VSC8248ZREV - 11.3 Gbps Quad CDR | Microchip Technology
MPN: VSC8248ZREV ✓ AktifVSC8248ZREV Genel Bakış
A clock and data recovery device, commonly called a CDR, extracts a usable data stream from a high-speed serial link and recovers the associated clock. This function sits within the physical-layer hierarchy of optical communications, Ethernet, Fibre Channel, and InfiniBand equipment. By regenerating timing and signal integrity at the receiver, a CDR allows downstream circuitry to operate without directly processing the degraded waveform received over a long channel.
The VSC8248ZREV provides four recovery channels, programmable input equalization, and a KR-compliant multi-tap output driver. Adaptive electronic dispersion compensation helps compensate for channel-related signal degradation. Together, these features target difficult printed-circuit-board and optical backplane channels where frequency-dependent loss, reflections, and timing distortion can impair data recovery.
The device supports operation from 8.5 Gbps through 11.3 Gbps and is associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand protocols. These protocol associations make the device relevant to 10G Ethernet, Fibre Channel, and InfiniBand signal paths, provided that the complete system timing, reference clock, and lane configuration satisfy the device requirements.
Typical applications include 10G Ethernet optical-module receivers, Fibre Channel switching equipment, InfiniBand adapters, backplane equalizers, and high-speed serial retiming subsystems. In each case, the CDR can reconstruct the receive clock while equalization and dispersion compensation improve signal margin before data reaches the packet-processing or framing layer.
Designers should evaluate the recovered-clock behavior, reference requirements, lane-to-lane skew, channel loss, and firmware configuration before committing a board layout. The bulk package designation indicates a shipment format rather than a surface-mount form factor, so the exact mechanical package, land pattern, pin count, and solder process must be confirmed before PCB design begins.
This product overview connects protocol support, recovery bandwidth, equalization, adaptive dispersion compensation, and replacement considerations to help engineers determine whether the VSC8248ZREV fits a specific 10G-class link architecture.
Drop-in alternatifler için VSC8248ZREV — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinVSC8248ZREV Özellikler
| Manufacturer | Microchip Technology |
| Device Type | Quad-channel clock and data recovery device |
| Number of Channels | 4 channels |
| Minimum Data Rate | 8.5 Gbps |
| Maximum Data Rate | 11.3 Gbps |
| Adaptive Dispersion Compensation | Integrated adaptive electronic dispersion compensation |
| Input Equalization | Programmable |
| Output Driver | KR-compliant multi-tap |
| IEEE Protocol Support | IEEE 802.3ae and IEEE 802.3aq |
| SFF Protocol Support | SFF-8431 |
| Fibre Channel Support | 8G Fibre Channel |
| InfiniBand Support | 10G QDR InfiniBand |
| Shipping Format | Bulk |
VSC8248ZREV standard Pin Yapısı Kılavuzu
VSC8248ZREV (standard paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: VSC8248ZREV.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
VSC8248ZREV için uygundur 6 uygulamas: 10G Ethernet Optical Receivers, Fibre Channel Switching Equipment, 10G QDR InfiniBand Links, High-Speed Backplane Equalization, Optical Module Receive Equalization, Serial Protocol Test Equipment.
10G Ethernet Optical Receivers
The VSC8248ZREV fits 10G Ethernet optical-receiver paths because it provides four clock-and-data-recovery channels operating across 8.5 Gbps to 11.3 Gbps. According to Microchip Technology's device documentation, support for IEEE 802.3ae and IEEE 802.3aq links the device to 10G Ethernet physical-layer designs. Programmable input equalization can compensate for frequency-dependent loss encountered through optical modules and board interconnects, while adaptive electronic dispersion compensation helps restore timing margin. The multi-tap output driver also provides adjustable signal conditioning for downstream circuitry. System engineers must still verify lane rates, reference-clock requirements, channel loss, and configuration procedures before using the device in a production optical interface.
Fibre Channel Switching Equipment
The VSC8248ZREV is applicable to 8G Fibre Channel equipment requiring parallel recovery of high-speed serial lanes. Its four-channel architecture supports 8.5 Gbps to 11.3 Gbps operation and includes support for 8G Fibre Channel in the documented protocol associations. According to Microchip Technology's device documentation, programmable input equalization and adaptive electronic dispersion compensation address loss and distortion in long or complex channels. These functions help the receiver recover timing and data before packet framing or switching logic processes the stream. Design validation should include the applicable Fibre Channel variant, channel insertion loss, reference-clock quality, jitter tolerance, lane skew, and the exact output-driver configuration used by the board.
10G QDR InfiniBand Links
The VSC8248ZREV supports 10G QDR InfiniBand link requirements through its 8.5 Gbps to 11.3 Gbps operating range and four-channel recovery architecture. According to Microchip Technology's device documentation, adaptive electronic dispersion compensation can reduce the effect of channel dispersion, while programmable input equalization addresses signal loss before clock and data recovery. The KR-compliant multi-tap output driver gives the physical-layer designer additional control over output waveform characteristics. Engineers should verify InfiniBand lane timing, equalization presets, reference-clock distribution, connector and cable behavior, and interoperability at system level. Configuration files and calibration procedures must also be validated for the deployed host adapter and switch architecture.
High-Speed Backplane Equalization
The VSC8248ZREV can be used in high-speed backplane paths where frequency-dependent loss and reflections degrade a serial signal before it reaches the endpoint logic. According to Microchip Technology's device documentation, programmable input equalization and adaptive electronic dispersion compensation operate before recovered data and clock are delivered to the next circuit block. The 8.5 Gbps to 11.3 Gbps range suits 10G-class lanes, while four channels reduce the number of discrete recovery devices needed for a quad-lane path. The KR-compliant multi-tap output driver supports controlled output shaping, but engineers must characterize insertion loss, impedance discontinuities, jitter, lane skew, and channel length during system bring-up. PCB signal-integrity simulation remains essential.
Optical Module Receive Equalization
The VSC8248ZREV is suitable for receive-side processing in high-speed optical modules, where optical conversion and electrical channel effects can distort the incoming serial waveform. Its four recovery channels operate from 8.5 Gbps to 11.3 Gbps and include programmable input equalization for channel-loss adjustment. According to Microchip Technology's device documentation, adaptive electronic dispersion compensation further supports timing recovery in impaired channels. An optical-module implementation must coordinate the CDR settings with the photodetector output, transimpedance amplifier, serializer, reference clock, and digital monitoring path. Thermal conditions inside the module are also important because four active channels contribute to total power consumption. Confirm the electrical limits and configuration sequence in the manufacturer documentation before layout release.
Serial Protocol Test Equipment
The VSC8248ZREV can support multi-lane serial test and measurement systems that need to recover clocks and data from impaired 10G-class channels. Its 8.5 Gbps to 11.3 Gbps range covers the rates associated with IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand links. According to Microchip Technology's device documentation, programmable equalization and adaptive dispersion compensation provide useful controls for characterizing channel-dependent behavior. Four channels can simplify parallel test-path design and reduce synchronization complexity. Instrument engineers must carefully control reference-clock phase, lane alignment, test-pattern handling, instrumentation bandwidth, and calibration sequence. The final measurement accuracy depends on the complete fixture, cables, adapters, and signal path rather than the CDR alone.
Mühendislik referans verileri: VSC8248ZREV — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Brand | Microchip Technology |
| Device Type | Quad-channel clock and data recovery device |
| Number of Channels | 4 channels |
| Minimum Data Rate | 8.5 Gbps |
| Maximum Data Rate | 11.3 Gbps |
| Adaptive Dispersion Compensation | Integrated adaptive electronic dispersion compensation |
| Input Equalization | Programmable |
| Output Driver | KR-compliant multi-tap |
| Protocol Support | IEEE 802.3ae, IEEE 802.3aq, SFF-8431, 8G Fibre Channel, and 10G QDR InfiniBand |
Tasarım Notları
Treat the VSC8248ZREV as a channel-recovery element rather than a substitute for careful board layout. Model insertion loss, return loss, package transitions, connector launches, and lane skew across the 8.5 Gbps to 11.3 Gbps range. Programmable input equalization and adaptive dispersion compensation can improve recovery margin, but their effectiveness depends on the actual channel. Validate settings through measurement rather than relying only on nominal configuration values.
Calculate power and thermal requirements across all four channels and the complete supported data-rate range. Include supply current under the intended equalization, output-driver, reference-clock, and activity conditions rather than using a single nominal operating point. Use the manufacturer's electrical and thermal limits to determine whether the exact package needs additional copper, airflow, or a lower data-rate operating profile. Account for startup and configuration transients when validating the power architecture.
Do not select a replacement using only the base VSC8248 identifier. Confirm the complete ordering code, package, pin count, reference-clock requirements, supported protocols, and configuration interface. A functionally similar four-channel CDR can still require a different PCB footprint or firmware workflow. For an existing design, compare the full pin description and package drawing before treating any substitution as pin-to-pin compatible.
Uyumluluk Bilgisi
Use the manufacturer declaration and product documentation for the exact ordering code to confirm environmental, automotive, halogen-free, and conflict-minerals status.