the footprint required for parallel recovery functions. XFI-to-XFI+ conversion can bridge different network-processing interfaces, while EDC improves link robustness. In an optical terminal, place the CDR close to the host interface when practical to limit high-speed trace length, use the recommended termination network, and maintain continuous return paths beneath data and clock lanes. Validate thermal performance and power sequencing across the complete optical-module and line-card power domains.
پیشنهادی
Server Network Interface Cards
The VSC8248YJH-01 can support multi-port server network interface cards where a common high-speed interface must recover both data and clock. Four channels allow a card to serve multiple 10 Gb/s-class ports while sharing one timing-device package, provided all lanes operate within the 8.5 Gbps to 11.3 Gbps range. XFI-to-XFI+ conversion supports interface transitions in newer adapters, and EDC assists recovery in long or noisy board-level channels. Layout should minimize skew between wide parallel data buses and their associated clocking, provide clean reference-clock distribution, and isolate high-speed return currents from processor and memory power systems. Confirm host-facing logic levels and connector-channel mapping in the system design.
پیشنهادی
High-Speed Test Equipment
The VSC8248YJH-01 can be used in high-speed line-card and test equipment that accepts recovered 10 Gb/s-class signals. Its four recovery channels and broad 8.5 Gbps to 11.3 Gbps range allow a common timing architecture to handle multiple rates, while XFI-to-XFI+ conversion can simplify instrumentation around legacy and newer host interfaces. EDC is valuable when the recovered stream is monitored for link errors. Instrument designers should establish a low-jitter reference clock, use controlled-impedance routing with uninterrupted return paths, and keep recovered clocks away from switching-node noise. Validate each supported protocol’s timing, reset, and fault-reporting behavior against the manufacturer documentation before automating production tests.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای VSC8248YJH-01 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | YJH package |
| Brand | Microchip Technology |
| Device Type | Quad-channel clock and data recovery IC |
| Minimum Data Rate | 8.5 Gbps |
| Maximum Data Rate | 11.3 Gbps |
| Channel Count | 4 channels |
| Interface Conversion | XFI to XFI+ |
| Error Handling | EDC |
| Ethernet Support | 1.25 Gbps Ethernet |
| Fibre Channel Support | 2 Gbps and 4 Gbps |
| InfiniBand Support | 2.5 Gbps and 5 Gbps |
تفاوتهای کلیدی
- Four recovery channels in one timing IC (در مقابلSingle-channel retimer alternatives)
- Native XFI-to-XFI+ conversion (در مقابلCDRs limited to one interface form)
- Broad 10 Gb/s-class operating range (در مقابلLower-rate single-purpose clock recovery devices)
یادداشتهای طراحی
Route the high-speed serial and wide parallel interfaces as controlled-impedance nets with continuous reference planes and no unnecessary layer transitions. Keep recovered-clock traces away from switching regulators and high-current return paths. Match interface lengths where the manufacturer specifies timing or skew limits, and place termination networks close to the relevant driver or receiver so that reflections are controlled before the signal reaches the next device.
Apply the manufacturer’s recommended voltage rails, decoupling, and power-up sequence to every power pin. Place the required capacitors close to the corresponding device pins and provide a low-impedance path from the ground terminals to the exposed thermal pad if the YJH package includes one. Confirm the actual pin names, voltage tolerances, and maximum current limits in the datasheet before assigning rails or enabling the device.
Do not treat the VSC8248 family name as proof that every ordering suffix is interchangeable. Confirm the complete VSC8248YJH-01 order code against the YJH package drawing, pin table, temperature range, lifecycle status, and lead-time options. A substitution must preserve the 8.5 Gbps to 11.3 Gbps range, four-channel architecture, XFI-to-XFI+ conversion, EDC behavior, electrical limits, and pin-to-pin connectivity.
Clock and data recovery performance depends on reference-clock quality as well as channel layout. Use a low-jitter reference source, preserve recommended clock impedance, and isolate the clock network from digital switching noise. During validation, examine recovered-clock quality, eye behavior, channel skew, and link-error counters across temperature and supply corners rather than relying only on nominal link enumeration.
اطلاعات انطباق
The product listing identifies the VSC8248YJH-01 as Pb-free. Formal RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations for the exact orderable suffix are not stated and remain unknown.