W78E052C40DL - 40MHz 8KB 8051 Flash Microcontroller
MPN: W78E052C40DL ✗ जीवन की समाप्तिW78E052C40DL अवलोकन
A microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, I/O ports, and peripherals on one semiconductor device. Within the semiconductor hierarchy, the W78E052C40DL belongs to the 8-bit MCU, embedded-controller, and 8051-compatible product families. This combination makes it suitable for products that need deterministic control functions without the cost or complexity of a larger application processor.
The device provides 8 KB of Flash program memory, a 40 MHz clock rating, and 32 I/O pins. Its listed peripherals include a UART/USART interface, external-bus or external-memory interfacing, power-on reset, and a watchdog timer. These functions support serial communications, deterministic peripheral monitoring, and embedded supervisory control in industrial, consumer, communications, and appliance equipment.
The W78E052C family is designed around an 8051-compatible instruction set while supporting a wider operating-frequency range than a conventional baseline 8051 implementation. In a typical system, firmware uses the parallel I/O ports to drive relays, indicators, displays, or actuators and uses the serial interface for configuration exchange or communication with another controller. The watchdog provides an independent mechanism for recovering from stalled firmware execution.
Typical applications include appliance controllers, industrial sequence controllers, embedded interface modules, communication equipment, instrumentation peripherals, and compact automation controllers. The 40 MHz operating rating provides more instruction throughput than slower 8051-class devices, while the 8 KB Flash footprint is appropriate for compact control firmware rather than feature-heavy graphical or high-capacity applications.
PCB design should follow the pin arrangement and decoupling guidance in the manufacturer datasheet. Because this is a 40-pin DIP device, a through-hole layout is required rather than a surface-mount land pattern. Confirm oscillator, reset, port, and supply connections against the exact W78E052C40DL pin description table before fabrication, and avoid assigning alternate functions to port pins without checking their electrical behavior.
This page consolidates the device identity, core specifications, connectivity features, lifecycle information, sourcing workflow, and application guidance. It also distinguishes the documented 40 MHz, 8 KB Flash configuration from related W78E052 variants, helping engineers confirm whether the obsolete W78E052C40DL remains appropriate for an existing design or whether a redesign should use a currently supported controller.
के लिए ड्रॉप-इन विकल्प W78E052C40DL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं W78E052C40DL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Program Memory Size, Number of I/O Pins, Package, Product Type, RAM Size.
W78E052C40DD
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
W78E051C40DL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →W78E054C40DL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →W78E056C40DL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
W78E058C40DL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
W78E052C40DL Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit microcontroller |
| Manufacturer | Nuvoton Technology Corporation |
| Original Product Family | Winbond W78E052C |
| Processor Core | 8051-compatible 8-bit core |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 40 MHz |
| Program Memory Size | 8 KB Flash |
| Program Memory Organization | 8K x 8 bits |
| Number of I/O Pins | 32 pins |
| Package Type | 40-pin DIP |
| Serial Interface | UART/USART |
| External Interface | EBI/EMI |
| Reset Feature | Power-on reset (POR) |
| Watchdog Feature | Watchdog timer (WDT) |
| Program Memory Type | Flash |
| लाइफसाइकिल स्थिति | Obsolete |
W78E052C40DL 40-pin dip पिन कॉन्फ़िगरेशन गाइड
W78E052C40DL (40-pin dip पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: W78E052C40DL.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
W78E052C40DL के लिए उपयुक्त है 6 अनुप्रयोगs: Appliance Control, Industrial Sequence Controller, Serial Communication Interface, Instrumentation and Data Acquisition, Communication Equipment, Embedded Automation Controller.
Appliance Control
The W78E052C40DL fits compact appliance controllers that coordinate relays, indicators, buttons, and sensors. Its 8051-compatible instruction set supports straightforward state-machine firmware, while the 40 MHz operating rating provides useful timing headroom for motor-stepping sequences, debounce logic, and display updates. The 32 I/O pins reduce the need for an external I/O expander in moderately complex products. Firmware can use the UART/USART for configuration or service communication and the watchdog timer to recover from an unexpected control-loop stall. Because the device is obsolete, this application is most appropriate for preserving an existing appliance platform, reproducing a proven controller, or supporting long-lived field equipment.
Industrial Sequence Controller
The W78E052C40DL can serve as a deterministic sequence controller for pumps, valves, lamps, counters, and simple interlocks. Its 40 MHz maximum frequency and 8051-compatible architecture support responsive execution of control states, while 32 I/O pins provide direct connections to discrete inputs and outputs. The EBI/EMI interface may be used with compatible external devices when the board needs additional memory or peripheral access. A watchdog timer improves supervisory behavior by forcing a reset when firmware stops progressing. For new industrial products, verify electrical ratings and obtain a currently supported controller; for legacy equipment, the W78E052C40DL preserves the proven 40-pin DIP architecture and original firmware environment.
Serial Communication Interface
The W78E052C40DL is suitable for a compact serial interface module that converts a simple host command stream into control or monitoring signals. Its UART/USART supports bidirectional serial communication, while 32 I/O pins can operate status indicators, handshake signals, or discrete outputs. At a maximum 40 MHz operating frequency, the controller has considerable timing margin for framing, command parsing, checks, and fault reporting. The 8 KB Flash capacity is appropriate for a focused protocol stack and configuration logic. Designers should calculate peripheral baud-rate and timing requirements from the manufacturer datasheet, confirm the external transceiver interface, and validate watchdog recovery behavior before deploying the module in unattended equipment.
Instrumentation and Data Acquisition
The W78E052C40DL can act as a supervisory controller in compact instrumentation systems that gather switch or sensor inputs and coordinate an external measurement or signal-processing device. Its 32 I/O pins support digital control interfaces, status lines, and multiplexed sensor selection, while the 8051-compatible core permits existing 8051 firmware libraries to be reused. The 40 MHz rating supports efficient polling, filtering, timing, and protocol handling. Power-on reset supports deterministic startup, and the watchdog helps recover from firmware faults. For laboratory or field instruments, validate analog interfaces separately and ensure the selected MCU grade meets the required temperature and supply conditions before incorporating this obsolete device into a new measurement platform.
Communication Equipment
The W78E052C40DL fits legacy communication equipment where a local controller manages relays, indicators, line-interface control signals, or configuration ports. The 8051-compatible instruction set can simplify migration of established protocol and supervisory code, while the 40 MHz operating frequency offers additional execution margin compared with slower 8051-class devices. Eight kilobytes of Flash is suitable for compact firmware, and the UART/USART provides a natural interface for terminal, service, or upstream-controller communications. Because EBI/EMI and timing behavior must match the original system, use the manufacturer datasheet to reproduce bus connections and clock configuration. This obsolete MCU is best treated as a continuity choice for proven designs rather than the default choice for new communication hardware.
Embedded Automation Controller
The W78E052C40DL can implement a compact automation controller for pumps, valves, counters, alarms, and scheduled output sequences. Its 32 I/O pins allow direct control of multiple discrete functions, while the 40 MHz 8051-compatible core executes the timing logic needed for debounce, interlocking, and state transitions. The watchdog timer provides an independent recovery path after firmware or external hardware stalls, and UART/USART permits diagnostics or parameter downloads. Eight kilobytes of Flash limits the controller to appropriately compact control tasks rather than large data logging or graphical interfaces. For new automation equipment, compare a supported MCU with equivalent I/O count and peripheral timing; for retrofits, preserve the original footprint and validate reset, oscillator, and watchdog behavior during commissioning.
के लिए इंजीनियरिंग संदर्भ डेटा W78E052C40DL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Nuvoton Technology Corporation |
| Processor Core | 8051-compatible 8-bit core |
| Maximum Clock Frequency | 40 MHz |
| Program Memory | 8 KB Flash (8K x 8 bits) |
| Number of I/O Pins | 32 pins |
| Package | 40-pin DIP |
| Serial Interface | UART/USART |
| External Interface | EBI/EMI |
| System Functions | Power-on reset and watchdog timer |
| Lifecycle Status | Obsolete |
मुख्य विशेषताएँ
- High-frequency 8051-compatible control (बनामGeneric baseline 8051 MCU)
- Integrated system-control peripherals (बनामMinimal 8051 controller)
- Compact legacy-compatible package (बनामSurface-mount 8051 controller)
डिज़ाइन नोट्स
Use the 40-pin DIP footprint and preserve the package orientation defined by the manufacturer pin-description table. Locate the oscillator, reset, and decoupling connections according to the datasheet reference layout, and route sensitive clock traces away from relay-driver outputs and switching nodes. Because this device is a through-hole DIP package, verify hole diameter, pin spacing, pad numbering, and component clearance against the physical package drawing before releasing the PCB.
Follow the manufacturer's supply-voltage limits and external component recommendations exactly. Place supply bypass capacitance close to the device's supply and ground pins, keeping the return-current path short and continuous. If an oscillator is used, follow the recommended crystal or ceramic-resonator network and account for the associated loading and startup requirements. Avoid adding supply rails or signal levels that differ from those of the original W78E052C40DL board.
Do not treat 8051 instruction-set compatibility as proof that another MCU is a drop-in replacement. A substitute must also match the 40-pin DIP pin functions, clock arrangement, reset behavior, memory capacity, port electrical characteristics, UART behavior, watchdog operation, and supply requirements. Reuse of legacy firmware also requires validation of interrupt priorities, timer assumptions, startup code, and any register differences. Obtain a formal compatibility review before substitution approval.
Separate digital control nets from noisy actuator and power-conversion paths. Connect serial interfaces through appropriately designed protection and grounding arrangements, and use short return paths for peripheral buses. Where EBI/EMI connects to external devices, check signal timing, loading, and termination requirements from the manufacturer timing tables. Prototype the clock, reset, programming interface, and watchdog behavior before connecting the board to high-power external equipment.
अनुपालन जानकारी
The manufacturer datasheet and product documentation do not establish the requested environmental and material-compliance fields for this obsolete device. AEC-Q100 is not applicable to this general-purpose 8051-compatible microcontroller.