Nuvoton Technology Corporation

W78E052C40DL - 40MHz 8KB 8051 Flash Microcontroller

MPN: W78E052C40DL ✗ Tapus ng Buhay
40-pin DIP Package 40 MHz Speed 8 KB Flash Memory
MOQ: 1 |

W78E052C40DL Ulas

The Nuvoton Technology Corporation W78E052C40DL is an 8-bit W78-series microcontroller with a 40 MHz operating frequency, 8 KB of program Flash memory, 32 general-purpose I/O pins, and a 40-pin DIP package. Its instruction set is compatible with the standard 8051 architecture, allowing engineers to retain familiar programming models while using a higher-frequency general-purpose control device.

A microcontroller is a compact embedded-control IC that integrates a processor core, program memory, data memory, I/O ports, and peripherals on one semiconductor device. Within the semiconductor hierarchy, the W78E052C40DL belongs to the 8-bit MCU, embedded-controller, and 8051-compatible product families. This combination makes it suitable for products that need deterministic control functions without the cost or complexity of a larger application processor.

The device provides 8 KB of Flash program memory, a 40 MHz clock rating, and 32 I/O pins. Its listed peripherals include a UART/USART interface, external-bus or external-memory interfacing, power-on reset, and a watchdog timer. These functions support serial communications, deterministic peripheral monitoring, and embedded supervisory control in industrial, consumer, communications, and appliance equipment.

The W78E052C family is designed around an 8051-compatible instruction set while supporting a wider operating-frequency range than a conventional baseline 8051 implementation. In a typical system, firmware uses the parallel I/O ports to drive relays, indicators, displays, or actuators and uses the serial interface for configuration exchange or communication with another controller. The watchdog provides an independent mechanism for recovering from stalled firmware execution.

Typical applications include appliance controllers, industrial sequence controllers, embedded interface modules, communication equipment, instrumentation peripherals, and compact automation controllers. The 40 MHz operating rating provides more instruction throughput than slower 8051-class devices, while the 8 KB Flash footprint is appropriate for compact control firmware rather than feature-heavy graphical or high-capacity applications.

PCB design should follow the pin arrangement and decoupling guidance in the manufacturer datasheet. Because this is a 40-pin DIP device, a through-hole layout is required rather than a surface-mount land pattern. Confirm oscillator, reset, port, and supply connections against the exact W78E052C40DL pin description table before fabrication, and avoid assigning alternate functions to port pins without checking their electrical behavior.

This page consolidates the device identity, core specifications, connectivity features, lifecycle information, sourcing workflow, and application guidance. It also distinguishes the documented 40 MHz, 8 KB Flash configuration from related W78E052 variants, helping engineers confirm whether the obsolete W78E052C40DL remains appropriate for an existing design or whether a redesign should use a currently supported controller.

Mga alternatibo na pwedeng ilagay na W78E052C40DL — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok W78E052C40DL (parehas na form factor at footprint) — pagkakaiba sa Program Memory Size, Number of I/O Pins, Package, Product Type, RAM Size.

Nuvoton Technology Corporation
Program Memory Size: 4 KB (4K x 8)
Number of I/O Pins: 32
Package: 40-DIP
Ikabit sa W78E052C40DL →
Nuvoton Technology Corporation
Program Memory Size: 16KB (16K x 8) Flash
Package: 40-DIP, through-hole
RAM Size: 256 x 8 bits (256 bytes)
Ikabit sa W78E052C40DL →

W78E052C40DD

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 LQFP-48
Same 40 MHz W78E052C core and 8 KB Flash target; ordering-suffix packaging options require footprint verification

📋 Alternatibo na Reference (hindi sa katalogo)

W78E051C40DL

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Nuvoton Technology Corporation
📦 LQFP-48
8-bit 8051-compatible flash microcontroller · W78 8051 · 8 bit · 40 MHz · 4 KB (4K x 8) · Flash · 128 x 8 bits · 32

Magkontak para sa presyo

Tingnan ang Datasheet →

W78E054C40DL

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Nuvoton Technology Corporation
📦 LQFP-48
8-bit 8051 microcontroller · 16KB (16K x 8) Flash · 256 x 8 bits (256 bytes) · 32 pins · 40MHz · 40-DIP, through-hole · 40 pins

Magkontak para sa presyo

Tingnan ang Datasheet →

W78E056C40DL

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 LQFP-48
Same 40 MHz W78E05 family and LQFP-48 footprint; code-memory size may differ by up to 100% from 8 KB

📋 Alternatibo na Reference (hindi sa katalogo)

W78E058C40DL

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 LQFP-48
Same 40 MHz W78E05 family and LQFP-48 footprint; code-memory size may differ by up to 150% from 8 KB

📋 Alternatibo na Reference (hindi sa katalogo)

W78E052C40DL Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit microcontroller
Manufacturer Nuvoton Technology Corporation
Original Product Family Winbond W78E052C
Processor Core 8051-compatible 8-bit core
Maksimum na Taktiko ng Oras 40 MHz
Program Memory Size 8 KB Flash
Program Memory Organization 8K x 8 bits
Number of I/O Pins 32 pins
Package Type 40-pin DIP
Serial Interface UART/USART
External Interface EBI/EMI
Reset Feature Power-on reset (POR)
Watchdog Feature Watchdog timer (WDT)
Program Memory Type Flash
Katayuan ng Lifecycle Obsolete

Gabay sa Pin Configuration ng W78E052C40DL 40-pin dip

Pin configuration para sa W78E052C40DL (40-pin dip package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 40-pin dip package para sa W78E052C40DL

Wala ng detalyadong pinout data na magagamit para sa W78E052C40DL.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

W78E052C40DL ay nararapat para sa 6 aplikasyons: Appliance Control, Industrial Sequence Controller, Serial Communication Interface, Instrumentation and Data Acquisition, Communication Equipment, Embedded Automation Controller.

🔧

Appliance Control

The W78E052C40DL fits compact appliance controllers that coordinate relays, indicators, buttons, and sensors. Its 8051-compatible instruction set supports straightforward state-machine firmware, while the 40 MHz operating rating provides useful timing headroom for motor-stepping sequences, debounce logic, and display updates. The 32 I/O pins reduce the need for an external I/O expander in moderately complex products. Firmware can use the UART/USART for configuration or service communication and the watchdog timer to recover from an unexpected control-loop stall. Because the device is obsolete, this application is most appropriate for preserving an existing appliance platform, reproducing a proven controller, or supporting long-lived field equipment.

🏭

Industrial Sequence Controller

The W78E052C40DL can serve as a deterministic sequence controller for pumps, valves, lamps, counters, and simple interlocks. Its 40 MHz maximum frequency and 8051-compatible architecture support responsive execution of control states, while 32 I/O pins provide direct connections to discrete inputs and outputs. The EBI/EMI interface may be used with compatible external devices when the board needs additional memory or peripheral access. A watchdog timer improves supervisory behavior by forcing a reset when firmware stops progressing. For new industrial products, verify electrical ratings and obtain a currently supported controller; for legacy equipment, the W78E052C40DL preserves the proven 40-pin DIP architecture and original firmware environment.

🌐

Serial Communication Interface

The W78E052C40DL is suitable for a compact serial interface module that converts a simple host command stream into control or monitoring signals. Its UART/USART supports bidirectional serial communication, while 32 I/O pins can operate status indicators, handshake signals, or discrete outputs. At a maximum 40 MHz operating frequency, the controller has considerable timing margin for framing, command parsing, checks, and fault reporting. The 8 KB Flash capacity is appropriate for a focused protocol stack and configuration logic. Designers should calculate peripheral baud-rate and timing requirements from the manufacturer datasheet, confirm the external transceiver interface, and validate watchdog recovery behavior before deploying the module in unattended equipment.

📺

Instrumentation and Data Acquisition

The W78E052C40DL can act as a supervisory controller in compact instrumentation systems that gather switch or sensor inputs and coordinate an external measurement or signal-processing device. Its 32 I/O pins support digital control interfaces, status lines, and multiplexed sensor selection, while the 8051-compatible core permits existing 8051 firmware libraries to be reused. The 40 MHz rating supports efficient polling, filtering, timing, and protocol handling. Power-on reset supports deterministic startup, and the watchdog helps recover from firmware faults. For laboratory or field instruments, validate analog interfaces separately and ensure the selected MCU grade meets the required temperature and supply conditions before incorporating this obsolete device into a new measurement platform.

📡

Communication Equipment

The W78E052C40DL fits legacy communication equipment where a local controller manages relays, indicators, line-interface control signals, or configuration ports. The 8051-compatible instruction set can simplify migration of established protocol and supervisory code, while the 40 MHz operating frequency offers additional execution margin compared with slower 8051-class devices. Eight kilobytes of Flash is suitable for compact firmware, and the UART/USART provides a natural interface for terminal, service, or upstream-controller communications. Because EBI/EMI and timing behavior must match the original system, use the manufacturer datasheet to reproduce bus connections and clock configuration. This obsolete MCU is best treated as a continuity choice for proven designs rather than the default choice for new communication hardware.

🤖

Embedded Automation Controller

The W78E052C40DL can implement a compact automation controller for pumps, valves, counters, alarms, and scheduled output sequences. Its 32 I/O pins allow direct control of multiple discrete functions, while the 40 MHz 8051-compatible core executes the timing logic needed for debounce, interlocking, and state transitions. The watchdog timer provides an independent recovery path after firmware or external hardware stalls, and UART/USART permits diagnostics or parameter downloads. Eight kilobytes of Flash limits the controller to appropriately compact control tasks rather than large data logging or graphical interfaces. For new automation equipment, compare a supported MCU with equivalent I/O count and peripheral timing; for retrofits, preserve the original footprint and validate reset, oscillator, and watchdog behavior during commissioning.

What is the W78E052C40DL?
The W78E052C40DL is an obsolete 8-bit Nuvoton Technology Corporation microcontroller based on the 8051-compatible W78E052C architecture. According to the manufacturer datasheet, it operates at up to 40 MHz, provides 8 KB of Flash program memory, and is packaged in a 40-pin DIP. It is intended for embedded-control systems requiring serial communications, parallel I/O, external-bus interfacing, power-on reset, and watchdog supervision.
What are the key specifications of W78E052C40DL that engineers should know?
The W78E052C40DL combines a 40 MHz maximum operating frequency with an 8-bit 8051-compatible core, 8 KB of Flash program memory, and 32 I/O pins. According to the manufacturer datasheet, its documented peripherals include UART/USART, EBI/EMI, power-on reset, and a watchdog timer. The component uses a 40-pin DIP package and is listed as obsolete, so its greatest practical value is supporting service, repair, and continuity requirements for existing equipment rather than new platform designs.
How much Flash memory does the W78E052C40DL have?
The W78E052C40DL contains 8 KB of Flash program memory organized as 8K x 8 bits. According to the manufacturer datasheet, this Flash-based arrangement supports in-system firmware retention and is appropriate for compact control routines, state machines, I/O sequencing, and serial protocol handling. Program-memory capacity should be checked against firmware size, bootloader requirements, and application update needs before the device is selected for a new design.
What clock speed does the W78E052C40DL use?
The W78E052C40DL has a maximum operating frequency of 40 MHz. According to the manufacturer datasheet, this is the upper frequency for the 8051-compatible W78E052C family and provides substantially more execution headroom than conventional low-speed 8051 controllers. The external crystal or clock circuit, bus timing, and any prescaler configuration must follow the device datasheet because the listed 40 MHz figure does not describe every timer or peripheral clock directly.
Where can I download the W78E052C40DL datasheet PDF?
The W78E052C40DL datasheet PDF is available from Nuvoton Technology Corporation through the product-document link on this page. It is titled for the W78E52C/W78E052C family and covers device architecture, timing, electrical characteristics, peripheral behavior, and package information. Use the W78E052C40DL suffix and 40-pin DIP ordering information when interpreting the document so that package-specific details are applied correctly.
Where can I find the W78E052C40DL pinout?
The W78E052C40DL pinout is found in the pin-description and package-dimension sections of the manufacturer datasheet for the W78E52C/W78E052C family. The device uses a 40-pin DIP package, so verify the notch orientation and pin-1 position when laying out the board. Use the exact pin-description table to identify oscillator, reset, supply, port, and alternate-function assignments before connecting external circuitry.
Is the W78E052C40DL suitable for industrial control applications?
The W78E052C40DL is technically suitable for compact embedded-control functions because it provides 32 I/O pins, UART/USART communication, external-bus interfacing, power-on reset, and a watchdog timer. Its 40 MHz 8051-compatible core can handle deterministic state-machine and supervisory tasks. For new industrial equipment, however, its obsolete lifecycle status should be weighed against currently supported devices, temperature qualification, long-term availability, and the need for periodic servicing.
What can replace the W78E052C40DL?
A true drop-in replacement for the W78E052C40DL must use the same 40-pin DIP footprint, preserve the 8051-compatible pin functions, and support comparable timing, memory, I/O, and serial-interface requirements. No independently verified drop-in candidate is established here. Treat the obsolete W78E052C40DL as a maintenance item and request a formal pin-to-pin and firmware-compatibility review before approving any substitute.
Is the W78E052C40DL the same as a 40 MHz 8051 controller with 8 KB Flash?
The W78E052C40DL has the headline configuration of an 8-bit 8051-compatible controller operating at 40 MHz with 8 KB of Flash memory, but those specifications alone do not establish interchangeability. Pin functions, timing, RAM, oscillator arrangement, peripheral behavior, reset logic, and package dimensions must also match. According to the manufacturer datasheet, its instruction set is compatible with the standard 8051, while device-level peripheral and electrical compatibility still requires separate verification.
When should I choose the W78E052C40DL instead of a current microcontroller?
Choose the W78E052C40DL when maintaining an existing 40-pin DIP W78E052C40DL design, reproducing obsolete equipment, or maintaining a proven firmware baseline where redesign risk is unacceptable. Its 40 MHz 8051-compatible core, 8 KB Flash memory, 32 I/O pins, UART/USART, and watchdog support the original control architecture. For new products, favor a supported MCU with comparable I/O and application peripherals because the W78E052C40DL is listed as obsolete.
What is the difference between W78E052C40DL and a generic 8051 MCU?
The W78E052C40DL differs from a generic baseline 8051 MCU through its 40 MHz operating rating and integrated application peripherals, while retaining an 8051-compatible instruction set. According to the manufacturer datasheet, it includes 8 KB of Flash, 32 I/O pins, UART/USART, EBI/EMI, power-on reset, and a watchdog timer. A generic 8051 with different RAM, timing, oscillator requirements, or package pinout is not automatically a drop-in replacement.
Where to buy W78E052C40DL online?
Use the Request a Quote form on this page to request availability and sourcing support for the W78E052C40DL. Because the component is listed as obsolete, request the manufacturer name, exact MPN suffix, desired package form, quantity, and any traceability requirements with the inquiry. This workflow is preferable to assuming that an older listing guarantees production availability or a controlled allocation.
What is the price of W78E052C40DL?
Current W78E052C40DL pricing depends on quantity, condition, and available allocation for this obsolete microcontroller. Submit the exact MPN and required quantity through the Request a Quote form on this page. The form allows XAIPART to return a current quotation without embedding a static price that could become misleading as legacy inventory changes.
What is the lead time for W78E052C40DL?
The W78E052C40DL is listed as obsolete, so its lead time depends on remaining manufacturer or authorized-channel inventory rather than normal production scheduling. Use the Request a Quote form on this page to state the required quantity, date code, packaging preference, and whether approved substitutions are acceptable. Confirm availability and lot traceability before committing the part to a repair or production schedule.
Is W78E052C40DL in stock?
The W78E052C40DL is classified as obsolete, and no current stock level is stated on this product page. Use the Request a Quote form on this page with the required quantity and sourcing constraints to request the latest allocation status. For maintenance programs, include the original assembly revision and acceptable date-code or traceability conditions so the resulting quotation matches the actual procurement requirement.
Which programming tools are compatible with W78E052C40DL?
The W78E052C40DL uses an 8051-compatible instruction set, so programming support depends on the chosen assembler, compiler, emulator, and device-programmer driver. According to the manufacturer datasheet, the core is compatible with the standard 8051, but that statement alone does not identify a specific programming-tool part number. Select tools that explicitly support the W78E052 family and validate the complete flash programming, erase, verification, and reset sequence before production use.

Impormasyon ng Talumpati sa Engineering for W78E052C40DL — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the W78E052C40DL when an existing 40-pin DIP design must be reproduced or serviced and its original 8051 firmware, clock arrangement, reset behavior, and peripheral mapping must remain intact. Its 40 MHz operating rating, 8 KB Flash memory, 32 I/O pins, UART/USART, EBI/EMI, power-on reset, and watchdog timer provide the documented feature set needed by compact legacy controllers. It is less appropriate for new products because its obsolete status creates long-term sourcing and qualification risk. A generic 8051 controller is not automatically interchangeable, because a valid replacement must also preserve package pins, electrical timing, RAM requirements, oscillator configuration, interrupt behavior, and peripheral registers. For modernization, compare a currently supported MCU with equivalent I/O and communications, then budget for PCB changes, firmware adaptation, and verification rather than assuming a drop-in substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Nuvoton Technology Corporation
Processor Core 8051-compatible 8-bit core
Maximum Clock Frequency 40 MHz
Program Memory 8 KB Flash (8K x 8 bits)
Number of I/O Pins 32 pins
Package 40-pin DIP
Serial Interface UART/USART
External Interface EBI/EMI
System Functions Power-on reset and watchdog timer
Lifecycle Status Obsolete

Pangunahing mga Pagkakaiba

  • High-frequency 8051-compatible control (kumpara saGeneric baseline 8051 MCU)
  • Integrated system-control peripherals (kumpara saMinimal 8051 controller)
  • Compact legacy-compatible package (kumpara saSurface-mount 8051 controller)

Talaan ng Disenyo

Use the 40-pin DIP footprint and preserve the package orientation defined by the manufacturer pin-description table. Locate the oscillator, reset, and decoupling connections according to the datasheet reference layout, and route sensitive clock traces away from relay-driver outputs and switching nodes. Because this device is a through-hole DIP package, verify hole diameter, pin spacing, pad numbering, and component clearance against the physical package drawing before releasing the PCB.

Follow the manufacturer's supply-voltage limits and external component recommendations exactly. Place supply bypass capacitance close to the device's supply and ground pins, keeping the return-current path short and continuous. If an oscillator is used, follow the recommended crystal or ceramic-resonator network and account for the associated loading and startup requirements. Avoid adding supply rails or signal levels that differ from those of the original W78E052C40DL board.

Do not treat 8051 instruction-set compatibility as proof that another MCU is a drop-in replacement. A substitute must also match the 40-pin DIP pin functions, clock arrangement, reset behavior, memory capacity, port electrical characteristics, UART behavior, watchdog operation, and supply requirements. Reuse of legacy firmware also requires validation of interrupt priorities, timer assumptions, startup code, and any register differences. Obtain a formal compatibility review before substitution approval.

Separate digital control nets from noisy actuator and power-conversion paths. Connect serial interfaces through appropriately designed protection and grounding arrangements, and use short return paths for peripheral buses. Where EBI/EMI connects to external devices, check signal timing, loading, and termination requirements from the manufacturer timing tables. Prototype the clock, reset, programming interface, and watchdog behavior before connecting the board to high-power external equipment.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer datasheet and product documentation do not establish the requested environmental and material-compliance fields for this obsolete device. AEC-Q100 is not applicable to this general-purpose 8051-compatible microcontroller.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

W78E052C40DL datasheet W78E052C40DL datasheet pdf W78E052C40DL pinout W78E052C40DL equivalent W78E052C40DL replacement W78E052C40DL cross reference W78E052C40DL 40MHz 8051 W78E052C40DL 8KB Flash W78E052C40DL 40 pin DIP Nuvoton W78E052C40DL W78E052C40DL application circuit W78E052C40DL price W78E052C40DL stock W78E052C40DL programming

Mga kaugnay na Mga Komponente at mga Tuntunin

Nuvoton Technology Corporation Winbond W78E052C40DL W78E052C W78E52C 8051-compatible core 8-bit microcontroller embedded controller semiconductor 40 MHz 8 KB Flash 32 I/O pins UART/USART EBI/EMI power-on reset watchdog timer 40-pin DIP through-hole package industrial control appliance control serial communication embedded automation RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ