Cirrus Logic Inc.

WM8351CGEB/RV - Stereo Audio Codec | Cirrus Logic

MPN: WM8351CGEB/RV ✓ Aktif
2.5 V to 3.6 V Vdss 129-FBGA, 7 mm x 7 mm Package
MOQ: 1 |

WM8351CGEB/RV Ringkasan

The Cirrus Logic WM8351CGEB/RV is a stereo audio codec with integrated power management, supporting 48 kHz audio processing, 12-bit conversion, two ADCs, and two DACs. It is supplied in a 129-ball FBGA package measuring 7 mm by 7 mm. The device is intended for compact embedded systems where audio conversion, headphone or speaker amplification, and multiple regulated power rails are required in one package.

An audio codec is an interface integrated circuit that converts digital audio data into an analog signal and converts analog audio back into digital data. The WM8351 belongs to the broader hierarchy of audio interface ICs, mixed-signal semiconductors, and embedded power-management devices. Integrating codec and power-management functions can reduce the number of separate components required around an application processor while centralizing analog routing and supply sequencing.

The WM8351CGEB/RV supports sampling rates up to 48 kHz and uses sigma-delta conversion for its two ADC and two DAC channels. The manufacturer specification lists a typical signal-to-noise ratio of 95 dB for both the ADC and DAC paths. Its analog supply range is 2.5 V to 3.6 V, while its digital supply range is 1.71 V to 3.6 V, allowing digital-interface and analog-circuit rails to be adjusted independently within their specified limits.

Integrated power management is a major architectural feature of this codec. It allows an embedded audio system to consolidate analog, digital, and amplifier-related supply functions under the control of one audio subsystem IC. The result can be a smaller board footprint and a more structured power-up sequence than a design using several unrelated regulators. Designers should still account for startup timing, supply ramp behavior, and load transients when planning the system power architecture.

Typical uses include portable media players, smart-home audio endpoints, communication equipment, industrial control panels, and other embedded platforms requiring stereo playback and record capability. The 12-bit converters and 48 kHz maximum rate are appropriate for general-purpose voice and music pathways, although the manufacturer's datasheet should be consulted for application-specific signal quality, clocking, and filter requirements.

Layout is critical because the WM8351CGEB/RV combines a 129-ball FBGA with sensitive analog and digital circuitry. Place decoupling capacitors close to the associated supply balls, keep analog and digital return paths separate until their planned grounding point, and follow the package-specific ball map for exposed-pad and thermal connections. This page combines package, conversion, supply, sourcing, and drop-in replacement information for faster engineering review.

Pilihan pengganti yang segera untuk WM8351CGEB/RV — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera WM8351CGEB/RV (sama faktor bentuk dan kaki) — berbeza dalam Product Type.

Cirrus Logic Inc.
Product Type: Stereo audio codec with integrated power management

WM8351CGEB/V

✅ Masuk Drop-In
Cirrus Logic Inc.
📦 129-FBGA, 7 mm x 7 mm
Stereo audio codec with integrated power management · 2 channels · 2 channels · 24 bit · 48 kHz · 129-pin FBGA · Surface mount · Cirrus Logic

Hubungi untuk harga

WM8351CGEB/RV Penilaian maksimum & Ciri-ciri Elektrik

Product Type Stereo audio codec with power management
Maximum Sampling Rate 48 kHz
Converter Resolution 12 bit
ADC Count 2
DAC Count 2
Conversion Architecture Sigma-delta
ADC Signal-to-Noise Ratio 95 dB typical
DAC Signal-to-Noise Ratio 95 dB typical
Analog Supply Voltage Range 2.5 V to 3.6 V
Digital Supply Voltage Range 1.71 V to 3.6 V
Kemasan 129-FBGA, 7 mm x 7 mm
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin WM8351CGEB/RV 129-fbga, 7 mm x 7 mm

Konfigurasi pin untuk WM8351CGEB/RV (129-fbga, 7 mm x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 129-fbga, 7 mm x 7 mm untuk WM8351CGEB/RV

Tiada data garisan pin yang diperoleh untuk WM8351CGEB/RV.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

WM8351CGEB/RV patut untuk 6 aplikasis: Portable Media Player, Smart Home Audio Endpoint, Industrial Control Panel, Communication Equipment, Network Speaker, Audio Test and Measurement.

📱

Portable Media Player

The WM8351CGEB/RV fits portable media-player designs that require playback and recording in one compact subsystem. Its two DAC channels support stereo audio output, while two ADC channels provide a stereo capture path. The 12-bit converters operate up to 48 kHz, and the 1.71 V to 3.6 V digital supply range supports low-voltage processor interfaces. Its integrated power-management architecture can reduce the number of separate audio supply devices, although the designer must confirm amplifier loads, startup timing, and board-level thermal conditions before finalizing the power budget.

🧩

Smart Home Audio Endpoint

The WM8351CGEB/RV is suitable for connected audio endpoints that combine local playback with microphone capture. Its two ADC channels can support a stereo or dual-microphone input arrangement, while the dual DAC paths provide conventional stereo output. A 48 kHz maximum rate and 95 dB typical ADC and DAC signal-to-noise ratios align with general-purpose voice and music applications. Integrating power management with the codec can simplify rail management, but microphone biasing, analog grounding, and pop-noise control remain board-level design responsibilities.

🏭

Industrial Control Panel

The WM8351CGEB/RV can support audio notification and voice feedback in an industrial control panel. Its separate analog and digital supply ranges provide flexibility for systems operating a low-voltage digital processor rail and a 2.5 V to 3.6 V analog rail. The two ADC channels can accept panel microphones or line-level inputs, while two DAC channels can drive an external amplifier. Because industrial environments may introduce electrical noise and temperature extremes, the implementation should include appropriate filtering, grounding, shielding, and verified operating-temperature margins.

🌐

Communication Equipment

The WM8351CGEB/RV is applicable to communication equipment requiring local monitoring and playback alongside a digital signal processor or application processor. The sigma-delta ADC and DAC channels support 12-bit audio at rates up to 48 kHz, which is useful for voice monitoring, call audio, or configurable-rate audio interfaces. Its integrated power-management section may simplify supply coordination within compact embedded modules. Clocking, interface format, channel routing, and synchronization must be checked against the manufacturer's configuration guidance to prevent interoperability problems.

🔊

Network Speaker

The WM8351CGEB/RV can serve as the audio conversion and local power-management element in a network speaker. Two DAC channels support stereo playback from a network or local digital audio source, while the integrated regulator functions can coordinate the required analog and digital rails. The 7 mm by 7 mm FBGA package supports compact designs, but thermal design must consider both codec dissipation and the external speaker amplifier. Use controlled-impedance routing for digital interfaces and maintain separation between microphone, amplifier, and supply-return paths to minimize audible noise coupling.

🔧

Audio Test and Measurement

The WM8351CGEB/RV can be evaluated as a stereo audio input and output stage in compact test equipment or audio prototyping systems. Its 12-bit converters, 48 kHz maximum sampling rate, and 95 dB typical signal-to-noise ratios make it suitable for functional audio-path validation. The separate 2.5 V to 3.6 V analog and 1.71 V to 3.6 V digital supplies also enable deliberate rail-domain testing. For measurement-grade results, use low-noise reference supplies, characterize the board's grounding, and distinguish codec performance from external amplifier or connector limitations.

Where can I buy WM8351CGEB/RV online?
The WM8351CGEB/RV can be requested through the Request a Quote form on this product page. The exact device is listed as a Cirrus Logic stereo audio codec with integrated power management in a 129-FBGA package. Buyers should confirm the /RV suffix, reel configuration, quantity, and delivery requirements when submitting the request so that the supplied configuration matches the target design.
What is the price of WM8351CGEB/RV?
Current commercial terms for the WM8351CGEB/RV are handled through the Request a Quote form on this page. The request should identify the required quantity, target reel or tray orientation, and shipment destination. This approach keeps the commercial response tied to the exact /RV ordering code rather than a broadly related WM8351 configuration.
What is the lead time for WM8351CGEB/RV?
The current lead time for WM8351CGEB/RV should be confirmed through the Request a Quote form on this page. Exact lead time can depend on order quantity, package orientation, production availability, and destination. Including the intended quantity and delivery schedule in the request enables the supplier to return a matching quotation and realistic schedule.
Is WM8351CGEB/RV currently in stock?
The WM8351CGEB/RV is shown as in stock in current product listings, but allocation can change with order volume. Use the Request a Quote form on this page to request current availability for the exact /RV suffix. Include your required quantity, packaging orientation, target date, and shipping destination so the response reflects the configuration you intend to purchase.
What are the key specifications of WM8351CGEB/RV that engineers should know?
The WM8351CGEB/RV is a 48 kHz, 12-bit stereo audio codec with two ADCs, two DACs, sigma-delta conversion, and integrated power management. According to the manufacturer specification, it provides a typical 95 dB signal-to-noise ratio for each conversion path. It accepts a 2.5 V to 3.6 V analog supply and a 1.71 V to 3.6 V digital supply in a 129-FBGA package.
What is the difference between WM8351CGEB/RV and WM8351CGEB/V?
Both WM8351CGEB/RV and WM8351CGEB/V identify the same WM8351 stereo codec family and are listed in the 129-FBGA package family. The ordering suffix distinguishes the supplied configuration, but the available technical information does not quantify every suffix-specific difference. Confirm the temperature grade, reel orientation, and marking requirements against the manufacturer datasheet before treating one as a replacement for the other.
When should I choose WM8351CGEB/RV over another audio codec?
Choose the WM8351CGEB/RV when a design needs both stereo 12-bit conversion and integrated power management in a compact 7 mm by 7 mm FBGA. It is particularly suitable for 48 kHz general-purpose audio pathways using an analog supply of 2.5 V to 3.6 V and a digital supply of 1.71 V to 3.6 V. Choose another codec only when its interface, converter performance, power architecture, or package does not require a board change.
Is WM8351CGEB/RV suitable for portable audio equipment?
The WM8351CGEB/RV can suit portable audio equipment when the system operates within its 2.5 V to 3.6 V analog and 1.71 V to 3.6 V digital supply limits. Its integrated power management can simplify supply coordination and reduce board area, but designers must still verify startup behavior, amplifier load capability, thermal performance, and total board-level power consumption.
What can replace WM8351CGEB/RV?
WM8351CGEB/V is the closest identified same-base alternative because it belongs to the WM8351 family and uses the same 129-FBGA package family. However, the available technical data does not fully quantify suffix-specific temperature, reel-orientation, or marking differences. Confirm those details in the manufacturer datasheet before substituting it into production hardware.
Is WM8351CGEB/RV the same as WM8351CGEB/V?
The WM8351CGEB/RV and WM8351CGEB/V share the WM8351 base designation and stereo audio codec function, but the ordering suffixes are not necessarily interchangeable without a configuration review. Check the manufacturer datasheet for the specific temperature grade, tape-and-reel orientation, and device-marking requirements. Mechanical board compatibility alone does not guarantee an acceptable procurement configuration.
Where can I download the WM8351CGEB/RV datasheet PDF?
The WM8351CGEB/RV datasheet PDF is available through the datasheet link on this page and through the listed Wolfson Microelectronics document mirror. The document describes the Stereo Codec with Power Management and contains the device pin, electrical, and application information. Use the ball-assignment table in that document when assigning PCB tracks or checking the 129-FBGA footprint.
Where can I find the WM8351CGEB/RV pinout?
The WM8351CGEB/RV pin assignment is documented in the manufacturer datasheet under the 129-FBGA package and pin-description material. Because the exact ball-level map is not published in the product summary, use the datasheet's package drawing and pin table when defining the PCB footprint. In particular, verify supply balls, ground connections, analog inputs and outputs, digital interfaces, and the exposed thermal connection.
What is the best Cirrus Logic equivalent for WM8351CGEB/RV?
WM8351CGEB/V is the best identified Cirrus Logic alternative for WM8351CGEB/RV because it uses the same WM8351 family designation and 129-FBGA package family. Its suitability still depends on matching the suffix-specific ordering requirements and confirming that all electrical functions remain unchanged. Cross-brand audio codecs with similar functionality cannot be treated as drop-in replacements without a complete ball-map and electrical comparison.
What power supplies does WM8351CGEB/RV require?
The WM8351CGEB/RV requires an analog supply within 2.5 V to 3.6 V and a digital supply within 1.71 V to 3.6 V. These ranges allow separate treatment of analog and digital power domains while keeping both within the device's specified operating limits. Follow the manufacturer datasheet for capacitor values, startup sequencing, permitted rail combinations, and power-control details.
How much power does the WM8351CGEB/RV codec dissipate?
The maximum power dissipation for WM8351CGEB/RV is not stated in the product summary, so it must be established from the manufacturer datasheet and the actual rail and load conditions. Estimated: power loss equals the sum of each supply voltage multiplied by its measured current, including converter and amplifier loads. Apply the resulting dissipation to the 129-FBGA thermal model rather than treating the package as ideal.

Data referensi kejuruteraan untuk WM8351CGEB/RV — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the WM8351CGEB/RV for a compact embedded design that combines stereo recording and playback with integrated power management. Its two ADC and two DAC channels, 12-bit resolution, 48 kHz maximum sampling rate, and separate analog and digital supply ranges are suitable for portable media, network audio, communication equipment, and compact industrial controls. Choose WM8351CGEB/V when that exact suffix satisfies the required temperature grade, reel orientation, and marking, after confirming those details in the manufacturer datasheet. Avoid choosing another codec solely by advertised sample rate or converter resolution: a true drop-in decision also requires the 129-FBGA ball map, supply sequencing, clocking, analog signal routing, and control interface to match. For designs requiring a different package, rail, interface, or channel count, undertake a full schematic and PCB redesign rather than treating a similar codec as interchangeable.

Perbandingan dengan Gantian

Parametr Produk Ini WM8351CGEB/V
Brand Cirrus Logic Cirrus Logic
Package 129-FBGA, 7 mm x 7 mm 129-FBGA, 7 mm x 7 mm
Product Type Stereo audio codec with power management Stereo audio codec with power management

Penyeberangsung Jelas

  • Stereo conversion and power management in one device (vsWM8351CGEB/V)
  • Compact 7 mm by 7 mm package (vsWM8351CGEB/V)
  • Defined conversion performance and supply flexibility (vsWM8351CGEB/V)

Catatan Desain

Follow the manufacturer 129-FBGA footprint and ball map exactly, including any exposed thermal connection. Place the required input, output, and supply-bypass capacitors directly beside their associated balls so that high-current return paths do not share long traces with sensitive audio nets. Verify pad dimensions, solder-mask definition, and thermal-via requirements against the package drawing before releasing the PCB artwork.

Separate analog and digital supply distribution as far as practical, then define their connection or return strategy according to the manufacturer's reference layout. Keep microphone and line-input traces away from speaker-amplifier outputs, switching-node connections, and high-current supply paths. A continuous ground reference beneath the codec can help control return-current paths, but thermal requirements for the exposed pad must remain satisfied.

Design the 2.5 V to 3.6 V analog and 1.71 V to 3.6 V digital rails for their actual sequencing rather than assuming they can rise simultaneously. Use the manufacturer start-up timing, capacitor recommendations, and permitted rail combinations. Estimated: total codec dissipation is the sum of each rail voltage multiplied by its current; compare that result with the package thermal model and the adjacent amplifier dissipation in enclosed enclosures.

Do not assume that the /RV and /V ordering suffixes are production-equivalent without checking temperature grade, reel orientation, and marking. Likewise, do not substitute a functionally similar audio codec into the same PCB unless all 129 balls, supply sequencing, clocking, analog routing, and software-control interfaces have been compared. A 7 mm by 7 mm BGA footprint also requires inspection tooling and appropriate assembly capability.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The exact-device product summary does not state the required environmental or material compliance values. A related result mentions RoHS for potential alternatives, but that statement was not applied to the WM8351CGEB/RV without exact-device confirmation.

Pencarian Berhubungan

WM8351CGEB/RV WM8351CGEB/RV datasheet WM8351CGEB/RV datasheet pdf WM8351CGEB/RV pinout WM8351CGEB/RV package Cirrus Logic WM8351CGEB/RV WM8351CGEB/RV 129 FBGA WM8351CGEB/RV replacement WM8351CGEB/RV equivalent WM8351CGEB/RV vs WM8351CGEB/V WM8351CGEB/RV price WM8351CGEB/RV stock WM8351 stereo audio codec WM8351 power management codec

Komponen dan Tanda berkaitan

Cirrus Logic Wolfson Microelectronics WM8351CGEB/RV WM8351CGEB/V WM8351 stereo audio codec audio interface IC mixed-signal IC power-management IC sigma-delta converter ADC DAC 12-bit conversion 48 kHz sampling 95 dB signal-to-noise ratio analog supply digital supply 129-FBGA 7 mm by 7 mm package BGA package family surface-mount semiconductor embedded audio subsystem portable media player network speaker industrial control panel
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ