WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic
MPN: WM8351CGEB/RV ✓ सक्रियWM8351CGEB/RV अवलोकन
An audio codec is an interface integrated circuit that converts digital audio data into an analog signal and converts analog audio back into digital data. The WM8351 belongs to the broader hierarchy of audio interface ICs, mixed-signal semiconductors, and embedded power-management devices. Integrating codec and power-management functions can reduce the number of separate components required around an application processor while centralizing analog routing and supply sequencing.
The WM8351CGEB/RV supports sampling rates up to 48 kHz and uses sigma-delta conversion for its two ADC and two DAC channels. The manufacturer specification lists a typical signal-to-noise ratio of 95 dB for both the ADC and DAC paths. Its analog supply range is 2.5 V to 3.6 V, while its digital supply range is 1.71 V to 3.6 V, allowing digital-interface and analog-circuit rails to be adjusted independently within their specified limits.
Integrated power management is a major architectural feature of this codec. It allows an embedded audio system to consolidate analog, digital, and amplifier-related supply functions under the control of one audio subsystem IC. The result can be a smaller board footprint and a more structured power-up sequence than a design using several unrelated regulators. Designers should still account for startup timing, supply ramp behavior, and load transients when planning the system power architecture.
Typical uses include portable media players, smart-home audio endpoints, communication equipment, industrial control panels, and other embedded platforms requiring stereo playback and record capability. The 12-bit converters and 48 kHz maximum rate are appropriate for general-purpose voice and music pathways, although the manufacturer's datasheet should be consulted for application-specific signal quality, clocking, and filter requirements.
Layout is critical because the WM8351CGEB/RV combines a 129-ball FBGA with sensitive analog and digital circuitry. Place decoupling capacitors close to the associated supply balls, keep analog and digital return paths separate until their planned grounding point, and follow the package-specific ball map for exposed-pad and thermal connections. This page combines package, conversion, supply, sourcing, and drop-in replacement information for faster engineering review.
के लिए ड्रॉप-इन विकल्प WM8351CGEB/RV — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं WM8351CGEB/RV (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Type.
WM8351CGEB/V
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
WM8351CGEB/RV Maximum Ratings और Electrical Characteristics
| Product Type | Stereo audio codec with power management |
| Maximum Sampling Rate | 48 kHz |
| Converter Resolution | 12 bit |
| ADC Count | 2 |
| DAC Count | 2 |
| Conversion Architecture | Sigma-delta |
| ADC Signal-to-Noise Ratio | 95 dB typical |
| DAC Signal-to-Noise Ratio | 95 dB typical |
| Analog Supply Voltage Range | 2.5 V to 3.6 V |
| Digital Supply Voltage Range | 1.71 V to 3.6 V |
| पैकेज | 129-FBGA, 7 mm x 7 mm |
| माउंटिंग प्रकार | Surface mount |
WM8351CGEB/RV 129-fbga, 7 mm x 7 mm पिन कॉन्फ़िगरेशन गाइड
WM8351CGEB/RV (129-fbga, 7 mm x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: WM8351CGEB/RV.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
WM8351CGEB/RV के लिए उपयुक्त है 6 अनुप्रयोगs: Portable Media Player, Smart Home Audio Endpoint, Industrial Control Panel, Communication Equipment, Network Speaker, Audio Test and Measurement.
Portable Media Player
The WM8351CGEB/RV fits portable media-player designs that require playback and recording in one compact subsystem. Its two DAC channels support stereo audio output, while two ADC channels provide a stereo capture path. The 12-bit converters operate up to 48 kHz, and the 1.71 V to 3.6 V digital supply range supports low-voltage processor interfaces. Its integrated power-management architecture can reduce the number of separate audio supply devices, although the designer must confirm amplifier loads, startup timing, and board-level thermal conditions before finalizing the power budget.
अनुशंसित
Smart Home Audio Endpoint
The WM8351CGEB/RV is suitable for connected audio endpoints that combine local playback with microphone capture. Its two ADC channels can support a stereo or dual-microphone input arrangement, while the dual DAC paths provide conventional stereo output. A 48 kHz maximum rate and 95 dB typical ADC and DAC signal-to-noise ratios align with general-purpose voice and music applications. Integrating power management with the codec can simplify rail management, but microphone biasing, analog grounding, and pop-noise control remain board-level design responsibilities.
अनुशंसित
Industrial Control Panel
The WM8351CGEB/RV can support audio notification and voice feedback in an industrial control panel. Its separate analog and digital supply ranges provide flexibility for systems operating a low-voltage digital processor rail and a 2.5 V to 3.6 V analog rail. The two ADC channels can accept panel microphones or line-level inputs, while two DAC channels can drive an external amplifier. Because industrial environments may introduce electrical noise and temperature extremes, the implementation should include appropriate filtering, grounding, shielding, and verified operating-temperature margins.
अनुशंसित
Communication Equipment
The WM8351CGEB/RV is applicable to communication equipment requiring local monitoring and playback alongside a digital signal processor or application processor. The sigma-delta ADC and DAC channels support 12-bit audio at rates up to 48 kHz, which is useful for voice monitoring, call audio, or configurable-rate audio interfaces. Its integrated power-management section may simplify supply coordination within compact embedded modules. Clocking, interface format, channel routing, and synchronization must be checked against the manufacturer's configuration guidance to prevent interoperability problems.
अनुशंसित
Network Speaker
The WM8351CGEB/RV can serve as the audio conversion and local power-management element in a network speaker. Two DAC channels support stereo playback from a network or local digital audio source, while the integrated regulator functions can coordinate the required analog and digital rails. The 7 mm by 7 mm FBGA package supports compact designs, but thermal design must consider both codec dissipation and the external speaker amplifier. Use controlled-impedance routing for digital interfaces and maintain separation between microphone, amplifier, and supply-return paths to minimize audible noise coupling.
अनुशंसित
Audio Test and Measurement
The WM8351CGEB/RV can be evaluated as a stereo audio input and output stage in compact test equipment or audio prototyping systems. Its 12-bit converters, 48 kHz maximum sampling rate, and 95 dB typical signal-to-noise ratios make it suitable for functional audio-path validation. The separate 2.5 V to 3.6 V analog and 1.71 V to 3.6 V digital supplies also enable deliberate rail-domain testing. For measurement-grade results, use low-noise reference supplies, characterize the board's grounding, and distinguish codec performance from external amplifier or connector limitations.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा WM8351CGEB/RV — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | WM8351CGEB/V |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 129-FBGA, 7 mm x 7 mm | 129-FBGA, 7 mm x 7 mm |
| Product Type | Stereo audio codec with power management | Stereo audio codec with power management |
मुख्य विशेषताएँ
- Stereo conversion and power management in one device (बनामWM8351CGEB/V)
- Compact 7 mm by 7 mm package (बनामWM8351CGEB/V)
- Defined conversion performance and supply flexibility (बनामWM8351CGEB/V)
डिज़ाइन नोट्स
Follow the manufacturer 129-FBGA footprint and ball map exactly, including any exposed thermal connection. Place the required input, output, and supply-bypass capacitors directly beside their associated balls so that high-current return paths do not share long traces with sensitive audio nets. Verify pad dimensions, solder-mask definition, and thermal-via requirements against the package drawing before releasing the PCB artwork.
Separate analog and digital supply distribution as far as practical, then define their connection or return strategy according to the manufacturer's reference layout. Keep microphone and line-input traces away from speaker-amplifier outputs, switching-node connections, and high-current supply paths. A continuous ground reference beneath the codec can help control return-current paths, but thermal requirements for the exposed pad must remain satisfied.
Design the 2.5 V to 3.6 V analog and 1.71 V to 3.6 V digital rails for their actual sequencing rather than assuming they can rise simultaneously. Use the manufacturer start-up timing, capacitor recommendations, and permitted rail combinations. Estimated: total codec dissipation is the sum of each rail voltage multiplied by its current; compare that result with the package thermal model and the adjacent amplifier dissipation in enclosed enclosures.
Do not assume that the /RV and /V ordering suffixes are production-equivalent without checking temperature grade, reel orientation, and marking. Likewise, do not substitute a functionally similar audio codec into the same PCB unless all 129 balls, supply sequencing, clocking, analog routing, and software-control interfaces have been compared. A 7 mm by 7 mm BGA footprint also requires inspection tooling and appropriate assembly capability.
अनुपालन जानकारी
The exact-device product summary does not state the required environmental or material compliance values. A related result mentions RoHS for potential alternatives, but that statement was not applied to the WM8351CGEB/RV without exact-device confirmation.