Microchip Technology

VSC8248ZREV - 11.3 Gbps Quad CDR | Microchip Technology

MPN: VSC8248ZREV ✓ सक्रिय
न्यूनतम ऑर्डर मात्रा: 1 |
डेटाशीट उपलब्ध नहीं डेटाशीट खोजें
विकल्प देखें

VSC8248ZREV अवलोकन

Microchip Technology VSC8248ZREV is a four-channel clock and data recovery device operating from 8.5 Gbps to 11.3 Gbps. It integrates adaptive electronic dispersion compensation for high-speed optical and backplane links and is supplied in a bulk package configuration.

A clock and data recovery device, commonly called a CDR, extracts a usable data stream from a high-speed serial link and recovers the associated clock. This function sits within the physical-layer hierarchy of optical communications, Ethernet, Fibre Channel, and InfiniBand equipment. By regenerating timing and signal integrity at the receiver, a CDR allows downstream circuitry to operate without directly processing the degraded waveform received over a long channel.

The VSC8248ZREV provides four recovery channels, programmable input equalization, and a KR-compliant multi-tap output driver. Adaptive electronic dispersion compensation helps compensate for channel-related signal degradation. Together, these features target difficult printed-circuit-board and optical backplane channels where frequency-dependent loss, reflections, and timing distortion can impair data recovery.

The device supports operation from 8.5 Gbps through 11.3 Gbps and is associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand protocols. These protocol associations make the device relevant to 10G Ethernet, Fibre Channel, and InfiniBand signal paths, provided that the complete system timing, reference clock, and lane configuration satisfy the device requirements.

Typical applications include 10G Ethernet optical-module receivers, Fibre Channel switching equipment, InfiniBand adapters, backplane equalizers, and high-speed serial retiming subsystems. In each case, the CDR can reconstruct the receive clock while equalization and dispersion compensation improve signal margin before data reaches the packet-processing or framing layer.

Designers should evaluate the recovered-clock behavior, reference requirements, lane-to-lane skew, channel loss, and firmware configuration before committing a board layout. The bulk package designation indicates a shipment format rather than a surface-mount form factor, so the exact mechanical package, land pattern, pin count, and solder process must be confirmed before PCB design begins.

This product overview connects protocol support, recovery bandwidth, equalization, adaptive dispersion compensation, and replacement considerations to help engineers determine whether the VSC8248ZREV fits a specific 10G-class link architecture.

के लिए ड्रॉप-इन विकल्प VSC8248ZREV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

VSC8248ZREV विशेषताएं

Manufacturer Microchip Technology
Device Type Quad-channel clock and data recovery device
Number of Channels 4 channels
Minimum Data Rate 8.5 Gbps
Maximum Data Rate 11.3 Gbps
Adaptive Dispersion Compensation Integrated adaptive electronic dispersion compensation
Input Equalization Programmable
Output Driver KR-compliant multi-tap
IEEE Protocol Support IEEE 802.3ae and IEEE 802.3aq
SFF Protocol Support SFF-8431
Fibre Channel Support 8G Fibre Channel
InfiniBand Support 10G QDR InfiniBand
Shipping Format Bulk

VSC8248ZREV standard पिन कॉन्फ़िगरेशन गाइड

VSC8248ZREV (standard पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

VSC8248ZREV के लिए standard पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: VSC8248ZREV.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

VSC8248ZREV के लिए उपयुक्त है 6 अनुप्रयोगs: 10G Ethernet Optical Receivers, Fibre Channel Switching Equipment, 10G QDR InfiniBand Links, High-Speed Backplane Equalization, Optical Module Receive Equalization, Serial Protocol Test Equipment.

🌐

10G Ethernet Optical Receivers

The VSC8248ZREV fits 10G Ethernet optical-receiver paths because it provides four clock-and-data-recovery channels operating across 8.5 Gbps to 11.3 Gbps. According to Microchip Technology's device documentation, support for IEEE 802.3ae and IEEE 802.3aq links the device to 10G Ethernet physical-layer designs. Programmable input equalization can compensate for frequency-dependent loss encountered through optical modules and board interconnects, while adaptive electronic dispersion compensation helps restore timing margin. The multi-tap output driver also provides adjustable signal conditioning for downstream circuitry. System engineers must still verify lane rates, reference-clock requirements, channel loss, and configuration procedures before using the device in a production optical interface.

🖥️

Fibre Channel Switching Equipment

The VSC8248ZREV is applicable to 8G Fibre Channel equipment requiring parallel recovery of high-speed serial lanes. Its four-channel architecture supports 8.5 Gbps to 11.3 Gbps operation and includes support for 8G Fibre Channel in the documented protocol associations. According to Microchip Technology's device documentation, programmable input equalization and adaptive electronic dispersion compensation address loss and distortion in long or complex channels. These functions help the receiver recover timing and data before packet framing or switching logic processes the stream. Design validation should include the applicable Fibre Channel variant, channel insertion loss, reference-clock quality, jitter tolerance, lane skew, and the exact output-driver configuration used by the board.

🔧

10G QDR InfiniBand Links

The VSC8248ZREV supports 10G QDR InfiniBand link requirements through its 8.5 Gbps to 11.3 Gbps operating range and four-channel recovery architecture. According to Microchip Technology's device documentation, adaptive electronic dispersion compensation can reduce the effect of channel dispersion, while programmable input equalization addresses signal loss before clock and data recovery. The KR-compliant multi-tap output driver gives the physical-layer designer additional control over output waveform characteristics. Engineers should verify InfiniBand lane timing, equalization presets, reference-clock distribution, connector and cable behavior, and interoperability at system level. Configuration files and calibration procedures must also be validated for the deployed host adapter and switch architecture.

🖥️

High-Speed Backplane Equalization

The VSC8248ZREV can be used in high-speed backplane paths where frequency-dependent loss and reflections degrade a serial signal before it reaches the endpoint logic. According to Microchip Technology's device documentation, programmable input equalization and adaptive electronic dispersion compensation operate before recovered data and clock are delivered to the next circuit block. The 8.5 Gbps to 11.3 Gbps range suits 10G-class lanes, while four channels reduce the number of discrete recovery devices needed for a quad-lane path. The KR-compliant multi-tap output driver supports controlled output shaping, but engineers must characterize insertion loss, impedance discontinuities, jitter, lane skew, and channel length during system bring-up. PCB signal-integrity simulation remains essential.

📡

Optical Module Receive Equalization

The VSC8248ZREV is suitable for receive-side processing in high-speed optical modules, where optical conversion and electrical channel effects can distort the incoming serial waveform. Its four recovery channels operate from 8.5 Gbps to 11.3 Gbps and include programmable input equalization for channel-loss adjustment. According to Microchip Technology's device documentation, adaptive electronic dispersion compensation further supports timing recovery in impaired channels. An optical-module implementation must coordinate the CDR settings with the photodetector output, transimpedance amplifier, serializer, reference clock, and digital monitoring path. Thermal conditions inside the module are also important because four active channels contribute to total power consumption. Confirm the electrical limits and configuration sequence in the manufacturer documentation before layout release.

📺

Serial Protocol Test Equipment

The VSC8248ZREV can support multi-lane serial test and measurement systems that need to recover clocks and data from impaired 10G-class channels. Its 8.5 Gbps to 11.3 Gbps range covers the rates associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand links. According to Microchip Technology's device documentation, programmable equalization and adaptive dispersion compensation provide useful controls for characterizing channel-dependent behavior. Four channels can simplify parallel test-path design and reduce synchronization complexity. Instrument engineers must carefully control reference-clock phase, lane alignment, test-pattern handling, instrumentation bandwidth, and calibration sequence. The final measurement accuracy depends on the complete fixture, cables, adapters, and signal path rather than the CDR alone.

What is the VSC8248ZREV?
The VSC8248ZREV is a four-channel clock and data recovery device from Microchip Technology. It operates between 8.5 Gbps and 11.3 Gbps, integrates adaptive electronic dispersion compensation, and supports IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand applications. According to Microchip Technology's device documentation, its four independent channels allow one physical-layer device to serve multi-lane high-speed links.
What data rates does the VSC8248ZREV support?
The VSC8248ZREV supports serial data rates from 8.5 Gbps to 11.3 Gbps. This range covers the 10G-class channels associated with 10G Ethernet, 8G Fibre Channel, and 10G QDR InfiniBand. According to Microchip Technology's device documentation, engineers should operate each lane within its specified rate and verify the associated reference-clock and signal-conditioning requirements.
Which protocols are compatible with the VSC8248ZREV?
The VSC8248ZREV is associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand protocols. According to Microchip Technology's device documentation, protocol support identifies the link standards for which the recovery, equalization, and dispersion-compensation functions are intended. Final interoperability still depends on lane configuration, reference clock, media, and system-level validation.
What does a clock and data recovery IC do?
A clock and data recovery IC extracts timing from a serial data stream and regenerates a usable clock and data output. The VSC8248ZREV performs this function on four channels at rates from 8.5 Gbps to 11.3 Gbps. According to Microchip Technology's device documentation, adaptive dispersion compensation, programmable input equalization, and a multi-tap output driver help preserve signal margin across lossy channels.
Why use the VSC8248ZREV in a 10G Ethernet design?
The VSC8248ZREV suits 10G Ethernet links because it combines four recovery channels with support for IEEE 802.3ae and IEEE 802.3aq. According to Microchip Technology's device documentation, programmable input equalization and adaptive electronic dispersion compensation address frequency-dependent channel loss. Confirming the exact optical or copper channel and its loss profile remains essential before finalizing the design.
What is the difference between VSC8248ZREV and a retimer?
The VSC8248ZREV is a clock and data recovery device with four channels, an 8.5 Gbps to 11.3 Gbps operating range, and integrated adaptive electronic dispersion compensation. A retimer may regenerate signals without providing the same complete clock-and-data recovery architecture or protocol coverage. According to Microchip Technology's device documentation, choose the VSC8248ZREV when recovered timing, equalization, and supported lane protocols match the link.
When should I choose the VSC8248ZREV instead of another quad-channel CDR?
Choose the VSC8248ZREV when the design needs four channels, an 8.5 Gbps to 11.3 Gbps operating range, and support for IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, or 10G QDR InfiniBand. According to Microchip Technology's device documentation, programmable input equalization and adaptive dispersion compensation are central technical features. Select another CDR when its supported rates, protocols, and compensation architecture better match the channel.
Is the VSC8248ZREV suitable for Fibre Channel and InfiniBand links?
Yes, the VSC8248ZREV is suitable for supported 8G Fibre Channel and 10G QDR InfiniBand physical-layer designs. According to Microchip Technology's device documentation, the device supports these protocols in addition to IEEE 802.3ae, IEEE 802.3aq, and SFF-8431. Its four-channel architecture and adaptive electronic dispersion compensation are particularly relevant to multi-lane links affected by board or media loss.
What can replace the VSC8248ZREV?
A suitable replacement must provide four channels, pin-to-pin compatibility, operation from 8.5 Gbps to 11.3 Gbps, and compatible equalization and clock-recovery functions. No distinct drop-in replacement has been confirmed for this product. Use Microchip Technology's cross-reference search with VSC8248ZREV, then verify package, pinout, reference clock, protocol support, firmware, and signal-integrity performance before changing the PCB.
Where can I download the VSC8248ZREV datasheet PDF?
The VSC8248ZREV datasheet should be obtained through Microchip Technology's product documentation or its official cross-reference search. Use the exact VSC8248ZREV identifier and the base product identifier VSC8248 when searching. The documentation should provide the authoritative package drawing, pin descriptions, electrical limits, reference-clock requirements, timing diagrams, and configuration procedure required for a hardware design.
Where can I find the VSC8248ZREV pinout?
The VSC8248ZREV pinout is defined in the manufacturer datasheet and package drawing. Before assigning PCB tracks, use the pin-description table and land-pattern drawing for the exact ordering code and confirm whether the supplied configuration is bulk packaging. Because package, pin count, and pad geometry are essential to PCB correctness, do not infer the footprint from the VSC8248 base identifier alone.
How much power does the VSC8248ZREV dissipate?
The VSC8248ZREV power dissipation depends on supply voltage, channel data rate, equalization settings, output configuration, and ambient temperature. A precise value cannot be stated without those operating conditions and the device's electrical specifications. According to Microchip Technology's device documentation, use the specified current, voltage, and thermal information to calculate worst-case dissipation across all four channels and every supported operating mode.
Is the VSC8248ZREV currently in stock?
Current stock and shipment timing for VSC8248ZREV should be requested through the Request a Quote form on this page. The exact answer can vary by package configuration, quantity, and manufacturing allocation. Confirm the manufacturer part number, desired quantity, target date, and bulk-packaging requirement when requesting a quotation for the four-channel 8.5 Gbps to 11.3 Gbps clock and data recovery device.
What is the price of the VSC8248ZREV?
The current quotation for VSC8248ZREV is obtained through the Request a Quote form on this page. Quote requests should specify the required quantity and bulk-packaging requirement. The VSC8248ZREV is a four-channel device operating from 8.5 Gbps to 11.3 Gbps with adaptive electronic dispersion compensation, so confirmed configuration and quantity are necessary for an accurate commercial response.
What is the lead time for the VSC8248ZREV?
The lead time for VSC8248ZREV depends on current manufacturing allocation and the quantity requested. Submit the required quantity and target delivery date through the Request a Quote form on this page. Include the bulk package configuration and any schedule constraints because the four-channel, 8.5 Gbps to 11.3 Gbps clock and data recovery device may require planning against the complete production schedule.
What key specifications should engineers know about VSC8248ZREV?
The key specifications are four channels, an 8.5 Gbps to 11.3 Gbps data-rate range, integrated adaptive electronic dispersion compensation, programmable input equalization, and a KR-compliant multi-tap output driver. According to Microchip Technology's device documentation, the device supports IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand. Package, supply, and thermal limits require confirmation from the manufacturer documentation.

के लिए इंजीनियरिंग संदर्भ डेटा VSC8248ZREV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the VSC8248ZREV when a design needs four clock-and-data-recovery channels at 8.5 Gbps to 11.3 Gbps, particularly for links associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, or 10G QDR InfiniBand. Its programmable input equalization, adaptive electronic dispersion compensation, and KR-compliant multi-tap output driver make it relevant to impaired backplane, optical-module, and high-speed network paths. Before committing, confirm the exact package, pinout, reference-clock requirements, power limits, and configuration workflow in the manufacturer documentation. Select another device only when its recovered-clock behavior, compensation features, supported rates, protocols, and footprint satisfy the complete system requirements. The VSC8248ZREV is most appropriate when multi-lane consolidation and the documented 10G-class protocol set are central priorities.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand Microchip Technology
Device Type Quad-channel clock and data recovery device
Number of Channels 4 channels
Minimum Data Rate 8.5 Gbps
Maximum Data Rate 11.3 Gbps
Adaptive Dispersion Compensation Integrated adaptive electronic dispersion compensation
Input Equalization Programmable
Output Driver KR-compliant multi-tap
Protocol Support IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand

डिज़ाइन नोट्स

Treat the VSC8248ZREV as a channel-recovery element rather than a substitute for careful board layout. Model insertion loss, return loss, package transitions, connector launches, and lane skew across the 8.5 Gbps to 11.3 Gbps range. Programmable input equalization and adaptive dispersion compensation can improve recovery margin, but their effectiveness depends on the actual channel. Validate settings through measurement rather than relying only on nominal configuration values.

Calculate power and thermal requirements across all four channels and the complete supported data-rate range. Include supply current under the intended equalization, output-driver, reference-clock, and activity conditions rather than using a single nominal operating point. Use the manufacturer's electrical and thermal limits to determine whether the exact package needs additional copper, airflow, or a lower data-rate operating profile. Account for startup and configuration transients when validating the power architecture.

Do not select a replacement using only the base VSC8248 identifier. Confirm the complete ordering code, package, pin count, reference-clock requirements, supported protocols, and configuration interface. A functionally similar four-channel CDR can still require a different PCB footprint or firmware workflow. For an existing design, compare the full pin description and package drawing before treating any substitution as pin-to-pin compatible.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Use the manufacturer declaration and product documentation for the exact ordering code to confirm environmental, automotive, halogen-free, and conflict-minerals status.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

VSC8248ZREV datasheet VSC8248ZREV specifications VSC8248ZREV pinout VSC8248ZREV datasheet pdf VSC8248ZREV equivalent VSC8248ZREV replacement VSC8248ZREV cross reference Microchip VSC8248ZREV VSC8248 quad CDR VSC8248 11.3 Gbps VSC8248ZREV InfiniBand VSC8248ZREV Fibre Channel VSC8248ZREV price VSC8248ZREV stock VSC8248 clock data recovery IC

संबंधित कंपोनेंट्स और शब्द

Microchip Technology VSC8248ZREV VSC8248 clock and data recovery CDR quad-channel CDR clock recovery data recovery adaptive electronic dispersion compensation EDC programmable input equalization multi-tap output driver IEEE 802.3ae IEEE 802.3aq SFF-8431 8G Fibre Channel 10G QDR InfiniBand 8.5 Gbps 11.3 Gbps physical-layer IC clock and timing IC high-speed serial interface backplane equalization optical receiver signal integrity
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें